Datasheet

S7700 Series Smart Routing Switches

The S7700 series switches are high-end smart routing switches designed for next-generation
enterprise networks. The S7700 series can function either as an aggregation or core node on
a campus network or in a data center to provide integrated wireless access.

Introduction
The S7700 series switches (S7700 for short) are high-end smart routing switches designed for next-generation enterprise
networks. The S7700 design is based on Huawei's intelligent multi-layer switching technology to provide intelligent service
optimization methods, such as MPLS VPN, traffic analysis, comprehensive H-QoS policies, controllable multicast, load
balancing, and security, in addition to high-performance Layer 2 to Layer 4 switching services. The S7700 also features super
scalability and reliability.

The S7700 can function either as an aggregation or core node on a campus network or in a data center to provide integrated
wireless access. The S7700 also offers voice, video, and data services, helping enterprises build an integrated cost-effective
end-to-end network.

Product Overview
Models and Appearance
The S7700 series is available in three models: S7703/S7703-PoE, S7706/S7706-PoE, and S7712. The switching capacity and
port density of all three models are expandable. The S7700 is based on a new hardware platform, which adopts a left-to-rear
ventilation channel to achieve better energy efficiency. Key components work in redundancy mode to minimize risks of system
breakdown and service interruption. Using innovative energy-saving chips, the S7700 provides an industry-leading solution for a
sustainable energy-saving network.

The power supply slots on the S7703, S7706, and S7712 consist of the system power supply slot and PoE power supply slot,
which are independent of each other. By installing the appropriate power modules into the PoE power supply slots, the S7703,
S7706, and S7712 can provide PoE capabilities.
The S7703-PoE/S7706-PoE differ from the S7703/S7706, because all power supply slots on the S7703-PoE/S7706-PoE are
shared by the system power supply and PoE power supply.

Models and appearances of the S7700 series

Appearance Description
 Number of Main Control Unit (MCU) slots: 2
 Number of Line Processing Unit (LPU) slots: 3
 Number of Centralized Monitoring Unit (CMU) slots: The CMU card's
function is integrated into S7703's MCU.
 Number of fan slots: 1
 Number of power module slots:
− S7703: 2 for system and 1 for PoE

S7700 Series Smart Routing Switches 1

 Appearance Description
S7703/S7703-PoE − S7703-PoE: 3, shared by both the system and PoE power
supplies
 Port density per chassis: 144 x FE, 144 x GE, 144 x 10GE, 24 x
40GE, 12 x 100GE
 Installation: The switch can be installed in an N66E or N68E cabinet,
one cabinet for one chassis.
 Forwarding performance: 144 Mpps
 Switching capacity: 1.92 Tbps
 Number of SRU slots: 2
 Number of LPU slots: 6
 Number of CMU slots: 2
 Number of fan slots: 2
 Number of power module slots:
− S7706: 4 for system and 4 for PoE
− S7706-PoE: 8, shared by both the system and PoE power
supplies
 Port density per chassis: 288 x FE, 288 x GE, 288 x 10GE, 48 x
40GE, 24 x 100GE
 Installation: The switch can be installed in an N66E or N68E cabinet,
one cabinet for one chassis.
 Forwarding performance: 2880 Mpps
 Switching capacity: 3.84 Tbps
S7706/S7706-PoE
 Number of SRU slots: 2
 Number of LPU slots: 12
 Number of CMU slots: 2
 Number of fan slots: 4
 Number of power module slots: 4 for system and 4 for PoE
 Port density per chassis: 576 x FE, 576 x GE, 576 x 10GE, 96 x
40GE, 48 x 100GE
 Installation: The switch can be installed in an N66E or N68E cabinet,
one cabinet for one chassis.
 Forwarding performance: 2880 Mpps
 Switching capacity: 3.84 Tbps

S7712

Cards
S7700 series switches come with a variety of cards, including SRUs/MCUs, related subcards, LPUs, and CMUs.

The following describe the different types of LPUs:

 The S series includes SA and SC interface cards, for example, 24-port 100M/1000M BASE-X interface card (SA, SFP)-
32K MAC.
 The E series includes EA, EC, ED, and EE interface cards, for example, 48-port 100M BASE-X interface card (EA, SFP)-
32K MAC.

S7700 Series Smart Routing Switches 2

 The F series includes FA and FC interface cards, for example, 48-port 1000M BASE-T interface card (FA, RJ45)-32K MAC.
 The B series has BC interface cards, for example, 48-port 100M/1000M BASE-X interface card (BC, SFP)-128K MAC.
 The X series includes X1E, X2S, X2E, X5L, X5E, X5S and X5H interface cards, for example, 48-port 10/100/1000BASE-T
interface card (X1E, RJ45).

The following table lists the cards supported by the S7700.

Cards supported by the S7700

Card Type Card Name Card Description Card Series

Main control unit ES0D00SRUA00 S7706/S7712 Main Control Unit A -
ES1D2SRUE000 S7706/S7712 Main Control Unit E -
ES1D2SRUH000 S7706/S7712 Main Control Unit H -
ES1D2SRUH002 S7706/S7712 Main Control Unit H (Support Secure Boot) -
ES0D00MCUA00 S7703 Main Control Unit A -
Subcard on the main ES0D00FSUA00 Enhanced Flexible Service Unit -
control unit LE0D00CKMA00 Clock Pinch Board,-1588 -
ES02VSTSA Cluster Switching System Service Unit -
ES1D2VS04000 4-Port 10G Cluster Switching System Service Unit (SFP+) -
Centralized monitoring EH1D200CMU00 Centralized Monitoring Unit -
unit
1000M interface card ES0D0G24SA00 24-Port 100/1000BASE-X Interface Card (SA, SFP) SA
ES0D0G24SC00 24-Port 100/1000BASE-X Interface Card (EC, SFP) EC
ES0D0G24CA00 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T SA
Combo Interface Card (SA, SFP/RJ45)
ES1D2G24SX5E 24-Port 100/1000BASE-X Interface Card (X5E, SFP) X5E
ES1D2G24SX5L 24-Port 100/1000BASE-X Interface Card (X5L, SFP) X5L
ES0DG48CEAT0 36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X EA
Interface Card (EA, RJ45/SFP)
ES0D0G48VA00 48-Port 10/100/1000BASE-T PoE Interface Card (EA, EA
RJ45, PoE)
ES1D2G48VX5S 48-port 100/1000BASE-T PoE interface card (X5S, RJ45, X5S
PoE++)
ES1D2G48VX5E 48-port 100/1000BASE-T PoE interface card (X5E, RJ45, X5E
PoE++)
ES0DG24TFA00 24-Port 10/100/1000BASE-T Interface Card (FA, RJ45) FA
ES0D0G48TA00 48-Port 10/100/1000BASE-T Interface Card (EA, RJ45) EA
ES0D0G48TC00 48-Port 10/100/1000BASE-T Interface Card (EC, RJ45) EC
ES0DG48TFA00 48-Port 10/100/1000BASE-T Interface Card (FA, RJ45) FA
ES1D2G48TX1E 48-Port 10/100/1000BASE-T Interface Card (X1E, RJ45) X1E
ES1D2G48TX5E 48-port 100/1000BASE-T interface card (X5E, RJ45) X5E
ES1D2G48TX5H 48-port 100/1000BASE-T interface card (X5H, RJ45) X5H
ES1D2G48TX5L 48-port 100/1000BASE-T interface card (X5L, RJ45) X5L
ES1D2G48TX5S 48-port 100/1000BASE-T interface card (X5S, RJ45) X5S
ES0D0G48SA00 48-Port 100/1000BASE-X Interface Card (EA, SFP) EA
ES0D0G48SC00 48-Port 100/1000BASE-X Interface Card (EC, SFP) EC
ES1D2G48SFA0 48-Port 100/1000BASE-X Interface Card (FA, SFP) FA
ES1D2G48SX1E 48-Port 100/1000BASE-X Interface Card (X1E, SFP) X1E

S7700 Series Smart Routing Switches 3

 Card Type Card Name Card Description Card Series
ES1D2G48SX5E 48-Port 100/1000BASE-X Interface Card (X5E, SFP) X5E
ES1D2G48SX5H 48-Port 100/1000BASE-X Interface Card (X5H, SFP) X5H
ES1D2G48SX5L 48-Port 100/1000BASE-X Interface Card (X5L, SFP) X5L
ES1D2G48SX5S 48-Port 100/1000BASE-X Interface Card (X5S, SFP) X5S
GE/10GE interface ES0D0T24XA00 24-Port 10/100/1000BASE-T and 2-Port 10GBASE-X EA
card Interface Card (EA, RJ45/XFP)
ES0D0S24XA00 24-Port 100/1000BASE-X and 2-Port 10GBASE-X Interface EA
Card (EA, SFP/XFP)
ES1D2S04SX1E 4-Port 10GBASE-X and 24-Port 100/1000BASE-X and 8- X1E
Port 10/100/1000BASE-T Combo Interface Card (X1E,
RJ45/SFP/SFP+)
ES1D2S04SX5E 4-port 10GE SFP+ and 44-port GE SFP interface card X5E
(X5E, SFP+)
ES1D2S08SX1E 8-Port 10GBASE-X and 8-Port 100/1000BASE-X and 8- X1E
Port 10/100/1000BASE-T Combo Interface Card (X1E,
RJ45/SFP/SFP+)
ES1D2S24SX2E 24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface X2E
Card (X2E, SFP+)
ES1D2S24SX2S 24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface X2S
Card (X2S, SFP+)
ES1D2S16SX2E 16-Port 10GE SFP+ Interface and 16-Port GE SFP X2E
Interface Card (X2E, SFP+)
ES1D2S16SX2S 16-Port 10GE SFP+ Interface and 16-Port GE SFP X2S
Interface Card (X2S, SFP+)
10GE interface card ES1D2X08SX5E 8-Port 10GBASE-X Interface Card (X5E, SFP+) X5E
ES1D2X08SX5H 8-Port 10GBASE-X Interface Card (X5H, SFP+) X5H
ES1D2X08SX5L 8-Port 10GBASE-X Interface Card (X5L, SFP+) X5L
ES0D0X12SA00 12-Port 10GBASE-X Interface Card (SA, SFP+) SA
ES1D2X16SSC2 16-Port 10GBASE-X Interface Card (SC, SFP+) SC
ES1D2X32SSC0 32-Port 10GBASE-X Interface Card (SC, SFP+) SC
ES1D2X32SX2E 32-Port 10GBASE-X Interface Card (X2E, SFP+) X2E
ES1D2X32SX2S 32-Port 10GBASE-X Interface Card (X2S, SFP+) X2S
ES1D2X48SX2S 48-Port 10GBASE-X Interface Card (X2S, SFP+) X2S
40GE interface card ES1D2L02QFC0 2-Port 40GBASE-X Interface Card (FC, QSFP+) FC
ES1D2L08QX2E 8-Port 40GBASE-X Interface Card (X2E, QSFP+) X2E
40GE/100GE interface ES1D2H02QX2S 2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ X2S
card Interface Card (X2S, QSFP28)
ES1D2H02QX2E 2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ X2E
Interface Card (X2E, QSFP28)
100GE interface card ES1D2C02FEE0 2-Port 100GBASE-X Interface Card (EE, CFP) EE
ES1D2C04HX2E 4-Port 100GE QSFP28 Interface Card (X2E, QSFP28) X2E
ES1D2C04HX2S 4-Port 100GE QSFP28 Interface Card (X2S, QSFP28) X2S
ACU2 module ACU2 WLAN ACU2 Access Controller Unit (128 AP Control -
Resource Included)
NOTE
For details, see the ACU2 Wireless Access Controller
Unit.

S7700 Series Smart Routing Switches 4

 Card Type Card Name Card Description Card Series
Firewall module ET1D2FW00S00 NGFW Module A, with HW General Security Platform -
Software
NOTE
For details, see the NGFW Module Hardware Guide.
ET1D2FW00S01 NGFW Module B with HW General Security Platform -
Software
NOTE
For details, see the NGFW Module Hardware Guide.
ET1D2FW00S02 NGFW Module C, with HW General Security Platform -
Software
NOTE
For details, see the NGFW Module Hardware Guide.
IPS module ET1D2IPS0S00 IPS module A, with HW general security platform software -
NOTE
For details, see the IPS Module Hardware Guide.

To learn detailed specifications of S7700 switch cards, see the S7700 Series Switches Cards Datasheet.

Fan Module
The following table lists the fan module applicable to the S7700.

Technical specifications of the fan module applicable to the S7700 series

Fan Module Technical Specifications Applied Switch Model

 Dimensions (W x D x H): 323.9 mm x 74.8 mm x 126.6 mm  S7703/S7703-PoE
(12.8 in. x 2.9 in. x 5.0 in.)  S7706/S7706-PoE
 Number of fans: 2  S7712
 Weight: 1140±20 g
 Maximum power consumption: 43 W
ES0E2FBX
 Maximum wind pressure: 331 Pa
 Maximum wind rate: 163 cubic feet per minute (CFM)
 Maximum noise: 62 dBA
 Operating voltage range: -38.4 V DC to -72 V DC
 Maximum wind rate: 28 cubic feet per minute (CFM)
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

The following table lists the functions of the fan module applicable to the S7700.

Functions of fan modules

Function Description

Hot swapping Supported

Other fan modules are not affected when you install or remove a fan module.

S7700 Series Smart Routing Switches 5

 Function Description

Intelligent fan speed The S7700 series switches provide intelligent fan speed adjustment based on temperature in
adjustment each zone. The system monitors the temperature of key components, and adjusts the fan speed
based on temperature changes. This intelligent fan speed adjustment function ensures that the
system stays within the proper operating temperature range, and reduces power consumption
and noise.

Power Supply
The S7706 and S7712 provide slots PWR1 to PWR4 for system power modules, and slots PWR5 to PWR8 for PoE power
modules. The S7703 provides slots PWR1 to PWR2 for power modules, and slots PWR3 for PoE power module.

AC and DC power modules cannot be used in the same chassis.

The S7700 series switches support two redundancy modes of power modules: 2:2, 1:1. Ensure that the total maximum output
power is larger than the maximum power actually required by the system. For example, the maximum power required by the
system is 4000 W. If two 2200 W power modules are installed in the chassis, they work in no redundancy mode. If four 2200 W
power modules are installed, they work in 2:2 redundancy model.

The following table lists the power supplies applicable to the S7700.

Technical specifications of the power supplies applicable to the S7700 series

Power Module Technical Specifications Applied Switch Model

 Dimensions (W x D x H): 41 mm x 393 mm x 130 mm (1.6 in. x  S7703
15.5 in. x 5.1 in.)  S7706
 Weight: <2.5 kg  S7712
 Input:
− Rated input voltage range: -48 V DC/-60 V DC
− Maximum input voltage range: -38.4 V DC to -72 V DC
− Maximum input current: 40 A
ES02PSD16
 Output:
− Rated output voltage range: -48 V DC/-60 V DC
− Maximum output voltage range: -38.4 V DC to -72 V DC
− Maximum output current: 40 A
− Maximum output power: 1600 W
 Hot swap: Supported
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

 Dimensions (W x D x H): 41 mm x 393 mm x 130 mm (1.6 in. x  S7703/S7703-PoE

15.5 in. x 5.1 in.)  S7706/S7706-PoE
 Weight: <2.5 kg  S7712
 Input:
− Rated input voltage range: -48 V DC/-60 V DC
− Maximum input voltage range: -40 V DC to -72 V DC

W2PSD2200 − Maximum input current: 60 A

S7700 Series Smart Routing Switches 6

 Power Module Technical Specifications Applied Switch Model
 Output:
− Rated output voltage range: -53.5 V DC
− Maximum output voltage range: -42 V DC to -58 V DC
− Maximum output current: 42 A
− Maximum output power: 2200 W
 Hot swap: Supported
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

 Dimensions (W x D x H): 41 mm x 393 mm x 130 mm (1.6 in. x  S7703/S7703-PoE

15.5 in. x 5.1 in.)  S7706/S7706-PoE
 Weight: <2.5 kg  S7712
 Input:
− Rated input voltage: 220 V AC/110 V AC; 50/60 Hz
− Rated input voltage range: 200 V AC to 240 V AC (220 V AC
input)/100 V AC to 120 V AC (110 V AC input); 47 Hz to 63
W2PSA0800 Hz
− Maximum input voltage range: 90 V AC to 290 V AC; 47 Hz
to 63 Hz (When the input voltage is in the range of 90 V AC
to 175 V AC, the power module provides up to half of the
maximum output power.)
− Maximum input current: 5 A
 Output:
− Maximum output current: 15 A (220 V AC input)/7.5 A (110 V
AC input)
− Maximum output power: 800 W (220 V AC input)/400 W
(110 V AC input)
 Hot swap: Supported
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

 Dimensions (W x D x H): 41 mm x 393 mm x 130 mm (1.6 in. x  S7703/S7703-PoE

15.5 in. x 5.1 in.)  S7706/S7706-PoE
 Weight: <2.5 kg  S7712
 Input:
− Rated input voltage: 220 V AC/110 V AC; 50/60 Hz
− Rated input voltage range: 200 V AC to 240 V AC (220 V AC
input)/100 V AC to 120 V AC (110 V AC input); 47 Hz to 63
PAC-2200WF Hz
− Maximum input voltage range: 90 V AC to 290 V AC; 47 Hz

S7700 Series Smart Routing Switches 7

 Power Module Technical Specifications Applied Switch Model
to 63 Hz (The maximum output power reduces by a half
when the input voltage is in the range of 90 V AC to 175 V
AC.)
− Maximum input current: 15.5 A
 Output:
− Maximum output current: 42 A (220 V AC input)/21 A (110 V
AC Input)
− Maximum output power: 2200 W (220 V AC input)/1100 W
(110 V AC input)
 Hot swap: Supported
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

 Dimensions (W x D x H): 41 mm x 417.4 mm x 130 mm (0.2 in.  S7703/S7703-PoE

x 16.4 in. x 5.1 in.)  S7706/S7706-PoE
 Weight: <3.0 kg  S7712
 AC input:
− Rated input voltage: 220 V AC/110 V AC; 50/60 Hz
− Rated input voltage range: 200 V AC to 240 V AC (220 V AC
PAC3KS54-CB input)/100 V AC to 130 V AC (110 V AC input); 47 Hz to 63
Hz
− Maximum input voltage range: 90 V AC to 290 V AC; 47 Hz
to 63 Hz (The maximum output power reduces by a half
when the input voltage is in the range of 90 V AC to 175 V
AC.)
− Maximum input current: 16 A
 High-voltage DC input:
− Rated input voltage: 240 V DC
− Rated output voltage range: -38.4 V DC to -72 V DC
− Maximum output current: 40 A
− Maximum output power: 1600 W
 Hot swap: Supported
 Environment specifications:
− Operating temperature: 0°C to 45°C (32°F to 113°F)
− Operating relative humidity: 5% RH to 95% RH
(noncondensing)
− Storage temperature: -40°C to +70°C (-40°F to +158°F)
− Storage relative humidity: 5% RH to 95% RH
(noncondensing)

S7700 Series Smart Routing Switches 8

Product Features and Highlights
Agile Switch, Enabling Networks to Be More Agile for Services
 The S7700's flexible packet processing and traffic control capabilities can meet current and future service requirements,
helping build a highly scalable network.
 The built-in native AC on S7700 series switches allows enterprises to build a wireless network without additional AC
hardware. S7700 switch can manage up to 4K APs. It is a core switch that provides up to Tbit/s AC capabilities, avoiding the
performance bottleneck on independent AC devices. The native AC capabilities help organizations better cope with challenges
in the high-speed wireless era.
 The S7700 series' unified user management function authenticates both wired and wireless users, ensuring a consistent
user experience no matter whether they are connected to the network through wired or wireless access devices. The unified
user management function supports various authentication methods, including PPPoE, 802.1x, MAC address, and Portal
authentication, and is capable of managing users based on user groups, domains, and time ranges. These functions implement
user and service management and enable the transformation from device-centric management to user-centric management.
 Huawei's Super Virtual Fabric 2.0 (SVF 2.0) technology can not only virtualize fixed-configuration switches into S7700
switch line cards but also virtualize APs as switch ports. With this virtualization technology, a physical network with
core/aggregation switches, access switches, and APs can be virtualized into a "super switch", offering the simplest network
management solution.
 Huawei's Packet Conservation Algorithm for Internet (iPCA) technology changes the traditional method that uses simulated
traffic for fault location. iPCA technology monitors network quality for any service flow at any network node, at any time, and
without extra costs. It can detect temporary service interruptions within one second and can identify faulty ports accurately. This
cutting-edge fault detection technology turns "extensive management" into "fine granular management."
 Huawei's IEEE 1588v2 and Synchronous Ethernet (SyncE) solutions enable high-precision time synchronization between
network devices. Compared with the Global Positioning System (GPS) time synchronization solution, Huawei's solutions
enhance security while reducing costs.
 The Service Chain feature virtualizes the value-added service processing capabilities, such as firewall, so that campus
networks can utilize these capabilities in an undifferentiated manner. That is, these capabilities can be used without location
constraint.

Powerful Service Processing Capabilities

 The S7700 provides high-density 10GE ports and 100GE ports. Each S7712 chassis can provide a maximum of 576 x
10GE ports, 96 x 40GE ports or 48 x 100GE ports, meeting the requirements of bandwidth-consuming applications, such as
multimedia conferencing and data access.
 The S7700's multi-service routing and switching platform meets requirements for service bearing at the access layer,
aggregation layer, and core layer of enterprise networks. The S7700 provides wireless access along with voice, video, and data
services, helping enterprises build integrated full-service networks with high availability and low latency.
 The S7700 supports distributed Layer 2/Layer 3 MPLS VPN functions, including MPLS, VPLS, HVPLS, and VLL,
implementing VPN access for enterprise users.
 The S7700 supports various Layer 2 and Layer 3 multicast protocols such as PIM SM, PIM DM, PIM SSM, MLD, and
IGMP snooping. It can provide enterprises with multi-terminal high definition video surveillance and video conferencing services.

Carrier-class Reliability and Visual Fault Diagnosis

 Huawei's high reliability design ensures that the S7700 is 99.999% reliable. The S7700 provides redundant backup for key
components, including main control units (MCUs), power supply units, and fans trays, all of which are hot swappable.
 The S7700 innovatively implements the Cluster Switch System (CSS) function through switch fabrics, and packets are only
switched once when they are forwarded between chassis. This addresses the problem of low switching efficiency caused by
multiple switching processes during inter-chassis forwarding in clusters established using line cards. In addition, inter-chassis
link aggregation can be used to improve link use efficiency and prevent single-point failures.
 The S7700 can use service ports as cluster ports, enabling flexible port utilization.
 The S7700 supports High-speed Self Recovery (HSR) technology. Using Huawei's X series cards, the S7700 is the
industry's only switch that implements end-to-end IP MPLS bearer network protection switchover within 50 ms, improving
network reliability.
 The S7700 has a dedicated fault detection subcard that provides hardware-based BFD and hardware-based OAM
including IEEE 802.3ah, 802.1ag, and ITU-Y.1731. Hardware-based OAM implements 3.3 ms fault detection and can check

S7700 Series Smart Routing Switches 9

session connectivity of all terminals in real time when a network fault occurs. The S7700 can also work with a network
management system (NMS). The NMS provides a graphical fault diagnosis interface and traverses all network elements and
links automatically to help users detect and locate faults quickly.

Enhanced QoS Mechanism, Improving the Voice and Video Experience

 The S7700's HQoS control mechanisms classify traffic based on information from the link layer to the application layer.
With advanced queue scheduling and congestion control algorithms, the S7700 performs accurate multi-level scheduling for
data flows, satisfying enterprises' QoS requirements for a variety of services and user terminals.
 The S7700 supports hardware-based low delay queues for multicast packets so that the video service can be processed
with high priority and low delay. This feature guarantees the high quality of key services in an enterprise, such as video
conference and surveillance.
 The S7700 uses innovative priority scheduling algorithms to optimize the QoS queue scheduling mechanism for voice and
video services. Each port supports eight priority queues. The improved scheduling mechanism shortens the delay of the VoIP
service and eliminates the pixelation effect in the video service, improving user experience.

High-performance IPv6 Service Processing, Resulting in A Smooth Transition from IPv4

to IPv6
 Both the hardware platform and software platform of the S7700 support IPv6. The S7700 has earned the IPv6 Ready
Phase 2 (Gold) designation.
 The S7700 supports IPv4/IPv6 dual stack, various tunneling technologies, IPv6 static routing, RIPng, OSPFv3, BGP+, IS-
ISv6, and IPv6 multicast. These features meet the demand for IPv6 networking and combined IPv4 and IPv6 networking.

Superb Traffic Analysis Capability, Resulting in Real-time Network Performance

Monitoring
 The S7700 supports NetStream for the real-time collection and analysis of network traffic statistics.
 The S7700 supports the V5, V8, and V9 NetStream formats and provides aggregation traffic templates to reduce the
burden on the network collector system. In addition, the S7700 supports real-time traffic collection, dynamic report generation,
traffic attribute analysis, and traffic exception trap.
 NetStream monitors network traffic in real time and analyzes the device's throughput, providing data for network structure
optimization and capacity expansion.

Comprehensive Security Mechanisms, Protecting Enterprises From Internal and External

Security Threats
 The S7700 supports MAC security (MACSec) that enables hop-by-hop secure data transmission. The S7700 can be
applied to scenarios that pose high requirements on data confidentiality, such as government and finance sectors.
 NGFW is a next-generation firewall card that can be installed on an S7700. In addition to the traditional defense functions
such as firewall, identity authentication, and Anti-DDoS, the NGFW supports IPS, anti-spam, web security, and application
control functions.
 The S7700 provides comprehensive NAC solutions for enterprise networks. It supports MAC address authentication, Portal
authentication, 802.1x authentication, and DHCP snooping-triggered authentication. These authentication methods ensure the
security of various access modes, such as dumb terminal access, mobile access, and centralized IP address allocation.

Innovative Energy-saving Chips, Allowing for Intelligent Power Consumption Control

 The S7700 uses innovative energy-saving chips, which can dynamically adjust power on all ports based on traffic volume.
An idle port enters a sleep mode to reduce power consumption.
 The S7700 supports Power over Ethernet (PoE) and uses different energy management modes according to the powered
device (PD) type, ensuring flexible energy management.
 The S7700 supports IEEE 802.3az Energy Efficient Ethernet and provides the low power idle mode for the PHY line card.
If the link utilization is low, the S7700 switches to a lower speed or power PHY to reduce power consumption.

VXLAN
 VXLAN is used to construct a Unified Virtual Fabric (UVF). As such, multiple service networks or tenant networks can be
deployed on the same physical network, and service and tenant networks are isolated from each other. This capability truly
achieves 'one network for multiple purposes'. The resulting benefits include enabling data transmission of different services or

S7700 Series Smart Routing Switches 10

customers, reducing the network construction costs, and improving network resource utilization. The S7700 series switches are
VXLAN-capable and allow centralized and distributed VXLAN gateway deployment modes. These switches also support the
BGP EVPN protocol for dynamically establishing VXLAN tunnels and can be configured using NETCONF/YANG.

OPS
 Open Programmability System (OPS) is an open programmable system based on the Python language. IT administrators
can program the O&M functions of a switch through Python scripts to quickly innovate functions and implement intelligent O&M.

Big Data Security Collaboration

 Agile switches use NetStream to collect campus network data and then report such data to the Huawei Cybersecurity
Intelligence System (CIS). The purposes of doing so are to detect network security threats, display the security posture across
the entire network, and enable automated or manual response to security threats. The CIS delivers the security policies to the
Agile Controller. The Agile Controller then delivers such policies to agile switches that will handle security events accordingly. All
these ensure campus network security.

Intelligent Diagnosis
 Open Intelligent Diagnosis System (OIDS) integrates the device health monitoring and fault diagnosis functions – that
are typically deployed on a Network Management System (NMS) – into the switch software to implement intelligent diagnosis
on a single switch. After OIDS is deployed on a switch, the switch periodically collects and records the running information and
automatically determines whether a fault occurs. If a fault occurs, the switch automatically locates the fault or helps locate the
fault. All these merits increase fault locating efficiency of O&M staff while improving device maintainability.

Product Specifications
Functions and Features
The following table lists the functions and features available on the S7700.

Unless otherwise specified, the S7703 mentioned below includes both S7703 and S7703-PoE models, and the S7706 includes
both S7706 and S7706-PoE models.

Function and feature metrics for the S7700 series

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+

MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
System basics OS basics File upload and download Yes Yes Yes Yes Yes
File system Yes Yes Yes Yes Yes
Directory and file Yes Yes Yes Yes Yes
management
SVF SVF support Yes Yes Yes Yes Yes
Clustering Service port-based No Yes Yes Yes Yes
clustering
CSS card-based clustering No Yes Yes Yes Yes
Interface basics Jumbo frames Yes Yes Yes Yes Yes
Port bridge Yes Yes Yes Yes Yes
Load balancing among Yes Yes Yes Yes Yes
links of a trunk
Full-duplex, half-duplex, Yes Yes Yes Yes Yes
and auto-negotiation
Flow control on an Yes Yes Yes Yes Yes
interface

S7700 Series Smart Routing Switches 11

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
Rate auto-negotiation on Yes Yes Yes Yes Yes
an interface
Link aggregation Yes Yes Yes Yes Yes
Configuration SSH v1.5 Yes Yes Yes Yes Yes
management
SSH v2.0 Yes Yes Yes Yes Yes
Console terminal services Yes Yes Yes Yes Yes
SNMPv1 Yes Yes Yes Yes Yes
SNMPv2c Yes Yes Yes Yes Yes
SNMPv3 Yes Yes Yes Yes Yes
NETCONF/YANG Yes Yes Yes Yes Yes
Data communication Yes Yes Yes Yes Yes
between terminal users
Telnet/SSH terminal Yes Yes Yes Yes Yes
services
Hierarchical user rights Yes Yes Yes Yes Yes
management and
commands
Alarm information output Yes Yes Yes Yes Yes
Command line interface Yes Yes Yes Yes Yes
(CLI)-based configuration
SNMP-based NMS for Yes Yes Yes Yes Yes
unified configuration
Log information output Yes Yes Yes Yes Yes
Messages and help Yes Yes Yes Yes Yes
information in English
Debugging information Yes Yes Yes Yes Yes
output
Upgrade and Version upgrade Yes Yes Yes Yes Yes
rollback
Version rollback Yes Yes Yes Yes Yes
Hardware Hardware monitoring Yes Yes Yes Yes Yes
management
Energy saving Yes Yes Yes Yes Yes
Ethernet basics MAC Automatic learning of MAC Yes Yes Yes Yes Yes
management addresses
Automatic aging of MAC Yes Yes Yes Yes Yes
addresses
Static, dynamic, and Yes Yes Yes Yes Yes
blackhole MAC address
entries
VLAN VLAN specification 4094 4094 4094 4094 4094
management
Access mode Yes Yes Yes Yes Yes
Trunk mode Yes Yes Yes Yes Yes
Hybrid mode Yes Yes Yes Yes Yes
QinQ mode Yes Yes Yes Yes Yes
Default VLAN Yes Yes Yes Yes Yes
MUX VLAN Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 12

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
Super-VLAN Yes Yes Yes Yes Yes
Voice VLAN Yes Yes Yes Yes Yes
VLAN assignment based Yes Yes Yes Yes Yes
on IP subnets
VLAN assignment based Yes Yes Yes Yes Yes
on MAC addresses
VLAN assignment based Yes Yes Yes Yes Yes
on MAC address + IP
address
VLAN assignment based Yes Yes Yes Yes Yes
on MAC address + IP
address + interface
number
VLAN assignment based Yes Yes Yes Yes Yes
on protocols
VLAN assignment based Yes Yes Yes Yes Yes
on interfaces
GVRP GARP Yes Yes Yes Yes Yes
GVRP Yes Yes Yes Yes Yes
Ring network BPDU protection Yes Yes Yes Yes Yes
protocol
DLDP Yes Yes Yes Yes Yes
ERPS semi-ring topology Yes Yes Yes Yes Yes
ERPS closed-ring topology Yes Yes Yes Yes Yes
G.8032 v1 Yes Yes Yes Yes Yes
G.8032 v2 Yes Yes Yes Yes Yes
MSTP Yes Yes Yes Yes Yes
Monitor Link Yes Yes Yes Yes Yes
RRPP Yes Yes Yes Yes Yes
Single RRPP ring Yes Yes Yes Yes Yes
Hybrid networking of RRPP Yes Yes Yes Yes Yes
rings and other rings
Intersecting RRPP ring Yes Yes Yes Yes Yes
Tangent RRPP ring Yes Yes Yes Yes Yes
RSTP Yes Yes Yes Yes Yes
Smart Ethernet Protection Yes Yes Yes Yes Yes
(SEP)
STP Yes Yes Yes Yes Yes
Smart Link Yes Yes Yes Yes Yes
Smart Link multi-instance Yes Yes Yes Yes Yes
load balancing
Root protection Yes Yes Yes Yes Yes
Loop protection Yes Yes Yes Yes Yes
Loop detection on an Yes Yes Yes Yes Yes
interface
Defense against TC BPDU Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 13

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
attacks
LAN tunneling VLAN mapping Yes Yes Yes Yes Yes
Transparent transmission Yes Yes Yes Yes Yes
of Layer 2 protocol packets
Adding double VLAN tags Yes Yes Yes Yes Yes
to packets based on
interfaces
Selective QinQ Yes Yes Yes Yes Yes
LAN security MAC address flapping Yes Yes Yes Yes Yes
detection
Sticky MAC Yes Yes Yes Yes Yes
Broadcast traffic Yes Yes Yes Yes Yes
suppression in a VLAN
Unknown unicast traffic Yes Yes Yes Yes Yes
suppression in a VLAN
Multicast traffic Yes Yes Yes Yes Yes
suppression in a VLAN
Storm control on Yes Yes Yes Yes Yes
broadcast, multicast, and
unknown unicast traffic
Limiting the number of Yes Yes Yes Yes Yes
MAC addresses that an
interface can learn
Interface security Yes Yes Yes Yes Yes
Broadcast traffic Yes Yes Yes Yes Yes
suppression on an
interface
Unknown unicast traffic Yes Yes Yes Yes Yes
suppression on an
interface
Multicast traffic Yes Yes Yes Yes Yes
suppression on an
interface
Interface isolation Yes Yes Yes Yes Yes
Configuring MAC address Yes Yes Yes Yes Yes
learning priorities for
interfaces
Ethernet OAM 802.1ag MAC ping (LB) Yes Yes Yes Yes Yes
802.1ag MAC trace (LT) Yes Yes Yes Yes Yes
Association between Yes Yes Yes Yes Yes
802.1ag and 802.3ah
Dying gasp Yes Yes Yes Yes Yes
Y.1731 unidirectional delay Yes Yes Yes Yes Yes
and jitter measurement
(one-way ETH-DM)
Y.1731 bidirectional delay Yes Yes Yes Yes Yes
and jitter measurement
(two-way ETH-DM)

S7700 Series Smart Routing Switches 14

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
802.3ah-based automated Yes Yes Yes Yes Yes
discovery
Remote loopback Yes Yes Yes Yes Yes
Link fault disposal Yes Yes Yes Yes Yes
Link fault detection Yes Yes Yes Yes Yes
Network - NTP Yes Yes Yes Yes Yes
synchronization
Ethernet clock Yes Yes Yes Yes Yes
synchronization
1588v2 Yes Yes Yes Yes Yes
Network EasyOperation EasyDeploy (client) Yes Yes Yes Yes Yes
management
EasyDeploy (commander) Yes Yes Yes Yes Yes
and monitoring
LLDP LLDP Yes Yes Yes Yes Yes
LLDP-MED extended TLV Yes Yes Yes Yes Yes
RMON RMON Yes Yes Yes Yes Yes
RMON2 Yes Yes Yes Yes Yes
HTTP HTTP1.1 Yes Yes No Yes No
HTTPS Yes Yes No Yes No
Mirroring ERSPAN Yes Yes Yes Yes Yes
Layer 2 remote port Yes Yes Yes Yes Yes
mirroring
Port mirroring Yes Yes Yes Yes Yes
- eMDI Yes Yes Yes Yes Yes
- NQA Yes Yes Yes Yes Yes
- NetStream Yes Yes Yes Yes Yes
- sFlow Yes Yes Yes Yes Yes
IP basic ICMP ICMP ping Yes Yes Yes Yes Yes
protocol ICMP6 ping Yes Yes Yes Yes Yes
- Tracert Yes Yes Yes Yes Yes
IP services ARP ARP entries 64K 64K 256K 64K 256K
ARP aging detection Yes Yes Yes Yes Yes
Intra-VLAN proxy ARP Yes Yes Yes Yes Yes
Inter-VLAN proxy ARP Yes Yes Yes Yes Yes
Dynamic ARP Yes Yes Yes Yes Yes
Multi-egress-interface ARP Yes Yes Yes Yes Yes
Routed proxy ARP Yes Yes Yes Yes Yes
Static ARP Yes Yes Yes Yes Yes
IPv4 protocol VRF Yes Yes Yes Yes Yes
stack
IPv6 protocol IPv6 address management Yes Yes Yes Yes Yes
stack
VRF Yes Yes Yes Yes Yes
ND ND support Yes Yes Yes Yes Yes
ND entries 32K 32K 128K 32K 128K
IP routing - Policy-based routing (PBR) Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 15

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
Routing policy Yes Yes Yes Yes Yes
IPv4 routing IPv4 routes 150K 1024K 2048K 1024K 2048K
BGP4 Yes Yes Yes Yes Yes
IPv4 static route Yes Yes Yes Yes Yes
IS-IS Yes Yes Yes Yes Yes
MBGP Yes Yes Yes Yes Yes
OSPF Yes Yes Yes Yes Yes
RIPv1 Yes Yes Yes Yes Yes
RIPv2 Yes Yes Yes Yes Yes
IPv6 routing IPv6 routes 150K 256K 512K 256K 512K
BGP4+ Yes Yes Yes Yes Yes
IS-IS IPv6 Yes Yes Yes Yes Yes
OSPFv3 Yes Yes Yes Yes Yes
RIPng Yes Yes Yes Yes Yes
URPF URPF check in strict mode Yes Yes Yes Yes Yes
URPF check in loose mode Yes Yes Yes Yes Yes
Multicast Layer 2 IGMP v1/v2/v3 snooping Yes Yes Yes Yes Yes
multicast
MLD snooping v1 Yes Yes Yes Yes Yes
MLD snooping v2 Yes Yes Yes Yes Yes
VLAN-based IGMP Yes Yes Yes Yes Yes
snooping proxy
Replication of multicast Yes Yes Yes Yes Yes
data across VLANs
Layer 3 BFD for PIM Yes Yes Yes Yes Yes
multicast
IGMPv1 Yes Yes Yes Yes Yes
IGMPv2 Yes Yes Yes Yes Yes
IGMPv3 Yes Yes Yes Yes Yes
MLDv1 Yes Yes Yes Yes Yes
MLDv2 Yes Yes Yes Yes Yes
MSDP Yes Yes Yes Yes Yes
PIM SM V6 Yes Yes Yes Yes Yes
PIM-DM Yes Yes Yes Yes Yes
PIM-DM v6 Yes Yes Yes Yes Yes
PIM-SM Yes Yes Yes Yes Yes
RPF Yes Yes Yes Yes Yes
IPv4 multicast routes 4K 32K 128K 32K 128K
IPv6 multicast routes 4K 32K 128K 32K 128K
Multicast route policy Yes Yes Yes Yes Yes
IP security ARP security VLAN-based ARP Miss Yes Yes Yes Yes Yes
packet suppression
VLAN-based ARP packet Yes Yes Yes Yes Yes
suppression
Global ARP packet Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 16

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
suppression
Source IP address-based Yes Yes Yes Yes Yes
ARP Miss packet
suppression
Source IP address-based Yes Yes Yes Yes Yes
ARP packet suppression
Source MAC address- Yes Yes Yes Yes Yes
based ARP packet
suppression
Interface-based ARP Miss Yes Yes Yes Yes Yes
packet suppression
Interface-based ARP Yes Yes Yes Yes Yes
packet suppression
Association between ARP Yes Yes Yes Yes Yes
and STP
ARP gateway attack Yes Yes Yes Yes Yes
inspection
Defense against ARP Yes Yes Yes Yes Yes
address spoofing attacks:
fixed-mac, fixed-all, and
send-ack
Sending gratuitous ARP Yes Yes Yes Yes Yes
packets
Egress ARP Inspection Yes Yes Yes Yes Yes
(EAI)
MFF Yes Yes Yes Yes Yes
ARP inspection against the Yes Yes Yes Yes Yes
dynamic binding tables
ARP inspection against the Yes Yes Yes Yes Yes
static binding tables
ICMP attack Global ICMP packet Yes Yes Yes Yes Yes
defense suppression
Interface-based ICMP Yes Yes Yes Yes Yes
packet suppression
IPSG IPv4 IPSG Yes Yes Yes Yes Yes
IPSG users 32000 32000 32000 32000 32000
IPv6 IPSG Yes Yes Yes Yes Yes
IPSGv6 users 32000 32000 32000 32000 32000
IPSG traffic check on a Yes Yes Yes Yes Yes
port
IPSG traffic check in a Yes Yes Yes Yes Yes
VLAN
Attack defense Defense against ICMP Yes Yes Yes Yes Yes
flood attacks
Local URPF Yes Yes Yes Yes Yes
Defense against TCP SYN Yes Yes Yes Yes Yes
flood attacks
Defense against UDP flood Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 17

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
attacks
Defense against packet Yes Yes Yes Yes Yes
fragment attacks
Defense against Yes Yes Yes Yes Yes
malformed packet attacks
Network BFD BFD for BGP Yes Yes Yes Yes Yes
reliability
BFD for IS-IS Yes Yes Yes Yes Yes
BFD for OSPF Yes Yes Yes Yes Yes
BFD for PIM Yes Yes Yes Yes Yes
BFD for VRRP Yes Yes Yes Yes Yes
BFD for static routes Yes Yes Yes Yes Yes
Single-hop BFD Yes Yes Yes Yes Yes
VRRP VRRP6 standard protocol Yes Yes Yes Yes Yes
VRRP standard protocol Yes Yes Yes Yes Yes
MPLS&VPN L2VPN PWE3 Yes Yes Yes Yes Yes
VLL Yes Yes Yes Yes Yes
VPLS Yes Yes Yes Yes Yes
L3VPN MCE (VRF Lite) Yes Yes Yes Yes Yes
MPLS IPv4 VPN Yes Yes Yes Yes Yes
MPLS IPv6 VPN (6VPE) Yes Yes Yes Yes Yes
MPLS QoS Mapping from 802.1p Yes Yes Yes Yes Yes
priorities to EXP priorities
in MPLS packets
Mapping from DSCP Yes Yes Yes Yes Yes
priorities to EXP priorities
in MPLS packets
MPLS services MPLS-TE protection group Yes Yes Yes Yes Yes
MPLS-TE tunnel Yes Yes Yes Yes Yes
establishment
MPLS-TE tunnels 512 512 512 512 512
MPLS LDP Yes Yes Yes Yes Yes
Double MPLS labels Yes Yes Yes Yes Yes
IP tunneling - GRE tunneling Yes Yes Yes Yes Yes
GRE tunnels 512 512 512 512 512
IPv6 manual tunneling Yes Yes Yes Yes Yes
User access AAA HWTACACS Yes Yes Yes Yes Yes
authentication
RADIUS authentication Yes Yes Yes Yes Yes
HWTACACS authorization Yes Yes Yes Yes Yes
HWTACACS accounting Yes Yes Yes Yes Yes
RADIUS accounting Yes Yes Yes Yes Yes
RADIUS authorization after Yes Yes Yes Yes Yes
successful authentication
Local authorization Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 18

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
Local authentication Yes Yes Yes Yes Yes
DHCP Sub-interface functioning Yes Yes Yes Yes Yes
as a DHCP client
Option82 function Yes Yes Yes Yes Yes
Relay agent function of a Yes Yes Yes Yes Yes
VLANIF interface in a
super VLAN
DHCP client function of a Yes Yes Yes Yes Yes
VLANIF interface
DHCP client function of the Yes Yes Yes Yes Yes
main interface for routing
Relay agent function of a Yes Yes Yes Yes Yes
VLANIF interface
VPLS DHCP snooping Yes Yes Yes Yes Yes
Dynamically assigning IP Yes Yes Yes Yes Yes
addresses to users
Relay agent function of the Yes Yes Yes Yes Yes
main interface for Ethernet
routing
Dynamic DHCP packet Yes Yes Yes Yes Yes
rate-limiting
VLANIF interface address Yes Yes Yes Yes Yes
pool-based DHCP server
function
VLAN-based DHCP Yes Yes Yes Yes Yes
snooping
Global address pool-based Yes Yes Yes Yes Yes
DHCP server function
Global DHCP snooping Yes Yes Yes Yes Yes
Interface-based DHCP Yes Yes Yes Yes Yes
snooping
Relay agent function of a Yes Yes Yes Yes Yes
sub-interface
DHCPv6 DHCPv6 relay Yes Yes Yes Yes Yes
VLAN-based DHCPv6 Yes Yes Yes Yes Yes
snooping
Global DHCPv6 snooping Yes Yes Yes Yes Yes
Interface-based DHCPv6 Yes Yes Yes Yes Yes
snooping
Stateless DHCPv6 Yes Yes Yes Yes Yes
Stateful DHCPv6 Yes Yes Yes Yes Yes
NAC Portal 2.01 authentication Yes Yes Yes Yes Yes
Guest VLAN Yes Yes Yes Yes Yes
IEEE 802.1X Yes Yes Yes Yes Yes
Layer 3 Portal Yes Yes Yes Yes Yes
authentication of IPv4
users

S7700 Series Smart Routing Switches 19

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
Layer 2 Portal Yes Yes Yes Yes Yes
authentication of IPv4
users
MAC address Yes Yes Yes Yes Yes
authentication on a
VLANIF interface
ETH-Trunk interface-based Yes Yes Yes Yes Yes
802.1X authentication
ETH-Trunk interface-based Yes Yes Yes Yes Yes
MAC address
authentication
MAC address-based Yes Yes Yes Yes Yes
802.1X authentication
Layer 2 Ethernet interface- Yes Yes Yes Yes Yes
based MAC authentication
Ethernet interface-based Yes Yes Yes Yes Yes
802.1X authentication
Hybrid authentication Yes Yes Yes Yes Yes
Functioning as the control Yes Yes Yes Yes Yes
device in terms of policy
association
- MACsec Yes Yes Yes Yes Yes
ND snooping Global ND snooping Yes Yes Yes Yes Yes
Interface-based ND Yes Yes Yes Yes Yes
snooping
VLAN-based ND snooping Yes Yes Yes Yes Yes
ACL Packet filtering IPv4 ACL rule 4K 4K 4K 4K 4K
at Layer 2 to IPv6 ACL rule 2K 2K 2K 2K 2K
Layer 4
Layer 2 ACL Yes Yes Yes Yes Yes
Basic IPv4 ACL Yes Yes Yes Yes Yes
Basic IPv6 ACL Yes Yes Yes Yes Yes
User group ACL Yes Yes Yes Yes Yes
User-defined ACL Yes Yes Yes Yes Yes
Advanced IPv4 ACL Yes Yes Yes Yes Yes
Advanced IPv6 ACL Yes Yes Yes Yes Yes
OPS - OPS No No Yes No Yes
QoS - HQoS Yes Yes Yes Yes Yes
CAR Traffic policing Yes Yes Yes Yes Yes
CPU defense Rate-limiting on the Yes Yes Yes Yes Yes
sending of protocol packets
to the CPU
Traffic Matching the simple Yes Yes Yes Yes Yes
classification domains of packets
Traffic classification based Yes Yes Yes Yes Yes
on ACLs
Configuring traffic Yes Yes Yes Yes Yes

S7700 Series Smart Routing Switches 20

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
classification priorities
Traffic behavior Modifying the packet Yes Yes Yes Yes Yes
VLANs
Modifying the packet Yes Yes Yes Yes Yes
priorities
Modifying the simple Yes Yes Yes Yes Yes
domains of packets
Traffic policing (CAR) Yes Yes Yes Yes Yes
Traffic filtering Yes Yes Yes Yes Yes
Traffic mirroring Yes Yes Yes Yes Yes
Traffic shaping Traffic shaping on an Yes Yes Yes Yes Yes
egress interface
Traffic shaping on queues Yes Yes Yes Yes Yes
on an interface
Congestion Tail drop Yes Yes Yes Yes Yes
avoidance
Weighted Random Early Yes Yes Yes Yes Yes
Detection (WRED) on
interfaces
WRED on queues Yes Yes Yes Yes Yes
Congestion Priority Queuing (PQ) + Yes Yes Yes Yes Yes
management Weighted Deficit Round
Robin (WDRR)
PQ + Weighted Round Yes Yes Yes Yes Yes
Robin (WRR)
PQ Yes Yes Yes Yes Yes
WDRR Yes Yes Yes Yes Yes
WRR Yes Yes Yes Yes Yes
VXLAN BGP EVPN Dynamic creation of No No Yes No Yes
VXLAN tunnels through
BGP EVPN
BGP EVPN neighbor No No 1000 No 1000
specifications
IPv4 gateway IPv4 address configured No No Yes No Yes
for a VBDIF interface
Distributed VXLAN IPv4 No No Yes No Yes
gateway
Centralized VXLAN IPv4 No No Yes No Yes
gateway
IPv6 gateway IPv6 address configured No No Yes No Yes
for a VBDIF interface
Distributed VXLAN IPv6 No No Yes No Yes
gateway
Centralized VXLAN IPv6 No No Yes No Yes
gateway
- VXLAN Layer 2 gateway No No Yes No Yes
WLAN - AP management Yes Yes Yes Yes Yes
Number of managed APs 512 1K 4K 1K 4K

S7700 Series Smart Routing Switches 21

Function and Feature Description S7703+ S7706+ S7706+ S7712+ S7712+
MCUA SRUA/S SRUE/S SRUA/S SRUE/
RUB RUH RUB SRUH
WLAN QoS Yes Yes Yes Yes Yes
WLAN service Yes Yes Yes Yes Yes
management
WLAN security Yes Yes Yes Yes Yes
Radio management Yes Yes Yes Yes Yes
WLAN user management Yes Yes Yes Yes Yes
Interoperability - VLAN-based Spanning Yes Yes Yes Yes Yes
Tree (VBST)
Link-type Negotiation Yes Yes Yes Yes Yes
Protocol (LNP)
VLAN Central Yes Yes Yes Yes Yes
Management Protocol
(VCMP)
Value-added - Firewall Yes Yes Yes Yes Yes
service1 NAT Yes Yes Yes Yes Yes
NetStream Yes Yes Yes Yes Yes
IPSec Yes Yes Yes Yes Yes
Load balancing Yes Yes Yes Yes Yes
IPS Yes Yes Yes Yes Yes

1: The S7700 supports the NGFW, which is the next-generation firewall card, and the IPS card. For more specification
information of IPS card, visit
http://support.huawei.com/enterprise/docinforeader.action?contentId=DOC1000047724&idPath=7919710|9856724|21430824|21
100539|21081581.

Hardware Specifications
The following table lists the hardware specifications of the S7700.

Hardware specifications of S7703 and S7703-PoE models

Item S7703 S7703-PoE

Physical Chassis dimensions (W x D x 442 x 489 x 175 442 x 489 x 175
specifications H, mm)
Chassis height 4U 4U
Weight (empty/fully loaded) 10 kg/31.6 kg 10.3 kg/33.8 kg
Main control unit slots 2 2
LPU slots 3 3
Slot direction Horizontal Horizontal
Environment Operating altitude and  -60 m to +1800 m: 0°C to 45°C  -60 m to +1800 m: 0°C to 45°C
parameters temperature  1800 m to 4000 m: The  1800 m to 4000 m: The
operating temperature operating temperature decreases
decreases 1°C for every 220 m 1°C for every 220 m increase in
increase in altitude. altitude.
 More than 4000 m: 0°C to 35°C  More than 4000 m: 0°C to 35°C
Storage temperature -40°C to +70°C -40°C to +70°C
Operating relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing
Storage relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing

S7700 Series Smart Routing Switches 22

Item S7703 S7703-PoE
Noise under normal ≤ 72 dB ≤ 72 dB
temperature
Ingress Protection (IP) level IP20 IP20
System power System's maximum power 1000 W 1185 W
supply consumption
Power supply slots 2 3
800 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),  Output power: 800 W (220 V),
400 W (110 V) 400 W (110 V)
Backup mode 2 (1:1) 3 (M+N)
System's  800 W (220 V)  2400 W (220 V)
maximum power  400 W (110 V)  1200 W (110 V)
supply capability
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),  Output power: 2200 W (220 V),
1100 W (110 V) 1100 W (110 V)
Backup mode 2 (1:1) 3 (M+N)
System's  2200 W (220 V)  6600 W (220 V)
maximum power  1100 W (110 V)  3300 W (110 V)
supply capability
3000 W Surge protection  Common mode: ±6 kV  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV  Differential mode: ±6 kV
(power port)
Input voltage and AC: AC:
output power  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),  Output power: 3000 W (220 V),
1500 W (110 V) 1500 W (110 V)
DC: DC:
 Input power: 190 V DC to 290 V  Input power: 190 V DC to 290 V
DC DC
 Output power: 3000 W (rated  Output power: 3000 W (rated
voltage of 240 V DC) voltage of 240 V DC)
Backup mode 2 (1:1) 3 (M+N)
System's  3000 W (220 V)  9000 W (220 V)
maximum power  1500 W (110 V)  4500 W (110 V)
supply capability
1600 W Surge protection  Common mode: ±2 kV  Common mode: ±2 kV
DC specification  Differential mode: ±1 kV  Differential mode: ±1 kV
(power port)
Input voltage and  Input voltage: -38.4 V to -72 V NA
output power  Output power:1600 W
Backup mode 2 (1:1) NA
System's 1600 W NA
maximum power
supply capability

S7700 Series Smart Routing Switches 23

Item S7703 S7703-PoE
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
DC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: -40 V to -72 V  Input voltage: -40 V to -72 V
output power  Output power: 2200 W  Output power: 2200 W
Backup mode 2 (1:1) 3 (M+N)
System's 2200 W 6600 W
maximum power
supply capability
PoE power Relationships between PoE PoE power supply is independent of They share the power supply slots,
supply power supply and system the system power supply. A non- and N+0/N+1/N+N/AUTO backup is
power supply PoE chassis does not provide the supported.
PoE power supply.
PoE power supply slot 1 3
800 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),  Output power: 800 W (220 V),
400 W (110 V) 400 W (110 V)
Backup mode 1 (no backup) N+0/N+1/N+N/AUTO backup
System's  800 W (220 V)  Up to 2400 W (220 V)
maximum PoE  400 W (110 V)  Up to 1200 W (110 V)
power output
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),  Output power: 2200 W (220 V),
1100 W (110 V) 1100 W (110 V)
Backup mode 1 (no backup) N+0/N+1/N+N/AUTO backup
System's  2200 W (220 V)  Up to 6600 W (220 V)
maximum PoE  1100 W (110 V)  Up to 3300 W (110 V)
power output
3000 W Surge protection  Common mode: ±6 kV  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV  Differential mode: ±6 kV
(power port)
Input voltage and AC: AC:
output power  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),  Output power: 3000 W (220 V),
1500 W (110 V) 1500 W (110 V)
DC: DC:
 Input power: 190 V DC to 290 V  Input power: 190 V DC to 290 V
DC DC
 Output power: 3000 W (rated  Output power: 3000 W (rated
voltage of 240 V) voltage of 240 V)
Backup mode 1 (no backup) N+0/N+1/N+N/AUTO backup
System's  3000 W (220 V)  Up to 9000 W (220 V)
maximum PoE  1500 W (110 V)  Up to 4500 W (110 V)
power output
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV

S7700 Series Smart Routing Switches 24

Item S7703 S7703-PoE
DC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: -40 V to -72 V  Input voltage: -40 V to -72 V
output power  Output power: 2200 W  Output power: 2200 W
Backup mode 1 (no backup) N+0/N+1/N+N/AUTO backup
System's 2200 W Up to 6600 W
maximum PoE
power output
System heat Heat dissipation mode Use of fans for heat dissipation Use of fans for heat dissipation
dissipation
Airflow direction Left-to-rear Left-to-rear
Automated fan speed Supported Supported
adjustment
Heat dissipation (BTU/hour) Maximum power consumption Maximum power consumption
(W)*3.4121 (W)*3.4121
Coefficient of Performance  Normal temperature: 70  Normal temperature: 70
(COP)  High temperature: 21.8  High temperature: 21.8
Number of fan trays 1 1
Hardware MTBF (year) 1
33.8 33.8
reliability
MTTR (minute) 1
64 64
Availability 1
0.9999964 0.9999964
Fan backup 1 fan tray 1 fan tray
MCU and SFU backup Main control units work in hot Main control units work in hot
standby mode. standby mode.
Hot swappable design Power modules, fan trays, CSS Power modules, fan trays, CSS
subcards, and all cards are hot subcards, and all cards are hot
swappable. swappable.
CMU backup N/A N/A
Technical Port Maximum number 144 144
specifications density of FE ports
Maximum of GE 144 144
ports
Maximum number 144 144
of 10GE ports
Maximum of 40GE 24 24
ports
Maximum of 12 12
100GE ports
PoE port PoE standards  802.3af (PoE)  802.3af (PoE)
density compliance  802.3at (PoE+)  802.3at (PoE+)
 802.3bt (PoE++)
Number of PoE 48 48
ports per interface
card2

Hardware specifications of S7706 and S7706-PoE models

Item S7706 S7706-PoE

Physical Chassis dimensions (W x D x 442 x 489 x 441.7 442 x 489 x 441.7

S7700 Series Smart Routing Switches 25

Item S7706 S7706-PoE
specifications H, mm)
Chassis height 10 U 10 U
Weight (empty/fully loaded) 15 kg/61.8 kg 21.3 kg/78.1 kg
Main control unit slots 2 2
LPU slots 6 6
Slot direction Horizontal Horizontal
Environment Operating altitude and  -60 m to +1800 m: 0°C to 45°C  -60 m to +1800 m: 0°C to 45°C
parameters temperature  1800 m to 4000 m: The  1800 m to 4000 m: The
operating temperature operating temperature decreases
decreases 1°C for every 220 m 1°C for every 220 m increase in
increase in altitude. altitude.
 More than 4000 m: 0°C to 35°C  More than 4000 m: 0°C to 35°C
Storage temperature -40°C to +70°C -40°C to +70°C
Operating relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing
Storage relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing
Noise under normal ≤ 72 dB ≤ 72 dB
temperature
Ingress Protection (IP) level IP20 IP20
System power System's maximum power 2200 W 2640 W
supply consumption
Power supply slots 4 8
800 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),  Output power: 800 W (220 V),
400 W (110 V) 400 W (110 V)
Backup mode 4 (2:2) 8 (M+N)
System's  1600 W (220 V)  6400 W (220 V)
maximum power  800 W (110 V)  3200 W (110 V)
supply capability
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),  Output power: 2200 W (220 V),
1100 W (110 V) 1100 W (110 V)
Backup mode 4 (2:2) 8 (M+N)
System's  4400 W (220 V)  19600 W (220 V)
maximum power  2200 W (110 V)  8800 W (110 V)
supply capability
3000 W Surge protection  Common mode: ±6 kV  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV  Differential mode: ±6 kV
(power port)
Input voltage and AC: AC:
output power  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),  Output power: 3000 W (220 V),
1500 W (110 V) 1500 W (110 V)
DC: DC:

S7700 Series Smart Routing Switches 26

Item S7706 S7706-PoE
 Input power: 190 V DC to 290 V  Input power: 190 V DC to 290 V
DC DC
 Output power: 3000 W (rated  Output power: 3000 W (rated
voltage of 240 V DC) voltage of 240 V DC)
Backup mode 4 (2:2) 8 (M+N)
System's  4400 W (220 V)  24000 W (220 V)
maximum power  3000 W (110 V)  12000 W (110 V)
supply capability
1600 W Surge protection  Common mode: ±2 kV  Common mode: ±2 kV
DC specification  Differential mode: ±1 kV  Differential mode: ±1 kV
(power port)
Input voltage and  Input voltage: -38.4 V to -72 V NA
output power  Output power:1600 W
Backup mode 2 (1:1) NA
System's 1600 W NA
maximum power
supply capability
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
DC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: -40 V to -72 V  Input voltage: -40 V to -72 V
output power  Output power: 2200 W  Output power: 2200 W
Backup mode 4 (2+2) 8 (M+N)
System's 4400 W 19600 W
maximum power
supply capability
PoE power Relationships between PoE PoE power supply is independent of They share the power supply slots,
supply power supply and system the system power supply. A non- and N+0/N+1/N+N/AUTO backup is
power supply PoE chassis does not provide the supported.
PoE power supply.
PoE power supply slot 4 8
800 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),  Output power: 800 W (220 V),
400 W (110 V) 400 W (110 V)
Backup mode 4 (M+N) N+0/N+1/N+N/AUTO backup
System's  3200 W (220 V)  Up to 6400 W (220 V)
maximum PoE  1600 W (110 V)  Up to 3200 W (110 V)
power output
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),  Output power: 2200 W (220 V),
1100 W (110 V) 1100 W (110 V)
Backup mode 4 (M+N) N+0/N+1/N+N/AUTO backup
System's  8800 W (220 V)  Up to 19600 W (220 V)
maximum PoE  4400 W (110 V)  Up to 8800 W (110 V)
power output

S7700 Series Smart Routing Switches 27

Item S7706 S7706-PoE
3000 W Surge protection  Common mode: ±6 kV  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV  Differential mode: ±6 kV
(power port)
Input voltage and AC: AC:
output power  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),  Output power: 3000 W (220 V),
1500 W (110 V) 1500 W (110 V)
DC: DC:
 Input power: 190 V DC to 290 V  Input power: 190 V DC to 290 V
DC DC
 Output power: 3000 W (rated  Output power: 3000 W (rated
voltage of 240 V) voltage of 240 V)
Backup mode 4 (M+N) N+0/N+1/N+N/AUTO backup
System's  8800 W (220 V)  Up to 24000 W (220 V)
maximum PoE  6000 W (110 V)  Up to 12000 W (110 V)
power output
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
DC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: -40 V to -72 V  Input voltage: -40 V to -72 V
output power  Output power: 2200 W  Output power: 2200 W
Backup mode 4 (M+N) N+0/N+1/N+N/AUTO backup
System's 8800 W Up to 19600 W
maximum PoE
power output
System heat Heat dissipation mode Use of fans for heat dissipation Use of fans for heat dissipation
dissipation Airflow direction Left-to-rear Left-to-rear
Automated fan speed Supported Supported
adjustment
Heat dissipation (BTU/hour) Maximum power consumption Maximum power consumption
(W)*3.4121 (W)*3.4121
Coefficient of Performance  Normal temperature: 70  Normal temperature: 70
(COP)  High temperature: 21.8  High temperature: 21.8
Number of fan trays 2 2
Hardware MTBF (year)1 24.2 24.2
reliability MTTR (minute) 1
52 52
Availability 1
0.9999959 0.9999959
Fan backup 2 fan trays 2 fan trays
MCU and SFU backup Main control units work in hot Main control units work in hot
standby mode and SFUs works in standby mode and SFUs works in
1+1 load balancing mode. 1+1 load balancing mode.
Hot swappable design Power modules, fan trays, CSS Power modules, fan trays, CSS
subcards, and all cards are hot subcards, and all cards are hot
swappable. swappable.
CMU backup Active/standby redundant backup Active/standby redundant backup
Technical Port Maximum number 288 288
specifications density of FE ports
Maximum of GE 288 288
ports

S7700 Series Smart Routing Switches 28

Item S7706 S7706-PoE
Maximum number 288 288
of 10GE ports
Maximum of 40GE 48 48
ports
Maximum of 24 24
100GE ports
PoE port PoE standards  802.3af (PoE)  802.3af (PoE)
density compliance  802.3at (PoE+)  802.3at (PoE+)
 802.3bt (PoE++)
Number of PoE 48 48
ports per interface
card2

Hardware specifications of S7712 models

Item S7712 (Without PoE) S7712 (With PoE)

Physical Chassis dimensions (W x D x 442 x 489 x 663.95 442 x 489 x 663.95
specifications H, mm)
Chassis height 15 U 15 U
Weight (empty/fully loaded) 25 kg/97 kg 25 kg/97 kg
Main control unit slots 2 2
LPU slots 12 12
Slot direction Horizontal Horizontal
Environment Operating altitude and  -60 m to +1800 m: 0°C to 45°C  -60 m to +1800 m: 0°C to 45°C
parameters temperature  1800 m to 4000 m: The  1800 m to 4000 m: The
operating temperature operating temperature
decreases 1°C for every 220 m decreases 1°C for every 220 m
increase in altitude. increase in altitude.
 More than 4000 m: 0°C to 35°C  More than 4000 m: 0°C to 35°C
Storage temperature -40°C to +70°C -40°C to +70°C
Operating relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing
Storage relative humidity 5% RH to 95% RH, noncondensing 5% RH to 95% RH, noncondensing
Noise under normal ≤ 72 dB ≤ 72 dB
temperature
Ingress Protection (IP) level IP20 IP20
System power System's maximum power 4200 W 4200 W
supply consumption
Power supply slots 4 4
800 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ± 2kV  Differential mode: ± 2kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),  Output power: 800 W (220 V),
400 W (110 V) 400 W (110 V)
Backup mode 4 (2:2) 4 (2:2)
System's  1600 W (220 V)  1600 W (220 V)
maximum power  800 W (110 V)  800 W (110 V)
supply capability

S7700 Series Smart Routing Switches 29

Item S7712 (Without PoE) S7712 (With PoE)
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),  Output power: 2200 W (220 V),
1100 W (110 V) 1100 W (110 V)
Backup mode 4 (2:2) 4 (2:2)
System's  4400 W (220 V)  4400 W (220 V)
maximum power  2200 W (110 V)  2200 W (110 V)
supply capability
3000 W Surge protection  Common mode: ±6 kV  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV  Differential mode: ±6 kV
(power port)
Input voltage and AC: AC:
output power  Input voltage: 90 V to 290 V  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),  Output power: 3000 W (220 V),
1500 W (110 V) 1500 W (110 V)
DC: DC:
 Input power: 190 V DC to 290 V  Input power: 190 V DC to 290 V
DC DC
 Output power: 3000 W (rated  Output power: 3000 W (rated
voltage of 240 V DC) voltage of 240 V DC)
Backup mode 4 (2:2) 4 (2:2)
System's  4400 W (220 V)  4400 W (220 V)
maximum power  3000 W (110 V)  3000 W (110 V)
supply capability
1600 W Surge protection  Common mode: ±2 kV  Common mode: ±2 kV
DC specification  Differential mode: ±1 kV  Differential mode: ±1 kV
(power port)
Input voltage and  Input voltage: -38.4 V to -72 V  Input voltage: -38.4 V to -72 V
output power  Output power:1600 W  Output power:1600 W
Backup mode 2 (1:1) 2 (1:1)
System's 1600 W 1600 W
maximum power
supply capability
2200 W Surge protection  Common mode: ±4 kV  Common mode: ±4 kV
DC specification  Differential mode: ±2 kV  Differential mode: ±2 kV
(power port)
Input voltage and  Input voltage: -40 V to -72 V  Input voltage: -40 V to -72 V
output power  Output power: 2200 W  Output power: 2200 W
Backup mode 4 (2+2) 4 (2+2)
System's 4400 W 4400 W
maximum power
supply capability
PoE power Relationships between PoE PoE power supply is independent of PoE power supply is independent of
supply power supply and system the system power supply. A non- the system power supply. A non-
power supply PoE chassis does not provide the PoE chassis does not provide the
PoE power supply. PoE power supply.
PoE power supply slot 0 4
800 W Surge protection NA  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV

S7700 Series Smart Routing Switches 30

Item S7712 (Without PoE) S7712 (With PoE)
(power port)
Input voltage and NA  Input voltage: 90 V to 290 V
output power  Output power: 800 W (220 V),
400 W (110 V)
Backup mode NA 4 (M+N)
System's NA  3200 W (220 V)
maximum PoE  1600 W (110 V)
power output
2200 W Surge protection NA  Common mode: ±4 kV
AC specification  Differential mode: ±2 kV
(power port)
Input voltage and NA  Input voltage: 90 V to 290 V
output power  Output power: 2200 W (220 V),
1100 W (110 V)
Backup mode NA 4 (M+N)
System's NA  8800 W (220 V)
maximum PoE  4400 W (110 V)
power output
3000 W Surge protection NA  Common mode: ±6 kV
AC specification  Differential mode: ±6 kV
(power port)
Input voltage and NA AC:
output power  Input voltage: 90 V to 290 V
 Output power: 3000 W (220 V),
1500 W (110 V)
DC:
 Input power: 190 V DC to 290 V
DC
 Output power: 3000 W (rated
voltage of 240 V)
Backup mode NA 4 (M+N)
System's NA  8800 W (220 V)
maximum PoE  6000 W (110 V)
power output
2200 W Surge protection NA  Common mode: ±4 kV
DC specification  Differential mode: ±2 kV
(power port)
Input voltage and NA  Input voltage: -40 V to -72 V
output power  Output power: 2200 W
Backup mode NA 4 (M+N)
System's NA 8800 W
maximum PoE
power output
System heat Heat dissipation mode Use of fans for heat dissipation Use of fans for heat dissipation
dissipation
Airflow direction Left-to-rear Left-to-rear
Automated fan speed Supported Supported
adjustment
Heat dissipation (BTU/hour) Maximum power consumption Maximum power consumption
(W)*3.4121 (W)*3.4121
Coefficient of Performance  Normal temperature: 70  Normal temperature: 70

S7700 Series Smart Routing Switches 31

Item S7712 (Without PoE) S7712 (With PoE)
(COP)  High temperature: 21.8  High temperature: 21.8
Number of fan trays 4 4
Hardware MTBF (year)1 24.1 24.1
reliability
MTTR (minute)1 52 52
Availability 1
0.9999959 0.9999959
Fan backup 4 fan trays 4 fan trays
MCU and SFU backup Main control units work in hot Main control units work in hot
standby mode and SFUs works in standby mode and SFUs works in
1+1 load balancing mode. 1+1 load balancing mode.
Hot swappable design Power modules, fan trays, CSS Power modules, fan trays, CSS
subcards, and all cards are hot subcards, and all cards are hot
swappable. swappable.
CMU backup Active/standby redundant backup Active/standby redundant backup
Technical Port Maximum number 576 576
specifications density of FE ports
Maximum of GE 576 576
ports
Maximum number 576 576
of 10GE ports
Maximum of 40GE 96 96
ports
Maximum of 48 48
100GE ports
PoE port PoE standards NA  802.3af (PoE)
density compliance  802.3at (PoE+)
Number of PoE NA 48
ports per interface
card2

1: The reliability parameter values are calculated based on the typical configuration of the device. The parameter values vary
according to the modules configured by the customer.
2: The number of working PoE ports depends on the maximum PoE power provided by the device and the maximum power
consumption of PDs.

Networking and Applications

Large-Sized Campus Networks
The S7700 can be used as an aggregation switch on a large-scale campus network, helping to build a highly reliable, scalable,
and manageable enterprise network. With hardware-based CPU queue scheduling and firewall modules, the S7700 enhances
security at the aggregation layer and protects the enterprise's core network from DDoS attacks and other security threats.

S7700 Series Smart Routing Switches 32

Small- and Medium-Sized Campus Networks
The S7700 implements line-speed forwarding of OSPF, BGP, and MPLS packets. With its firewall and IPSec modules, the
S7700 can work at the core layer of small- and medium-sized campus networks. It provides a cost-effective, reliable, and easy-
to-deploy network solution for small- and medium-sized enterprises.

Safety and Regulatory Compliance

The following table lists the safety and regulatory compliance of the S7700.

Safety and regulatory compliance of the S7700 series

Certification Category Description

Safety  IEC 60950-1
 EN 60950-1
 UL 60950-1
 CSA C22.2 No 60950-1
 AS/NZS 60950.1
 BS EN 60950-1
 CNS 14336-1
Electromagnetic Compatibility  CISPR22 Class A

S7700 Series Smart Routing Switches 33

 Certification Category Description
(EMC)  CISPR24
 EN55022 Class A
 EN55024
 ETSI EN 300 386 Class A
 CFR 47 FCC Part 15 Class A
 ICES 003 Class A
 AS/NZS CISPR22 Class A
 VCCI Class A
 IEC61000-6-2
 IEC61000-6-4
 IEC61000-4-2
 ITU-T K 20
 ITU-T K 21
 ITU-T K 44
 CNS13438
Environment  RoHS
 REACH
 WEEE
Laser safety  IEC60825-1
 IEC60825-2
 EN60825-1
 EN60825-2

MIB and Standards Compliance

The following table lists the MIBs supported by the S7700 series.

MIBs supported by the S7700 series

Category MIB
Public MIB  BGP4-MIB
 BRIDGE-MIB
 DISMAN-NSLOOKUP-MIB
 DISMAN-PING-MIB
 DISMAN-TRACEROUTE-MIB
 ENTITY-MIB
 EtherLike-MIB
 IF-MIB
 IP-FORWARD-MIB
 IPMCAST-MIB
 IPv6-ICMP-MIB
 IPv6-MIB
 IPv6-TCP-MIB
 IPv6-UDP-MIB
 ISIS-MIB
 LAG-MIB
 LLDP-EXT-DOT1-MIB
 LLDP-EXT-DOT3-MIB
 LLDP-MIB
 MGMD-STD-MIB

S7700 Series Smart Routing Switches 34

 Category MIB
 MPLS-FTN-STD-MIB
 MPLS-L3VPN-STD-MIB
 MPLS-LDP-GENERIC-STD-MIB
 MPLS-LDP-STD-MIB
 MPLS-LSR-STD-MIB
 MPLS-TE-STD-MIB
 MSDP-MIB
 NOTIFICATION-LOG-MIB
 NQA-MIB
 OSPF-MIB
 OSPF-TRAP-MIB
 P-BRIDGE-MIB
 PIM-BSR-MIB
 PIM-STD-MIB
 Q-BRIDGE-MIB
 RFC1213-MIB
 RIPv2-MIB
 RMON2-MIB
 RMON-MIB
 SAVI-MIB
 SNMP-FRAMEWORK-MIB
 SNMP-MPD-MIB
 SNMP-NOTIFICATION-MIB
 SNMP-TARGET-MIB
 SNMP-USER-BASED-SM-MIB
 SNMPv2-MIB
 SNMP-VIEW-BASED-ACM-MIB
 TCP-MIB
 UDP-MIB
 VRRP-MIB
 VRRPv3-MIB
Huawei-proprietary MIB  HUAWEI-AAA-MIB
 HUAWEI-ACL-MIB
 HUAWEI-ALARM-MIB
 HUAWEI-ALARM-RELIABILITY-MIB
 HUAWEI-BASE-TRAP-MIB
 HUAWEI-BFD-MIB
 HUAWEI-BGP-VPN-MIB
 HUAWEI-BRAS-RADIUS-MIB
 HUAWEI-BRAS-SRVCFG-EAP-MIB
 HUAWEI-BRAS-SRVCFG-STATICUSER-MIB
 HUAWEI-BULKSTAT-MIB
 HUAWEI-CBQOS-MIB
 HUAWEI-CCC-MIB
 HUAWEI-CONFIG-MAN-MIB
 HUAWEI-CLOCK-MIB
 HUAWEI-CPU-MIB
 HUAWEI-DAD-MIB
 HUAWEI-DC-TRAP-MIB
 HUAWEI-DATASYNC-MIB
 HUAWEI-DEVICE-MIB

S7700 Series Smart Routing Switches 35

 Category MIB
 HUAWEI-DHCPR-MIB
 HUAWEI-DHCPS-MIB
 HUAWEI-DHCP-SNOOPING-MIB
 HUAWEI-DIE-MIB
 HUAWEI-DNS-MIB
 HUAWEI-DLDP-MIB
 HUAWEI-ERPS-MIB
 HUAWEI-ERRORDOWN-MIB
 HUAWEI-ENERGYMNGT-MIB
 HUAWEI-EASY-OPERATION-MIB
 HUAWEI-ENTITY-EXTENT-MIB
 HUAWEI-ENTITY-TRAP-MIB
 HUAWEI-ETHARP-MIB
 HUAWEI-ETHOAM-MIB
 HUAWEI-E-TRUNK-MIB
 HUAWEI-FLASH-MAN-MIB
 HUAWEI-FTP-MIB
 HUAWEI-FWD-RES-TRAP-MIB
 HUAWEI-GARP-APP-MIB
 HUAWEI-GTL-MIB
 HUAWEI-GTSM-MIB
 HUAWEI-HGMP-MIB
 HUAWEI-HQOS-MIB
 HUAWEI-HWTACACS-MIB
 HUAWEI-IF-EXT-MIB
 HUAWEI-INFOCENTER-MIB
 HUAWEI-IPFPM-MIB
 HUAWEI-IPLPM-MIB
 HUAWEI-IPMCAST-MIB
 HUAWEI-IPPOOL-MIB
 HUAWEI-IPSESSION-MIB
 HUAWEI-IPV6-MIB
 HUAWEI-ISOLATE-MIB
 HUAWEI-KOMPELLA-MIB
 HUAWEI-L2IF-MIB
 HUAWEI-L2MAM-MIB
 HUAWEI-L2MULTICAST-MIB
 HUAWEI-L2VLAN-MIB
 HUAWEI-L2VPN-MIB
 HUAWEI-LDT-MIB
 HUAWEI-LSP-PING-TRACE-TRAP-MIB
 HUAWEI-LINE-MIB
 HUAWEI-LLDP-MIB
 HUAWEI-MAC-AUTHEN-MIB
 HUAWEI-MDNS-RELAY-MIB
 HUAWEI-MEMORY-MIB
 HUAWEI-MFF-MIB
 HUAWEI-MFLP-MIB
 HUAWEI-MGMD-STD-MIB
 HUAWEI-MPLS-EXTEND-MIB
 HUAWEI-MPLSLDP-MIB

S7700 Series Smart Routing Switches 36

 Category MIB
 HUAWEI-MPLSLSR-EXT-MIB
 HUAWEI-MPLSOAM-MIB
 HUAWEI-MSDP-MIB
 HUAWEI-MSTP-MIB
 HUAWEI-MULTICAST-MIB
 HUAWEI-NETSTREAM-MIB
 HUAWEI-NTPV3-MIB
 HUAWEI-OSPFV2-MIB
 HUAWEI-OSPFV3-MIB
 HUAWEI-PERFORMANCE-MIB
 HUAWEI-PIM-BSR-MIB
 HUAWEI-PIM-STD-MIB
 HUAWEI-PERFMGMT-MIB
 HUAWEI-PORT-MIB
 HUAWEI-PORTAL-MIB
 HUAWEI-PWE3-MIB
 HUAWEI-PWE3-TNL-MIB
 HUAWEI-QINQ-MIB
 HUAWEI-RIPv2-EXT-MIB
 HUAWEI-RM-EXT-MIB
 HUAWEI-RRPP-MIB
 HUAWEI-RSVPTE-MIB
 HUAWEI-SECURITY-MIB
 HUAWEI-SEP-MIB
 HUAWEI-SMARTLINK-MIB
 HUAWEI-SNMP-EXT-MIB
 HUAWEI-SSH-MIB
 HUAWEI-STACK-MIB
 HUAWEI-SWITCH-L2MAM-EXT-MIB
 HUAWEI-SWITCH-SRV-TRAP-MIB
 HUAWEI-SYS-MAN-MIB
 HUAWEI-TASK-MIB
 HUAWEI-TCP-MIB
 HUAWEI-TFTPC-MIB
 HUAWEI-TRNG-MIB
 HUAWEI-TUNNEL-MIB
 HUAWEI-TUNNEL-TE-MIB
 HUAWEI-UNIMNG-MIB
 HUAWEI-USC-MIB
 HUAWEI-VPLS-EXT-MIB
 HUAWEI-VPLS-TNL-MIB
 HUAWEI-VPN-DIAGNOSTICS-MIB
 HUAWEI-VRRP-EXT-MIB
 HUAWEI-WLAN-DEVICE-MIB
 HUAWEI-WLAN-QOS-MIBB
 HUAWEI-WLAN-RADIO-MIB
 HUAWEI-WLAN-SECURITY-MIB
 HUAWEI-WLAN-SERVICE-MIB
 HUAWEI-WLAN-SYS-MIB
 HUAWEI-WLAN-UPDATE-MIB
 HUAWEI-WLAN-WIDS-MIB

S7700 Series Smart Routing Switches 37

 Category MIB
 HUAWEI-XQOS-MIB

For more information about MIBs supported by the S7700 series, visit https://support.huawei.com/enterprise/en/switches/s7700-
pid-6805481?category=reference-guides&subcategory=mib-reference

Supported MIBs
Standard Compliance
The following table lists the standards that the S7700 complies with.

Standard compliance list of the S7700 series

Standard Organization Standard or Protocol

IETF  RFC 768 User Datagram Protocol (UDP)
 RFC 792 Internet Control Message Protocol (ICMP)
 RFC 793 Transmission Control Protocol (TCP)
 RFC 826 Ethernet Address Resolution Protocol (ARP)
 RFC 854 Telnet Protocol Specification
 RFC 951 Bootstrap Protocol (BOOTP)
 RFC 959 File Transfer Protocol (FTP)
 RFC 1058 Routing Information Protocol (RIP)
 RFC 1112 Host extensions for IP multicasting
 RFC 1157 A Simple Network Management Protocol (SNMP)
 RFC 1256 ICMP Router Discovery
 RFC 1305 Network Time Protocol Version 3 (NTP)
 RFC 1349 Internet Protocol (IP)
 RFC 1493 Definitions of Managed Objects for Bridges
 RFC 1542 Clarifications and Extensions for the Bootstrap Protocol
 RFC 1643 Ethernet Interface MIB
 RFC 1757 Remote Network Monitoring (RMON)
 RFC 1901 Introduction to Community-based SNMPv2
 RFC 1902-1907 SNMP v2
 RFC 1981 Path MTU Discovery for IP version 6
 RFC 2131 Dynamic Host Configuration Protocol (DHCP)
 RFC 2328 OSPF Version 2
 RFC 2453 RIP Version 2
 RFC 2460 Internet Protocol, Version 6 Specification (IPv6)
 RFC 2461 Neighbor Discovery for IP Version 6 (IPv6)
 RFC 2462 IPv6 Stateless Address Auto configuration
 RFC 2463 Internet Control Message Protocol for IPv6 (ICMPv6)
 RFC 2474 Differentiated Services Field (DS Field)
 RFC 2740 OSPF for IPv6 (OSPFv3)
 RFC 2863 The Interfaces Group MIB
 RFC 2597 Assured Forwarding PHB Group
 RFC 2598 An Expedited Forwarding PHB
 RFC 2571 SNMP Management Frameworks
 RFC 2865 Remote Authentication Dial In User Service (RADIUS)
 RFC 3046 DHCP Option82
 RFC 3376 Internet Group Management Protocol, Version 3 (IGMPv3)
 RFC 3513 IP Version 6 Addressing Architecture
 RFC 3579 RADIUS Support For EAP
 RFC 4271 A Border Gateway Protocol 4 (BGP-4)

S7700 Series Smart Routing Switches 38

 Standard Organization Standard or Protocol
 RFC 4760 Multiprotocol Extensions for BGP-4
 draft-grant-tacacs-02 TACACS+
 RFC 6241 Network Configuration Protocol (NETCONF)
 RFC 6020 YANG - A Data Modeling Language for the Network Configuration Protocol
(NETCONF)
IEEE  IEEE 802.1D Media Access Control (MAC) Bridges
 IEEE 802.1p Traffic Class Expediting and Dynamic Multicast Filtering
 IEEE 802.1Q Virtual Bridged Local Area Networks
 IEEE 802.1ad Provider Bridges
 IEEE 802.2 Logical Link Control
 IEEE Std 802.3 CSMA/CD
 IEEE Std 802.3ab 1000BASE-T specification
 IEEE Std 802.3ad Aggregation of Multiple Link Segments
 IEEE Std 802.3ae 10GE WEN/LAN Standard
 IEEE Std 802.3x Full Duplex and flow control
 IEEE Std 802.3z Gigabit Ethernet Standard
 IEEE802.1ax/IEEE802.3ad Link Aggregation
 IEEE 802.3ah Ethernet in the First Mile.
 IEEE 802.1ag Connectivity Fault Management
 IEEE 802.1ab Link Layer Discovery Protocol
 IEEE 802.1D Spanning Tree Protocol
 IEEE 802.1w Rapid Spanning Tree Protocol
 IEEE 802.1sMultiple Spanning Tree Protocol
 IEEE 802.1x Port based network access control protocol
 IEEE 802.3az Energy Efficient Ethernet
 IEEE 802.1AE MAC Security (MACsec)
ITU  ITU SG13 Y.17ethoam
 ITU SG13 QoS control Ethernet-Based IP Access
 ITU-T Y.1730 ETH OAM performance monitor
 ITU-T Y.1731 ETH OAM performance monitor
 ITU-T Y.1710 Requirements for OAM functionality for MPLS networks
 ITU-T Y.1711 Operation and maintenance mechanism for MPLS networks
 ITU-T Y.1720 Protection switching for MPLS networks
ISO  ISO 10589IS-IS Routing Protocol
MEF  MEF 2 Requirements and Framework for Ethernet Service Protection
 MEF 9 Abstract Test Suite for Ethernet Services at the UNI
 MEF 10.2 Ethernet Services Attributes Phase 2
 MEF 11 UNI Requirements and Framework
 MEF 13 UNI Type 1 Implementation Agreement
 MEF 15 Requirements for Management of Metro Ethernet Phase 1 Network Elements
 MEF 17 Service OAM Framework and Requirements
 MEF 20 UNI Type 2 Implementation Agreement
 MEF 23 Class of Service Phase 1 Implementation Agreement
 Xmodem XMODEM/YMODEM Protocol Reference

Ordering Information

Ordering information is subject to updates with product version upgrades. The ordering information provided in this manual is for
reference only. To obtain the latest ordering information, contact Huawei switch distributors or Huawei local office.

S7700 Series Smart Routing Switches 39

 Basic Configuration

LE0BN66EDC N66E DC Assembly Rack (Four 40A outputs, maximum 1600 W per output, 600X600X2200mm)

LE0BN66EAC N66E AC Assembly Rack (Eight 10A Outputs, maximum 1600 W per output, 600X600X2200mm)

LE2BN66EA000 N66E AC Assembly Rack (Four 16A Outputs, maximum 2500 W per output, 600X600X2200mm)

ES0B00770300 S7703 Assembly Chassis

ES0B00770600 S7706 Assembly Chassis

ES0B00771200 S7712 Assembly Chassis

ES1BS7703S01 S7703 Assembly Chassis-sustain FCC

ES0B017712P0 S7712 PoE Assembly Chassis

ES1BS7703SP0 S7703 PoE Assembly Chassis

ES1BS7706SP0 S7706 PoE Assembly Chassis

ES0E2FBX Wide Voltage Fan Box

ES1M00FBX001 Enhancement Wide Voltage 68 Fan Box

Monitoring Board

EH1D200CMU00 Centralized Monitoring Board

Main Control Unit

ES0D00MCUA00 S7703 Main Control Unit A

ES0D00SRUA00 S7706/S7712 Main Control Unit A

ES1D2SRUE000 S7706/S7712, Main Control Unit E

ES1D2SRUH000 S7706/S7712 Main Control Unit H

ES1D2SRUH002 S7706/S7712, Main Control Unit H (Support Secure Boot)

SRU Service Card

ES0D00FSUA00 Enhanced Flexible Service Unit

ES02VSTSA Cluster Switching System Service Unit

ES1D2VS04000 4-Port 10G Cluster Switching System Service Unit (SFP+)

LE0D00CKMA00 Clock Pinch Board-1588

Agile Card

ES1D2C04HX2S 4-Port 100GE QSFP28 Interface Card (X2S, QSFP28)

ES1D2C04HX2E 4-Port 100GE QSFP28 Interface Card (X2E, QSFP28)

ES1D2H02QX2S 2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ Interface Card (X2S, QSFP28)

S7700 Series Smart Routing Switches 40

 Agile Card

ES1D2H02QX2E 2-Port 100GE QSFP28 Interface and 2-Port 40GE QSFP+ Interface Card (X2E, QSFP28)

ES1D2X48SX2S 48-Port 10GE SFP+ Interface Card (X2S, SFP+)

ES1D2L08QX2E 8-Port 40GE QSFP+ Interface Card (X2E, QSFP+)

ES1D2X32SX2S 32-Port 10GE SFP+ Interface Card (X2S, SFP+)

ES1D2X32SX2E 32-Port 10GE SFP+ Interface Card (X2E, SFP+)

ES1D2S24SX2S 24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card (X2S, SFP+)

ES1D2S24SX2E 24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card (X2E, SFP+)

ES1D2S16SX2S 16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card (X2S, SFP+)

ES1D2S16SX2E 16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card (X2E, SFP+)

ES1D2G48TX1E 48-Port 10/100/1000BASE-T Interface Card (X1E, RJ45)

ES1D2G48SX1E 48-Port 100/1000BASE-X Interface Card (X1E, SFP)

ES1D2S04SX1E 4-Port 10GBASE-X and 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo
Interface Card (X1E, RJ45/SFP/SFP+)

ES1D2S08SX1E 8-Port 10GBASE-X and 8-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface
Card (X1E, RJ45/SFP/SFP+)

10/100/1000BASE-T Interface Card

ES0DG24TFA00 24-Port 10/100/1000BASE-T Interface Card (FA, RJ45)

ES0D0G48TA00 48-Port 10/100/1000BASE-T Interface Card (EA, RJ45)

ES0DG48TFA00 48-Port 10/100/1000BASE-T Interface Card (FA, RJ45)

ES0D0G48TC00 48-Port 10/100/1000BASE-T Interface Card (EC, RJ45)

ES0D0T24XA00 24-Port 10/100/1000BASE-T and 2-Port 10GBASE-X Interface Card (EA, RJ45/XFP)

100/1000BASE-X Interface Card

ES0D0G24SA00 24-Port 100/1000BASE-X Interface Card (SA, SFP)

ES0D0G24SC00 24-Port 100/1000BASE-X Interface Card (EC, SFP)

ES0D0G24CA00 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card (SA, SFP/RJ45)

ES0D0S24XA00 24-Port 100/1000BASE-X and 2-Port 10GBASE-X Interface Card (EA, SFP/XFP)

ES0D0G48SA00 48-Port 100/1000BASE-X Interface Card (EA, SFP)

ES0D0G48SC00 48-Port 100/1000BASE-X Interface Card (EC, SFP)

ES1D2G48SFA0 48-Port 100/1000BASE-X Interface Card (FA, SFP)

100/1000BASE-X Interface Card

ES0DG48CEAT0 36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card (EA, RJ45/SFP)

S7700 Series Smart Routing Switches 41

 10GBASE-X Interface Card

ES0D0X2UXA00 2-Port 10GBASE-X Interface Card (EA, XFP)

ES0D0X4UXA00 4-Port 10GBASE-X Interface Card (EA, XFP)

ES0D0X4UXC00 4-Port 10GBASE-X Interface Card (EC, XFP)

ES1D2X08SED4 8-Port 10GBASE-X Interface Card (ED, SFP+)

ES0D0X12SA00 12-Port 10GBASE-X Interface Card (SA, SFP+)

ES1D2X16SSC2 16-Port 10GBASE-X Interface Card (SC, SFP+)

ES1D2X32SSC0 32-Port 10GBASE-X Interface Card (SC, SFP+)

40GE BASE-X Interface Card

ES1D2L02QFC0 2-Port 40GBASE-X Interface Card (FC, QSFP+)

100GE BASE-X Interface Card

ES1D2C02FEE0 2-Port 100GBASE-X Interface Card (EE, CFP)

PoE Interface Card

ES0D0G48VA00 48-Port 10/100/1000BASE-T PoE Interface Card (EA, RJ45, PoE)

Service Processing Unit

ET1D2FW00S00 NGFW Module A, with HW General Security Platform Software

ET1D2FW00S01 NGFW Module B, with HW General Security Platform Software

ET1D2IPS0S00 IPS Module A, with HW General Security Platform Software

ACU2 WLAN ACU2 Access Controller Unit (128 AP Control Resource Included)

FE-SFP Optical Transceiver

S-SFP-FE-LH40- Optical Transceiver, eSFP, FE, Single-mode Module (1310 nm, 40 km, LC)
SM1310

S-SFP-FE-LH80- Optical Transceiver, eSFP, FE, Single-mode Module (1550 nm, 80 km, LC)
SM1550

SFP-FE-SX-MM1310 Optical Transceiver, SFP, 100M/155M, Multi-mode Module (1310 nm, 2 km, LC)

eSFP-FE-LX-SM1310 Optical Transceiver, eSFP, 100M/155M, Single-mode Module (1310 nm, 15 km, LC)

GE-SFP Module

S7700 Series Smart Routing Switches 42

 GE-SFP Module

SFP-1000BaseT Electrical transceiver-SFP-GE-Electrical Interface Module (100 m, RJ45)

eSFP-GE-SX-MM850 Optical Transceiver-eSFP-GE-Multi-mode Module (850 nm, 0.5 km, LC)

SFP-GE-LX-SM1310 Optical Transceiver-SFP-GE-Single-mode Module (1310 nm, 10 km, LC)

S-SFP-GE-LH40- Optical Transceiver, eSFP, GE, Single-mode Module (1310 nm, 40 km, LC)
SM1310

S-SFP-GE-LH40- Optical Transceiver-eSFP-GE-Single-mode Module (1550 nm, 40 km, LC)

SM1550

S-SFP-GE-LH80- Optical Transceiver-eSFP-GE-Single-mode Module (1550 nm, 80 km, LC)

SM1550

eSFP-GE-ZX100- Optical Transceiver-eSFP-GE-Single-mode Module (1550 nm, 100 km, LC)

SM1550

10GE-XFP Optical Transceiver

XFP-SX-MM850 Optical Transceiver-XFP-10G-Multi-mode Module (850 nm, 0.3 km, LC)

XFP-STM64-LX- Optical Transceiver-XFP-10G-Single-mode Module (1310 nm, 10 km, LC)

SM1310

XFP-STM64-LH40- Optical Transceiver-XFP-10G-Single-mode Module (1550 nm, 40 km, LC)

SM1550

XFP-STM64-SM1550- Optical Transceiver-XFP-10G-Single-mode Module (1550 nm, 80 km, LC)

80km

10GE-SFP+ Optical Transceiver

OMXD30000 Optical Transceiver-SFP+-10G-Multi-mode Module (850 nm, 0.3 km, LC)

SFP-10G-iLR Optical Transceiver, SFP+, 9.8G, Single-mode Module (1310 nm, 1.4 km, LC)

OSX010000 Optical Transceiver-SFP+-10G-Single-mode Module (1310 nm, 10 km, LC)

OSX040N01 Optical Transceiver-SFP+-10G-Single-mode Module (1550 nm, 40 km, LC)

OSXD22N00 Optical module, SFP+, 10G, Multi-mode module (1310 nm, 0.22 km, LC, LRM)

LE2MXSC80FF0 Optical Transceiver, SFP+, 10G, Single-mode Module (1550 nm, 80 km, LC)

SFP-10G-USR Optical Transceiver, SFP+, 10G, Multi-mode Module (850 nm, 0.1 km, LC)

SFP-10G-ZR Optical Transceiver, SFP+, 10G, Single-mode Module (1550 nm, 80 km, LC)

SFP-10G-BXU1 10GBase, BIDI Optical Transceiver, SFP, 10G, Single-mode Module (TX1270 nm/RX1330 nm, 10
km, LC)

SFP-10G-BXD1 10GBase, BIDI Optical Transceiver, SFP, 10G, Single-mode Module (TX1330 nm/RX1270 nm, 10
km, LC)

SFP-10G-BXU2 10GBase-BIDI Optical Transceiver, SFP, 10G, Single-mode Module (TX1330 nm/RX1270 nm, 20
km, LC)

SFP-10G-BXD2 10GBase-BIDI Optical Transceiver, SFP, 10G, Single-mode Module (TX1270 nm/RX1330 nm, 20
km, LC)

S7700 Series Smart Routing Switches 43

 10GE-SFP+ Optical Transceiver

SFP-10G-ER-SM1330- Optical Transceiver, SFP+, 10G, BIDI Single-mode Module (TX 1330 nm/RX 1270nm, 40 km, LC)
BIDI

SFP-10G-ER-SM1270- Optical Transceiver, SFP+, 10G, BIDI Single-mode Module (TX 1270 nm/RX 1330nm, 40 km, LC)
BIDI

SFP-10G-AOC3M AOC Optical Transceiver, SFP+, 850 nm, 1G–10G, 0.003 km

SFP-10G-AOC10M AOC Optical Transceiver, SFP+, 850 nm, 1G–10G, 0.01 km

QSFP-4SFP10- Optical transceiver, QSFP+, 40G, (850 nm, 10 m, AOC) (Connect to four SFP+ Optical
AOC10M Transceivers)

QSFP-H40G-AOC10M Optical transceiver, QSFP+, 40G (850 nm, 10 m, AOC)

SFP-10G-ZCW1571 Optical Transceiver, SFP+, 10G, Single-mode Module (CWDM, 1571 nm,70 km, LC)

SFP-10G-ZCW1591 Optical Transceiver, SFP+, 10G, Single-mode Module (CWDM, 1591 nm,70 km, LC)

SFP-10G-ZCW1611 Optical Transceiver, SFP+, 10G, Single-mode Module (CWDM, 1611 nm, 70 km, LC)

40GE-QSFP+ & CFP Optical Transceiver

QSFP-40G-LX4 40GBase-LX4 Optical Transceiver, QSFP+, 40GE, Single-mode (1310 nm, 2 km, LC), Multi-mode
(1310 nm, 0.15 km, LC)

QSFP-40G-iSM4 40GBase-iSM4 Optical Transceiver, QSFP+, 40G, Single-mode Module (1310 nm, 1.4 km, MPO)
(Connect to Four SFP+ Optical Transceivers)

QSFP-40G-eSM4 40GBase-eSM4 Optical Transceiver, QSFP+, 40G, Single-mode Module (1310nm,10km,MPO)

(Connect to four SFP+ Optical Transceiver)

QSFP-40G-iSR4 40GBase-SR4 Optical Transceiver, QSFP+, 40G, Multi-mode (850 nm, 0.15 km, MPO) (Connect to
Four SFP+ Optical Transceivers)

QSFP-40G-LR4 40GBase-LR4 Optical Transceiver, QSFP+, 40GE, Single-mode Module (1310 nm, 10 km, LC)

QSFP-40G-eSM4 40GBase-eSM4 Optical Transceiver, QSFP+, 40G, Single-mode Module (1310 nm, 10 km, MPO)
(Connect to four SFP+ Optical Transceivers)

QSFP-40G-eiSR4 40GBase-eSR4 Optical Transceiver, QSFP+, 40G, Multi-mode (850 nm, 0.3 km, MPO) (Connect to
Four SFP+ Optical Transceivers)

QSFP-40G-ER4 40GBase-ER4 Optical Transceiver, QSFP+, 40G, Single-mode Module (1310 nm, 40 km, LC)

CFP-40G-ZR4 High-Speed Transceiver, CFP, 40G, Single-mode Module (1550 nm Band, 41.25G, 80 km, Straight
LC)

CFP-40G-SR4 High-Speed Transceiver, CFP, 40G, Multi-mode Module (850 nm, 4*10G, 0.1 km, MPO)

CFP-40G-LR4 High-Speed Transceiver, CFP, 40G, Single-mode Module (1310 nm Band, 41.25G, 10 km, Straight
LC)

CFP-40G-ER4 High-Speed Transceiver, CFP, 40G, Single-mode Module (1310 nm Band, 41.25G, 40 km, Straight
LC)

CFP-40G-ZR4 High-Speed Transceiver, CFP, 40G, Single-mode Module (1550 nm Band, 41.25G, 80 km, Straight
LC)

100GE-CFP Optical Transceiver

S7700 Series Smart Routing Switches 44

 100GE-CFP Optical Transceiver

QSFP-100G-SR4 100GBase-SR4 Optical Transceiver, QSFP28, 100G, Multi-mode (850 nm, 0.1 km, MPO)

QSFP-100G-PSM4 100GBase-PSM4 Optical Transceiver, QSFP28, 100G, Single-mode Module (1310 nm, 0.5 km,
MPO)

QSFP-100G-CLR4 High-Speed Transceiver, QSFP28, 1310 nm, 4*25GBase, -6.5 dBm, 2.5 dBm, -10.7 dBm, LC/PC,
2 km

QSFP-100G-CWDM4 High-Speed Transceiver, QSFP28, 1310 nm, 4*25GBase, -6.5 dBm, 2.5 dBm, -9.8 dBm, LC/PC, 2
km

QSFP-100G-LR4 100GBase-LR4 Optical Transceiver, QSFP28, 100G, Single-mode Module (1310 nm, 10 km, LC)

CFP-100G-SR10 100GBase-SR4 Optical Transceiver, QSFP28, 100G, Multi-mode (850 nm, 0.1 km, MPO)

CFP-100G-LR4 High-Speed Transceiver, CFP, 100G, Single-mode Module (1310 nm Band, 4*25G, 10 km,
Straight LC)

CFP-100G-ER4 High-Speed Transceiver, CFP, 100G, Single-mode Module (1310 nm Band, 4*25G, 40 km,
Straight LC)

QSFP-100G-CU1M High-Speed Cable, 100G QSFP28 Passive High-Speed Cable, 1 m, QSFP28, CC8P0.254B (S),
QSFP28, ETH 100GbE

QSFP-100G-CU3M High-Speed Cable, 100G QSFP28 Passive High-Speed Cable, 3 m, QSFP28, CC8P0.254B (S),
QSFP28, ETH 100GbE

QSFP-100G-CU5M High-Speed Cable, 100G QSFP28 Passive High-Speed Cable, 5 m, QSFP28, CC8P0.4B (S),
QSFP28, ETH 100GbE

BIDI-SFP Optical Transceiver

SFP-FE-LX-SM1310- Optical Transceiver-eSFP-FE-BIDI Single-mode Module (TX1310 nm/RX1550 nm, 15 km, LC)
BIDI

SFP-FE-LX-SM1550- Optical Transceiver-eSFP-FE-BIDI Single-mode Module (TX1550 nm/RX1310 nm, 15 km, LC)
BIDI

SFP-GE-LX-SM1310- Optical Transceiver-eSFP-GE-BIDI Single-mode Module (TX1310 nm/RX1490 nm, 10 km, LC)
BIDI

SFP-GE-LX-SM1490- Optical Transceiver-eSFP-GE-BIDI Single-mode Module (TX1490 nm/RX1310 nm, 10 km, LC)
BIDI

SFP-GE-BXU1-SC 1000Base,BIDI Optical Transceiver, SFP, GE, Single-mode Module (TX1490 nm/RX1310 nm, 10
km, SC)

LE2MGSC40ED0 Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1490 nm/RX1310 nm, 40 km, LC)

LE2MGSC40DE0 Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310 nm/RX1490 nm, 40 km, LC)

SFP-GE-ZBXD1 Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1570 nm/RX1490 nm, 80 km, LC)

SFP-GE-ZBXU1 Optical Transceiver, eSFP, GE, BiDi Single-mode Module (TX1490 nm/RX1570 nm, 80 km, LC)

Power Module

ES02PSD16 1600 W DC Power Module (Black)

W2PSA0800 800 W AC Power Module (Black)

S7700 Series Smart Routing Switches 45

 Power Module

PAC-2200WF 2200 W AC Power Module

W2PSD2200 2200 W DC Power Module (Black)

LE0W01DPDB DC Power Distribution Unit (Four 40A outputs, maximum 1600 W per output, include power cable)
NOTE
The S7700 series switches use NEMA-compliant power cable.

IN6W18L10A AC Power Distribution Unit (Eight 10A outputs, maximum 1600 W per output, include power cable)
NOTE
The S7700 series switches use NEMA-compliant power cable.

IM1W24APD AC Power Distribution Unit (Four 16A outputs, maximum 2500 W per output, include power cable)
NOTE
The S7700 series switches use NEMA-compliant power cable.

Software

ES0SSVFF7700 SVF Function License (with S7700 used)

ES0SMPLS7700 MPLS Function License

ES0SNQAF7700 NQA Function License

ES0SIPV67700 IPV6 Function License

ES1SVXLAN000 VXLAN enhanced function license (used in S7700 series)

ES1SFIB128K0 X-series LPU FIB Resource License-128K

ES1SWL512AP0 WLAN Access Controller AP Resource License-512AP (with the X-series LPU used)

ES1SWL128AP0 WLAN Access Controller AP Resource License-128AP (with the X-series LPU used)

ES1SWL64AP00 WLAN Access Controller AP Resource License-64AP (with the X-series LPU used)

ES1SWL16AP00 WLAN Access Controller AP Resource License-16AP (with the X-series LPU used)

ES1SPPPoE4K0 PPPoE Access Subscriber Resource License-4K (with the X-series LPU used)

ES1SPPPoE8K0 PPPoE Access Subscriber Resource License-8K (with the X-series LPU used)

ES1SPPPoE16K PPPoE Access Subscriber Resource License-16K (with the X-series LPU used)

L-ACU2-128AP ACU2 Wireless Access Controller AP Resource License (128 AP)

More Information
For more information about Huawei Campus Switches, visit http://e.huawei.com or contact us in the following ways:

 Global service hotline: http://e.huawei.com/en/service-hotline

 Logging in to the Huawei Enterprise technical support website: http://support.huawei.com/enterprise/
 Sending an email to the customer service mailbox: [email protected]

S7700 Series Smart Routing Switches 46

Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
Huawei Technologies Co., Ltd.
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of
any kind, either express or implied. Address:Huawei Industrial Base Bantian,
Longgang Shenzhen 518129 People's
The information in this document is subject to change without notice. Every effort has been made in the
Republic of China
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Website:e.huawei.com

S7700 Series Smart Routing Switches 47