Scribd
Upload
278 views38 pages

Elements of Microcontroller Ecosystem, Power Supply For ES

This document provides an overview of key elements in a microcontroller ecosystem including power supply, clock, reset, and program download capability. It discusses selecting a microcontroller based on peripheral features, memory, and price. Linear regulators and switching regulators are described as options for voltage stabilization from power sources like batteries or the grid. Modern systems may use multiple power rails requiring both linear and switched supplies. Power optimization focuses on active, sleep, and power down modes. Batteries and supercapacitors can provide power backup when primary sources are intermittent.

Uploaded by

Ambuj Singh Kushwaha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
278 views38 pages

Elements of Microcontroller Ecosystem, Power Supply For ES

This document provides an overview of key elements in a microcontroller ecosystem including power supply, clock, reset, and program download capability. It discusses selecting a microcontroller based on peripheral features, memory, and price. Linear regulators and switching regulators are described as options for voltage stabilization from power sources like batteries or the grid. Modern systems may use multiple power rails requiring both linear and switched supplies. Power optimization focuses on active, sleep, and power down modes. Batteries and supercapacitors can provide power backup when primary sources are intermittent.

Uploaded by

Ambuj Singh Kushwaha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 38

Introduction to Embedded

System Design
Lecture - 4: Elements of Microcontroller
Ecosystem, Power Supply for Embedded
Systems

Dhananjay V. Gadre Badri Subudhi


Associate Professor Assistant Professor
ECE Division Electrical Engineering Department
Netaji Subhas University of Indian Institute of Technology,
Technology, New Delhi Jammu
Elements of
Microcontroller Ecosystem
“Roti, Kapda, Makaan and
Internet” for a Microcontroller!
(Essential Elements for Survival)

● Clock

● Reset

● Power Supply

● Program Download Capability


The Clock Subsystem!
● Why do we need Clock?
● What Should be the Clock Frequency?
● Implications of Clock Frequency Value?
● What Topology for the Clock Generator?
● Desirable Features for the Clock Generator?
● RTC Clock?
● Clock Frequency Stabilization: TCXO, Temperature
Sensor + Varactor diode in parallel to Crystal.
Selecting a Suitable Embedded
Controller

● Peripheral Features
● Memory
● Packaging
● Grade (Commercial, Industrial, Automotive, Military)
● Price
● Availability and lead time

But most important!


Selecting a Suitable Embedded
Controller

Inter-sample Interval
A

Time
● Algorithm Complexity viz-a-viz Sampling Theorem Constraints
● Controller ‘A’ is unacceptable
● Controller ‘B’ is marginal
● Controller ‘C’ is comfortable!
The Reset Subsystem!
● Why do we need Reset?

● Sources of Reset?

● Warm and Cold Reset?

● POR, User, BOD and Watchdog.


User Reset
Program Download
Capability
● Older Methods (EPROM Eraser +
Universal Device Programmer).
● Evolution of Flash Memory → ISP.
● Most Popular using SPI.
● JTAG: Dual use. Testing as well as
Program Download
● SWD
● IAP using Bootloader.
● UPM + BPM.
Power Supply for microcontrollers
Power Supply: An
Important Component
● Source of Power? – Grid, Battery or
alternative?
● Stabilization (Voltage Regulation)
● Backup?
● Optimization- modes of operation
Power Supply: An
Important Component
Alternative sources:
● Solar (Photovoltaic, Thermoelectric)
● Hydro
● Vibration/Resonance based on Faraday law
● Ambient RF power conversion.
Grid Power
● AC Step down → Rectifier.
● Polarity proof input stage.
● Instead of step-down transformer,
How about capacitive voltage
divider option? Advantages?
● Switching Mode Supply?
● Filtering
Low Voltage AC Input:
Polarity Safe or Polarity Proof
Input Stage
Voltage Regulators

● Linear Regulator
● Switching Regulator
Voltage Stabilization
● Linear Regulators- Ease of use, cheap, low
component count. The classic 78xxx series.
Issues? Large Dropout voltage, Large quiescent
current I(q).
● Use Low Drop Out (LDO) linear regulators.
● Low Quiescent Current too.
Linear Regulator
Topologies
Linear Regulator
Topologies
Linear Regulator
Topologies
Linear Regulator
Topologies
Linear Regulator
Topologies
3-Terminal Linear
Regulator
Linear Regulators
● The classic 7805 is history.
● Why? 5V no longer voltage of choice.
● Large Drop out voltage (3V or more)
● Large Quiescent Current – 10 mA.
● Alternatives?
LDO! 0.1V drop out, 10-100uA Quiescent Current
Examples: LP2950 (2.7, 3, 3.3V etc)
LP38500-ADJ 0.6V dropout.
Switching Regulators
● Advantages: 90%+ efficiency
● Pitfalls: Inductor, switching diode, high
current switch.
● Lower ESR output capacitor
● Relatively large output noise.
● Type depends on input voltage
availability and output voltage
requirements.
Switching Regulators - II
● Broadly 3 categories: Buck, Boost, Buck-boost.
● Buck: V(out) < V(in); I(out) > I(in)
● Buck example: LM2575 (1A max); LM2576 (3A
max.)
Switching Regulators - III
● Boost: V(out) >= V(in); I(out) < I(in)
● TPS61070; V(in) 0.9V to 5.5V; V(out) <5.5V (adjustable);
Switch Current: 600mA
● LT1308: V(in): 1V to 10V; Vout < 34V. Switch Current:
3A.
Switching Regulators - IV
● Buck-Boost:

Vin(min) < V(out) <


Vin(max)

● Buck-Boost
example: LM3668.

V(in) 2.5V to 5.5V.


Vout: 2.8V or 3.3V
(fixed). I(max): 1A.
Switching Cell Phone
Charger
• E(avg)= 4*f*N*a*B
Various Power Supply
Topologies
● Line Frequency Transformer + Linear (fixed or
variable) regulator
● Line Frequency Transformer + switching (buck
or boost) regulator
● Switching Power Supply
● Capacitive attenuator + Zener
● Alkaline + Boost/Buck
Various Power Supply
Topologies - II
● Lithium + Boost (for 5V)
● Lithium + Buck-Boost (3.3V)
● Lithium + Boost for 5V and Buck/LDO for 3.3V
● Radio Frequency based Ultra low power
● Faraday based
● Solar + Battery + Regulator
● Vibration resonance (http://www.perpetuum.com/)
● Thermoelectric (TEG) based
Modern ICs
● Partitioned Design
● Speed Versus Noise Margin trade off
● Analog Subsystem
● All the above leads to multiple power supply
rails.
Linear Power Supply for
Embedded Processors
Linear + Switched Power Supply
for Embedded Processors
Power Optimization
Broadly 3 Levels of power consumption
● Active mode – full power and performance
● Sleep mode – Oscillator On, synchronous components off.
Asynchronous On. Interrupts, RTC etc On. System Restart
fairly quickly. Power consumption about half of active mode.
● Power Down mode – 1/1000 of active power. All components
power down; Only asynchronous components – interrupts On.
Restart is slow and requires oscillator startup ~ several 100s of
ms.
Power Backup Sources
Sporadic availability of power. Need to smoothen out
the availability.
● Batteries – Lead-acid, NiCd, NiMH, Li, Li-poly
● Supercapacitors?
Battery Characteristics
Type Voltag Power( Eff. Cycles Life
e (V) W/Kg) (yr)
Lead-Aci 2.1 180 70-90 500-80 3-20
d 0
NiCd 1.2 150 70-90 1500 -

NiMH 1.2 250-10 66% 1000 -


00
Li ion 3.6 1800 99.9 1200 2-3

Li-poly 3.6 3000+ 99.8 500-10 2-3


00
Lecture - 4 Summary
Thank you!

You might also like