#1887
Union TD-120 Sour,
125HP Triplex Pump
Package
FOR IMMEDIATE SALE
Up to 560m3/day or up to 3748psi discharge pressure – this full sour water injection / disposal package is
sitting right now in Three Hills, AB and can go to work immediately after installing your choice of
plungers! The Union TD-120 Pump is the only part that is in a reconditioned state, everything else is in
unused/new condition. Fortunately, we did the pump work ourselves, so we offer a full 1 year warranty on it –
the same that you would get if you bought a NEW pump from Union or National.
There is one 3 bag filter (coated) included, but we have the room, spool pieces, and extra identical filter to
install a second one if you require. As mentioned, this a sour unit; coated pipe, no TOL's, linebacker gaskets,
sour valves etc. A full drawing and QA package included. With this pump package you are getting
everything you love about new, combined with a price that you can brag about. Requires only electrical
wiring to JB’s and it is ready to go!
FOR IMMEDIATE SALE
#1887
Union TD-120, 1500#, Sour, 125 HP Triplex Pump Package
Condition New / Never Used
Location Three Hills, AB
Availability Immediate
Warranty NEW – 12 Months
Driven Model Union TD-120 (M)
Pump Driver WEG 125HP Electric Motor, VFD Rated
Charge Pump Grundfos CRN 20-3 c/w 7.5HP WEG Motor
Filter 3 Bag (coated) w/ Bypass
Piping 3” 150# Suction; 2” 1500# Discharge, Internally Coated, 2” Turbine Flow Meter
12’ x 18’ x 9’ Gable Style, Ridge Vent, Ice Rakes, 2” Drip Lip, Drain Sump, Insulated
Building
Skid, etc.
Client choice of plungers included in price. PSV and heater not shown, but are
Of Note
included in the offering. Full drawing and QA Package is Included
Take a 3D walkthrough at https://bit.ly/2CWpmvW
Pump & Accessories
MAIN PUMP, MOTOR AND EQUIPMENT
P-200 Triplex Pump:
• One (1) REMANUFACTURED UNION TD-120 • Sheave Kit and Belt Guard
Pump “M” Fluid End • Mounted on sub assembly skid and attached to
• Client choice of plungers main skid
• 3” Suction, 2” Discharge Connections • Zero-Hour Overhaul c/w 12 month warranty
• 3 Feed Lubricator w/ Oil Reservoir
M-200 Motor P-100 Charge Pump:
• One (1) NEW 125HP Electric Motor • One (1) NEW Grundfos CRN 20-3 Centrifugal Pump
• WEG • All Wetted Parts Stainless Steel
• TEFC, Roller brg. drive end • Rated at 120 gpm @ 65 psi
• 1800 RPM • Low NPSH Impeller rated at <5ft npshr
• VFD Rated
• 460V/3/60 M-100 Charge Pump Motor:
• One (1) 7.5 HP WEG Motor
PD-100 Suction Stabilizer:
• TEFC, 3550 RPM
• One (1) Status Flow or equal Pulsation Stabilizers • 460V/3/60Hz
• 300 cu/in
• 3” 150# RF F-100 Filter Vessel:
• CRN for BC, SK, AB, MB
• New P2 3 Bag Filter Vessel
• Internally Coated
PD-200 Discharge Stabilizer:
• MAWP 150 PSI @ +300F/-20F
• One (1) CoorsTek or equal Discharge Pulsation • 4” 150# RF in/out Connections
Stabilizer • Rated for 815m3/day
• 300 cu/in • AB/BC/SK CRN Registration
• 2” 1500# RF • Piping connections for 2nd filter
• CRN for BC, SK, AB, MB • 2nd 3 bag filter currently in stock
Pump & Accessories
100 RPM 200 RPM 250 RPM 300 RPM 350 RPM 400 RPM
Model Plunger Gal/Rev Max PSI Max kPa m³/d GPM m³/d GPM m³/d GPM m³/d GPM m³/d GPM m³/d GPM
1.0'' 0.04335 10000 68948 22.4 4.12 44.9 8.24 56.1 10.3 67.3 12.4 78.6 14.4 89.8 16.5
Union
1.25'' 0.06773 8149 56184 35.1 6.43 70.2 12.9 87.7 16.1 105 19.3 123 22.5 140 25.7
TD-120 H
1.5'' 0.09754 5659 39016 50.5 9.27 101 18.5 126 23.2 152 27.8 177 32.4 202 37.1
1.75'' 0.13276 4000 27579 68.7 12.6 137 25.2 172 31.5 206 37.8 241 44.1 275 50.4
Union 2.0'' 0.1734 3183 21947 89.8 16.5 180 32.9 224 41.2 269 49.4 314 57.7 359 65.9
TD-120 M 2.25'' 0.21946 2515 17341 114 20.8 227 41.7 284 52.1 341 62.5 398 73 455 83.4
2.5'' 0.27094 2037 14046 140 25.7 281 51.5 351 64.3 421 77.2 491 90.1 561 103
2.75'' 0.32783 1600 11032 170 31.1 340 62.3 424 77.9 509 93.4 594 109 679 125
3.0'' 0.39015 1415 9754 202 37.1 404 74.1 505 92.7 606 111 707 130 808 148
Union 3.25'' 0.45788 1205 8311 237 43.5 474 87 593 109 711 130 830 152 948 174
TD-120 L 3.5'' 0.53104 1039 7166 275 50.4 550 101 687 126 825 151 962 177 1100 202
3.75'' 0.60961 905 6243 316 57.9 631 116 789 145 947 174 1105 203 1263 232
4.0'' 0.6936 796 5487 359 65.9 718 132 898 165 1078 198 1257 231 1437 264
Brake HP Required 34 68 85 102 119 136
“L” Fluid End is Available (stock) for higher volume/lower pressure applications
Pump & Accessories
INSTRUMENTATION
PI-100 P-100 Inlet pressure indicator (0-15 psi)
DPI-100 F-100/200 Differential Pressure Indicator (0-30 Diff Pres)
PI-200/300 P-100 Discharge pressure Indicator (0-160 psi)
PSL-100 P-200 Low suction pressure Shutdown Switch Low (6900GZE14 SET FALLING TO 25 PSI)
PI-200 P-200 discharge pressure Indicator (0-3000 PSI)
PSH-200 P-200 High discharge pressure Shutdown Switch High (6900GZE22 SET TBA)
PSV-200 Pressure Safety Valve (SET RISING TO TBA)
FT-200 1 ½ x 2 EZ-IN (2” 1500# RF) Turbine Flow Meter
FQI-200 Flow Totalizer MCIII EX
VSH-200 P-161 High Vibration Switch
LSL-200 P-161 Low Oil Level Shutdown
PIPING
All Pipe included in this package is Internally Coated with Devoe 253
Suction Piping: 3” 150# Drain Piping to be 1” and will drain into open
drain sump from:
• Includes 3” Basket strainer and Isolation valve on
suction piping • Basket strainer drain
• 3” Filter vessel isolation valves and 3” bypass • F-161 Filter vessel drain
• Suction piping between P-100/P-200
valve circuit
• Discharge piping
Discharge Piping: 2” 900/1500# • P-200 stuffing box drain
• Manual startup bypass valve
• Isolation valve
• Check valve
• PSV and startup bypass valves outlet go back to
main pump suction
• Drain valves to drain sump
Pump & Accessories
PIPING NOTES:
• Built to ASME B31.3 Latest Edition • Piping includes flanges for all instrumentation
• Discharge piping (900/1500#) to be sch. 160 connections (No TOL’s)
• Suction (150# ANSI) piping to be sch. 40 • All pipe/fittings/bolting/ linebacker gaskets
• All Piping 10% NDT, no PWHT materials to be standard
• Internally coated
SKID & BUILDING
One (1) Surplus Never Used Skid and Building:
• 12’ W x 18’L x 9’ H Gable S • Ridge Vent
• Checker Plate Flooring • Choice of 12VDC start Catadyne heater OR 15Kw
• 2” Drip Lip Around Skid Electric Hazloc Heater
• Drain Sump • Eavestroughs and Downspouts
• High Level Sump Switch • One (1) Double Man Door
• Filter, Suction and discharge piping, pump • One (1) Single Man Door
stuffing box area drain into sump • 3” Fire Retardant Spray Foam Under skid
• Gable Style Building Insulation Insulated Skid
• Ice Rakes • There is no electrical included in this quote.
QA/QC DOCUMENTATION
Operation, Parts, Service and QA Manual provided with package c/w:
• Drawings include: • Parts and service Manual for all equipment
• P&ID • Data sheets for all equipment in package
• GA Plan Elevation ISO • QC Manual from approved shop with ABSA - AQP
• Structural Steel • AB-83
• Pump Curves • U1A for Filter vessel and Pulsation stabilizers
• Installation and Operation manual
Take a 3D walkthrough at https://bit.ly/2rmbK7N
