Buy 1 Get 1 FREE O er Ends in 11:55:37

U a

Blue Prism
installation(Server) –
Setup of Blue prism
software and cost

Blue Prism Application Server

There are a number of steps to configure the installation to take

on the role of a Blue Prism Application Server.

It is typical for a single Blue Prism Application Server to be

configured; there is the option to multiple Application Server
situations on a distributed server.

The following actions are expected to each Blue Prism

Application Server services:

1. Confirm that the database frames have configured

Its Aleem again, Sorry tofor theyou. We
disturb
are starting an Instructor Led session.
environment and that Blue Prism has installed
Would on thetodevice.
you be interested join?  I can send
you the link

2. Configure the service using the BPServer.exe tool.

Type to chat now
3. Register
Buy 1a Get
Windows Service
1 FREE O erthat
Endsreferences the above service
in 11:55:37
configuration.

4. Configure the start-up and login settings for the Windows

Service.

Administrator access will typically be required to complete

these steps.

Confirm that the database settings and that Blue Prism has
been installed.

Preceding to configuring a Blue Prism Application Server,

beginning assure that Blue Prism has been installed on the
device being configured and Blue Prism database link has been
configured on the machine for the environment.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Configure the Server Service Profile:

Blue Prism services are configured using BPServer.exe. This

application is presented as part of the Blue Prism installation
and is used to define and configure the services that are
available on a given server.

The configuration service also includes:

Determining the port on which it will work.

Defining the database contact information.
Configuring a credentials key which is applied to all data
encryption.

Navigate to the installation directory, typically from C:\Program

Files\Blue Prism Limited\Blue Prism launch and Automate
BPServer.exe.

Click New to create a server configuration.

Its Aleem again, Sorry to disturb you. We
are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Give the name which is to be used for the configuration. If we

are configuring a single Blue Prism Application service on a
given server, then the server configuration should be named:
Default.

Choose the database connection which should be used by the

server. The gate can normally be left as default for a single
server but can be altered if necessary.

Click on Next.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Select the Key Store tab and click on New. Enter Credentials Key
as the scheme name. If this is the first Application Server that is
being configured for the environment, then select AES-256 as
the encryption method and click Generate Key followed by OK.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
If a Server has already set up for this environment enter
you the link the

Credentials Key which is used for the other Application Server –

this key is used to encrypt credentials
Type in the now
to chat Blue Prism.
Use secure
Buy 1connections
Get 1 FREEcan
O ONLY be ticked
er Ends if all Blue Prism
in 11:55:37
components will be installed within the Active Directory
network.

Secure connections MUST be ticked if using Active Directory

authenticated for Blue Prism – using AD authentication over an
unsecured connection will be the platform, which will not be
able to apply for the user’s permissions.

If the server is running on a machine with multiple IP addresses,

enter the address which the server should listen on for Blue
Prism Resource Connections.

Where multiple Application services are to be hosted on a single

OS, create multiple profiles assuring that the Listening port and
IP Address combination is unique for some environment.

To enable status information to be sent to the Windows Event

Log. When demanding to run the BP Server as a service, so it is
desirable to install it.

When arrangement for the particular service is completed, click

OK, then click the Save Configuration to save all server
configurations.

Register and Configure a Windows Service:

In Blue Prism installation, a Server Windows Service is

Its Aleem again, Sorry to disturb you. We
automatically registered for a server configuration with the
are starting an Instructor Led session.
name Default. Would you be interested to join?  I can send
you the link

Hence if it corresponds to the chosen name for the

Type is
configuration, no additional operation to expected
chat now to register the
service.
Buy 1 Get 1 FREE O er Ends in 11:55:37

If the server has been configured as Default, it is required to

register manually to a Windows Service for every configuration.

Setup the Windows Services:

For server configuration, a windows service can be created

using SC create, excluding Default which is automatically
configured.

sc create {SERVICENAME} binPath= “[Blue Prism Install

Location]\BPServerService.exe {CONFIGURATIONNAME}”

Optionally disable the automatic initiation of a Runtime

Resource:

It is not easy for a user to directly log into Blue Prism on the
Application Server, however, there will be a default setting
which automatically starts a Runtime Resource on the machine
after login. These settings will be disabled within the System
tab.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

Configure
Buy the Windows
1 Get 1 FREEService:
O er Ends in 11:55:37

After creating Application server, the Windows Service is

configured for the environment.

The main settings to be composed are:

• Start-up by default to set to Manual however it is

recommended for most environments that should be set to
Automatic.

• Log into the default account used by Blue Prism Local System
which can be configured. The Windows Authentication is used
for database statement; it is the account specified will be used
by the service while connecting to the database.

When starting the service, if it stops directly, indicates a

configuration problem by showing information in Windows
Event Viewer, in the Application log which also provides further
notice about the problem.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Blue Prism Interactive Client:

The following steps are required for each Blue Prism Interactive
Client:

Disable the introduction of a Runtime Resource on the device.

1. Verify the database settings have been configured for the

environment and the Blue Prism has been installed on the
device.
2. Ensure the Blue Prism Connection on the device is to the
Application Server. Its Aleem again, Sorry to disturb you. We
3. Secure connections MUST be tickedare if Active Directory
starting an Instructor Led session.
confirmed for Blue Prism by using AD authentication
Would you be interestedover an
to join?  I can send
you the link
unsecured link which will mean the platform will not be able to
apply correctly for the user’s support.
Type to chat now
Verify the database settings and Blue Prism installation:
Buy 1 Get 1 FREE O er Ends in 11:55:37

Before configuring an Interactive Client, it is required to ensure

that Blue Prism has been installed on the system and is
configured for the environment by adding component.

Create a Blue Prism connection through the Application

Server:

Blue Prism Application Server is being deployed as part of the

environment, Blue Prism installations for Runtime Resources
and Interactive Clients are typically configured to connect via
the Blue Prism Server rather than directly to the database.

If Blue Prism Application is not deployed in the environment the

connection needs to be direct to the database.

These instructions give guidance on creating a Connection to

the Server Application.

1. Click on Configure. This will launch the wizard that can be

used to provide the connection.
2. The Connection Configuration window should now be
performed.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Give the details as below:

Connection Name: Application Server

Connection Type: Blue Prism Server

Blue Prism Server: [server name of the Application Server]

Server Port: Default: 8199

Call-back Port: 0 (zero is the default and indicates that dynamic

ports)

Use Secure Connection: Use secure connection can ONLY be

selected if all Blue Prism components will be installed within a
single Active Directory domain.

3. Press Test Connection to verify the correct settings.

Its Aleem again, Sorry to disturb you. We
are starting an Instructor Led session.
4. Press OK to save the data and return
Wouldto the
you Blue Prism
be interested client.
to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Blue Prism Runtime Resource:

The following steps are required to configure a Blue Prism

installation to take a role of a Runtime Resource:

1. Verify the database settings have been configured for the

environment and that Blue Prism has been installed on the
device.
2. Ensure the Blue Prism Connection on the device to the
Application Server.
3. Active Directory integrated for BlueItsare
Aleem again, Sorry to disturb you. We
Prism by using AD
starting an Instructor Led session.
authentication over an unsecured connection
Would you be will be the
interested to join?  I can send
platform and will not be able to apply for the user’s permissions.
you the link

4. Select a user report to the machine and configure the profile

including configuring remote access settings.
Type to chat now
5. Verify connection to the business applications and implement
Buy 1 Get 1 FREE O er Ends in 11:55:37
start-up configuration.

Disable the automatic initiation of a Runtime Resource

Optionally:

Blue Prism Clients are configured individually depending on the

client will be used for development and test objects.

An Interactive Client is used in Non-Production Environments

for developing processes will be essential to the business
applications that are automated as part of a Blue Prism
process.
Production Environments Where Interactive Clients are used
only for controlling and developing, their direct connectivity
may not be required for the business applications.
There is a default setting within Blue Prism which will
automatically start a Runtime Resource on the same machine
as the Interactive Client

This setting can be impaired within the System tab.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Configure the user profile and Assign a user account to the

Type to chat now
device:
It is confirmed to a1 user
Buy 1 Get FREEshould
O erbe assigned
Ends to each Blue Prism
in 11:55:37
Runtime Resource.

The Blue Prism Infrastructure provides information in deciding

the suitable type of login account to use and the implications.

Once decided, the user profile should be configured to address

the considerations within the Blue Prism.

This includes:

Regional Settings
Screensaver and auto-lock
Default remote access settings
Power Saver options

Verify connectivity to line of business applications:

The Runtime Resources need to be configured with the

appropriate connectivity and client to allow interaction with the
user interface of the applications as part of Blue Prism process.

The Advanced Topics should be evaluated for additional

information as the requirement for Blue Prism to associate with
Java-based forms.

Implement start-up configuration:

There are two main actions that are required for Blue Prism
Runtime Resource : Its Aleem again, Sorry to disturb you. We
are starting an Instructor Led session.
Would you be interested to join?  I can send
Blue Prism Runtime Resource must be logged youinthe
tolink
allow a
process to be run. Selections may be added manually into
these resources by following a reboot.
Type to chat now
 In order to run in Runtime Resource mode, a command line
Buy 1 Get 1 FREE O er Ends in 11:55:37
process is used to launch the application to accept and run
processes received from the Scheduler and Control Room.
Placing the commands in a round file allows a simple
procedure and also provides the versatility to start-up
automatically.

The command line method is:

[Blue Prism Install Location]\automate.exe /resourcepc /public

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public

Where there is a requirement to configure multiple Blue Prism

Runtime Resources on a single device, the start-up
configuration can be modified to start up a number of different
runtime instances – each configured to operate on a different
port. Further information about this configuration is provided in
the Blue Prism Infrastructure Guide.

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8001

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8002

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8003
Its Aleem again, Sorry to disturb you. We
are starting an Instructor Led session.
If there is a requirement for the Resource to use a specific
Would you be interested to join?  I can send
named connection to the database or application youserver
the link (such

as where call back ports are defined statically), the /dbconname

switch can be used: Type to chat now
[Blue Prism
Buy 1Install
Get 1Location]\automate.exe /resourcepc /public
FREE O er Ends in 11:55:37
/port [port] /dbconname [Connection Name]

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8001
/dbconname “Production 001”

If an appropriate certificate has been deployed locally on the

Resource the /sslcert switch can be used to apply certificate-
based encryption to all communication :

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8181
/sslcert [Certificate Thumprint]

“C:\Program Files\Blue Prism Limited\Blue Prism

Automate\automate.exe” /resourcepc /public /port 8181
/sslcert 33a4d8aa6a3d57b04c10eb32278d8a8612ffae9d

Configure Active Directory Users and Roles:

After creating a database with the suitable settings the Active

Directory authentication should be used for the Blue Prism
platform, the roles and users must be initialized within the Blue
Prism product, as defined in the below steps:

1. Click on System Manager.

2. Click Security and assure the UsersItstab is again,

Aleem displayed.
Sorry to disturb you. We
are starting an Instructor Led session.
Would you be interested to join?  I can send
3. From the left-hand menu select Manage UseryouRoles. the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

1. Select each role one by one from the left. Enter the similar
Active Directory group in the text field provided. The values
registered including case should match the name of the Active
Directory group exactly.

Depending on your Active Directory network’s configuration, we

are able to browse for the identical group using the buttons at
the edit field.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now

 Buy 1 Get 1 FREE O er Ends in 11:55:37

Mahesh J
Author
Hello all! I’m a nature’s child, who loves the wild, bringing technical knowledge to you
restyled.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Trackbacks/Pingbacks Type to chat now

 1. Blue Prism Training - The only RPA Course you need - CloudFoundation - […] Blue Prism
Buy 1 Get 1 FREE O er Ends in 11:55:37
installation(Server) – Setup of Blue prism software and cost […]

This site uses Akismet to reduce spam. Learn how your comment data is processed.

   
Created & Designed by Team CloudFoundation

More than one instance of Sumo is attempting to start on this page. Please check that you are only loading Sumo
once per page.

Its Aleem again, Sorry to disturb you. We

are starting an Instructor Led session.
Would you be interested to join?  I can send
you the link

Type to chat now