Geometric Figures

Cylinders, Boxes, Cones, Planes, Spheres, Lines, Curves and more..

  Bended Rod - Add a bended rod to your model

  Bezier Curve - Inserts a 4 points Bezier Curve to the Sketchup model

  Bezier Curve - in Equal

Segments - A 4 points Bezier Curve split in a custum no. of segments with equal lengths.
This tool can be useful when constructing walkable U- and L-shaped stairs

  Catenary Curve - A Catenery Curve - hanging flexible wire or chain, arch

or shape of road

  Circle - with any number of Segments - Make circles with more (or less)
than Sketchup's default 24 segments - add radial lines

  Circular - Spiral Curves - Add circular or spiral curves to the model

  Cone - Insert a concentric volume to the model.

  Cube - A cube is a three-dimensional solid object bounded by six square

faces.

  Cylinder - Double Wall - A double walled cylinder - open in both ends.

  Cylinder - Single Wall - A single walled cylinder - both ends closed.

  Ellipse - Ellipse - made from parameters

  Equilateral Tetrahedron - A three-dimensional figure with four equilateral

triangles

  Exponential Function - Lines made from exponential functions

  Grid - Add a grid to your Sketchup model

  Line - A line inserted as a group

  Lines or Curves made from Lists with Custom Points - Make a collection
of lines based on a list of custom points

  Plane - Horizontal - Horizontal plane with variable thickness

   Plane - Vertical - Vertical planes with variable thickness.

  Polygon - A horizontal surface composed of a finite sequence of straight

line segments.

  Quadratic Equation - Parabola - Lines - parabolas - made from quadratic

equations

  Rectangular Box - Rectangular box - prism or cuboid

  Sphere - Sphere or ball

  Sphere with Longtitude and Latitude Lines - Sphere made of longtitude

and latitude lines

  Spurs and Gears - Replicates a custom component around a circle or

parts of a circle

Pipes and Tubes

Steel, Copper, Plastic pipes and tubes ...

  ASME/ANSI B36.10 - Welded and Seamless Wrought Steel Pipes -

Imperial Units - American National Standard welded and seamless wrought steel pipe -
imperial units
  ASME/ANSI B36.19 - Welded and Seamless Stainless Steel Pipes -
Imperial Units - Standard Specification for General Requirements for Welded and
Seamless Stainless Steel Pipes

  ASTM B 42 - Seamless Copper Pipes - Imperial Units - Standard

Specification for General Requirements for Wrought Seamless Copper and Copper- Alloy
Tube

  ASTM B 43 - Seamless Red Brass Pipes - Imperial Units - Standard

Specification for General Requirements for Red Brass Tubes

  ASTM B221 - Aluminum and Aluminum-Alloy Seamless Pipes and

Seamless Extruded Tubes - Imperial Units - Standard Specification for Aluminum and
Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

  ASTM B88M - Copper Tubes Type A - Metric Units - Dimensions and

weights of copper tubes type A - metric units (mm)

  ASTM B88M - Copper Tubes Type B - Metric Units - Dimensions and

weights of copper tubes type B - metric units (mm)

  ASTM B88M - Copper Tubes Type C - Metric Units - Dimensions and

weights of copper tubes type C - metric units (mm)

  ASTM D1785 - Thermoplastic Pipes Schedule 40 - Imperial Units -

Dimensions and weights of thermoplastic pipe schedule 40 - Imperial Dimensions

  ASTM D1785 - Thermoplastic Pipes Schedule 80 - Imperial Units -

Dimensions and weights of thermoplastic pipe schedule 80 - Imperial Dimensions
   Bended Pipe or Tube - Customized Angles and Dimensions - Add bend or
elbows with custom dimensions

  EN 10255 - Steel Tubes - Metric Units - Steel tubes, tubulars conforming
to IS: 1239-1990 equivalent to BS:1387-1987, IS:1161-1998 - metric units (mm)

  IS 3589 - Steel Pipes for Water and Sewage - Metric Units - Pipes
conforming to Indian standard IS 3589 Steel Pipes for Water and Sewage

  IS 4270 - Steel Tubes Used for Water Wells - Metric Units - Pipes
conforming to Indian standard IS 4270-2001 - metric units (mm)

Elbows and Bends

Piping bends and elbows

  ASME/ANSI B16.9 - Butt Welded Long Radius 45 deg Elbows - Imperial

Units - Wall thickness : Standard, Extra Strong, Schedule 160 and Double Extra Strong
   ASME/ANSI B16.9 - Butt Welded Long Radius 90 deg Elbows - Imperial
Units - Wall thickness, Standard, Extra Strong, Schedule 160 and Double Extra Strong

  ASME/ANSI B16.9 - Butt Welded Short Radius 45 deg Elbows - Imperial

Units - Wall thickness : Standard, Extra Strong, Schedule 160 and Double Extra Strong

  ASME/ANSI B16.9 - Butt Welded Short Radius 90 deg Elbows - Imperial

Units - Wall thickness : Standard, Extra Strong, Schedule 160 and Double Extra Strong

  ASME/ANSI B16.9 - Stainless Steel Long Radius 45 deg Elbows - Imperial

Units - Dimensions for ANSI B16.9 Stainless Steel long radius 45 degrees elbows

  ASME/ANSI B16.9 - Stainless Steel Long Radius 90 deg Elbows - Imperial

Units - Dimensions for ANSI B16.9 Stainless Steel long radius 90 degrees elbows

  ASME/ANSI B16.9 - Stainless Steel Short Radius 45 deg Elbows -

Imperial Units - Dimensions for ANSI B16.9 Stainless Steel short radius 45 degrees
elbows

  ASME/ANSI B16.9 - Stainless Steel Short Radius 90 deg Elbows -

Imperial Units - Dimensions for ANSI B16.9 Stainless Steel short radius 90 degrees
elbows

  Bended Pipe or Tube - Customized Angles and Dimensions - Add bend or

elbows with custom dimensions

Reducers
Concentric and eccentric reducers

  ASME B16.9 - Butt Welded Concentric Reducers - Imperial Units - Butt

welded concentric reducers
   ASME B16.9 - Butt Welded Eccentric Reducers - Imperial Units - Butt
welded eccentric reducers

Tees
Piping tees

  ASME B16.9 - Butt Welded Reducing Outlet Tees - Imperial Units -

Reducing outlet butt welded tees according ASME B.16.9 - outside dimensions valid for all
schedules

  ASME B16.9 - Butt Welded Straight Tees - Imperial Units - Straight butt
welded tees according ASME B-16.9 - outside dimensions valid for all schedules

Flanges

 AS 2129 - Blind Flanges with Flat Faces Table D - Australien AS 2129 Table D
blind flanges with flat faces
  AS 2129 - Blind Flanges with Raised Faces Table D - Australien AS 2129
Table D blind flanges with raised faces

  AS 2129 - Plate Flanges with Flat Faces Table D - Australien AS 2129 Table
D plate flanges with flat faces

  AS 2129 - Plate Flanges with Raised Faces Table D - Australien AS 2129
Table D plate flanges with raised faces

  ASME B16.5 - Blind Flanges - 150 lbs - Blind flanges ASME B16.5

  ASME B16.5 - Blind Flanges - 1500 lbs - Blind flanges ASME B16.5

  ASME B16.5 - Blind Flanges - 2500 lbs - Blind flanges ASME B16.5 - 2500
lbs

  ASME B16.5 - Blind Flanges - 300 lbs - Blind flanges ASME B16.5

  ASME B16.5 - Blind Flanges - 400 lbs - Blind flanges ASME B16.5 - 400
lbs

  ASME B16.5 - Blind Flanges - 600 lbs - Blind flanges ASME B16.5

  ASME B16.5 - Blind Flanges - 900 lbs - Blind flanges ASME B16.5
   ASME B16.5 - Slip-on Flanges - 150 lbs - Slip-on ASME B16.5
FLanges 150 lbs


  ASME B16.5 - Slip-on Flanges - 1500 lbs - Slip-on ASME B16.5 FLanges
1500 lbs

  ASME B16.5 - Slip-on Flanges - 2500 lbs - Slip-on ASME B16.5 FLanges
2500 lbs

  ASME B16.5 - Slip-on Flanges - 300 lbs - Slip-on ASME B16.5 FLanges
300 lbs

  ASME B16.5 - Slip-on Flanges - 400 lbs - Slip-on ASME B16.5 FLanges
400 lbs

  ASME B16.5 - Slip-on Flanges - 600 lbs - Slip-on ASME B16.5 FLanges
600 lbs

  ASME B16.5 - Slip-on Flanges - 900 lbs - Slip-on ASME B16.5 FLanges
150 lbs

  ASME B16.5 - WN Welding Neck Flanges - 150 lbs - Welding Neck ASME
B16.5 FLanges 150 lbs

  ASME B16.5 - WN Welding Neck Flanges - 1500 lbs - Welding Neck ASME
B16.5 FLanges 1500 lbs

  ASME B16.5 - WN Welding Neck Flanges - 2500 lbs - Welding Neck ASME
B16.5 FLanges 2500 lbs

  ASME B16.5 - WN Welding Neck Flanges - 300 lbs - Welding Neck ASME
B16.5 FLanges 300 lbs
  ASME B16.5 - WN Welding Neck Flanges - 400 lbs - Welding Neck ASME
B16.5 FLanges 400 lbs

  ASME B16.5 - WN Welding Neck Flanges - 600 lbs - Welding Neck ASME
B16.5 FLanges 600 lbs

  ASME B16.5 - WN Welding Neck Flanges - 900 lbs - Welding Neck ASME
B16.5 FLanges 900 lbs

  DIN 2502 - Plate Flanges PN16 - Dimension and weight of DIN 2502
Plate Flanges PN16

  DIN 2503 - Plate Flanges PN25 - Dimension and weight of DIN 2503
Plate Flanges PN25

  DIN 2573 - Plate Flanges PN6 - Dimension and weight of DIN2573 PN6
Plate Flange

  DIN 2576 - Plate Flanges PN10 - Dimension and weight of DIN 2576
Plate Flanges PN10

  DIN 2627 - Welding Neck Flanges PN400/400BAR - Dimensions, sizes

and specifications of DIN 2627 Welding Neck Flanges PN400/400BAR

  DIN 2628 - Welding Neck Flanges PN250/250BAR - Dimensions, sizes

and specifications of DIN 2628 Welding Neck Flanges PN250/250BAR

  DIN 2629 - Welding Neck Flanges PN320/320BAR - Dimensions, sizes

and specifications of DIN 2629 Welding Neck Flanges PN320/320BAR
  DIN 2630 - Welding Neck Flanges PN2.5/2.5BAR - Dimensions, sizes and
specifications of DIN 2630 Welding Neck Flanges PN2.5/2.5BAR

  DIN 2631 - Welding Neck Flanges PN6/6BAR - Dimensions, sizes and

specifications of DIN 2631 Welding Neck Flanges PN6/6BAR

  DIN 2632 - Welding Neck Flanges PN10/10BAR - Dimensions, sizes and

specifications of DIN 2632 Welding Neck Flanges PN10/10BAR

  DIN 2633 - Welding Neck Flanges PN16/16BAR - Dimensions, sizes and

specifications of DIN 2633 Welding Neck Flanges PN16/16BAR

  DIN 2634 - Welding Neck Flanges PN25/25BAR - Dimensions, sizes and

specifications of DIN 2634 Welding Neck Flanges PN25/25BAR

  DIN 2635 - Welding Neck Flanges PN40/40BAR - Dimensions, sizes and

specifications of DIN 2635 Welding Neck Flanges PN40/40BAR

  DIN 2636 - Welding Neck Flanges PN64/64BAR - Dimensions, sizes and

specifications of DIN 2636 Welding Neck Flanges PN64/64BAR

  DIN 2637 - Welding Neck Flanges PN100/100BAR - Dimensions, sizes

and specifications of DIN 2637 Welding Neck Flanges PN100/100BAR

  DIN 2638 - Welding Neck Flanges PN160/160BAR - Dimensions, sizes

and specifications of DIN 2638 Welding Neck Flanges PN160/160BAR

  EN 1092-1 - Plane Flanges PN6 - From UNI EN 1092-1 Flanges and their
joints - Circular flanges for pipes, valves, fittings and accessories - PN designated
  EN 1092-1 - Type 11 Welding Neck Flanges PN10/10BAR  - Dimensions,
sizes and specifications of EN 1092-1 Type 11 Welding Neck Flanges PN10/10BAR

  EN 1092-1 - Type 11 Welding Neck Flanges PN16/16BAR  - Dimensions,

sizes and specifications of EN 1092-1 Type 11 Welding Neck Flanges PN16/16BAR

  EN 1092-1 - Type 11 Welding Neck Flanges PN6/6BAR - Dimensions,

sizes and specifications of EN 1092-1 Type 11 Welding Neck Flanges PN6/6BAR