// Product Sheet IR 2011

Dimensional Drawing Spatial Illustration

Intended Use
The IR 2011 is an optoelectronic edge
sensor. It is solely used in conjunction
with BST eltromat controllers for
contact-free optical scanning of web
edges.
Note: For commissioning and opera-
tion, please refer to the separate docu-
mentation.

Mounting
The sensor can be mounted with an
Working Principle and Characteristics optional sensor mount available at BST
eltromat.
 Optoelectronic edge sensor (insensitive to external light sources)
 No influence on the measurements by flutter of the material within the sensor measuring range
Electrical Connection
 Optional connection for air sweep protects the lens against contamination from paper dust or
abraded particles
 Selectable operating modes: Analog (output signal 0-10 V); Digital (via integrated CAN-Bus)
 Operation display: LED (2 colors)
 Field of application: transparent and non-transparent materials, thick materials

General Data Plug viewed from sensor

Sensor IR 2011/40 IR 2011/70 Pin Analog Mode Digital Mode

Fork Width 40 mm 70 mm 1 +12 … 30 VDC +12 … 30 VDC
Measuring Range (Analog Mode) 16 mm (± 8 mm) 16 mm (± 8 mm) 2 Analog signal CAN-H
Measuring Range (Digital Mode) 24 mm (± 12 mm) 20 mm (± 10 mm) 0 … 10 V
Light Emitter Wave Length 630 nm 3 0V 0V
4 0V CAN-L
Electrical Data
Supply Voltage 12 … 30 VDC Order Data
Power Consumption 20 mA (24 VDC) Sensor Part No.
Output Signal (Analog Mode) 0 … 10 V IR 2011/40 3SEOP156765
Output Signal (Digital Mode) BST-eltromat CAN-Bus IR 2011/70 3SEOP164183
Polarity Reversal Protection (Supply) Yes
Connecting Cable Part No.
Short Circuit Protection (Analog Output) Yes
Analog: 3 m 2ELKB133456
Electrical Connection M8 plug, 4-pin
Analog: 5 m 2ELKB133457
PDB.025.EN.07/04.05.2016 | Subject to change

Mechanical Data Analog: 10 m 2ELKB128967

Digital: 2 m 1ELKB131993
Weight < 400 g < 500 g
Digital: 5 m 1ELKB131994

Operating Conditions Digital: 10 m 1ELKB131995

Ambient Temperature In Operation 0 … +60 °C Accessories Part No.

In Storage -10 … +70 °C Blowing Device 3BGSO162310
Protection Class IP 54
Noise Emission < 70 dB
RoHS Yes

BST eltromat International GmbH  Heidsieker Heide 53  D-33739 Bielefeld  Tel. +49 (0) 5206 999-0  Fax +49 (0) 5206 999-999  www.bst-eltromat.com Page: 1/1