Scribd
Upload
33 views

Technical Note # 63: GE PMCS Tech Note 63 Page 1 of 2

This document provides instructions for configuring the PMCS 6.0 Waveform Server to retrieve demand reports from a DFP200 device. It explains that after installing PMCS 6.0 and configuring a DFP200 device, the Waveform Server configuration file (WFServer.ini) must be edited to change the ReportPeriod and StartTime parameters. Adjusting these parameters determines how often and when the Waveform Server retrieves demand data reports from the DFP200.

Uploaded by

hassan karimi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

Technical Note # 63: GE PMCS Tech Note 63 Page 1 of 2

This document provides instructions for configuring the PMCS 6.0 Waveform Server to retrieve demand reports from a DFP200 device. It explains that after installing PMCS 6.0 and configuring a DFP200 device, the Waveform Server configuration file (WFServer.ini) must be edited to change the ReportPeriod and StartTime parameters. Adjusting these parameters determines how often and when the Waveform Server retrieves demand data reports from the DFP200.

Uploaded by

hassan karimi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GE PMCS Tech Note 63 Page 1 of 2

Technical Note # 63

Retrieving DFP200 Demand Reports

Home Subject: The PMCS 6.0 Waveform Server can be configured to retrieve demand
reports from a DFP200 device. Configuration is done by manually editing two
Product parameters in the Wfserver.ini file.
Information
Applies To: PMCS 6.0 Waveform Server. Note does not apply to earlier PMCS
Case Studies releases.

FAQs Configuring the Waveform Server for DFP200 Demand Reports:

Download Area Following installation of PMCS 6.0, start the PMCS 6.0 DDE Server
and configure a DFP200 device.
'Virtual' Demo
Execute the PMCS 6.0 Waveform Server. The Waveform Server will
make entries in the WFServer.ini file for the DFP200.
Glossary of
Terms
Stop the Waveform Server application and Exit.
Links
Open the WFServer.ini file using a text editor such as Notepad or
WordPad. The Wfserver.ini file is located in the same directory as
Contact Us
the Waveform Server executable (Wfserver.exe).

Search
Locate the entry in the WFServer.ini file [DFP200DemandData].

There are two values which can be configured: ReportPeriod and


StartTime.

The default value for ReportPeriod is 00:00:00. The format is


DAYS: HOURS: MINUTES. The Report Period entry is used by the
Waveform Server to determine how often to retrieve demand data
from the DFP200 device. Note that this is not the same as a Demand
Interval. For example, if the DFP200 device is configured for a
demand interval of 10 minutes, and the ReportPeriod parameter in
the WFServer.ini file is set to: ReportPeriod=00:01:00 then a
demand report will be retrieved every hour, and will contain six (6)
entries – one every ten (10) minutes. If the default of 00:00:00 is
retained, demand reports will not be retrieved by the Waveform
Server.

You may also configure the time you wish demand report retrieval to
begin by editing the StartTime entry. The default value for
StartTime is 00:00. The format is HOUR: MINUTE with the default
value representing 12 a.m. (midnight). For example, if the
ReportPeriod is set for a one hour period, and the Waveform Server
application is launched at 11:45 pm, the first report will be retrieved

http://genet.edc.ge.com/systems/Technote/note63.htm 5/27/99
GE PMCS Tech Note 63 Page 2 of 2

at 12 midnight, the next report at 1:00 am, 2:00 am, etc.

After modifications are completed as needed to these two


parameters, save the Wfserver.ini file and restart the Waveform
Server application. Demand Reports will now be retrieved for each
configured DFP200.

Keywords

DFP200, Demand Reports, Waveform Server configuration, Report Period, Start


Time

Related Notes

none

Last Revised 9/11/1998

Search GE | GE home page | GE news | GE business finder | GE products & services


About Us | What's New | Products & Services | Publications
Process Solutions | Year 2000 | Contact Us

Legal Disclaimer

http://genet.edc.ge.com/systems/Technote/note63.htm 5/27/99

You might also like