OWNERS MANUAL
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
ALL WEATHER DESIGN
FOR MARINE-BOAT-PATIO AND POOL
PDWR33 PDWR3T
PDWR53 PDWR5T
PDWR63 PDWR6T
www.pyleaudio.com
FIG 1:INDOOR/OUTDOOR SWITCH FIG 2 : CONNECTING YOUR SPEAKER
IN-DOOR / OUT-DOOR NEGATIVE (BLACK)
INPUT BINDING POST
EQUALIZATION SWITCH
POSITIVE (RED) INPUT
IN-DOOR OUT-DOOR
BINDING POST
IMPORTANT:
CONNECT POSITIVE WIRE
TO THE POSITIVE TERMINAL
OF YOUR AMPLIFIER OR RECEIVER
CONNECT NEGATIVE WIRE TO
THE NEGATIVE TERMINAL OF
YOUR AMPLIFIER OR RECEIVER
INDOOR/OUTDOOR BASS BOOST SWITCH:
Audio Experts Have Known For Years That Sound,And Bass Frequencies In
Particular,Lose Impact In Outdoor Environments. To Compensate,Many People
Will Turn Up The Volume,Overdriving Their System,And Damaging The The Following Will assist you in connecting the indiviual speajers to
Speakers Components. your amplifier or receiver.
In Response,“PDWR”Speaker Designed A Unique Switch That Increases Bass
When In The “OUTDOOR”Position.At The Same Time,it Protects
(1) First turn your amplifier of to avoid damage which may result from
“PDWR”Speaker
From Overdrive Damage In Exterior Applications.The Result Is Dramatically
accidental shorting of the speaker leads
Improved Sound Reproduction,More Reliable Operation,And Longer Life.
In The “INDOOR” Position,Performance is Automatically Adjusted To Produce (2) Correct phase polarity is critical for proper stereo imagingand bass
Optimum Results For Use Inside Rooms. performance.the red(+) terminal on your amplifier or receiver must
be connected to the red(+) terminal on your speaker,the same
ALL WEATHER DESIGN: applies for the balck(-) terminal
The Materials Used In The Manufature Of “PDWR”Speakers Have Been
Carefully Selected ToStand UpTo Extremes Of Temperature (FROM-50 F TO 200 (3) Connect one loudspeaker at a time to ensure proper connection of
F),rain,
left and right channels,make sure all wires are firmly fastened
Snow,Heat,Salt Water,And The Sun, sUV Rays. “PDWR” Is Ruggedly Constructed
With A Combination Of:(1)A Low-resonance Mineral-filled Polypropylene
Cabinet (2)Brass,Stainless Stell And Aluminum Hardware,And(3)Gold-plated (4) If you notice a great jack of bass/or centrl image focus,double check
Binding Posts. your connections for proper polarity
1. 2.
FIG 3:EAVE MOUNTING FATURES :
PDWR33 PDWR3T
Excellent For Monitor or Surround Excellent For Monitor or Surround
Sound Applications Sound Applications
* 3-1/2” long Throw Woofer * 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter * 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power * 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz * Frequency Response70Hz-20KHz
* 8 Ohm Impedance * 8 Ohm Impedance
* Vented Design for High Power * Vented Design for High Power
and Deep Bass Response and Deep Bass Response
* Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals * Gold Plated Plug Terminals
* Spring Loaded Mounting * Spring Loaded Mounting
BracketIncluded BracketIncluded
*Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance
* Dimensions: Compatible
5-5/8”(W)x8”(H)x4-7/8”(D) *Quick Connect/Disconnect Terminals
* Dimensions:
5-5/8”(W)x8”(H)x4-7/8”(D)
MOUNTING THE BRACKET
(1) Remove The Bracket Knobs And The Bracket From The Speaker
(2) Hold The Bracket UpTo The Mounting Surface.“Plmr” Can Be Mounted Either
Horizontally Or Vertically,Hold The Bracket So That The Speaker Wire Fits
FIG 4:OVERALL DIMENSIONS
Through The Large,Circular Wire Hple In The Bracket,Align The Bracket To
Be Square With The Surrounding (Use A Level For Accuracy)
(3) Mark The Locations Of The Three Shaped Screw Holes,Use All Of The
Holes
(4) Drill Pilot Holes Into The Mounting Surface
(5) Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The
Mounting Bracket,The Bracket So That The Holes All Line Up
(6) Use Your Hardware To Attach The Bracket To The Mounting Surface
204mm
(8”)
FINAL ADJUSTMENTS
(1) After Checking That The Speaker Is In-phase And Works Correctly,
Angle TheSpeaker For The Best Sound
(2) Hand Tighten The Bracket Knobs Only,Power Tools May
Over-TightenThe Knob,And Strip The Threads Of The Insert
(3) Check That The Entire Installation Is Safe And Secure 124mm
144mm (4-7/8”)
(5-5/8”)
3. 4.
FATURES : FATURES :
PDWR53 PDWR5T PDWR63 PDWR6T
Excellent For Monitor or Surround Excellent For Monitor or Surround Excellent For Monitor or Surround Excellent For Monitor or Surround
Sound Applications Sound Applications Sound Applications Sound Applications
* 5-1/4” long Throw Woofer * 5-1/4” long Throw Woofer * 6-1/2” long Throw Woofer * 6-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter * 1/2” Polymer Dome Tweeter * 1” Polymer Dome Tweeter * 1” Polymer Dome Tweeter
* 250 Watts Rated Peak Power * 250 Watts Rated Peak Power * 350 Watts Rated Peak Power * 350 Watts Rated Peak Power
* Frequency Response:85Hz-20KHz * Frequency Response:85Hz-20KHz * Frequency Response:50Hz-20KHz * Frequency Response:50Hz-20KHz
* 8 Ohm Impedance * 8 Ohm Impedance * 8 Ohm Impedance * 8 Ohm Impedance
* Vented Design for High Power * Vented Design for High Power * Vented Design for High Power * Vented Design for High Power
and Deep Bass Response and Deep Bass Response and Deep Bass Response and Deep Bass Response
* Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals * Gold Plated Plug Terminals * Gold Plated Plug Terminals * Gold Plated Plug Terminals
* Spring Loaded Mounting * Spring Loaded Mounting * Spring Loaded Mounting * Spring Loaded Mounting
BracketIncluded BracketIncluded BracketIncluded BracketIncluded
*Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance *Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance
* Dimensions: Compatible * Dimensions: Compatible
7-1/8”(W)x9-7/8”(H)x5-3/4”(D) *Quick Connect/Disconnect Terminals 9-1/4”(W)x13”(H)x7-3/8”(D) *Quick Connect/Disconnect Terminals
* Dimensions: * Dimensions:
7-1/8”(W)x9-7/8”(H)x5-3/4”(D) 9-1/4”(W)x13”(H)x7-3/8”(D)
FIG 4:OVERALL DIMENSIONS FIG 4:OVERALL DIMENSIONS
250mm 331mm
(9-7/8”) (13”)
145mm 188mm
180mm (5-3/4”) 238mm (7-3/8”)
(7-1/8”) (9-1/4”)
5. 6.
OWNERS MANUAL
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
ALL WEATHER DESIGN
FOR MARINE-BOAT-PATIO AND POOL
PDWR33 PDWR3T
PDWR53 PDWR5T
PDWR63 PDWR6T
www.pyleaudio.com
FIG 1:INDOOR/OUTDOOR SWITCH FIG 2 : CONNECTING YOUR SPEAKER
IN-DOOR / OUT-DOOR NEGATIVE (BLACK)
INPUT BINDING POST
EQUALIZATION SWITCH
POSITIVE (RED) INPUT
IN-DOOR OUT-DOOR
BINDING POST
IMPORTANT:
CONNECT POSITIVE WIRE
TO THE POSITIVE TERMINAL
OF YOUR AMPLIFIER OR RECEIVER
CONNECT NEGATIVE WIRE TO
THE NEGATIVE TERMINAL OF
YOUR AMPLIFIER OR RECEIVER
INDOOR/OUTDOOR BASS BOOST SWITCH:
Audio Experts Have Known For Years That Sound,And Bass Frequencies In
Particular,Lose Impact In Outdoor Environments. To Compensate,Many People
Will Turn Up The Volume,Overdriving Their System,And Damaging The The Following Will assist you in connecting the indiviual speajers to
Speakers Components. your amplifier or receiver.
In Response,“PDWR”Speaker Designed A Unique Switch That Increases Bass
When In The “OUTDOOR”Position.At The Same Time,it Protects
(1) First turn your amplifier of to avoid damage which may result from
“PDWR”Speaker
From Overdrive Damage In Exterior Applications.The Result Is Dramatically
accidental shorting of the speaker leads
Improved Sound Reproduction,More Reliable Operation,And Longer Life.
In The “INDOOR” Position,Performance is Automatically Adjusted To Produce (2) Correct phase polarity is critical for proper stereo imagingand bass
Optimum Results For Use Inside Rooms. performance.the red(+) terminal on your amplifier or receiver must
be connected to the red(+) terminal on your speaker,the same
ALL WEATHER DESIGN: applies for the balck(-) terminal
The Materials Used In The Manufature Of “PDWR”Speakers Have Been
Carefully Selected ToStand UpTo Extremes Of Temperature (FROM-50 F TO 200 (3) Connect one loudspeaker at a time to ensure proper connection of
F),rain,
left and right channels,make sure all wires are firmly fastened
Snow,Heat,Salt Water,And The Sun, sUV Rays. “PDWR” Is Ruggedly Constructed
With A Combination Of:(1)A Low-resonance Mineral-filled Polypropylene
Cabinet (2)Brass,Stainless Stell And Aluminum Hardware,And(3)Gold-plated (4) If you notice a great jack of bass/or centrl image focus,double check
Binding Posts. your connections for proper polarity
1. 2.
FIG 3:EAVE MOUNTING FATURES :
PDWR33 PDWR3T
Excellent For Monitor or Surround Excellent For Monitor or Surround
Sound Applications Sound Applications
* 3-1/2” long Throw Woofer * 3-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter * 1/2” Polymer Dome Tweeter
* 200 Watts Rated Peak Power * 200 Watts Rated Peak Power
* Frequency Response70Hz-20KHz * Frequency Response70Hz-20KHz
* 8 Ohm Impedance * 8 Ohm Impedance
* Vented Design for High Power * Vented Design for High Power
and Deep Bass Response and Deep Bass Response
* Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals * Gold Plated Plug Terminals
* Spring Loaded Mounting * Spring Loaded Mounting
BracketIncluded BracketIncluded
*Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance
* Dimensions: Compatible
5-5/8”(W)x8”(H)x4-7/8”(D) *Quick Connect/Disconnect Terminals
* Dimensions:
5-5/8”(W)x8”(H)x4-7/8”(D)
MOUNTING THE BRACKET
(1) Remove The Bracket Knobs And The Bracket From The Speaker
(2) Hold The Bracket UpTo The Mounting Surface.“Plmr” Can Be Mounted Either
Horizontally Or Vertically,Hold The Bracket So That The Speaker Wire Fits
FIG 4:OVERALL DIMENSIONS
Through The Large,Circular Wire Hple In The Bracket,Align The Bracket To
Be Square With The Surrounding (Use A Level For Accuracy)
(3) Mark The Locations Of The Three Shaped Screw Holes,Use All Of The
Holes
(4) Drill Pilot Holes Into The Mounting Surface
(5) Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The
Mounting Bracket,The Bracket So That The Holes All Line Up
(6) Use Your Hardware To Attach The Bracket To The Mounting Surface
204mm
(8”)
FINAL ADJUSTMENTS
(1) After Checking That The Speaker Is In-phase And Works Correctly,
Angle TheSpeaker For The Best Sound
(2) Hand Tighten The Bracket Knobs Only,Power Tools May
Over-TightenThe Knob,And Strip The Threads Of The Insert
(3) Check That The Entire Installation Is Safe And Secure 124mm
144mm (4-7/8”)
(5-5/8”)
3. 4.
FATURES : FATURES :
PDWR53 PDWR5T PDWR63 PDWR6T
Excellent For Monitor or Surround Excellent For Monitor or Surround Excellent For Monitor or Surround Excellent For Monitor or Surround
Sound Applications Sound Applications Sound Applications Sound Applications
* 5-1/4” long Throw Woofer * 5-1/4” long Throw Woofer * 6-1/2” long Throw Woofer * 6-1/2” long Throw Woofer
* 1/2” Polymer Dome Tweeter * 1/2” Polymer Dome Tweeter * 1” Polymer Dome Tweeter * 1” Polymer Dome Tweeter
* 250 Watts Rated Peak Power * 250 Watts Rated Peak Power * 350 Watts Rated Peak Power * 350 Watts Rated Peak Power
* Frequency Response:85Hz-20KHz * Frequency Response:85Hz-20KHz * Frequency Response:50Hz-20KHz * Frequency Response:50Hz-20KHz
* 8 Ohm Impedance * 8 Ohm Impedance * 8 Ohm Impedance * 8 Ohm Impedance
* Vented Design for High Power * Vented Design for High Power * Vented Design for High Power * Vented Design for High Power
and Deep Bass Response and Deep Bass Response and Deep Bass Response and Deep Bass Response
* Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet * Heavy Duty Plastic Cabinet
* Gold Plated Plug Terminals * Gold Plated Plug Terminals * Gold Plated Plug Terminals * Gold Plated Plug Terminals
* Spring Loaded Mounting * Spring Loaded Mounting * Spring Loaded Mounting * Spring Loaded Mounting
BracketIncluded BracketIncluded BracketIncluded BracketIncluded
*Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance *Quick Connect/Disconnect Terminals *Transformer Circuit For Impedance
* Dimensions: Compatible * Dimensions: Compatible
7-1/8”(W)x9-7/8”(H)x5-3/4”(D) *Quick Connect/Disconnect Terminals 9-1/4”(W)x13”(H)x7-3/8”(D) *Quick Connect/Disconnect Terminals
* Dimensions: * Dimensions:
7-1/8”(W)x9-7/8”(H)x5-3/4”(D) 9-1/4”(W)x13”(H)x7-3/8”(D)
FIG 4:OVERALL DIMENSIONS FIG 4:OVERALL DIMENSIONS
250mm 331mm
(9-7/8”) (13”)
145mm 188mm
180mm (5-3/4”) 238mm (7-3/8”)
(7-1/8”) (9-1/4”)
5. 6.