Color Flatbed Scanner

• Installation • Usage & • Troubleshooting

Maintenance
All trademarks and brand names mentioned in this publication are property of their
respective owners.

© 2003. All rights are reserved. No portion of this document may be reproduced
without permission.
Table of Contents
INTRODUCTION ..................................................................................................................................1
HOW TO USE THIS GUIDE .....................................................................................................................1
CONVENTIONS OF THIS GUIDE ..............................................................................................................2
A NOTE ABOUT ICONS ..........................................................................................................................2
SYSTEM REQUIREMENTS ......................................................................................................................2
BOX CONTENTS ....................................................................................................................................3
PRODUCT INFORMATION.......................................................................................................................4
CHAPTER I. INSTALLING THE SCANNER ...................................................................................5
SOFTWARE INSTALLATION REQUIREMENTS ..........................................................................................5
HARDWARE REQUIREMENTS ................................................................................................................5
INSTALLING AND SETTING UP THE SCANNER ........................................................................................6
Step 1. Connecting the Scanner to Your Computer ........................................................................6
Step 2. Installing the Software ........................................................................................................6
SOFTWARE SETUP TROUBLESHOOTING.................................................................................................7
INSTALLING ADDITIONAL SOFTWARE...................................................................................................8
SCANNER SETUP AFTER WINDOWS XP UPGRADE ................................................................................8
CHAPTER II. USAGE AND MAINTENANCE .................................................................................9
OPERATING THE SCANNER....................................................................................................................9
Testing the Scanner.......................................................................................................................10
Defining The Custom button .........................................................................................................11
THE SCANNER UTILITY PROGRAM......................................................................................................11
Connection Status .........................................................................................................................12
Calibrating the Scanner................................................................................................................13
Aligning the Scanner.....................................................................................................................13
MAINTENANCE ...................................................................................................................................14
APPENDIX A: TROUBLESHOOTING............................................................................................15
SCANNING PROBLEMS ........................................................................................................................15
COMMON -HOW-TO- QUESTIONS........................................................................................................18
APPENDIX B: SPECIFICATIONS ...................................................................................................20
APPENDIX C: CUSTOMER SERVICE AND WARRANTY.........................................................21
STATEMENT OF LIMITED WARRANTY .................................................................................................21
FCC RADIO FREQUENCY STATEMENT ................................................................................................22
 Introduction
Welcome to the world of computer imaging. Your new scanner will improve the
professionalism of your day-to-day computing tasks by allowing you to input images
and electronic text into your computer system.
Like all of our products, your new scanner is thoroughly tested and backed by
our reputation for unsurpassed dependability and customer satisfaction.
Thank you for choosing us as your scanner supplier. We hope you will continue
to turn to us for additional quality products as your computing needs and interests
grow.

How to Use This Guide

This User’s Guide provides instructions and illustrations on how to install and
operate your scanner. This guide assumes the user is familiar with Microsoft
Windows XP, 98, Me and 2000 Professional. If this is not the case, we suggest you
learn more about Microsoft Windows by referring to your Microsoft Windows
manual before using your scanner.
The Introduction section of this manual describes the box contents and minimum
computer requirements to use this scanner. Before you start installing your scanner,
check the box contents to make sure all parts are included. If any items are damaged
or missing, please contact the vendor where you purchased your scanner or our
customer service directly.
Chapter I. Installing the Scanner describes how to install scanner’s software and
connect the scanner to your computer. Note: The scanner connects to your
computer through the Universal Serial Bus (USB). If your computer does not
support USB technology, you will need to purchase a USB interface card to add
USB capabilities to your computer, or buy and install USB connectors if your
motherboard has USB capabilities. This guide assumes that your computer is
USB-ready and has a free USB port.
Chapter II describes how to test, maintain and clean your scanner. It also
describes how to use the scanner utility program which helps you troubleshoot and fix
connection problems which may have occurred during the scanner installation.
Appendix A contains technical support information that can help you solve
simple problems. Before calling for help, please read through Appendix A:
Troubleshooting.
Appendix B contains the Specifications of the scanner you purchased.
Appendix C contains our limited warranty agreement and FCC statement
concerning the product.

1
Conventions of This Guide
Bold — Important note or first use of an important term in a chapter.
ALL CAPS — Represents commands or contents on your computer screen.

A Note about Icons

This guide uses the following icons to point out information that deserves special
attention.

Danger: A procedure that must be followed carefully to

prevent injury, or accidents.
Danger

Caution: Information that, if not followed, may result in data

loss or damage to the product.
Caution

Pay Special Attention: Instructions that are important to

remember and may prevent mistakes.
Attention

System Requirements1
• Windows/Intel Compatible Personal Computer
• Pentium CPU or above
• CD-ROM Drive
• 64 MB RAM (128 MB Recommended)
• 160 MB Free Hard Disk Space (260 MB Recommended)
• USB Port
• Microsoft™ Windows XP, 98, Me, and 2000 Professional
NOTE: Windows NT 4.0 does not support Universal Serial Bus (USB)
connectivity.
• Video card that supports 16-bit color or greater

1
Higher requirements might be needed when scanning or editing a large quantity of image data. The
system requirements here are only a guideline, as in general the better the computer (motherboard,
processor, hard disk, RAM, video graphic card), the better the results.

2
Box Contents2

1. Scanner
2. USB Cable
3. Quick Guide (Scanner)
4. Quick Guide (Scanner Buttons)
5. Setup / Application CD-ROM includes the following software applications3:
• Scanner Setup software
• ABBYY FineReader Sprint 5.0 (OCR software)
• NewSoft Presto! PageManager (Document Management Software)
• NewSoft Presto! ImageFolio (Image Editing Software)
• NewSoft Presto! Mr. Photo (Photo Organizer)
• Action Manager 32
• Scanner User’s Guide (Electronic version)
• Scanner Software User’s Guide (Electronic version)
• Registration Form (Electronic version)
• Adobe Acrobat Reader (PDF Product Manuals Reading Program)

2
Save the box and packing materials in case you need to transport this scanner in the future.
3
The bundled software may change at any time without prior notice.

3
Product Information
Please fill in the following information for your own records. You will need it
when you contact your dealer or our service center in the future.

Serial Number: ‰‰‰‰‰‰‰‰‰‰‰‰

(Located at the bottom of the scanner)

Date of Purchase: ‰‰ - ‰‰ - ‰‰‰‰

4
 Chapter I. Installing the Scanner
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the Box Contents section of
this guide.

Software Installation Requirements

Your scanner comes with the image-editing software (Presto! ImageFolio), OCR
software (FineReader), document management software (Presto! PageManager), the
scanner’s driver, Scanner Utility and Action Manager 32 software. All of these
software applications use approximately 160 megabytes of hard disk space after they
are installed into your computer. To ensure ample room for the installation, as well as
for scanning and saving images, a minimum of 260 megabytes of hard disk space is
recommended.
The USB scanner can only operate under the Microsoft Windows 98, Me, 2000
Professional or XP operating system.

Hardware Requirements
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports hot Plug and Play. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks the same
as the one pictured below. Note that on some computers, the USB port at the rear of
the computer may be occupied and additional ports may be found on the monitor or
keyboard. If you are having trouble in locating the USB port on your computer, please
refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which
usually appear as shown below.

USB Connector(s)

5
 If you don’t find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the scanner.

Step 1. Connecting the Scanner to Your Computer

1. Plug the square end of the included USB cable to the USB port of the scanner.
2. Plug the rectangular end of the USB cable to the USB port on the back of your
computer.
Note: If there is another USB device connected to the computer, connect
the scanner to an available USB port.
3. If you plan to connect your scanner to a USB hub4, make sure that the hub is
connected to the USB port in your computer. Next, connect the scanner to the
USB hub.
Note: If you do not have a USB port available, you might need to buy a
USB port.

Step 2. Installing the Software

1. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the “Add New Hardware Wizard” or
“Found New Hardware Wizard” to be launched.

2. For Windows 98 & 2000

a. Click on the NEXT button when the “Add New Hardware Wizard” window
is displayed.

4
The USB hub is not included with the scanner.

6
 b. Select “SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE
[RECOMMENDED]” and click on the NEXT button.
c. The next window will ask you where to search to find the drive. Select
“CD-ROM drive”, and deselect “Floppy disk drives” if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into
your CD-ROM drive and then click on the NEXT button.
e. Click on the “NEXT” button in the window that appears. Afterwards, for
Windows 98 users, please skip to Step 5.

3. For Windows XP & Me

a. Insert the Setup/Application CD-ROM, included with your scanner, into
your CD-ROM drive.
b. Select “INSTALL THE SOFTWARE AUTOMATICALLY
[RECOMMENDED]” and click on the NEXT button.
c. Click on the “NEXT” button in the window that appears. Afterwards, for
Windows Me users, please skip to Step 5.

4. Windows XP & 2000 users –During the process of the installation, a message
“Windows Logo authorization required” or “Digital Signature required” might be
prompted. Please ignore it, and click on “CONTINUE ANYWAY” to continue the
installation without any misgiving at your scanner functioning.

5. When the system completes the installation, click on the “FINISH” button.

6. Follow the on-screen instructions to install all software that your new USB scanner
requires.

7. After the software is installed, close all open applications and click on the FINISH
button to restart your computer.

If the scanner installation is not started and displayed automatically on

the screen, click START, select RUN and type in [d:\setup] (where d:
Attention is the drive letter assigned to the CD-ROM drive of your computer.)

Software Setup Troubleshooting

Carefully review the steps outlined in this guide and the Quick Guide that
accompanied your scanner.
If you are still having problems, please check that:
• You have 160MB of free space on your hard disk drive.
• The scanner is plugged in and has power.
• You are using the USB cable supplied with the scanner.

7
 • The square end of the USB cable is plugged into the rear of the scanner.
• The rectangular end of the USB cable is plugged into the back of your
computer.
If you deviated from the installation procedures defined in this manual, please
unplug the USB cable from the scanner and reinstall the software from the CD-ROM.
To reinstall your scanner’s software, click START, RUN, then type D:\Setup (where
D represents the letter of your CD-ROM drive). Carefully follow all the installation
instructions presented in the Setup Wizard. Reboot your computer when prompted,
and plug the USB cable back into the scanner while your computer is still turned on.

Installing Additional Software

Your scanner is TWAIN compliant and functions with virtually all available
TWAIN compatible software. If you purchase additional software to be used with
your scanner, please make sure that it conforms to the TWAIN standard.

Scanner Setup After Windows XP Upgrade

If you plan to upgrade your operating system from Windows 98 or Me to
Windows XP after having installed the scanner software, please follow the
instructions below:
1. Unplug the scanner’s AC power adapter from the electrical outlet.
2. Unplug the scanner’s USB cable from the rear of the computer.
3. From the Windows START menu, click on [Programs] and then [USB Scanner].
In the pop-up menu that opens, click on [Uninstall USB Scanner]. Follow the on-
screen instructions to remove all the scanner software.
4. After uninstallation completes, close all open applications and click the [Finish]
button to restart your computer.
5. Start installing your Windows XP upgrade software by following Microsoft’s
related procedures.
6. When the Windows XP upgrade is done, re-install the scanner’s hardware and
software. Refer to the scanner setup quick guide for details.

8
 Chapter II. Usage and Maintenance

Operating the Scanner

Your scanner accepts documents as small as business cards and as large as letter-
sized documents. However, some software programs have limitations as to the
information they can handle. The capacity of the computer’s memory and free space
on your hard drive can also limit the physical size of the document that you scan.
There are two different ways to operate the scanner:
1. From within an image-editing program that can acquire images from the
scanner.
2. By using the Action Manager 32 program that is automatically installed as
your scanner software.
Your scanner needs to be driven by some type of software program. Since all
documents or images (whether text or pictures) that are acquired from the scanner are
treated by your computer as images, most scanning will probably be done from an
image-editing program where you can view, edit, save and output the scanned images.
An image-editing program has been bundled with your scanner on the included
Setup/Application CD-ROM. It will allow you to alter and correct any scanned
images by using a variety of filters, tools and effects.
What about scanning text documents and editing them in a word processor? This
is the role of Optical Character Recognition (OCR) software. OCR software converts
the image files that are created from scanning text documents into text files that can
be viewed, edited and saved by word processors. An OCR program has also been
bundled on the included Setup/Application CD-ROM, and if you wish to use the
scanner in this way you should install the OCR software that is included.
Action Manager 32 is a program that allows you to conveniently scan images
and text without the need to work directly within any image-editing application (i.e.
Presto! ImageFolio). Action Manager 32 also includes features to allow you to use
your scanner as fax5 and copy machines6.
Please refer to the Action Manager 32 section of the Software User’s Guide or
the Action Manager 32 on-line Help (accessible by right-clicking on the Action
Manager 32 window and choosing Help) for more information about these functions.

5
A fax/modem and fax software is required to send faxes.
6
A printer is required for the copy utility.

9
Testing the Scanner
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner's document cover and place a picture onto the scanner glass
headfirst and face-down.

Removable
Document Cover
Place document
facedown to center.

Front of Scanner

2. Gently close the document cover.

3. Next, open the scanner's image-editing program. Click on the Windows
START button and then PROGRAMS, USB SCANNER, PRESTO!
IMAGEFOLIO, and then PRESTO! IMAGEFOLIO.
4. When Presto! ImageFolio opens, click on FILE and then SELECT TWAIN
SOURCE. In the window that opens, choose USB SCANNER. Click on the
SELECT button to close the window. This procedure allows Presto!
ImageFolio to gain access to the scanner.
5. Within Presto! ImageFolio, click on FILE, ACQUIRE and then choose
ACQUIRE.
6. The USB Scanner (TWAIN) window will open.
7. CLOSE the Guided Scan window and click the SCAN button.
8. If an image appears on your screen, your scanner is working properly.
To learn how to manipulate the image, please read the Chapter II. The Scanner
Software of the Software User’s Guide.

10
 If the test failed in any way, please refer to The Scanner Utility Program
section of this manual and follow the instructions therein.
Attention

Defining The Custom button

With the Custom Utility, the users may turn the scanner’s Custom button into a
multifunctional assistant by defining it as any utility that is included in the Action
Manager 32. Once the Custom button is defined, the selected utility will be opened
with one press at the Custom button.
Users, after pressing the Custom button or alternatively click the Custom Utility
button in the Action manager 32 window for the very first time after completing
the installation, will be prompted to define the Custom button.
The following describes how to define the Custom button:
1. Press the Custom button on the scanner.
2. The Custom Utility interface will be opened.
3. Select a desired utility from the list.

4. Click the button, and the selected utility will be launched and appear on
the screen instantly.

For those who have defined the Custom button for the very first time via
Custom Utility in the Action Manager 32, they will not be prompted to
Attention define the Custom button again when they press the Custom button on
the scanner, even if it is the first time they press the Custom button. For
details, please read the Chapter II. The Scanner Software section of the
Software User’s Guide.

The Scanner Utility Program

The Scanner Utility Program can help you get your new scanner up and running.
In addition, it contains a number of other features to help you tailor and control the
scanner.
Most significantly, the Scanner Utility Program checks to make sure that the
scanner software is properly installed and the scanner and computer are
communicating with each other.
The Scanner Utility also allows you to define the exact position on the scanning
glass where scanning will begin. The scanner was tuned to its optimal working

11
 condition at factory, but some refinement of the initial scanning position may still be
necessary.

Turn Lamp
On/Off

Verify

Scan

Alignment
Alignment
Position
Window

The Scanner Utility program does NOT affect the quality of scanned images.
It is only used to establish a connection with the scanner. Settings that affect
Attention the scanned image (i.e., color, size, readability, clarity, etc.) can be found in
the scanner software programs and especially the TWAIN interface.

Connection Status
The first step to take when troubleshooting connection problems with your
scanner is to check all physical connections. Make sure your scanner is plugged in
and the USB cable is fit snugly into the rear of your scanner and computer.
Secondly, determine the status of your USB hardware and software configuration.
To do this, please run the Scanner Utility program as described below:
1. Click on the START button, then choose PROGRAMS, USB SCANNER and
then SCANNER UTILITY.
2. If there is a problem with the installation, the following message will appear:

12
 If you receive the above message, please refer to the Scanning Problems
section of Appendix A Troubleshooting.
3. If the connection is OK, the following window will be displayed:

Calibrating the Scanner

Calibrate the scanner if colors appear in areas that should be white, vertical lines
appear in the preview image, or colors of the preview image and the original vary a
lot. This allows you to adjust and compensate for variations which can occur in the
optical component over time by its nature.
To do this, please run the Scanner Utility program as described below:
1. Click on the Windows START button, then choose PROGRAMS, USB
SCANNER and then SCANNER UTILITY.
2. Click on the “Calibrate” button to start this calibration process to
produce more accurate or desirable output.

Aligning the Scanner

In most cases, the scanner doesn’t need to be aligned but there are instances
when the alignment might be required. You need to align the scanner only if parts of
the scanned document are missing from any of its edges. For example, the heading of
a document might be missing from the top edge after the document has been scanned.
To align the scanner, follow the steps below:
1. Place a photograph on the top right side of the scanner glass (near the back of
the scanner). Please note that only part of the photograph will be scanned.

2. Click on the SCAN button . Part of the photograph will be displayed

in the ALIGNMENT window.
3. Click on the ALIGN POSITION buttons until the top left corner of the
scanned photograph aligns with the top left corner of the preview window.

4. Click on the check mark button when the alignment has been
completed.

13
Maintenance

To keep your scanner working smoothly, take a moment to review

Caution the following maintenance tips.

• Avoid using the scanner in a dusty environment. When it is not in use, keep the
scanner covered. Dust particles and other foreign objects may damage the unit.
• Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
• Do not subject the scanner to excessive vibration. It may damage the internal
components.
• Be sure not to bump or knock the scanner glass as it is fragile and could break.
• Clean the scanner glass by lightly spraying a non-abrasive glass cleaner onto a
soft lint-free cloth. Then, wipe the glass thoroughly with the cloth. DO NOT
SPRAY CLEANER DIRECTLY ONTO THE SCANNER GLASS. Excess liquid
residue may fog or damage the scanner.
• Your scanner operates best in temperatures between 10° C to 40° C (50° F to 104°
F).

14
 Appendix A: Troubleshooting

Scanning Problems
Most problems are easily solved, and some of the most common questions and
their recommended solutions are listed below. If your computer cannot receive images
from the scanner, please refer to the Scanner Utility section of this manual before you
proceed.

Symptom: After following the installation instructions, my computer cannot

find the scanner.
Cause 1: Some aspect of your computer system does not support USB.
Solution 1: Download and execute the file USBREADY.EXE at
http://www.usb.org/faq.html to determine the level of your computer’s
USB support.

Cause 2: USB is not enabled in your BIOS settings.

Solution 2: Enable the USB controller in your BIOS settings. This is typically
done by pressing a key7 (usually <del>, <F1> or <F10>) during startup.
In the BIOS Settings screen that appears, find the option for USB and
enable it. Exit and Save the changes you made. Your computer is
rebooted automatically. Please consult your computer vendor before
attempting to do this change.

Cause 3: The USB controller was improperly installed on your computer.

Solution 3: To reinstall the USB controller, click on the Start button, choose
Settings and select Control Panel. In the window that opens, double-
click on the Add New Hardware icon. Carefully follow the instructions
that appear on your screen.

Symptom: The scanned image looks grainy on the screen.

Cause: Your video mode is not set to show more than 256 colors.
Solution: We recommend that you set your video mode to 16 bits per pixel
(65536 colors) or higher. Please consult your video card, computer or
Windows documentation to change the video mode.

Symptom: The scanner scans very slow.

Cause 1: You are running other applications in the background.
Solution1: Close all the other applications that are running in the background.

7
Please consult your computer manual on how to modify your BIOS/CMOS settings.

15
Cause 2: You are scanning at a high resolution (DPI).
Solution 2: Reduce the resolution. See Chapter 2 of the Software User’s Guide for
information about recommended resolution settings.

Symptom: The scanned document comes out as strange characters on the

screen after the OCR process is completed.
Cause 1: Text page was scanned upside down.
Solution 1: Reverse the page and scan again.

Cause 2: The OCR software is limited to certain types of documents, fonts and
formats. You might be trying to scan a form, spread sheet, a hand
written letter or a document with color text or color page.
Solution 2: Scan a clean document that contains, preferably, one column and has
black text on a white page.

Symptom: The scanner is not in the list of supported scanners in other

commercial software.
Solution: Select TWAIN as the scanner.

Symptom: Unable to scan from other software other than the one that came
with the scanner.
Solution: Enter the Scanner Setup within the program, Select TWAIN and you
will see your scanner listed (e.g., USB Scanner).

Symptom: Unable to save to a floppy diskette.

Cause 1: The floppy disk might be write protected.
Solution 1: Move the write protection tab, located in the back of the diskette, to the
closed position.

Cause 2: Your disk might not be formatted.

Solution 2: Format the diskette.

Cause 3: There is not enough space available in the disk to save the document.
Solution 3: Delete any files that you do not need from the floppy disk.

Cause 4: You might be scanning your document at a high resolution.

Documents scanned using higher resolution modes will take a
considerable amount of disk space.
Solution 4: Reduce the resolution. See Chapter 2 of the Software User’s Guide for
information about recommended resolution settings.

16
Symptom: The image looks good in the software that came with the scanner
but it does not look good when I export the image to another
program.
Cause: Different imaging programs use different Monitor Gamma settings.
Solution: Change the Monitor Gamma settings in either of the programs so that
they match. Please consult the help files for each program to find out
how to adjust the Monitor Gamma.

Symptom: The image looks good in the screen but is very dark when printed.
Cause1: The Monitor Gamma Settings or the scanner brightness settings are not
set properly.
Solution 1: 1) Change the Monitor Gamma to a value between 1.0 and 1.5. Please
consult your help file for information on how to adjust the Monitor
Gamma.
2) Adjust the brightness control in the TWAIN window before
scanning.

Cause2: The printer brightness setting is not set properly.

Solution 2: Adjust the brightness in the printer. Some printers allow you to change
the brightness settings. Please consult your printer documentation.

Symptom: The scanned image takes too long to be sent with an email message.
Cause1: The image was scanned at a high resolution or is physically large.
Solution1: Scan at a lower resolution (DPI)

Cause 2: The Internet might be congested.

Solution 2: Try sending the message at a later time.

Symptom: The image that I sent through email looks good in my computer
but it looks dark in the recipient computer.
Solution: The Monitor gamma settings should be approximately the same in your
and the recipient computer.

Symptom: There is a grinding or rattling noise at the beginning of each scan.

Cause: The scanner engages the gears and it initializes itself before scanning.
Solution: This noise is normal to the operation of the scanner.

Symptom: A. -Disk is full- error is displayed when I click on the scan button.
Cause: Your computer is running low in resources. Your computer hard disk
drive does not have enough space to process the image. This may be
because you are scanning at too high of a resolution.
Solution: Obtain a larger hard disk or rescan at a lower resolution.

17
Symptom: A -Disk I/O error- message is displayed.
Cause 1: This error is caused if the hard disk drive does not have enough space
available to process the image.
Solution 1: Make some space available in the hard disk drive by deleting any
programs or files that you do not need.

Cause 2: Your hard disk drive might be heavily fragmented or it might contain
some bad sectors.
Solution 2: Run the Scan Disk utility that came with your Windows computer.
Please consult your computer documentation or the Windows help files
on how to run the Scan Disk Utility.

Symptom: The error “Scanner not Found” that is displayed.

Cause 1: The USB cables are not connected properly.
Solution 1: Make sure that the cables are connected tightly and to the proper port.

Cause 2: The USB cable might be too long.

Solution 2: Please use the USB cable that comes with your scanner.

Cause 3: The scanner’s power cord is not connected properly.

Solution 3: Make sure that the AC adapter is connected to an outlet. If the scanner
is connected to a Surge Protector, make sure that the Surge Protector is
turned on.

Common -How-to- Questions

Symptom: How do I save the scanned image in JPG format?
Solution: In the Image-editor, click on FILE
1) Click on SAVE AS.
2) Select the folder where you want to save your image.
3) Select JPEG or JPG under Save as type:
4) Type the name of the file name for your image.

Symptom: How do I cut an image and paste in another program?

Solution: 1) Select the area that you want to cut.
2) Click on EDIT.
3) Click on CUT.
4) Start the program and open the document where you want to paste
your image.
5) Click on EDIT.
6) Click on PASTE.

18
 Please consult your program documentation on how to Cut and Paste if
you have any more questions.

Symptom: How do I place a scanned image into my Word Processor?

Solution: 1) Find out what formats are supported by your Word Processor.
2) Write the name and the location of the file before you save it.
3) Save in a format supported by your Word Processor.
4) Depending on your Word Processor, select INSERT or IMPORT
from your menu, then select IMAGE or PICTURE.
Consult your Word Processor documentation for more information on
how to import images.

Symptom: How do I put my scanned text document in my Word Processor?

Solution: 1) Find out what formats are supported by your Word Processor.
2) Save in a format supported by your Word Processor.
3) Open the file that you saved from your Word Processor.

Symptom: How do I send a scanned image using my email program?

Solution: Save your scanned image in a format that is supported by your email
program (JPG, GIF or PNG are recommended). Once your picture is
saved, consult the documentation of your email program on how to
attach a file to a message.

19
 Appendix B: Specifications8
Physical
373 x 256 x 32 mm (14.69” x 10.08” x 1.26”)
dimensions
Weight 1.4 Kgs (3.1 Lbs)
Operating
10° C to 40° C (50° F to 104° F)
Temperature
Max. Scan Area Reflective: 216 mm x 297 mm (8.5 x 11.69 in.)
Scan Method Single-Pass
Color: Input 48-it; Output 24/48-bit
Scan Modes Grayscale: Input 16-bit; Output 8/16-bit
Black & White: 1-bit
Optical Resolution: 600 dpi
Max. Hardware Resolution: 600 dpi (main scan) x 1200 dpi
Resolution
(sub scan)
Max. Interpolated Resolution: 19200 dpi
Scanning
Reflective color or black-and-white originals
Materials
Protocols TWAIN Compliant
Connection USB Port
Light Source Three-colour RGB LEDs
Power Powered through USB port
Requirements No AC adapter required
Power Operation: 2.5 watts maximum
Consumption Idle: 1.0 watts
EMI FCC Class B

8
Hardware specifications may change at any time without prior notice.

20
 Appendix C: Customer Service and
Warranty
If you encounter problems with your scanner, please review the installation
instructions and troubleshooting suggestions contained in this guide.
For further assistance call our customer support phone number listed on the last
page of this guide. One of our representatives will be happy to assist you from
Monday through Friday in office working hours as shown below:
Europe 9:00 a.m. – 5:30 p.m.
Other Countries or Areas 9:00 a.m. – 6:00 p.m. Taiwan Time
To avoid delays, please have the following information available before calling:
• Scanner name and model number
• Scanner serial number (located at rear of scanner near port connectors)
• A detailed description of the problem
• Your computer manufacturer and its model number
• The speed of your CPU (Pentium 133, etc.)
• Your current operating system and BIOS (optional)
• Name of software package(s), version or release number and manufacturer
of the software
• Other USB devices installed

Statement of Limited Warranty

This Statement of Limited Warranty applies only to the options you originally
purchase for your use, and not for resale, from an authorized reseller.
The manufacturer warranty includes all parts and labor, and is not valid without
the receipt of original purchase. To obtain warranty service, you may contact the
authorized dealer or distributor, or visit our website to check out the available service
information, or send a request via E-mail for further help.
If you transfer this product to another user, warranty service is available to that
user for the remainder of the warranty period. You should give your proof of purchase
and this statement to that user.
We warrant that this machine will be in good working order and will conform to
its functional descriptions in the documentation provided. Upon provision of proof of
purchase, replacement parts assume the remaining warranty of the parts they replace.
Before presenting this product for warranty service, you must remove all
programmes, data and removable storage media. Products returned without guides and
software will be replaced without guides and software.

21
 This Limited Warranty service does not provide for carry-in exchange when the
problem results from accident, disaster, vandalism, misuse, abuse, unsuitable
environment, programme modification, another machine or non-vendor modification
for this product.
If this product is an optional feature, this Limited Warranty applies only when
the feature is used in a machine for which it was designed.
If you have any questions about your Limited Warranty, contact the approved
retailer from whom you bought the product or the manufacturer.
THIS LIMITED WARRANTY REPLACES ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABLITY AND FITNESS FOR A PARTICULAR
PURPOSE. HOWEVER, SOME LAWS DO NOT ALLOW THE EXCLUSION OF
IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND
IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD. NO OTHER WARRANTIES APPLY AFTER THAT PERIOD.
Some jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply.
Under no circumstances are we liable for any of the following:
1. Third party claims against you for losses or damages.
2. Loss of, or damage to, your records or data; or
3. Economic consequential damages (including lost profits or savings) or
incidental damages, even if we are informed of their possibility.
Some jurisdictions do not allow the exclusion or limitations of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have
other rights that vary from jurisdiction to jurisdiction.

FCC Radio Frequency Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular television reception (which can be
determined by turning the equipment off and on), the user is encouraged to try to
correct the interference by one or more of the following measures:
√ Reorient or relocate the receiving antenna.

22
√ Increase the separation between the equipment and receiver.

√ Connect the equipment to an outlet on a circuit different from that which the
receiver is connected.
√ Shielded interconnect cables and shielded power cord which are supplied with this
equipment must be employed with this equipment to ensure compliance with the
pertinent RF emission limits governing this device.
√ Consult the dealer or an experienced radio/TV technician for help if the conditions
persist.
√ Changes or modifications not expressly approved by the manufacturer or authorized
service center could void the user’s authority to operate this equipment.

23