STANDARDS (ANSI/NETA-MTS 2007)

Thermography standard and level of acceptance is defined by ANSI/NETA-MTS 2007, this

Standard is global accepted.

Following are the acceptance/recommended actions given.

Priority wise Recommendations and actions :

[YOUR COMPANY ADRESS] | [YOUR COMPANY CONTACT DETAILS]

 SUMMARY REPORT FOR SHERATON LINK

Sr. Panel name dT Priority Page

No. Number

1 LVS4/BB/1 3.6 0
2 MCCP/LL2/1 8.1 0
3 MCCP/32/2 5.1 0
LVS-4 (SECTION-B)
4 MAIN INCOMER 5.1 0
5 CAPACITOR BANK 8.4 0
6 LVS4/BB/3 4.3 0
7 LVS4/BB/4 2.8 0
8 FIRE PUMP SET 8.4 0
9 MCCP/L32/3 5.3 0
10 BUS COUPLER 5.3 0
11 UPS-L-14 6.8 0
12 SB/00/L345 4.9 0
13 SB/LL1/L67 5.8 0
14 SB/LL3/L12 5.4 0
15 MCCP/32/E1 7.0 0
16 MCCP/14/E/3 6.0 0
17 SB/34/E/1 4.6 0
18 SB/14/EP 4.1 0
19 SB/04//EP 7.1 0
20 LIFT-8 7.8 0
21 LIFT-5 (MAIN INCOMER) 3.8 0
22 CAPACITOR BANK 4.0 0
23 SDB/L15/01 5.2 0
24 SDB/L16/01 3.0 0
2 CAPACITOR BANK 7.0 0
26 LVS5/BB/1 3.4 0
27 LVS5/BB/2 5.1 0
28 LVS-PARKING (PSB) 6.0 0
 29 DB-LL3/CP1 3.2 0
30 DB-LL1M-CP2 3.7 0
31 DB-LL1-CP1 6.5 0
32 DB-LL2-CP2 5.4 0
33 DB-LL2-LP3 9.5 0
34 DB-LL3-CP2 7.9 0
35 DB/LL1M/CP1 7.4 0
36 DB/LL1/CP2 5.5 0
37 DB/LL2/CP1 4.2 0
38 DR/00/P1 3.2 0
39 DB/01/P2 9.5 0
40 DB/00/VA 6.0 0
41 DR/LL1M/EX4 5.6 0
42 (FLOOR 30) SDB/30/01 5.7 0
43 (FLOOR-28) (SDB-28-01) 2.7 0
44 SDB/24/01 5.6 0
45 SDB/22/01 5.3 0
46 SDB/19/01 3.1 0
47 SDB/18/01 9.7 0
48 SDB/L15/01 2.5 0
49 SDB/15/EP 6.5 0
50 SDB/13/01 2.6 0
51 SDB/07/01 2.4 0
52 SDB/00/01 9.2 0
53 SB/01/LP 7.9 0
54 SB/01/AD 8.6 0
55 SB/01/BK 7.8 0
56 SB/00/JBK 9.6 0
57 SMDB-100/SR-2 3.8 0
58 SMDB-02-CM 4.1 0
59 SB/LL3/M1 4.5 0
60 SB/LL1/LP1 2.0 0
61 SB/LL1/L67 3.1 0
62
Equipment Name LVS4/BB/1 Date 22-12-2020
Operating Voltage 400V Load R-242.5A,Y-241.8A,B-
243.2A
Feeder OUTGOING Emissivity 0.95

FLIR1760.jpg | 22-Dec-20 | 8:43 AM

Measurements -
Spots
Bx1 Average 22.5 °C
Bx1 Maximum 25.2 °C
Bx1 Minimum 21.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name MCCP/LL2/1 Date 22-12-2020
Operating Voltage 400V Load R-10.11A,Y-8.86A,B-
12.42A
Feeder OUTGOING Emissivity 0.95

FLIR1761.jpg | 22-Dec-20 | 8:43 AM

Measurements -
Spots
Bx1 Average 22.4 °C
Bx1 Maximum 29.6 °C
Bx1 Minimum 21.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 8.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
 MCCP/32/2 Date 22-12-2020
Equipment Name LVS-4 (SECTION-B)
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1762.jpg | 22-Dec-20 | 8:43 AM

Measurements -
Spots
Bx1 Average 22.4 °C
Bx1 Maximum 25.0 °C
Bx1 Minimum 21.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name MAIN INCOMER Date 22-12-2020
Operating Voltage 400V Load R-223.5A,Y-212.4A,B-
197.0A
Feeder INCOMER Emissivity 0.95

FLIR1764.jpg | 22-Dec-20 | 8:45 AM

Measurements -
Spots
Bx1 Average 22.9 °C
Bx1 Maximum 26.5 °C
Bx1 Minimum 21.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name CAPACITOR BANK Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1765.jpg | 22-Dec-20 | 8:45 AM

Measurements -
Spots
Bx1 Average 23.1 °C
Bx1 Maximum 30.3 °C
Bx1 Minimum 22.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 8.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LVS4/BB/3 Date 22-12-2020
Operating Voltage 400V Load R- 54A,Y-42A,B-52A
Feeder OUTGOING Emissivity 0.95

FLIR1766.jpg | 22-Dec-20 | 8:45 AM

Measurements -
Spots
Bx1 Average 22.7 °C
Bx1 Maximum 25.5 °C
Bx1 Minimum 21.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.3 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LVS4/BB/4 Date 22-12-2020
Operating Voltage 400V Load R-64A,Y-52A,B-50A
Feeder OUTGOING Emissivity 0.95

FLIR1767.jpg | 22-Dec-20 | 8:46 AM

Measurements -
Spots
Bx1 Average 22.4 °C
Bx1 Maximum 23.3 °C
Bx1 Minimum 21.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name FIRE PUMP SET Date 22-12-2020
Operating Voltage 400V Load R-0.9A,Y-0.10A,B-
0.40A
Feeder OUTGOING Emissivity 0.95

FLIR1768.jpg | 22-Dec-20 | 8:46 AM

Measurements -
Spots
Bx1 Average 22.5 °C
Bx1 Maximum 29.0 °C
Bx1 Minimum 21.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 8.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name MCCP/L32/3 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1769.jpg | 22-Dec-20 | 8:46 AM

Measurements -
Spots
Bx1 Average 22.3 °C
Bx1 Maximum 25.3 °C
Bx1 Minimum 21.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.3 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name BUS COUPLER Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1771.jpg | 22-Dec-20 | 8:47 AM

Measurements -
Spots
Bx1 Average 22.7 °C
Bx1 Maximum 26.1 °C
Bx1 Minimum 21.5 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.3 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name UPS-L-14 Date 22-12-2020
Operating Voltage 400V Load R-22.5A,Y-22.10A,B-
22.12A
Feeder OUTGOING Emissivity 0.95

FLIR1772.jpg | 22-Dec-20 | 8:47 AM

Measurements -
Spots
Bx1 Average 22.0 °C
Bx1 Maximum 27.8 °C
Bx1 Minimum 21.4 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/00/L345 Date 22-12-2020
Operating Voltage 400V Load R-6.5A,Y-0.74A,B-6.4A
Feeder OUTGOING Emissivity 0.95

FLIR1773.jpg | 22-Dec-20 | 8:47 AM

Measurements -
Spots
Bx1 Average 21.6 °C
Bx1 Maximum 24.1 °C
Bx1 Minimum 21.1 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.9 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/LL1/L67 Date 22-12-2020
Operating Voltage 400V Load R-4.68A,Y-2.75A,B-
7.55A
Feeder OUTGOING Emissivity 0.95

FLIR1774.jpg | 22-Dec-20 | 8:48 AM

Measurements -
Spots
Bx1 Average 21.4 °C
Bx1 Maximum 24.7 °C
Bx1 Minimum 20.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/LL3/L12 Date 22-12-2020
Operating Voltage 400V Load R-50A,Y-44A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1775.jpg | 22-Dec-20 | 8:48 AM

Measurements -
Spots
Bx1 Average 21.7 °C
Bx1 Maximum 24.6 °C
Bx1 Minimum 20.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name MCCP/32/E1 Date 22-12-2020
Operating Voltage 400V Load R-5.12A,Y-24.67A,B-
0.67A
Feeder OUTGOING Emissivity 0.95

FLIR1776.jpg | 22-Dec-20 | 8:48 AM

Measurements -
Spots
Bx1 Average 21.8 °C
Bx1 Maximum 26.4 °C
Bx1 Minimum 21.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name MCCP/14/E/3 Date 22-12-2020
Operating Voltage 400V Load R-2.4A,Y-2.59A,B-
2.63A
Feeder OUTGOING Emissivity 0.95

FLIR1777.jpg | 22-Dec-20 | 8:48 AM

Measurements -
Spots
Bx1 Average 21.3 °C
Bx1 Maximum 25.1 °C
Bx1 Minimum 20.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/34/E/1 Date 22-12-2020
Operating Voltage 400V Load R-1.6A,Y-1.4A,B-1.7A
Feeder OUTGOING Emissivity 0.95

FLIR1778.jpg | 22-Dec-20 | 8:49 AM

Measurements -
Spots
Bx1 Average 21.7 °C
Bx1 Maximum 24.0 °C
Bx1 Minimum 20.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/14/EP Date 22-12-2020
Operating Voltage 400V Load R-2.60A,Y-7.17A,B-
6.60A
Feeder OUTGOING Emissivity 0.95

FLIR1779.jpg | 22-Dec-20 | 8:49 AM

Measurements -
Spots
Bx1 Average 21.3 °C
Bx1 Maximum 22.7 °C
Bx1 Minimum 20.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/04//EP Date 22-12-2020
Operating Voltage 400V Load R-0.6A,Y-1.32A,B-
0.54A
Feeder OUTGOING Emissivity 0.95

FLIR1780.jpg | 22-Dec-20 | 8:49 AM

Measurements -
Spots
Bx1 Average 20.9 °C
Bx1 Maximum 25.5 °C
Bx1 Minimum 20.4 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LIFT-8 Date 22-12-2020
Operating Voltage 400V Load R-30.12A,Y-11.5A,B-
5.42A
Feeder OUTGOING Emissivity 0.95

FLIR1781.jpg | 22-Dec-20 | 8:49 AM

Measurements -
Spots
Bx1 Average 21.1 °C
Bx1 Maximum 26.4 °C
Bx1 Minimum 20.5 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
 LIFT-5 Date 22-12-2020
Equipment Name MAIN INCOMER
Operating Voltage 400V Load R-138.4A,Y-168A,B-
112.4A
Feeder INCOMER Emissivity 0.95

FLIR1782.jpg | 22-Dec-20 | 9:27 AM

Measurements -
Spots
Bx1 Average 21.2 °C
Bx1 Maximum 23.2 °C
Bx1 Minimum 20.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name CAPACITOR BANK Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1783.jpg | 22-Dec-20 | 9:28 AM

Measurements -
Spots
Bx1 Average 21.3 °C
Bx1 Maximum 23.0 °C
Bx1 Minimum 20.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/L15/01 Date 22-12-2020
Operating Voltage 400V Load R-4.78A,Y-3.83A,B-
4.02A
Feeder OUTGOING Emissivity 0.95

FLIR1784.jpg | 22-Dec-20 | 9:28 AM

Measurements -
Spots
Bx1 Average 21.1 °C
Bx1 Maximum 24.0 °C
Bx1 Minimum 20.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.2 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/L16/01 Date 22-12-2020
Operating Voltage 400V Load R-6.04A,Y-9.42A,B-
2.06A
Feeder OUTGOING Emissivity 0.95

FLIR1785.jpg | 22-Dec-20 | 9:28 AM

Measurements -
Spots
Bx1 Average 21.5 °C
Bx1 Maximum 22.1 °C
Bx1 Minimum 21.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name CAPACITOR BANK Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1786.jpg | 22-Dec-20 | 9:28 AM

Measurements -
Spots
Bx1 Average 21.6 °C
Bx1 Maximum 26.6 °C
Bx1 Minimum 20.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LVS5/BB/1 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1787.jpg | 22-Dec-20 | 9:28 AM

Measurements -
Spots
Bx1 Average 21.6 °C
Bx1 Maximum 23.0 °C
Bx1 Minimum 21.1 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LVS5/BB/2 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1788.jpg | 22-Dec-20 | 9:30 AM

Measurements -
Spots
Bx1 Average 20.6 °C
Bx1 Maximum 23.3 °C
Bx1 Minimum 20.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name LVS-PARKING (PSB) Date 22-12-2020
Operating Voltage 400V Load R-40.8A,Y-50.5A,B-
50.6A
Feeder OUTGOING Emissivity 0.95

FLIR1789.jpg | 22-Dec-20 | 10:33 AM

Measurements -
Spots
Bx1 Average 22.8 °C
Bx1 Maximum 27.6 °C
Bx1 Minimum 22.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL3/CP1 Date 22-12-2020
Operating Voltage 400V Load R-5.1A,Y-2.7A,B-2.7A
Feeder OUTGOING Emissivity 0.95

FLIR1790.jpg | 22-Dec-20 | 10:34 AM

Measurements -
Spots
Bx1 Average 23.6 °C
Bx1 Maximum 24.5 °C
Bx1 Minimum 23.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.2 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL1M-CP2 Date 22-12-2020
Operating Voltage 400V Load R-3.84A,Y-10.32A,B-
5.85A
Feeder OUTGOING Emissivity 0.95

FLIR1791.jpg | 22-Dec-20 | 10:34 AM

Measurements -
Spots
Bx1 Average 23.4 °C
Bx1 Maximum 24.8 °C
Bx1 Minimum 22.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.7 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL1-CP1 Date 22-12-2020
Operating Voltage 400V Load R-5.6A,Y-7.2A,B-9.9A
Feeder OUTGOING Emissivity 0.95

FLIR1792.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.9 °C
Bx1 Maximum 27.0 °C
Bx1 Minimum 22.1 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL2-CP2 Date 22-12-2020
Operating Voltage 400V Load R-4.5A,Y-2.7A,B-5.8A
Feeder OUTGOING Emissivity 0.95

FLIR1793.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.4 °C
Bx1 Maximum 25.6 °C
Bx1 Minimum 21.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL2-LP3 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-8.6A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1794.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.4 °C
Bx1 Maximum 32.5 °C
Bx1 Minimum 21.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 9.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB-LL3-CP2 Date 22-12-2020
Operating Voltage 400V Load R-5.16A,Y-4.68A,B-
5.61A
Feeder OUTGOING Emissivity 0.95

FLIR1795.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 23.2 °C
Bx1 Maximum 28.7 °C
Bx1 Minimum 22.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.9 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB/LL1M/CP1 Date 22-12-2020
Operating Voltage 400V Load R-10.37A,Y-6.23A,B-
2.88A
Feeder OUTGOING Emissivity 0.95

FLIR1796.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 23.1 °C
Bx1 Maximum 28.3 °C
Bx1 Minimum 22.2 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB/LL1/CP2 Date 22-12-2020
Operating Voltage 400V Load R-2.8A,Y-8.2A,B-
4.28A
Feeder OUTGOING Emissivity 0.95

FLIR1797.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.7 °C
Bx1 Maximum 25.9 °C
Bx1 Minimum 22.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB/LL2/CP1 Date 22-12-2020
Operating Voltage 400V Load R-2.32A,Y-3.5A,B-4.3A
Feeder OUTGOING Emissivity 0.95

FLIR1798.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.3 °C
Bx1 Maximum 24.1 °C
Bx1 Minimum 21.5 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.2 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DR/00/P1 Date 22-12-2020
Operating Voltage 400V Load R-0.10A,Y-11.8A,B-
12.5A
Feeder OUTGOING Emissivity 0.95

FLIR1799.jpg | 22-Dec-20 | 10:35 AM

Measurements -
Spots
Bx1 Average 22.7 °C
Bx1 Maximum 23.3 °C
Bx1 Minimum 22.2 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.2 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB/01/P2 Date 22-12-2020
Operating Voltage 400V Load R-0.82A,Y-0.99A,B-
1.2A
Feeder OUTGOING Emissivity 0.95

FLIR1800.jpg | 22-Dec-20 | 10:36 AM

Measurements -
Spots
Bx1 Average 22.5 °C
Bx1 Maximum 33.5 °C
Bx1 Minimum 21.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 9.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DB/00/VA Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1801.jpg | 22-Dec-20 | 10:36 AM

Measurements -
Spots
Bx1 Average 22.3 °C
Bx1 Maximum 27.3 °C
Bx1 Minimum 21.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name DR/LL1M/EX4 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1802.jpg | 22-Dec-20 | 10:36 AM

Measurements -
Spots
Bx1 Average 22.3 °C
Bx1 Maximum 25.7 °C
Bx1 Minimum 21.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
 (FLOOR 30) Date 22-12-2020
Equipment Name SDB/30/01
Operating Voltage 400V Load R-35A,Y-10.2A,B-
18.5A
Feeder OUTGOING Emissivity 0.95

FLIR1803.jpg | 22-Dec-20 | 12:19 PM

Measurements -
Spots
Bx1 Average 26.1 °C
Bx1 Maximum 30.9 °C
Bx1 Minimum 24.7 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.7 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
 (FLOOR-28) Date 22-12-2020
Equipment Name (SDB-28-01)
Operating Voltage 400V Load R-24A,Y-2.6A,B-8.6A
Feeder OUTGOING Emissivity 0.95

FLIR1804.jpg | 22-Dec-20 | 12:23 PM

Measurements -
Spots
Bx1 Average 28.1 °C
Bx1 Maximum 28.6 °C
Bx1 Minimum 27.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/24/01 Date 22-12-2020
Operating Voltage 400V Load R-11A,Y-7.5A,B-7.8A
Feeder OUTGOING Emissivity 0.95

FLIR1805.jpg | 22-Dec-20 | 12:29 PM

Measurements -
Spots
Bx1 Average 26.1 °C
Bx1 Maximum 30.8 °C
Bx1 Minimum 25.4 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/22/01 Date 22-12-2020
Operating Voltage 400V Load R-3.9A,Y-5.7A,B-5.5A
Feeder OUTGOING Emissivity 0.95

FLIR1806.jpg | 22-Dec-20 | 12:34 PM

Measurements -
Spots
Bx1 Average 27.4 °C
Bx1 Maximum 31.5 °C
Bx1 Minimum 25.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 5.3 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/19/01 Date 22-12-2020
Operating Voltage 400V Load R-3.9A,Y-5.5A,B-4.7A
Feeder OUTGOING Emissivity 0.95

FLIR1807.jpg | 22-Dec-20 | 12:44 PM

Measurements -
Spots
Bx1 Average 29.8 °C
Bx1 Maximum 32.1 °C
Bx1 Minimum 28.9 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/18/01 Date 22-12-2020
Operating Voltage 400V Load R-11.2A,Y-5.5A,B-4.2A
Feeder OUTGOING Emissivity 0.95

FLIR1808.jpg | 22-Dec-20 | 12:48 PM

Measurements -
Spots
Bx1 Average 25.5 °C
Bx1 Maximum 33.7 °C
Bx1 Minimum 23.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 9.7 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/L15/01 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1809.jpg | 22-Dec-20 | 12:54 PM

Measurements -
Spots
Bx1 Average 28.7 °C
Bx1 Maximum 29.2 °C
Bx1 Minimum 28.3 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/15/EP Date 22-12-2020
Operating Voltage 400V Load R-17A,Y-27A,B-24A
Feeder OUTGOING Emissivity 0.95

FLIR1810.jpg | 22-Dec-20 | 12:57 PM

Measurements -
Spots
Bx1 Average 21.0 °C
Bx1 Maximum 25.1 °C
Bx1 Minimum 20.3 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 6.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/13/01 Date 22-12-2020
Operating Voltage 400V Load R-10.9A,Y-9.5A,B-
11.5A
Feeder OUTGOING Emissivity 0.95

FLIR1811.jpg | 22-Dec-20 | 12:59 PM

Measurements -
Spots
Bx1 Average 23.4 °C
Bx1 Maximum 23.9 °C
Bx1 Minimum 22.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/07/01 Date 22-12-2020
Operating Voltage 400V Load R-9.5A,Y-14.9A,B-
12.4A
Feeder OUTGOING Emissivity 0.95

FLIR1812.jpg | 22-Dec-20 | 1:03 PM

Measurements -
Spots
Bx1 Average 26.3 °C
Bx1 Maximum 26.9 °C
Bx1 Minimum 25.8 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.4 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SDB/00/01 Date 22-12-2020
Operating Voltage 400V Load R-0A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1814.jpg | 22-Dec-20 | 1:15 PM

Measurements -
Spots
Bx1 Average 28.1 °C
Bx1 Maximum 35.1 °C
Bx1 Minimum 26.2 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 9.2 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/01/LP Date 22-12-2020
Operating Voltage 400V Load R-11A,Y-12A,B-11A
Feeder OUTGOING Emissivity 0.95

FLIR1815.jpg | 22-Dec-20 | 1:15 PM

Measurements -
Spots
Bx1 Average 28.1 °C
Bx1 Maximum 34.3 °C
Bx1 Minimum 26.5 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.9 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/01/AD Date 22-12-2020
Operating Voltage 400V Load R-13.2A,Y-22.8A,B-
23A
Feeder OUTGOING Emissivity 0.95

FLIR1816.jpg | 22-Dec-20 | 1:15 PM

Measurements -
Spots
Bx1 Average 28.5 °C
Bx1 Maximum 35.1 °C
Bx1 Minimum 26.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 8.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/01/BK Date 22-12-2020
Operating Voltage 400V Load R-0.2A,Y-0A,B-0A
Feeder OUTGOING Emissivity 0.95

FLIR1817.jpg | 22-Dec-20 | 1:19 PM

Measurements -
Spots
Bx1 Average 22.6 °C
Bx1 Maximum 28.9 °C
Bx1 Minimum 22.0 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 7.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/00/JBK Date 22-12-2020
Operating Voltage 400V Load R-8.7A,Y-1.5A,B-0.5A
Feeder OUTGOING Emissivity 0.95

FLIR1818.jpg | 22-Dec-20 | 1:23 PM

Measurements -
Spots
Bx1 Average 20.8 °C
Bx1 Maximum 28.7 °C
Bx1 Minimum 19.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 9.6 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SMDB-100/SR-2 Date 22-12-2020
Operating Voltage 400V Load R-23A,Y-20A,B-19A
Feeder OUTGOING Emissivity 0.95

FLIR1819.jpg | 22-Dec-20 | 1:34 PM

Measurements -
Spots
Bx1 Average 25.1 °C
Bx1 Maximum 27.3 °C
Bx1 Minimum 24.1 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.8 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SMDB-02-CM Date 22-12-2020
Operating Voltage 400V Load R-76A,Y-54A,B-51A
Feeder OUTGOING Emissivity 0.95

FLIR1820.jpg | 22-Dec-20 | 1:34 PM

Measurements -
Spots
Bx1 Average 24.4 °C
Bx1 Maximum 26.9 °C
Bx1 Minimum 23.0 °C
Ellipses -
Lines -
Dt1 (Ref.temp - Bx1.Max) 4.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/LL3/M1 Date 22-12-2020
Operating Voltage 400V Load R-0.14A,Y-0.15A,B-
0.22A
Feeder OUTGOING Emissivity 0.95

FLIR1821.jpg | 22-Dec-20 | 1:42 PM

Measurements -
Spots
Bx1 Average 24.5 °C
Bx1 Maximum 28.1 °C
Bx1 Minimum 23.6 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 4.5 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/LL1/LP1 Date 22-12-2020
Operating Voltage 400V Load R-26A,Y-32A,B-50A
Feeder OUTGOING Emissivity 0.95

FLIR1822.jpg | 22-Dec-20 | 1:49 PM

Measurements -
Spots
Bx1 Average 26.9 °C
Bx1 Maximum 27.9 °C
Bx1 Minimum 26.4 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 2.0 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits
Equipment Name SB/LL1/L67 Date 22-12-2020
Operating Voltage 400V Load R-3.5A,Y-2.4A,B-5.4A
Feeder OUTGOING Emissivity 0.95

FLIR1823.jpg | 22-Dec-20 | 1:52 PM

Measurements -
Spots
Bx1 Average 20.1 °C
Bx1 Maximum 20.6 °C
Bx1 Minimum 19.5 °C
Ellipses -
Lines -
Dt1 (Bx1.Max - Ref.temp) 3.1 °C
- -

Parameters
Emissivity 0.95
Reflected temperature 20.0 °C
Distance 1.0 m
Atmospheric temperature 20.0 °C
Relative humidity 50%
External optics temperature 20.0 °C
External optics transmission 1.00
Sl.No Analysis and Observation Recommendations

Thermal imaging was taken on Cable

1
Termination on incomer Cleaning and inspection are required to keep
the component in 0 Priority.
2 Temperature difference are in safe limits