Scribd
Upload
510 views1 page

Department of Mechanical Engineering: CAD/CAM Lab Safety Rules For Protecting Equipment

The document outlines safety rules and guidelines for a CAD/CAM lab at Galgotias University. The rules include not bringing food or drinks near machines, turning off machines when done, scanning external devices for viruses, keeping the room cool to prevent overheating, avoiding touching circuit boards or sockets of powered devices, and maintaining backups of important files. General safety guidelines state that users must follow staff instructions, food and drink are prohibited, equipment should not be tampered with or repaired, correct ergonomic posture should be used, and fellow users and equipment should be treated with care and respect.

Uploaded by

Manoj Shukla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
510 views1 page

Department of Mechanical Engineering: CAD/CAM Lab Safety Rules For Protecting Equipment

The document outlines safety rules and guidelines for a CAD/CAM lab at Galgotias University. The rules include not bringing food or drinks near machines, turning off machines when done, scanning external devices for viruses, keeping the room cool to prevent overheating, avoiding touching circuit boards or sockets of powered devices, and maintaining backups of important files. General safety guidelines state that users must follow staff instructions, food and drink are prohibited, equipment should not be tampered with or repaired, correct ergonomic posture should be used, and fellow users and equipment should be treated with care and respect.

Uploaded by

Manoj Shukla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF MECHANICAL ENGINEERING

GALGOTIAS UNIVERSITY
GREATER NOIDA

CAD/CAM Lab Safety Rules for Protecting Equipment


 Do not bring any food or drinks near the machine.
 Turn off the machine once you are done using it.
 Do not plug in external devices without scanning them for computer
viruses.
 Ensure that the temperature in the room stays cool, since there are a lot of
machines inside a lab as these can overheat easily. This is one of the many
ways of ensuring computer safety.
 Try not to touch any of the circuit boards and power sockets when a device
is connected to them and switched on.
 Always maintain an extra copy of all your important data files.

General Safety Guidelines to be followed at all times


 All users of the laboratory are to follow the directions of
Academic/Laboratory Technician staff member.
 Food or drink is not permitted at any time in the laboratory.
 Students should not attempt to repair, open, tamper or interfere with any of
the computer, printing, cabling, air conditioning or other equipment in the
laboratory.
 Students should be aware of office ergonomic guidelines for correct posture
when using computer equipment.
 Please treat fellow users of the laboratory, and all equipment within the
laboratory, with the appropriate level of care and respect.

You might also like