Scribd
Upload
50 views

Principles of Design Thinking Tinkercad 1

This document provides instructions for a series of Tinkercad tutorials to develop a "Pobble BEAUX: Carrier Bag Reuse Container" to help eliminate single-use plastic bags. The tutorials cover duplicating a hollow cylinder part, creating a hole in the duplicate part, adding text to one of the parts, and locking both parts to prevent further editing. The overall goal is to take ideas from the design thinking process and make them into a physical prototype using Tinkercad.

Uploaded by

Carlos Ortega
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

Principles of Design Thinking Tinkercad 1

This document provides instructions for a series of Tinkercad tutorials to develop a "Pobble BEAUX: Carrier Bag Reuse Container" to help eliminate single-use plastic bags. The tutorials cover duplicating a hollow cylinder part, creating a hole in the duplicate part, adding text to one of the parts, and locking both parts to prevent further editing. The overall goal is to take ideas from the design thinking process and make them into a physical prototype using Tinkercad.

Uploaded by

Carlos Ortega
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Principles of Design Thinking: Tinkercad

Print Guide

Abstract
The Principles of Design Thinking are problem-solving skills that are transforming professions from
entertainment to international development. Integral to thinking design thinking process cycle is the
prototyping stage, which is when ideas become a physical reality. Whether you’re an engineer,
machinist, maker, artist, teacher, student, or just plain curious, the following beginner level series of
Tinkercad demonstration tutorials focuses on developing the Pobble BEAUX: Carrier Bag Reuse
Container to help eliminate single-use plastic bags.

Principles of Design Thinking 1


Tinkercad
Lesson 3: Create a Duplicate hollowed Pobble part .......................................... 3
Step 1: Duplicate the part .......................................................................................................... 3

Lesson 4: Create a hole in the Duplicate Pobble part .................................................................... 5


Step 1: Create the hole .............................................................................................................. 5

Lesson 5: Add text to the Pobble part. .......................................................................................... 8


Step 1: Select the Stencil text from Script Community Shape Generator ..................................... 8
Step 2: Position and cut the text from Pobble. ........................................................................... 9

Lesson 6: Lock both Pobble parts to prevent further edits. ......................................................... 11


Step 1: Lock the original Pobble part ........................................................................................ 11
Step 2: Lock the duplicate Pobble part. .................................................................................... 12

Principles of Design Thinking 2


Tinkercad
Lesson 3: Create a Duplicate hollowed Pobble part
Watch the video to learn how to duplicate parts in using Tinkercad.

After completing this lesson, you will be able to:

• Use Tinkercad to create a duplicate of the hollowed cylinder part.

Step 1: Duplicate the part


1. Click the hollow Pobble part to select it.

2. In the toolbar, click Duplicate (Ctrl + D)

3. Click and drag to move the duplicate Pobble part to empty space.

Principles of Design Thinking 3


Tinkercad
4. Click and drag to move the original Pobble part to empty space.

Principles of Design Thinking 4


Tinkercad
Lesson 4: Create a hole in the Duplicate Pobble part
Watch the video to learn how to create the hole in Pobble to insert and remove bags.

After completing this lesson, you will be able to:

• Create and cut a hole in the Pobble part.


• Use Tinkercad to align and group parts.

Step 1: Create the hole


1. Click and drag a cylinder (hole) on to the workplane as near to the duplicate Pobble part as
possible.

2. Click and drag cylinder (hole) to 35 mm length, 35 mm width and 30 mm height or enter the
values directly.

Principles of Design Thinking 5


Tinkercad
3. Click to select the duplicate pobble part and the cylinder (hole).

4. In the SubNav bar, click Align.

5. Click the black dot to Align the Pobble part with the cylinder (hole) by length.

6. In the View Tools, click to switch to Orthographic view.

Principles of Design Thinking 6


Tinkercad
7. Click and drag cylinder (hole) to desired location.

8. Drag a selection window to select all parts

9. Click to Group. The hole will also be cut.

Principles of Design Thinking 7


Tinkercad
Lesson 5: Add text to the Pobble part.
Watch this video to learn how to add text to Pobble.

After completing this lesson, you will be able to:

• Position and add text to Pobble Using Tinkercad.


•
Step 1: Select the Stencil text from Script Community Shape Generator
1. In the Shapes panel, click Shapes Panel then click to select Community Shape generators.

2. Scroll through, locate and click to select the ‘Script’ shape generator and drag on to the
workplane as near to the original (first) Pobble part as possible.

Select Script

Drag here

3. Click Top on the ViewCube and in the inspector; change the Font from Script to Stencil, enter
BEAUX (pet’s name) or other text and change the Height to 30.

Choose Stencil

Type text

Enter 30

Principles of Design Thinking 8


Tinkercad
Step 2: Position and cut the text from Pobble.
1. Click and drag the new text to the Pobble part.

2. Select the new text and the Pobble part.

3. In the SubNav bar, click Align.

4. Click the black dot to align the text width to the Pobble part.

Click

Principles of Design Thinking 9


Tinkercad
5. Click to select the BEAUX text.

6. In the Inspector click Hole.

Click

7. Select all the text and Pobble part and in the SubNav bar, click Group.

8. All the elements will be grouped and the text will also be cut from the Pobble part.

Principles of Design Thinking 10


Tinkercad
Lesson 6: Lock both Pobble parts to prevent further edits.
Watch this video to learn how to lock parts to prevent editing in Tinkercad.

After completing this lesson, you will be able to:

• Lock parts to prevent editing using Tinkercad.

Step 1: Lock the original Pobble part


1. Click to select the part.

Click

2. Click to Lock Editing (Ctrl + C)

Click

Principles of Design Thinking 11


Tinkercad
Step 2: Lock the duplicate Pobble part.
1. Click to select the part.

Click

2. Click to Lock Editing (Ctrl + C)

Click

Principles of Design Thinking 12


Tinkercad

You might also like