CROCUS FO34/45M
Modem for fibre optic connectivity up to 45 Mbps
Wide range of exchangeable fibre optic modules for multi-mode and single-mode fibre
Multiple exchangeable data interfaces for connectivity to any type of application
Fully manageable using free maintenance software (TMA®)
Optional redundancy on the optical link
The Crocus FO34/45M is a high-speed modem designed for connecting end-user equipment
using optical fibre. Thanks to the field-exchangeable fibre modules, the Crocus FO34/45M can
be used for almost any type of fibre medium, ranging from short-haul multi-mode fibre, to the
long-haul single-mode fibre connection. When using a long-haul module, distances of over 70
km can easily be covered. The Crocus FO34/45M allows the user to connect at speeds
respectively up 45 Mbps, and can be terminated on almost any type of data interface. Not only
traditional serial interfaces like V.35, V.36, RS-530 and X.21 , but also G.703 E1 (transparent 2
Mbps or with G.704 framing), G.703 E3 (34 Mbps), G.703 T3 (45 Mbps) , HSSI (High Speed
Serial Interface) and direct Ethernet 10Base-T connections with integrated bridge or router
functionality are available. It is possible to combine different types of interfaces on the two sides
of the communication link, so eliminating the need for external interface conversion. All these
interface boards can be exchanged in only a few seconds, so flexibility is maximised. The actual
speed of the connection can be configured locally or centrally in multiples of 64 kbps (up to
2Mbps), in multiples of 2 Mbps (up to 10 Mbps), or for 34 and 45 Mbps. This makes the equipment
well suited for offering multiple user-speeds in carrier access environments.
For critical connections, it is possible to create 100% redundancy on the optical link by
inserting a second optical interface into the Crocus FO34/45M. This creates a complete 1-to-1
backup of the physical connection.
For large concentration sites, rack-mount versions are mounted in a standard 19 card-nest
and can offer densities of up to 30 modems per nest. Both 230/115 Vac and direct 48 Vdc
powering can be used.
In addition, all Crocus Modems in the network can be managed in an integrated way from an
SNMP based management platform (HP Openview®). An embedded auxiliary channel on the
communication link transmits the management information to remote modems rapidly and
efficiently. The integrated management allows one to configure the modem remotely, to query
the actual status of the modems, to permanently monitor the performance (real-time and statistical
information), to conduct fault analysis and to report alarms to the operator.
In order to improve efficiency during installation and to optimise the service on the installed
network Telindus offers a free Windows® based maintenance package. It is a valuable tool for the
field engineer as it supports full configuration and troubleshooting on both the local and remote
equipment. The Crocus FO34/45M also
offers a fully automatic installation mode,
which allows standard configurations to be
set up without the need to adjust one single
parameter.
The Crocus FO34/45M integrates
seamlessly with other Telindus access
equipment like the Crocus xDSL product
family. This includes integration into the
Modular Interfaces same rack-mounted shelf and use of the
same maintenance and management tools.
Typical applications for the Crocus
FO34/45M are in carrier access environments, railways and campus networks. The Crocus
FO34/45M is ideally suited for high-speed backbone access, LAN to LAN connectivity, as well as
for imaging and other bandwidth-demanding applications.
Free maintenance software
TECHNICAL SPECIFICATIONS
Front panel
Available basic modem units (without interfaces) Te s tlo o p s Ind ic atio ns
PWR Po we r
De s k to p (TT) AL Analo g ue Lo o p TST Te s t ind ic ato r (c irc uit 142)
Ty p e Numb e r o f mo d e ms
Rac k -mo unt (CV) RDL Re mo te Dig ital Lo o p ERR Bit Erro r Ind ic atio n (Erro r Te s t)-AIS fo r G. 703
DL Lo c al Dig ital Lo o p DCD A Data Carrie r De te c t fo r fib e r mo d ule A (c irc uit 109)
Cro c us FO45M TT BU 115/ 230V TT 1 ET Erro r Te s t g e ne rato r DCD B Data Carrie r De te c t fo r fib e r mo d ule B (c irc uit 109)
Cro c us FO45M TT BU 48V TT 1 (Te s t p atte rn 215-1) TXD Trans mit d ata (c irc uit 103)
Cro c us FO45M TWIN-CV BU CV 2 (1*) RXD Re c e iv e d ata (c irc uit 104)
*Re d uc e d to 1 mo d e m in c as e o f re d und ant c o nfig uratio n Supplementary features
Available optic modules · The modem has a flash memory to allow firmware upgrades
· Maintenance of local and remote modem with free Windows ® software
· Integrated network management module for HP OpenView®
Ty p ic al Wav e - Op tic al b ud g e t (d B) · Optional Second optic module for redundancy
Le d / Co nn.
Ty p e d is tanc e Fib e r ty p e le ng th Mechanical data
Las e r ty p e
(k m) (nm) · Desktop versions H x W x D: 50 x 200 x 350 mm
m in ty p weight: 1.4 kg
SC13 MM-SH 2 Le d Multimo d e 1300 SC 11 17 · Rack-mount versions H x W x D: 235 x 20 x 300 mm
ST13 MM-SH 2 Le d Multimo d e 1300 ST 11 17 weight: 1 kg
SC13 SM-MH 50 Las e r Sing le mo d e 1300 SC 16 25 · Cardnest CN4 H x W x D: 6U x 19 x 350 mm
ST13 SM-MH 50 Las e r Sing le mo d e 1300 ST 16 25 weight: 6.1 kg
SC13 SM-LH 70 Las e r Sing le mo d e 1300 SC 29 33 Environmental requirements
ST13 SM-LH 70 Las e r Sing le mo d e 1300 ST 29 33 · Ambient operational temperature 0°C to 50°
· Storage temperature -25°C to +70°C
· Maximum altitude 3000 m
User speeds
· Relative humidity 0% to 95% non-condensing
Inte rnal c lo c k ing Slav e / Re c e iv e c lo c k ing Ex te rnal c lo c k ing Power requirements
Nx 64 k b p s (up to 2 Mb p s ) Nx 64 k b p s (up to 2 Mb p s ) · Desktop versions 230Vac +/-10% 50-60 Hz : 60 mA
Nx 32 k b p s (up to 10 Mb p s )
Nx 2 Mb p s (up to 10 Mb p s ) Nx 2 Mb p s (up to 10 Mb p s ) 115Vac +/-10% 50-60Hz :120 mA
34 Mb p s
34 Mb p s 34 Mb p s 48Vdc (36Vdc - 72Vdc) : 160 mA
45 Mb p s
45 Mb p s 45 Mb p s · Rack-mount versions 48Vdc (36Vdc - 72Vdc) : 180 mA
Available application interfaces
Ty p e Co nne c to r Max imum s up p o rte d s p e e d
V. 35 ISO 2593 (fe male 1. 6 mm p in) 10 Mb p s
V. 36/ RS-449 ISO 4902 (fe male DB37) 10 Mb p s
X. 21 ISO 4903 (fe male DB15) 10 Mb p s
RS-530/ RS-530A ISO 2110 (fe male DB25) 10 Mb p s
V. 24/ RS-232 ISO 2110 (fe male DB25) 128 k b p s
G. 703 E1 BNC (75 o hm) + RJ 45 (120 o hm) 2 Mb p s (E1 o r FE1) fix e d
Quad G. 703 E1 4 x RJ 45 (120 o hm) 4 x 2 Mb p s (E1) fix e d Desktop version (G.703 E1 interface mounted)
Ethe rne t Brid g e IEEE 802. 3 (10 Bas e -T RJ 45) 10 Mb p s
Ethe rne t IP Ro ute r IEEE 802. 3 (10 Bas e -T RJ 45) 2 Mb p s CLASS 1 LASER PRODUCT Laser radiation: avoid exposure to the beam
G. 703 E3 Co ax (75 o hm) 34 Mb p s fix e d To avoid possible eye damage, do not view into an uncovered optical module
G. 703 T3 Co ax (75 o hm) 45 Mb p s fix e d when the equipment is operational
HSSI HSSI 45 Mb p s
Note: Telindus may make improvements and/or changes in the products described above at any time, without notice and shall in no way be held responsible for errors in this document.
Your Distributor
Geldenaaksebaan 335 B-3001 Heverlee · Belgium
Tel +32/16-38.20.11 · Fax +32/16-40.01.02
website http : //www.telindus.com
xxxxxx V1
