Building Design Process
Building Design Process
This is an outline of the building process. Your project may or may not require all of the
steps outlined below. You may perform some or all of the steps but seeing them outlined
will help you to see the road ahead.
Feasibility Study
This first step undertakes to examine the issues that will make the project feasible or
unfeasible, and in some cases to determine the best strategy for proceeding with the
project. The following may be addressed in the Feasibility Study:
• Budget and scope of the project: Will the proposed project work at the desired
budget?
• Site analysis: Is the site chosen suitable? Is it zoned for the project? Are there,
utilities, etc.? For some projects, Structures NW may assist in analyzing the site to
assess the feasibility of its use for the proposed project.
• What is the best strategy for developing the project on a given site?
• What is the optimal size and type of building?
• Is the building or site chosen structurally sound? What will be required in the way
of soils tests, seismic design, etc.?
• How will other site considerations, such as solar access, wind, etc., affect the
project?
• What other cost, planning, and design constraints might the project run into?
By addressing these questions up front, we can avoid costly and frustrating surprises
down the road.
Programming
Programming is the process used to arrive at the set of criteria on which the design is
based. The programming phase is where the project is built—not brick by brick, but
decision by decision. This is the time when a common vocabulary for the project is
created, and preferences and requirements are determined and built into the overall
picture before time is invested in design.
One of the most important purposes of the program is to reduce the need for later
backtracking and redesign. A thorough programming process is essential for maintaining
an orderly and cost-effective design process later in the project. We have found that many
problems that people encounter with the design of their building could have been avoided
with a thorough programming process. Structures NW goes through a detailed list of
criteria or what I call drivers with the client, looking for client needs that translate into
square footage or other design requirements. Programming is the process where
Structures NW goes through all the needs of the client so that appropriate design
decisions can be made later in the process.
Structures NW LLC www.structuresnw.com 360/ 576-6311
Structures NW encourages clients to get directly involved in establishing the program.
Programming usually involves a meeting or series of one to two hour meetings with us. In
the programming meetings, the client’s specific goals, priorities, and uses for the building
are discussed in detail. Structures NW will encourage the client to consider all important
issues up front, help the client understand the ramifications of their decisions, and make
recommendations based on past experience and professional knowledge. All of the
requirements of the project are then put into a clearly-organized written program which will
be a reference throughout the design process.
Items specifically analyzed in the programming phase typically include the following:
• Finalize all engineering issues such as structural system, heating and cooling
systems, lighting system, etc.
• Coordinate with any other design consultants.
• Finalize construction techniques and materials.
• Finalize HVAC equipment requirements, sizes, layout.
• Finalize all design issues that affect the look of the building and the feel of the
rooms. Overhangs Roof pitch etc
• Finalize any code issues.
• Complete outline specifications, a written list of criteria for materials and building
methods.
• Revise cost estimate, considering probable labor and material requirements.
Construction Documentation
Based on approved Design Development documents, construction drawings and written
specifications are put together which describe in detail all of the construction work to be
done. These are the documents upon which the construction contract will be based, and
which the contractor will use to build the project. If a building permit is required, the
application is usually made at the end of Construction Documentation.
• Prepare specific and detailed Construction Drawings required to bid, apply for
approval from building and planning departments, and complete construction.
These will include dimensioned floor plans, elevations, sections, details, engineering
plans such as electrical, mechanical, structural, and/or civil engineering plans,
landscape plans, energy use analysis , and written Specifications that covering all
materials, methods of construction, and construction contract requirements.
Specifications are closely coordination with construction drawings.
• Complete all coordination with consultants. Drawings and written Specifications is
essential to avoid conflicts between the various trades during construction.
• Resolve any outstanding building or planning code issues.
• Apply for permit if required.
Structures NW LLC www.structuresnw.com 360/ 576-6311
Bidding and Negotiation
The project is put out to bid, a contractor is selected, and a construction contract is drawn
up between the contractor and the client.
• Prepare documents for bidding such as the Invitation to Bid, Instructions to Bidders,
Bid Form, etc.
• Advertise bids and solicit contractors to bid on the project.
• Coordinate and provide bid documents to bidders.
• Check bidders’ qualifications (references, insurance, experience, personnel, etc.).
• Provide additional information (in the form of Addenda to the Construction
Documents) as needed to bidders.
• Meet with contractors and material suppliers.
• Receive bids.
• Assist client in negotiation and preparation of Owner/Contractor Agreement and
other necessary documents.
Construction Administration
On-site observation and conscientious administration of paperwork throughout
construction is necessary to assure that communication flows smoothly, that high
standards are maintained, and that the client gets their construction money’s worth.
• Make periodic site visits while project is under construction, observing construction
for compliance of design intent.
• Conduct on-site meetings with contractors, suppliers, client, etc.
• Administrate changes with client and contractor. (there are always changes)
• Clarify drawings as required.
• Complete additional drawings as required.
• Process numerous documents and paperwork for contractor’s payment, changes,
submittals from the contractor, etc.
• Participate in resolution should any disputes arise during construction.
Post-Occupancy Training
On-site training and/or phone consultation with mechanical contractors upon completion of
the construction project to fully understand the operation and maintenance of all
equipment.