Scribd
Upload
126 views

Content On Myrouter - Local

1. Launch a web browser like Internet Explorer, Google Chrome or Mozilla Firefox and type myrouter.local in the address bar at the top of the browser window. Then press the enter key. for more info visit: https://myroute-local.in/

Uploaded by

tlinkrepeate
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
126 views

Content On Myrouter - Local

1. Launch a web browser like Internet Explorer, Google Chrome or Mozilla Firefox and type myrouter.local in the address bar at the top of the browser window. Then press the enter key. for more info visit: https://myroute-local.in/

Uploaded by

tlinkrepeate
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Content on myrouter.

local

Use of myrouter.local address to easily setup the Linksys router

Firstly, we need to know about what is this myrouter.local? Myrouter.local is basically a local
address that is given to you with the router by its manufacturer and is used to configure the
Linksys router. Different routers have different local addresses provided by their manufacturers.
You can change all the settings such as parental control, guest network, changing username and
password of the router with the help of myrouter.local.

By using the myrouter.local address, you will be able to land to the configuration page of the
Linksys router. You have to then log in with username and password to configure the settings.
Myrouter.local is not only used to change the settings but also to setup the router if installation
CD is not working properly or you are getting a problem in setting up the router with CD. You
can also use myrouter.local for the settings of a range of extenders developed by Linksys.
Extenders are the devices that are used to extend the coverage or range of the routers. If you are
getting the problem from one room to other in accessing the internet then you can go for
extenders.

After login to the myrouter.local, the following mentioned configurations you


can generate:

Here we have mentioned a list of configuration settings you can perform by accessing
myrouter.local. One thing to note here is that myrouter.local is the access point for Linksys
router only and not of any other website. You are not able to access any other website using
myrouter.local.

 It is the local address provided by the manufacturer for Linksys router login.
 You will be able to install Linksys router using access point of myrouter.local.
 After login to myrouter.local address, you will be able to setup Linksys router.
 You can remotely access Linksys router with the help of myrouter.local.
 You can also change the username and password using this local address.
 Local access point for Linksys router configuration.
Parental control and Nat settings can also be done through the myrouter.local address.

How to reset the Linksys router by using the local address myrouter.local?

Many times there can be a situation when you have to reset the router. As an instance when you
forgot the username and password (login details) of the existing router. The only possible
solution, in this case, is to reset the router to the default settings or you can say factory restore
mode. After completing the process of resetting, you are able to login via default username and
password of the Linksys router.

Steps you need to follow so as to reset the router:

1. Connect Linksys router and the computer system that you will use to reset through an
Ethernet cable. One end of the cable is connected to the router and another end to the
computer system.
2. Launch a web browser like Internet Explorer, Google Chrome or Mozilla Firefox and
type myrouter.local in the address bar at the top of the browser window. Then press the
enter key.
3. Enter the username and password you have set for the Linksys router in the respective
fields and click on the login button or press enter.
4. After this, go for the Administration Option.
5. Choose the factory default option here to successfully reset the Linksys router to default
factory settings.

You might also like