Scribd
Upload
105 views1 page

Halene - P: Technical Data Sheet B202S

This technical data sheet provides information on B202S, a polypropylene random copolymer produced using Spheripol technology. B202S has exceptional processability with excellent melt strength, clarity, and gloss. It is suitable for blow molding, extrusion, and food contact packaging including medical fluid bottles. Key properties include a melt flow index of 1.9 g/10 min, density of 0.90 g/cm3, tensile strength of 26 MPa, and Vicat softening point of 130°C. Typical processing temperatures are 160-210°C for the barrel and 190-210°C for the die.

Uploaded by

Dharmendrasinh Zala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
105 views1 page

Halene - P: Technical Data Sheet B202S

This technical data sheet provides information on B202S, a polypropylene random copolymer produced using Spheripol technology. B202S has exceptional processability with excellent melt strength, clarity, and gloss. It is suitable for blow molding, extrusion, and food contact packaging including medical fluid bottles. Key properties include a melt flow index of 1.9 g/10 min, density of 0.90 g/cm3, tensile strength of 26 MPa, and Vicat softening point of 130°C. Typical processing temperatures are 160-210°C for the barrel and 190-210°C for the die.

Uploaded by

Dharmendrasinh Zala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

H A L D I A

PETROCHEMICALS LTD Halene – P


TECHNICAL DATA SHEET B202S Polypropylene Random Copolymer

Characteristics
B202S is a Polypropylene Random Copolymer, produced by the latest generation Spheripol
Technology. This is primarily suitable for Blow Molding & Extrusion process.
B 202S combines exceptional processability with excellent Melt Strength, High Clarity and
Gloss.
Product produced from B 202S is suitable for Food Contact and for packaging / bottling Medical
Fluids like IV fluid etc.

Application
• Bottles & Containers for Medical Application & Transparent Products (e.g. IV Fluid Bottles) etc.

Property Test Method Unit Value


0
Melt Flow Index (2.16 kg & 230 C) ASTM D 1238 g/10 min 1.9
3
Density at 23°C ASTM D 1505 g/cm 0.90
Tensile Strength at Yield ASTM D 638 * MPa 26
Tensile Elongation at Yield (Type I - with Extensometer) % 11
Flexural Modulus ASTM D 790 MPa 850
Izod Impact Strength ( Notch, 23°C) ASTM D 256 J/m 110
0
Vicat Softening Point (10N) ASTM D 1525 C 130
2 0
Heat Deflection Temperature (0.46 N/m ) ASTM D 648 C 68

Typical Processing Temperature


0
Barrel Temperature C 160 - 210
0
Die Temperature C 190 - 210

* Mechanical properties tested on Injection Molded Test Specimens (Type I)

The above typical properties are not to be construed as Specifications and may change without any prior notice. The User will
solely be responsible for any intended process / product usage and HPL does not guarantee or undertake any responsibility for
any consequential damage or loss based on the information given above.

CS/PP/TDS/Revision003/June’05

You might also like