Broadcast Antenna Systems

for FM, TV, MMDS, DAB and DVB

Photo on title page: Antenna System with 12 bays for DVB-T.

Catalogue Issue 06/2007

Kathrein Plant IV near Rosenheim, Germany

Kathrein Broadcast Antennas

Kathrein is one of the world’s leading manufacturers of professional broadcast antenna

systems, including a full range of transmitting antennas for FM, TV, MMDS, DAB and
DVB broadcasting.

KATHREIN-Werke KG was founded in 1919 in Rosenheim, Germany, to produce

antennas and lightning protection equipment.

Since 1955 Kathrein has been supplying professional antenna systems of all sizes to
broadcasters in every part of the world, from Canada to China and from Norway to South
Africa.

Right from the start Kathrein has maintained a high level of engineering capability.
Today there is a team of antenna and mechanical engineers dealing exclusively with
broadcast transmitting antennas.
This highly qualified engineering team is responsible for:

– Design of components (antennas, power splitters, etc.).

– Design and optimization of complete antenna systems.

– Installation and testing of antenna systems.

– Project management.

Kathrein can provide turn-key installations in cooperation with other contractors or using
the customer’s installation personnel.

Customers are welcome to take advantage of the technical expertise available from
Kathrein and to discuss their specific requirements. If your needs cannot be met with
our standard components we are prepared to develop special solutions for you.

Kathrein’s quality management system is certified in accordance with ISO 9001, which
includes not only all manufacturing operations, but also design processes.

“Quality leads the way”

As the world’s oldest and largest antenna manufacturer, we live up to our claim “Quality
leads the way” on a daily basis. One of the fundamental principles is to always be on the
lookout for the best solution for our customer.

Our quality assurance system and our environmental management system apply to the
entire company and are certified by TÜV according to EN ISO 9001 and EN ISO 14001.

3
 Please note:
As a result of more stringent legal regulations and judgements regarding product
liability, we are obliged to point out certain risks that may arise when products are
used under extraordinary operating conditions.

The mechanical design is based on the environmental conditions as stipulated in

ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by
wind at maximum velocity.

Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress

(e.g. strain caused by oscillating support structures), may result in the breakage of an
antenna or even cause it to fall to the ground.

These facts must be considered during the site planning process.

The maximum wind velocities listed should be understood in the sense of working values
according to DIN and EN standards. These values include a safety factor below the
ultimate limit state (elastic limit or permanent deformation). For these wind velocities we
guarantee the mechanical safety and the electrical integrity of our antennas.

4
 Band I (VHF) Antenna Systems
47 ... 88 MHz

Band I (VHF) Antennas

47 ... 88 MHz

Band II (FM) Antenna Systems

Antenna Systems 87.5 – 108 MHz

The antenna systems listed are

examples of typical configurations. Band II (FM) Antennas
87.5 – 108 MHz
The mechanical and electrical data
can be used to estimate gain, size
and mechanical loads of a system.
Band III (VHF) Antenna Systems
The final configuration and technical 174 – 230 MHz
data of an individually designed
antenna system, meeting the
customer’s specific needs, will be
determined by the Kathrein engineers. Band III (VHF) Antennas
174 – 230 MHz

Antennas, Power Splitters and

Accessories Band IV/ V (UHF) Antenna Systems
The basic antennas and related com-
470 – 862 MHz
ponents shown in this catalog are only
a small portion of the Kathrein broad-
cast product line. Band IV/ V (UHF) Antennas
Many special versions are available, 470 – 862 MHz
with different connectors, higher power
ratings, and other features such as
special probes or extra ice protection.
L Band Antenna Systems
Your enquiries are most welcome and 1452 – 1492 MHz
we would like to discuss your special
requirements.
L Band Antennas
1452 – 1492 MHz

MMDS
2500 – 2700 MHz

Relay Receiving Antennas

and Special Antenna Systems

Power Splitters

Further Components

Technical Annex
Summary of Types

The articles are listed by type number in numerical order.

Type No. Page Type No. Page Type No. Page Type No. Page

715 ... 750 10060 108 751 10282 144 764 487 143

715 022 94 750 10062 109 751 10283 144 764 488 143

715 849 36 750 10082 100 764 489 143

750 10083 100 752 ... 764 491 143

732 ... 750 10085 73 752 183 38 764 493 143

732 319 157 750 10086 45 764 494 143

732 327 157 750 10094 128 754 ... 764 495 143

754 154 43 764 496 143

734 ... 750 101.. 764 497 143

734 360 157 750 10112 110 755 ... 764 499 143

734 361 157 750 10113 110 755 587 43

734 362 157 750 10114 110 765 ...

734 363 157 750 10115 110 757 ... 765 537 132

734 364 157 750 10116 110 757 629 43 765 814 143

734 365 157 750 10117 110 765 815 143

750 10118 110 759 ... 765 816 143

750 100.. 750 10120 111 759 044 158 765 817 143

750 10008 38 750 10122 111 759 13232 117 765 818 143

750 10012 103 750 10124 111 759 13851 116 765 819 143

750 10013 103 750 10125 111 759 14152 118 765 820 143

750 10016 102 750 10128 113 765 821 143

750 10017 102 750 10130 112 761 ... 765 822 143

750 10022 44 750 10131 112 761 327 105 765 823 143

750 10023 44 750 10132 112 765 824 143

750 10025 82 750 10183 40 762 ... 765 825 143

750 10026 82 750 10190 127 762 109 43 765 826 143

750 10031 102 750 10191 127 762 943 50 765 827 143

750 10032 102 750 10194 128 765 828 143

750 10033 75 763 ... 765 829 143

750 10034 51 751 ... 763 715 50

750 10035 51 751 10215 145 766 ...

750 10045 101 751 10216 145 764 ... 766 393 132

750 10046 101 751 10217 145 764 485 143 766 394 132

750 10047 101 751 10281 144 764 486 143 766 396 133

6
Summary of Types

The articles are listed by type number in numerical order.

Type No. Page Type No. Page Type No. Page Type No. Page

766 397 133 768 331 144 770 518 143 772 999 103

766 398 133 768 332 144 770 519 143

766 400 133 768 333 144 770 520 143 773 ...

766 401 133 768 334 144 770 521 143 773 000 103

766 402 133 768 335 144 770 652 121 773 332 103

766 404 133 768 336 144 770 653 124 773 333 103

766 405 133 768 340 144 770 721 129 773 361 80

766 406 133 768 341 144 770 722 129 773 643 70

766 614 84 768 342 144 770 732 120

768 343 144 770 733 120 774 ...

767 ... 768 344 144 770 776 49 774 038 95

767 006 106 768 345 144 770 777 49 774 039 95

767 141 70 768 476 41 770 793 120 774 040 95

767 194 132 768 494 75 770 794 120 774 041 95

767 195 132 770 795 120 774 046 95

767 196 132 769 ... 770 881 106 774 047 95

767 198 133 769 006 80 770 947 122 774 052 96

767 199 133 769 731 99 770 948 123 774 321 37

767 200 133

767 202 133 770 ... 771 ... 775 ...

767 203 133 770 144 143 771 038 130 775 000 53

767 204 133 770 145 143 771 304 107 775 001 53

767 206 133 770 146 143 771 870 129 775 002 53

767 207 133 770 147 143 771 917 126 775 130 50

767 208 133 770 148 143 775 738 48

767 230 132 770 149 143 772 ... 775 838 48

767 231 132 770 510 143 772 310 125 775 861 107

767 232 132 770 511 143 772 500 39 ...

767 234 132 770 512 143 772 501 39

767 235 132 770 513 143 772 502 39

767 236 132 770 514 143 772 549 103

770 515 143 772 550 103

768 ... 770 516 143 772 899 81

768 000 72 770 517 143 772 900 81

7
Summary of Types

The articles are listed by type number in numerical order.

Type No. Page Type No. Page Type No. Page Type No. Page

776 ... K 52 31 188 36 K 61 14 01 155 K 73 ...

776 012 135 K 52 31 51 71 K 61 14 02 155 K 73 31 41 98

776 015 104 K 52 31 57 71 K 61 14 03 155 K 73 31 47 98

776 064 83 K 52 31 81 7 16 K 61 14 04 155

776 165 97 K 52 31 82 7 16 K 61 14 05 155

776 166 97 K 52 31 83 7 16 K 61 15 11 156

776 167 97 K 52 31 84 7 16 K 61 15 12 156

776 168 97 K 52 31 85 7 16 K 61 15 13 156

776 202 97 K 52 31 86 7 16 K 61 15 21 156

776 203 97 K 52 33 57 67 K 61 15 22 156

K 52 33 58 67 K 61 15 23 156

K 52 ... K 52 34 17 38 K 61 15 31 156

K 52 07 517 78 K 52 34 517 69 K 61 15 32 156

K 52 07 527 78 K 52 34 527 69 K 61 15 33 156

K 52 07 537 78 K 52 34 81 7 17 K 61 15 41 156

K 52 14 17 47 K 52 34 82 7 17 K 61 15 42 156

K 52 14 517 77 K 52 34 83 7 17 K 61 15 43 156

K 52 14 527 77 K 52 34 84 7 17 K 61 15 52 156

K 52 16 81 7 18 K 52 34 85 7 17 K 61 15 61 156

K 52 16 82 7 18 K 52 34 86 7 17 K 61 15 62 156

K 52 16 83 7 18 K 52 40 17 46 K 61 16 01 158

K 52 16 84 7 18 K 52 40 517 74 K 61 16 02 158

K 52 16 85 7 18 K 52 40 527 74 K 61 30 1 155

K 52 16 86 7 18 K 61 30 2 155

K 52 17 517 76 K 53 ...

K 52 17 527 76 K 53 32 187 42 K 72 ...

K 52 17 537 76 K 53 32 188 42 K 72 23 41 105

K 52 22 17 52 K 53 33 57 68 K 72 23 47 105

K 52 22 51 79 K 53 33 58 68 K 72 31 47 94

K 52 22 57 79 K 72 31 57 104

K 52 30 57 66 K 61 ... K 72 36 41 93

K 52 30 58 66 K 61 12 0 158 K 72 36 47 93

K 52 31 187 36 K 61 13 0 158

8
 47... 88 MHz
Systems
Antenna Systems
47 ... 88 MHz

9
TV Transmitting Antenna
with dipole panels K 52 31 8..
47 … 88 MHz
● Antenna array of dipole panels K 52 31 8.. for different radiation patterns, especially suitable
for mounting on square masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range One channel in Band I (47 … 88 MHz)
VSWR s < 1.05 in one channel
Impedance 50 Ω
Polarization Horizontal
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,

S
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. of Panels Gain* Weight in kg (without mounting hardware) Windload in kN (160 km/h) Antenna height H in m (Spacing S in m)
bays per in dB Frequency in MHz Frequency in MHz Frequency in MHz
bay 47–54 54–61 60–68 66–72 76–82 82–88 47–54 54–61 60–68 66–72 76–82 82–88 47–54 54–61 60–68 66–72 76–82 82–88
2 3 4 2 3 4 2 3 4
2 3 4 5 6 2 3 4 5 6 2 3 4 5 6
2 5.4 280 250 220 200 190 180 4.0 3.5 3.3 3.2 2.8 2.6
1 3 3.5 450 400 350 320 300 300 6.0 5.3 5.0 4.8 4.2 3.9 4.5 4.0 3.6 3.3 2.9 2.7
4 2.0 620 540 460 440 420 400 7.3 6.5 6.0 5.9 5.3 4.8
2 8.4 620 540 460 440 420 400 8.0 7.0 6.5 6.3 5.6 5.2
2 3 6.6 950 840 750 700 660 630 12.0 10.6 10.0 9.6 8.5 7.8 10.9 9.6 8.6 8.0 7.0 6.5
4 5.0 1250 1100 970 900 850 800 14.5 13.0 12.0 11.8 10.5 9.5 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 11.5 1250 1100 970 900 850 800 16.0 14.0 13.0 12.6 11.2 10.4
4 3 9.6 1750 1550 1480 1360 1300 1250 24.0 21.2 20.0 19.2 17.0 15.6 23.7 20.8 18.6 17.4 15.2 14.1
4 8.1 2500 2200 1960 1800 1710 1630 29.0 26.0 24.0 23.6 21.0 19.0 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 13.3 1750 1550 1480 1360 1300 1250 24.1 21.0 19.5 18.9 16.8 15.6
6 3 11.4 2770 2450 2200 2000 1900 1820 36.0 31.8 30.0 28.8 25.5 23.4 36.5 32.0 28.6 26.7 23.3 21.7
4 9.9 3700 3260 2920 2700 2550 2420 43.6 39.0 36.0 35.4 31.5 28.5 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 14.5 2500 2200 1960 1800 1710 1630 32.1 28.0 26.0 25.2 22.4 20.8
8 3 12.6 3700 3260 2920 2700 2550 2420 48.1 42.4 40.0 38.4 34.0 31.2 49.3 43.2 38.6 36.1 31.5 29.3
4 11.1 4920 4350 3900 3560 3370 3200 58.1 52.0 48.0 47.2 42.0 38.0 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
10
 47... 88 MHz
Systems
TV Transmitting Antenna
with dipole panels K 52 31 8..
47 … 88 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5

10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Equal power splitting Different power splitting

6 bays
4/10 P
1,0
E rel
1/10 P

0,5

4/10 P
0 10 20 30 α° 40
1/10 P

8 bays
1,0
E rel

0,5

10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0
*) without null fill
with null fill and beam tilt
11
TV Transmitting Antenna
with dipole panels K 52 34 8..
47 … 88 MHz
● Antenna array of dipole panels K 52 34 8.. for different radiation patterns, especially suitable
for mounting on triangular or round masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range One channel in Band I (47 … 88 MHz)
VSWR s < 1.05 in one channel
Impedance 50 Ω
Polarization Horizontal
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,

S
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. of Panels Gain* Weight in kg (without mounting hardware) Windload in kN (160 km/h) Antenna height H in m (Spacing S in m)
bays per in dB Frequency in MHz Frequency in MHz Frequency in MHz
bay 47–54 54–61 60–68 66–72 76–82 82–88 47–54 54–61 60–68 66–72 76–82 82–88 47–54 54–61 60–68 66–72 76–82 82–88
2 3 4 2 3 4 2 3 4
2 3 4 5 6 2 3 4 5 6 2 3 4 5 6
2 3.9 310 275 250 235 205 195 3.9 3.4 3.3 3.0 2.8 2.5 4.5 4.0 3.6 3.3 2.9 2.7
1
3 1.7 470 410 375 350 310 290 5.7 5.1 4.8 4.4 4.1 3.8
2 6.9 650 550 500 470 410 390 7.9 6.7 6.5 6.0 5.5 5.0 10.9 9.6 8.6 8.0 7.0 6.5
2
3 4.7 990 820 750 700 620 580 11.4 10.1 9.6 8.8 8.1 7.5 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 9.9 1310 1095 1000 935 825 775 15.8 14.4 13.0 12.0 11.0 10.0 23.7 20.8 18.6 17.4 15.2 14.1
4
3 7.7 1910 1645 1500 1405 1235 1165 22.8 20.2 19.2 17.6 16.2 15.0 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 11.7 1910 1645 1500 1405 1235 1165 23.6 20.1 19.5 18.0 16.5 15.0 36.5 32.0 28.6 26.7 23.3 21.7
6
3 9.5 2820 2645 2250 2105 1855 1745 31.5 30.3 28.8 26.4 24.3 22.5 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)
2 12.9 2600 2190 2000 1870 1650 1550 34.2 26.8 26.0 24.0 22.0 20.0 49.3 43.2 38.6 36.1 31.5 29.3
8
3 10.7 3800 3290 3000 2810 2470 2330 45.6 40.4 38.4 35.2 32.4 30.0 (6.4) (5.6) (5.0) (4.7) (4.1) (3.8)

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).

12
 47... 88 MHz
Systems
TV Transmitting Antenna
with dipole panels K 52 34 8..
47 … 88 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5
60°

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5

10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Different power splitting

3/4 P 3/7 P 6 bays
1,0
E rel

0,5
60°

0 10 20 30 α° 40
1/7 P

1/4 P 3/7 P

8 bays
1,0
E rel

0,5

10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0
*) without null fill
with null fill and beam tilt
13
14
 Antennas for TV in lower VHF Band
47 ... 88 MHz

47... 88 MHz
Antennas
Model Types:
K 52 16 8. ., K 52 31 8. ., K 52 34 8. .

Type No. Description Frequency range Gain Polarization Page

K 52 31 8. . Directional Antenna, steel 47 ... 88 MHz 7.5 dB horizontal 16

K 52 34 8. . Directional Antenna, steel 47 ... 88 MHz 7.0 dB horizontal 17
K 52 16 8. . 8 Element Yagi Antenna, 47 ... 88 MHz 6.0 dB horizontal or 18
aluminum vertical

15
K 52 31 8. .
Directional Antenna
47 ... 88 MHz
● Directional antenna of hot-dip galvanized steel.
● Especially suitable for square and round masts. Radiation Patterns
(at mid-band)

72°

10

dB
3

in E-plane
Horizontal Radiation Pattern

56°

10

dB
3
Length see table
0

in H-plane
Vertical Radiation Pattern

Type No. K 52 31 81 7 K 52 31 82 7 K 52 31 83 7 K 52 31 84 7 K 52 31 85 7 K 52 31 86 7
Order No. 601 070 601 071 601 072 601 819 601 820 601 821

Frequency range 47 – 54 MHz 54 – 61 MHz 60 – 68 MHz 66 – 72 MHz 76 – 82 MHz 82 – 88 MHz

Channel 2 3 4
2 3 4 5 6
Input 7-16 female (type gas-stop)
VSWR < 1.15
Gain (ref. λ/2 dipole) 7.5 dB
Polarization Horizontal (vertical upon request)
Impedance 50 Ω
Max. power 6 kW (higher power upon request)
Dimensions in mm A 3360 2960 2640 2470 2165 2015
B 3200 2800 2500 2340 2040 1900
C 1330 1180 1060 995 875 820
Weight in kg 140 124 110 100 94 89
Wind load in kN (at v = 160 km/h)
frontal 2.60 2.30 2.10 2.05 1.80 1.60
lateral 1.30 1.20 1.10 1.10 1.00 0.90
Max. wind velocity 225 km/h
Material: Hot-dip galvanized steel. Radome: Fiberglass.

Mounting: Mounting hardware and mounting dimensions upon request.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation
patterns. Particularly for square and round masts.

Special features: The antenna is shipped dismounted.

Ice protection: Even under severe icy conditions the antenna is still functional due to its heavy-duty
construction and the fiberglass covers for the feeding points.

Scope of supply: Antenna consisting of two half-wave dipoles with reflector screens.

16
K 52 34 8. .
Directional Antenna

47... 88 MHz
47 ... 88 MHz

Antennas
● Directional antenna of hot-dip galvanized steel.
● Especially suitable for triangular and round masts. Radiation Patterns
(at mid-band)

80°

10

dB
3

in E-plane
Horizontal Radiation Pattern

56°

10

dB
3

0
Length see table
in H-plane
Vertical Radiation Pattern

Type No. K 52 34 81 7 K 52 34 82 7 K 52 34 83 7 K 52 34 84 7 K 52 34 85 7 K 52 34 86 7
Order No. 602 037 602 038 602 039 602 040 602 041 602 042

Frequency range 47 – 54 MHz 54 – 61 MHz 60 – 68 MHz 66 – 72 MHz 76 – 82 MHz 82 – 88 MHz

Channel 2 3 4
2 3 4 5 6
Input 7-16 female
VSWR < 1.15
Gain (ref. λ/2 dipole) 7 dB
Polarization Horizontal
Impedance 50 Ω
Max. power 6 kW (higher power on request)
Dimensions in mm A 3360 2960 2640 2470 2165 2015
B 3200 2800 2500 2340 2040 1900
C 1330 1180 1060 995 875 820
Weight in kg 148 137 125 117 103 97
Wind load in kN (at v = 160 km/h)
frontal 2.60 2.20 2.05 1.90 1.70 1.55
lateral 1.30 1.20 1.15 1.10 1.00 0.95
Max. wind velocity 225 km/h
Material: Hot-dip galvanized steel. Radome: Fiberglass.

Mounting: Mounting hardware and mounting dimensions upon request.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a component in arrays to achieve various radiation
patterns. Particularly for triangular and round masts.

Special features: The antenna is shipped dismounted.

Ice protection: Even under icy conditions the antenna keeps operating due to the radomes covering the feed
areas.

Scope of supply: Antenna consisting of two half-wave dipoles with reflector screens.

17
K 52 16 8. .
Directional Antenna
47 ... 88 MHz
● 8 element Yagi-antenna of weather-proof aluminum, fiberglass-elements
with encapsulated copper stranded wire. Radiation Patterns
(at mid-band)

68°

10

dB
3

in E-plane
Horizontal Radiation Pattern

C
128°

B
10

Length see table

dB
3

in H-plane
Vertical Radiation Pattern

Type No. K 52 16 81 7 K 52 16 82 7 K 52 16 83 7 K 52 16 84 7 K 52 16 85 7 K 52 16 86 7
Order No. 600 223 600 225 600 227 601 822 601 823 601 824

Frequency range 47 – 54 MHz 54 – 61 MHz 60 – 68 MHz 66 – 72 MHz 76 – 82 MHz 82 – 88 MHz

2 3 4
Channel
2 3 4 5 6
Input 7-16 female
VSWR < 1.15
Gain (ref. λ/2 dipole) 6 dB
Polarization Horizontal or vertical by conversion of the clamps
Impedance 50 Ω
Max. power 200 W (higher power upon request)
Dimensions in mm A 3500 2950 2700 2420 2120 1970
B 3000 2510 2240 2070 1810 1680
C 2225 1950 1740 1610 1410 1310
Weight in kg 18 15 12.5 11.5 10 9
Wind load in N (at v = 160 km/h)
Horizontally polarized frontal 715 615 540 500 440 400
lateral 675 575 475 440 375 350
Vertically polarized frontal 715 615 540 500 440 400
lateral 790 675 615 565 500 465
Packing in cm 330 x 76 x 13 275 x 76 x 13 250 x 76 x 13 222 x 76 x 13 192 x 76 x13 177 x 76 x 13
Max. wind velocity 160 km/h

Material: Support: Weather-proof aluminum. Elements: Fiberglass with inlaid copper wire.
Cover: Fiberglass. Clamp: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 115 mm diameter by means of mounting clamps, supplied.

Special features: The antenna is shipped dismounted.

Combinations: Two or more antennas can be combined to achieve higher gain and longer, narrower
beam width.

Grounding: Via mounting parts.

18
Antenna Systems

87.5 – 108 MHz

Systems
87.5 – 108 MHz

19
FM Transmitting Antenna
with dipole panels K 52 31 1. .
87.5 – 108 MHz
● Antenna array of dipole panels K 52 31 1. . for different radiation patterns, especially suitable
for mounting on square masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 87.5 – 108 MHz
VSWR s < 1.2 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω
Polarization Horizontal or vertical

3200 mm
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 5.0 3.2 140 2.7
1 3 3.5 2.2 200 2.5 4.0
4 2.0 1.6 260 4.7

2 8.0 6.3 260 5.5

2 3 6.5 4.5 400 5.7 8.0
4 5.0 3.2 530 9.5

2 11.0 12.6 530 11.0

4 3 9.5 8.9 790 12.1 16.0
4 8.0 6.3 1080 19.0

2 12.8 19.1 790 16.5

6 3 11.3 13.0 1200 18.5 24.0
4 9.7 9.3 1610 28.5

2 14.0 25.1 1080 22.0

8 3 12.5 17.8 1610 24.9 32.0
4 11.0 12.6 2150 38.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
20
FM Transmitting Antenna
with dipole panels K 52 31 1. .
87.5 – 108 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

87.5 – 108 MHz

Systems
Examples of typical horizontal Examples of typical vertical
antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Equal power splitting Different power splitting

4/10 P
6 bays
1,0
E rel
1/10 P

0,5

4/10 P
0 10 20 30 α° 40
1/10 P

8 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

*) without null fill

with null fill and beam tilt
21
FM Transmitting Antenna
with dipole panels K 52 34 1.
87.5 – 108 MHz
● Antenna array of dipole panels K 52 34 1. for different radiation patterns, especially suitable
for mounting on triangular or round masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 87.5 – 108 MHz
VSWR s < 1.2 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω
Polarization Horizontal

3200 mm
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 3.9 2.5 150 3.0
1 2.5
3 1.7 1.5 220 4.2

2 6.9 4.9 290 6.0

2 5.7
3 4.7 3.0 420 8.4

2 9.9 9.8 560 12.0

4 12.1
3 7.7 5.9 850 16.8

2 11.7 14.8 850 18.0

6 18.5
3 9.5 8.9 1290 25.2

2 12.9 19.5 1150 24.0

8 24.9
3 10.7 11.7 1700 33.6

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
22
FM Transmitting Antenna
with dipole panels K 52 34 1.
87.5 – 108 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

87.5 – 108 MHz

Systems
Examples of typical horizontal Examples of typical vertical
antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5
60°

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Different power splitting

3/4 P 3/7 P 6 bays
1,0
E rel

0,5
60°

1/7 P
0 10 20 30 α° 40
1/4 P 3/7 P

8 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

*) without null fill

with null fill and beam tilt
23
FM Transmitting Antenna
with dipole panels K 53 32 1. .
87.5 – 108 MHz
● Antenna array of circularly polarized dipole panels K 53 32 1. . for different radiation patterns,
especially suitable for mounting on square masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables
in accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 87.5 – 108 MHz
VSWR s < 1.2 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω

3000 mm
Polarization Linear, circular or elliptical
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 2.0 1.6 200 2.75
1 3 0.5 1.1 320 2.2 4.35
4 –1.0 0.8 420 5.5

2 5.0 3.2 420 5.5

2 3 3.5 2.4 750 5.2 8.7
4 2.0 1.6 850 11.0

2 8.0 6.3 850 11.0

4 3 6.5 4.5 1530 11.2 17.4
4 5.0 3.2 1660 22.0

2 9.8 9.6 1530 16.5

6 3 8.3 6.8 1870 17.2 26.1
4 6.7 4.7 2240 33.0

2 11.0 12.6 1660 22.0

8 3 9.5 8.9 2240 23.2 34.8
4 8.0 6.3 2970 44.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
24
FM Transmitting Antenna
with dipole panels K 53 32 1. .
87.5 – 108 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

87.5 – 108 MHz

Systems
Examples of typical horizontal Examples of typical vertical
antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Equal power splitting Different power splitting

4/10 P 6 bays
1,0
E rel
4/10 P

0,5

1/10 P
0 10 20 30 α° 40
1/10 P

8 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

*) without null fill

with null fill and beam tilt
25
FM Transmitting Antenna
with dipole panels K 53 36 1. .
87.5 – 108 MHz
● Antenna array of circularly polarized dipole panels K 53 36 1. . for different radiation patterns,
especially suitable for mounting on triangular or round masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables
in accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 87.5 – 108 MHz
VSWR s < 1.2 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω
Polarization Circular
Internal connections Connectors according to IEC, EIA or DIN

3000 mm
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied

H
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 0.0 1.0 140 2.4
1 1.82
3 –2.0 0.6 200 3.5

2 3.1 2.0 260 4.8

2 4.82
3 1.1 1.3 430 7.0

2 6.2 4.2 580 9.6

4 10.82
3 4.2 2.6 800 14.0

2 8.1 6.5 800 14.4

6 16.82
3 6.1 4.1 1230 21.0

2 9.3 8.5 1100 19.2

8 22.82
3 7.3 5.4 1590 28.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
26
FM Transmitting Antenna
with dipole panels K 53 36 1. .
87.5 – 108 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

87.5 – 108 MHz

Systems
Examples of typical horizontal Examples of typical vertical
antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0
E rel

0,5
60°

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Different power splitting

3/7P 6 bays
3/4P 1,0
E rel

0,5
60°

1/7P
0 10 20 30 α° 40
1/4P
3/7P

8 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

*) without null fill

with null fill and beam tilt
27
FM Transmitting Antenna with
Broadband Sidemount Antenna K 53 35 1. .
87.5 – 108 MHz
● Antenna array of elliptically polarized dipole panels K 53 35 1. . for different radiation patterns,
especially suitable for mounting on pipes.
● The feeder network is made up of coaxial power splitters and flexible connecting cables.

Input Connectors according to IEC, EIA or DIN.

> 500 mm
Frequency range 87.5 – 108 MHz
VSWR s < 1.25 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω
Polarization Elliptical
Internal connections Connectors according to IEC or EIA
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
2100 mm
Horizontal radiation pattern Omnidirectional,with preferred direction.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h
H

No. Gain* Weight Antenna Windload

of (at mid-band) (without mounting height H (v = 160 km/h)
bays dB times hardware) kg m frontal N lateral N
1 –1.5 0.7 25 0.834 115 365

4 4.5 2.8 100 7.13 460 1460 > 500 mm

6 5.5 3.6 150 11.33 690 2190

8 7.5 5.6 200 15.53 920 2920

10 8.8 7.6 250 19.73 1150 3650

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).

28
FM Transmitting Antenna with
Broadband Sidemount Antenna K 53 35 1. .
87.5 – 108 MHz

Typical Horizontal Radiation Pattern Vertical Radiation Patterns

(at mid-band)

87.5 – 108 MHz

Systems
Examples of typical vertical
radiation patterns*) for several bays
of identical, vertically stacked
antenna arrays.

4 bays
1,0
E rel

0,5

10
0 10 20 30 α° 40
dB

6 bays
1,0
E rel

0,5

0 10 20 30 α° 40

8 bays
1,0
E rel

0,5

0 10 20 30 α° 40

10 bays
1,0
E rel

0,5

0 10 20 30 α° 40

*) without null fill

with null fill and beam tilt
29
FM Transmitting Antenna
(Superturnstile Antenna) 87.5 – 108 MHz
K 52 97 1. .
● Self-supporting hot-dip galvanized steel superturnstile antenna. Up to 4 bays may be stacked.
● Optionally up to 8 bays may be stacked if the superturnstile antennas are mounted inside a
self-supporting fiberglass cylinder.

Input Connectors according to IEC, EIA or DIN.

Frequency range 87.5 – 108 MHz
VSWR s < 1.2 throughout the whole frequency range.
Tuning not required.
Impedance 50 Ω
Polarization Horizontal

3000 mm
Max. power According to customer’s requirements,
10 kW max. per bay.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a

H
2-way power splitter or patch panel.
Internal connections The radiating elements are fed with
coaxial connecting cables and hybrid couplers.
Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Structure Superturnstile antenna on self-supporting
hot dip galvanized steel structure.
Up to 4 bays may be stacked.
Mounting On top of existing structure by means of a flange.
Ice protection Under icing the fiberglass cover over
the feedslots and the rugged construction keep
the antenna in proper function.
Grounding Via mounting parts.
Max. wind velocity 160 km/h

No. Type No. / Gain* Weight Antenna Windload

of Order No. (at mid-band) (without cylinder) height H (without cylinder)
bays dB times kg m (160 km/h) kN
1 K 52 97 11 1 1.26 275 3 3.2
2 K 52 97 12 4 2.51 550 6 6.5
4 K 52 97 14 7 5.00 1450 12 15.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.4 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
30
FM Transmitting Antenna
(Superturnstile Antenna) 87.5 – 108 MHz
K 52 97 1. .

Typical Horizontal Radiation Pattern Vertical Radiation Patterns

(at mid-band)

87.5 – 108 MHz

Systems
Examples of typical vertical
radiation patterns*) for several bays
of identical, vertically stacked
antenna arrays.

1 bay
100
E rel

50
10
dB

0
0 10 20 30 α° 40

2 bays
100
E rel

50

0 10 20 30 α° 40

4 bays
100
E rel

50

0 10 20 30 α° 40

*) without null fill

with null fill and beam tilt
31
K 53 37 1. .
FM-Transmitting Antenna
87.5 – 108 MHz
● An economic FM-transmitting antenna system can be built by stacking
2 or more vertical dipoles 762 943 in front of a thin tubular mast.
● Such antenna systems provide signal coverage in all azimuth directions
as shown in the horizontal radiation pattern below. (The horizontal
radiation pattern will be distorted, if a significantly bigger mast is used).

> 250
mm
Input Connectors according to IEC, EIA or DIN.
Frequency range 87.5 – 108 MHz
VSWR s < 1.25 throughout the whole frequency range.
Lower VSWR for single channels upon request.
Impedance 50 Ω
Polarization Vertical
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,

2100 mm
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation

H
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Gain* Weight Antenna Windload

of (at mid-band) (without mounting height H (v = 160 km/h)
bays dB times hardware) kg m frontal N lateral N
1 2.0 1.6 25 1.38 115 220

2 5.0 3.2 25 3.48 230 440

4 8.0 6.3 100 7.68 460 880

6 9.7 9.3 150 11.88 690 1320

8 11.0 12.6 200 16.08 920 1760

10 11.8 15.1 250 20.28 1150 2200

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).

32
K 53 37 1. .
FM-Transmitting Antenna
87.5 – 108 MHz

Typical Horizontal Radiation Pattern Vertical Radiation Patterns

(at mid-band beamtilt ≈1°)

87.5 – 108 MHz

Systems
Examples of typical vertical
radiation patterns*) for several bays
of identical, vertically stacked
antenna arrays.

4 bays
1,0
220°
E rel

0,5

10
0 10 20 30 α° 40
dB

6 bays
1,0
E rel

0,5

0 10 20 30 α° 40

8 bays
1,0
E rel

0,5

0 10 20 30 α° 40

10 bays
1,0
E rel

0,5

0 10 20 30 α° 40

*) without null fill

with null fill and beam tilt
33
34
 Antennas for FM in VHF Band
66 – 73 MHz and 87.5 – 108 MHz
Model Types:
K 52 14 1. ., K 52 22 1. ., K 52 31 1. ., K 52 34 1. ., K 52 35 1. .,
K 52 40 1. ., K 52 97 1. ., K 53 22 1. ., K 53 31 1. ., K 53 32 1. .,
K 53 35 1. ., K 53 36 1. ., K 53 37 1. ., K 53 38 1. ., K 53 39 1. .,
K 53 40 1. .,

87.5 – 108 MHz

Antennas
Type No. Description Frequency range Gain Polarization Page

K 52 31 18. Directional Antenna, steel 87.5 – 108 MHz 7.5 dB horizontal 36

or vertical
715 849 Directional Antenna, steel 87.5 – 108 MHz 7.5 dB horizontal 36
or vertical
774 321 Directional Antenna, steel 87.5 – 108 MHz 7.5 dB horizontal 37
or vertical
K 52 34 17 Directional Antenna, steel 87.5 – 108 MHz 7.0 dB horizontal 38
750 10008 Directional Antenna, steel 87.5 – 108 MHz 7.0 dB horizontal 38
752 183 Directional Antenna, steel 87.5 – 108 MHz 7.0 dB horizontal 38
772 500 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 39
772 501 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 39
772 502 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 39
750 10183 Directional Antenna, steel 87.5 – 108 MHz 4.0 dB vertical 40
768 476 Dual Band Directional Antenna, steel .66 – 73 MHz 6.0 dB horizontal 41
87.5 – 108 MHz 7.5 dB horizontal
K 53 32 18. Directional Antenna, steel 87.5 – 108 MHz 7.5 dB linear 42
4.5 dB circular
754 154 Directional Antenna, steel 87.5 – 108 MHz 3.5 dB circular 43
755 587 Directional Antenna, steel 87.5 – 108 MHz 3.5 dB circular 43
757 629 Directional Antenna, steel 87.5 – 108 MHz 3.5 dB circular 43
762 109 Directional Antenna, steel 87.5 – 108 MHz 3.5 dB circular 43
750 10022 Broadband FM Sidemount Antenna, steel 87.5 – 108 MHz –1.5 dB elliptical 44
750 10023 Broadband FM Sidemount Antenna, steel 87.5 – 108 MHz –1.5 dB elliptical 44
750 10086 Directional Antenna, steel, aluminum 87.5 – 108 MHz 5.5 dB Horizontal 45
and vertical
K 52 40 17 4 Element Yagi Antenna, aluminum 87.5 – 108 MHz 5.5 dB horizontal 46
or vertical
K 52 14 17 9 Element Yagi Antenna, aluminum 87.5 – 108 MHz 7.5 dB horizontal 47
775 738 Directional Antenna, steel 87.5 – 108 MHz 5.0 dB vertical 48
775 838 Directional Antenna, steel 87.5 – 108 MHz 5.0 dB vertical 48
770 776 3 Element Yagi Antenna, steel 87.5 – 108 MHz 4.0 dB vertical 49
770 777 3 Element Yagi Antenna, steel 87.5 – 108 MHz 4.0 dB vertical 49
762 943 Broadband Dipole for Tubular Mast, steel 87.5 – 108 MHz 2.0 dB vertical 50
763 715 Broadband Dipole for Tubular Mast, steel 87.5 – 108 MHz 2.0 dB vertical 50
775 130 Broadband Dipole for Tubular Mast, steel 87.5 – 108 MHz 2.0 dB vertical 50
750 10034 Directional Antenna, steel 87.5 – 108 MHz 3.0 dB vertical 50
750 10035 Directional Antenna, steel 87.5 – 108 MHz 3.0 dB vertical 51
K 52 22 17 Log.-per. Directional Antenna, steel 87.5 – 108 MHz 6.0 dB horizontal 52
775 000 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 53
775 001 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 53
775 002 Directional Antenna, steel 87.5 – 108 MHz 6.0 dB vertical 53

35
K 52 31 1. .
Directional Antenna
87.5 – 108 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for square masts.

Type No. K 52 31 187 K 52 31 188 715 849

Order No. 601 278 601 629

Input (type gas-stop) 7-16 female 7/8″ EIA-flange 13-30 female

Frequency range 87.5 – 108 MHz
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7.5 dB at mid-band
Impedance 50 Ω
Polarization Horizontal or vertical
Max. power 2.5 kW 4 kW 6 kW
(higher power upon request)
Weight 64 kg
Wind load (at 160 km/h)
Horizontally polarized frontal / lateral: 1500 N / 875 N
Vertically polarized frontal / lateral: 1500 N / 825 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass. A: 2490 mm
B: 1740 mm
Mounting: Mounting hardware and mounting dimensions C: 730 mm
upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square masts.

Scope of supply: Antenna without mounting clamps.

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

73° 57°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane

36
K 52 31 1. .
Directional Antenna
87.5 – 108 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for square masts.

Type No. / Order No. 774 321

87.5 – 108 MHz

Frequency range 87.5 – 108 MHz

Antennas
Input (type gas-stop) 7/8″ EIA-flange
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7.5 dB at mid-band
Impedance 50 Ω
Polarization Horizontal or vertical
Max. power 4 kW
(higher power upon request)
Weight 85 kg
Wind load (at 160 km/h)
Horizontally polarized frontal / lateral: 2000 N / 1380 N
Vertically polarized frontal / lateral: 2000 N / 1250 N
Max. wind velocity 220 km/h

Material: Hot-dip galvanized steel.

A: 2490 mm
Radome: Fiberglass. B: 2700 mm
C: 832 mm
Mounting: Mounting hardware and mounting dimensions
upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square masts.

Scope of supply: Antenna without mounting clamps.

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

70° 65°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane

37
K 52 34 1. .
Directional Antenna
87.5 – 108 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for triangular and round masts.
B

Type No. K 52 34 17 750 10008 752 183

Order No. 601 694

Input (type gas-stop) 7-16 female 7/8″ EIA-flange 13-30 female

Frequency range 87.5 – 108 MHz
VSWR < 1.2
Gain (ref. to λ/2 dipole) 7 dB at mid-band
Impedance 50 Ω A
Polarization Horizontal
Max. power 2.5 kW 4 kW 6 kW
(higher power upon request)
Weight 66 kg
Wind load (at 160 km/h) frontal: 1700 N
lateral: 875 N C
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass.
A: 2490 mm
Mounting: Mounting hardware and mounting dimensions B: 1740 mm
upon request. C: 760 mm

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for triangular and round
masts.

Scope of supply: Antenna without mounting clamps.

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

80° 56°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

38
K 53 31 1. .
Directional Antenna
87.5 – 108 MHz
● Vertically polarized directional antenna.
● Especially suitable for triangular and round masts.

87.5 – 108 MHz

Type No. / Order No. 772 500 772 501 772 502

Antennas
Input 7-16 female 7/8″ 1 5/8″
(type gas-stop) EIA-flange EIA-flange
Frequency range 87.5 – 108 MHz
VSWR < 1.15
Gain (ref. λ/2 dipole) 6 dB at mid-band
Impedance 50 Ω A
Polarization Vertical
Max. power 2.5 kW 5 kW 14 kW
Weight 65 kg 65 kg 75 kg
Wind load frontal: 1550 N 1550 N 1620 N
(at 160 km/h) lateral: 850 N 850 N 970 N
Max. wind velocity 225 km/h
Dimensions A 2200 mm
B 2000 mm

Material: Hot-dip galvanized steel.

Radome: Fiberglass.
B
Mounting: To a vertical pipe of ∅ 89 mm by 3 pcs. U-bolts
(supplied) or to proper flanges. 772 500
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: Even under icy conditions the antenna keeps

operating due to the radomes covering the feed
areas.

Combinations: The antenna is especially suitable as a compo-

nent in arrays to achieve various radiation pat-
terns. Particularly for triangular and round masts.

Scope of supply: Antenna consisting of two half-wave dipoles with

reflector screen and 3 U-bolts.

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

70° 76°

10 10
dB

dB

3 3

0 0

E-plane H-plane
Vertical Radiation Pattern Horizontal Radiation Pattern

39
K 53 31 1. .
Directional Antenna
87.5 – 108 MHz
● Vertically polarized directional antenna.

Type No. / Order No. 750 10183

Input 7/8″ EIA-flange

Frequency range 87.5 – 108 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 4 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 5 kW
Weight approx. 41 kg
Wind load approx. frontal: 650 N
(at 160 km/h) lateral: 850 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass.

Mounting: Mounting hardware upon request.

Grounding: Via mounting parts.

Ice protection: Even under icy conditions the antenna keeps 1280
operating due to the radomes covering the
feed areas.

Scope of supply: Antenna consisting of one half-wave dipole

with reflector screen.
1900

Special features: The antenna is shipped dismounted.

7/8˝ EIA

853
All dimensions in mm

Radiation Patterns (at mid-band)

135°

70°

10 10
dB

3 3
dB

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

40
K 52 35 1. .
Dual Band Directional Antenna
66 – 73 MHz / 87.5 – 108 MHz
● Dipole panel for OIRT and CCIR bands for FM radio.
● Especially suitable for square masts.

87.5 – 108 MHz

Type No. / Order No. 768 476

Antennas
Input 7-16 female
Frequency range OIRT: 66 – 73 MHz / CCIR: 87.5 – 108 MHz
VSWR 66 – 73 MHz: ≤ 1.3 / 87.5 – 108 MHz: ≤ 1.2
Gain (ref. λ/2 dipole) 66 – 73 MHz: 6 dB / 87.5 – 108 MHz: 7.5 dB
Impedance 50 Ω
Polarization Horizontal B
Max. power 6 kW (higher power upon request)
Weight 135 kg C
Wind load (at 160 km/h) frontal: 2.5 kN
lateral: 1.1 kN
Max. wind velocity 225 km/h
A
Material: Hot-dip galvanized steel.
Radome: Fiberglass.
A: 2840 mm
B: 1500 mm
Mounting: Mounting hardware and mounting dimensions C: 1080 mm
upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square masts.

Scope of supply: Antenna consisting of two half-wave dipoles with

reflector screens.

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

72° 70°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

41
K 53 32 1. .
Directional Antenna
87.5 – 108 MHz
● Broadband directional antenna made of hot-dip galvanized
steel.
● Especially suitable for square masts.
● B
Optionally for circular, horizontal, vertical or slant polarization.
4 dipoles are arranged symmetrically in front of a reflector screen. With suitable feeding
the antenna radiates circularly polarized. An isolation of 40 – 50 dB between horizontal
and vertical pairs of dipoles is achieved through the spezial design. This design permits
the transmission of 2 programs – horizontally and vertically polarized – independently from C
each other.

A
Type No. K 53 32 187 K 53 32 188
Order No. 601 768 601 979

Input 4 x 7-16 female 4 x 7/8 ″ EIA-flange

Frequency range 87.5 – 108 MHz
VSWR < 1.25 (linear polarization)
< 1.1 (circular polarization)
Gain (ref. λ/2 dipole) 7.5 dB at mid-band
(linear polarization)
4.5 dB at mid-band A = B: 2200 mm K 53 32 187
(circular polarization) C= 830 mm
Impedance 50 Ω
Max. power 2.5 kW for each input 4 kW for each input
(higher power upon request)
Weight 89 kg
Wind load (at 160 km/h) Frontal: 1.60 kN
Lateral: 1.13 kN
Max. wind velocity 225 km/h
Radiation Patterns
Material: Hot-dip galvanized steel.
(at mid-band)
Weather protection: fiberglass cover.

Mounting: The antenna must be mounted so that

Horizontal Polarization
the bent radiators are horizontally
(bent dipoles)
polarized. Mounting dimensions and
mounting hardware on request. 66° 62°

Ice protection: Even under severe icy conditions the

antenna is still functional due to its
10 10
heavy-duty construction and the fibre-
glass covers of the feeding points.
dB

dB

3 3

0 0
Grounding: Via mounting parts.
in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern
Polarization: Suitable feeding of the horizontal and
vertical dipole pairs optionally result in
left or right hand circular or elliptical or
Vertical Polarization
slant polarization or simultaneous
(straight dipoles)
horizontal and vertical polarization.

Combinations: The antenna is especially suitable as a 62° 64°

component in arrays to achieve various
radiation patterns. Particularly for square
masts.
10 10

Scope of supply: Antenna without mounting clamps.

dB

dB

3 3

0 0
Special features: The antenna will be shipped dismounted.
in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

42
K 53 36 1. .
Directional Antenna
87.5 – 108 MHz
● Circularly polarized broadband directional antenna
of hot-dip galvanized steel.
● Especially suitable for triangular and round masts.

Type No. normal position 754 154 755 587

87.5 – 108 MHz

Antennas
Order No. rotated position 757 629 762 109

Input 2 x 7-16 female 2 x 13-30 female

Frequency range 87.5 – 108 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 3.5 dB at mid-band C B
Impedance 50 Ω
Polarization Circular
Max. power 2.5 kW for each input 5 kW for each input
Weight 60 kg
Wind load (at 160 km/h) frontal: 1250 N
lateral: 875 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass.
A = B: 1820 mm
C: 900 mm
Mounting: Mounting hardware and mounting dimensions
upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for triangular and round
masts.

Scope of supply: Antenna without mounting clamps.

Special features: The antenna is shipped dismounted.

Radiation Patterns
(at mid-band)

76°

10
dB

43
K 53 35 1. .
Broadband FM Sidemount Antenna
87.5 – 108 MHz
● Omnidirectional propagation with preferred direction.
● Mounting to pipes.
● Elliptical polarization.

Type No. / Order No. 750 10022 750 10023

Input 7/8˝ EIA-flange 1 5/8˝ EIA-flange

Frequency 87.5 – 108 MHz
VSWR in one channel < 1.5
Gain (ref. λ/2 dipole) –1.5 dBd at mid-band
Impedance 50 Ω
Polarization Elliptical
Max. power 5 kW 10 kW
(at 40 °C ambient temperature)
Weight 25 kg
Wind load (at 160 km/h) frontal: 115 N
lateral: 365 N
Max. wind velocity 240 km/h
Packing size 1300 x 1300 x 200 mm

Material: Hot-dip galvanized steel.

Ice protection: Feed point radome (optional).

Mounting: To pipes of 75 – 125 mm ∅ by means A

of 2 mounting clamps, supplied.

Grounding: Via mounting parts.

Horizontal Radiation Patterns (at mid-band)

Polarization and Pattern
depending on mast structure behind
750 10023

A = 1385 mm
B = approx. 834 mm

10 10
dB
dB

3 3

0 0

Vertical Polarization Horizontal Polarization

44
K 53 34 1. .
Directional Antenna
87.5 – 108 MHz
● 2 x 4 element broadband Yagi antenna.
● Component for low power transmitting antennas.

87.5 – 108 MHz

Type No. / Order No. 750 10086

Antennas
Input 2 x 7-16 female
Frequency range 87.5 – 108 MHz
VSWR s < 1.3
Gain (ref. λ/2 dipole) 5.5 dB at mid-band
Impedance 50 Ω
Polarization Horizontal and vertical
Max. power 2 x 500 W (at 40 °C ambient temperature)
Weight 25 kg
Wind load (at 160 km/h) frontal: 115 N
lateral: 365 N
Max. wind velocity 240 km/h B
Packing size 160 x 160 x 1930 mm

Material: Supporting pipe: Hot-dip galvanized steel.

Director pipe and reflector: Weather-proof
aluminum. Radiator in fiberglass radome.

A
Mounting: To pipes of 60 – 120 mm diameter by means
of mounting clamps, supplied.

A = approx. 1560 mm
Grounding: Via mounting parts.
B = 1700 mm

Special features: The antenna is shipped dismounted.

Radiation Patterns (at mid-band)

102°
102°

65°

10 10
dB
dB

3 3

0 0

in E-plane in H-plane

45
K 52 40 1. .
Directional Antenna
87.5 – 108 MHz
● 4 element broadband Yagi antenna.
● Component for low power transmitting antennas.

Type No. K 52 40 17
Order No. 600 263

Input 7-16 female

Frequency range 87.5 – 108 MHz B
VSWR s < 1.3
Gain (ref. λ/2 dipole) 5.5 dB at mid-band
Impedance 50 Ω
Polarization Horizontal or vertical
A
Max. power 500 W (at 40 °C ambient temperature)
Weight 13.5 kg
Wind load (at 160 km/h)
Horizontally polarized frontal / lateral: 215 N / 160 N
Vertically polarized frontal / lateral: 215 N / 340 N
Max. wind velocity 225 km/h
Packing size 160 x 160 x 1900 mm A = 1400 mm
B = 1700 mm
Material: Supporting pipe: Hot-dip galvanized steel.
Director pipe and reflector: Weather-proof
aluminum. Radiator in fiberglass radome.

Mounting: To pipes of 60 – 115 mm diameter by means

of mounting clamps, supplied.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns.

Special features: The antenna is shipped dismounted.

New: The design has been improved to allow use

of both polarizations.

Radiation Patterns (at mid-band)

102°
102°

65°

Assembly

10 10
dB
dB

3 3

0 0

in E-plane in H-plane

46
K 52 14 1. .
Directional Antenna
87.5 – 108 MHz
● 9 element broadband Yagi antenna of weatherproof aluminum.

87.5 – 108 MHz

Antennas
C

A: 3160 mm
B: 1840 mm
C: 1750 mm

Type No. K 52 14 17
Radiation Patterns
Order No. 600 204 (at mid-band)
Input 7-16 female
Frequency range 87.5 – 108 MHz
56°
VSWR < 1.4
Gain (ref. λ/2 dipole) 7.5 dB at mid-band
Impedance 50 Ω
Polarization Horizontal or vertical
10
Max. power 500 W
Weight 16 kg
dB

3
Wind load (at 160 km/h)
Horizontally polarized frontal / lateral: 575 N / 625 N 0

Max. wind velocity 225 km/h in E-plane

Vertically polarized frontal / lateral: 575 N / 665 N
Max. wind velocity 200 km/h
Packing size 3100 x 220 x 220 mm 72°

Material: Weather-proof aluminum.

Radiator in fiberglass radome.

10
Mounting: To pipes of 60 – 115 mm diameter by means
of mounting clamps, supplied.
dB

Grounding: Via mounting parts. 0

in H-plane
Combinations: Two or more antennas can be combined
to achieve higher gain and longer, narrower
beam width.

Special features: The antenna is shipped dismounted.

47
K 53 40 1. .
Directional Antenna
87.5 – 108 MHz
● 4 elements broadband Yagi antenna.
● Mounting to pipes.
● Vertically polarized.
● 5 dB gain.

Type No. / Order No. 775 738 775 838

Input 7/8˝ EIA-flange 7-16 female

Frequency 87.5 – 108 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 5 dB at mid-band
Impedance 50 Ω
Polarization Vertical

1750 mm
Max. power 5 kW 3 kW
(at 40 °C ambient temperature)
Weight 20 kg
Wind load (at 160 km/h) frontal: 230 N
lateral: 400 N
Max. wind velocity 225 km/h
Packing size 1800 x 1750 x 95 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 125 mm ∅ by means

of 2 U-bolts, supplied.

Grounding: Via mounting parts. 1600 mm

Specials: The antenna may be equipped with ice protec-

tion set Type No. 753 10118 for use at sites with
icy conditions (please order separately).
The max. wind velocity with an ice layer of 3 cm
is 130 km/h.

Radiation Patterns (at mid-band)

120°
60°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

Assembly

48
K 53 39 1. .
Directional Antenna
87.5 – 108 MHz
● 3 elements broadband Yagi antenna.
● Mounting to pipes.
● Vertically polarized.
● 4 dB gain.

87.5 – 108 MHz

Antennas
Type No. / Order No. 770 776 770 777

Input 7/8˝ EIA-flange 7-16 female

1822 mm
(type gas-stop)
Frequency 87.5 – 108 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 4 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 5 kW 3 kW
(at 40 °C ambient temperature)
Weight 13 kg
Wind load (at 160 km/h) frontal: 165 N
lateral: 275 N 1300 mm
Max. wind velocity 225 km/h
Packing size 1890 x 1550 x 92 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 125 mm ∅ by means

of 2 U-bolts, supplied.

Grounding: Via mounting parts.

Accessories: The antenna may be equipped with ice protec-

tion set Type No. 774 168 for use at sites with
icy conditions (please order separately).
The max. wind speed with an ice layer of 3 cm
is 130 km/h.

Radiation Patterns (at mid-band)

150°

70°

10 10
dB

3 3
dB

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

Assembly

49
K 53 37 1. .
Broadband Dipole for Tubular Mast
87.5 – 108 MHz
● Omnidirectional propagation with preferred direction.
● Mounting to pipes.
● Vertically polarized.
● 2 dB gain.

Type No. / Order No. 762 943 763 715 775 130

Input 7-16 female 7/8″ 1 5/8″

(type gas-stop) EIA-flange EIA-flange
Max. power 3 kW 5 kW 10 kW
(at 40 °C ambient temperature)
Frequency range 87.5 – 108 MHz
VSWR s < 1.3 s < 1.25
Gain (ref. λ/2 dipole) 2 dB at mid-band A
Impedance 50 Ω
Polarization Vertical
Wind load frontal: 115 N 165 N
(at 160 km/h) lateral: 220 N 340 N
Weight 13 kg 22 kg
Max. Wind velocity 225 km/h 300 km/h
Packing 1552 x 1186 x 197 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 125 mm by means of

2 mounting clamps, supplied.

Grounding: Via mounting parts. B

763 715
A: 1380 mm / B: 830 mm

Radiation Patterns (at mid-band)

220°
70°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

50
K 53 38 1. .
Directional Antenna
87.5 – 108 MHz
● 2 elements broadband Yagi antenna.
● Mounting to pipes.
● Vertically polarized.
● 3 dB gain.

87.5 – 108 MHz

Antennas
Type No. 750 10035 750 10034

Input 7-16 female 7/8˝ EIA-flange

(type gas-stop)
Frequency 87.5 – 108 MHz

1800 mm
VSWR < 1.3
Gain (ref. λ/2 dipole) 3 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 3 kW 5 kW
(at 40 °C ambient temperature)
Weight 13 kg
Wind load (at 160 km/h) frontal: 180 N
lateral: 320 N
Max. wind velocity 225 km/h
Packing size 1850 x 1100 x 92 mm
870 mm
Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 125 mm ∅ by means

of 2 U-bolts, supplied.

Grounding: Via mounting parts.

Radiation Patterns (at mid-band)

175°

75°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

51
K 52 22 1. .
Directional Antenna
87.5 – 108 MHz
● Logarithmic-periodic broadband directional antenna
with extremely low side-lobes.
● Especially rugged design of hot-dip galvanized steel.
● High reliability even under heavy icy conditions.

Type No. K 52 22 17
Order No. 600 232
A
Input 7-16 female
Frequency range 87.5 – 108 MHz
VSWR < 1.3
Gain (ref. to λ/2 dipole) 6 dB at mid-band
Impedance 50 Ω
Side-lobe suppression > 25 dB
Polarization Horizontal (special version for
B
vertical polarization upon request)
Max. power 2 kW
(higher power upon request)
Weight 46 kg
Wind load (at 160 km/h) frontal: 500 N A: 2600 mm
lateral: 875 N B: 2050 mm
Max. wind velocity 225 km/h
Packing size 2650 x 2100 x 370 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 115 mm diameter by means

of mounting clamps, supplied.
Attention: Antenna may not be installed with
vertical polarization.

Grounding: Via mounting parts.

Combinations: Several antennas can be combined to increase

the gain and to produce radiation patterns with
very high side-lobe suppressions.

Radiation Patterns (at mid-band)

95°
60°

10 10
dB

dB

3 3

0 0

in E-Plane in H-Plane
Horizontal Radiation Pattern Vertical Radiation Pattern

52
K 53 22 1. .
Directional Antenna
87.5 – 108 MHz
● Logarithmic-periodic broadband directional antenna
with extremely low side-lobes.
● Especially rugged design of hot-dip galvanized steel.
● High reliability even under heavy icy conditions.

87.5 – 108 MHz

Type No. / Order No. 775 000 775 001 775 002

Antennas
Input (type gas-stop) 7-16 7/8″ 1 5/8″
female EIA-flange EIA-flange
Frequency range 87.5 – 108 MHz
VSWR < 1.3
Gain (ref. to λ/2 dipole) 6 dB at mid-band
Impedance 50 Ω
Side-lobe suppression > 25 dB
Polarization Vertical
Max. power 2.5 kW 5 kW 10 kW
(at 40 °C ambient temperature)
Weight 46 kg
Wind load (at 160 km/h) frontal: 500 N
lateral: 1000 N
Max. wind velocity 225 km/h
Packing size 2650 x 2100 x 370 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 115 mm diameter by means 2570

of mounting clamps, supplied.

Grounding: Via mounting parts.

Combinations: Several antennas can be combined to increase

2034
the gain and to produce radiation patterns with
very high side-lobe suppressions.

7/8″ EIA

775 001

Radiation Patterns (at mid-band)

95°
60°

10 10
dB

dB

3 3

0 0

in H-Plane in E-Plane
Horizontal Radiation Pattern Vertical Radiation Pattern

53
54
Antenna Systems
174 – 230 MHz

174 – 230 MHz

Systems

55
TV Transmitting Antenna
with dipole panels K 52 33 5. .
174 – 230 MHz
● Antenna array of dipole panels K 52 33 5. . for different radiation patterns, especially suitable
for mounting on square masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 174 – 230 MHz
VSWR < 1.05 in the operating channels after tuning.
Impedance 50 Ω
Polarization Horizontal. Application of panels K 53 33 57

3200 mm
allows vertical polarization as well.
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.

H
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 9.0 7.9 130 2.5
1 3 7.6 5.8 195 2.8 3.75
4 6.1 4.1 270 5.0

2 11.8 15.1 270 5.0

2 3 10.4 11.0 390 6.0 7.5
4 8.9 7.8 540 10.0

2 14.7 29.5 540 10.0

4 3 13.3 21.4 780 12.4 15.0
4 11.8 15.1 1080 20.0

2 16.4 43.7 810 15.0

6 3 15.0 31.6 1170 18.8 22.5
4 13.5 22.4 1640 30.0

2 17.6 57.5 1080 20.0

8 3 16.2 41.7 1640 25.2 30.0
4 14.7 29.5 2160 40.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
56
TV Transmitting Antenna
with dipole panels K 52 33 5. .
174 – 230 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

100

174 – 230 MHz

Systems
E rel

50

0 5 10 α°

4 bays
100
E rel

50
10 10
dB

dB

3 3

0 0
0 5 10 α°

Equal power splitting Different power splitting

6 bays
4/13 P 100
E rel

1/13 P
50
4/13 P

0 5 10 α°
4/13 P

8 bays
100
E rel

50
10 10
dB

dB

3 3

0 0 0 5 10 α°
*) without null fill
with null fill and beam tilt
57
TV Transmitting Antenna
with dipole panels K 52 34 5. .
174 ... 230 MHz
● Antenna array of dipole panels K 52 34 5.. for different radiation patterns, especially suitable
for mounting on triangular or round masts.
● The feeder network is made up of coaxial power splitters and flexible connecting cables in
accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 174 – 202 MHz resp. 202 – 230 MHz
VSWR < 1.05 in the operating channels after tuning.
Impedance 50 Ω
Polarization Horizontal
Internal connections Connectors according to IEC, EIA or DIN

1600 mm
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).

H
Painting If required, the antenna is painted in aviation
warning colours.
Grounding Via mounting parts.
Max. wind velocity 225 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 3.9 2.5 50 0.9
1 1.2
3 1.7 1.5 70 1.25

2 6.9 4.9 95 1.8

2 2.8
3 4.7 3.0 140 2.5

2 9.9 9.8 180 3.6

4 6.0
3 7.7 5.9 270 5.0

2 11.7 14.8 270 5.4

6 9.2
3 9.5 8.9 400 7.5

2 12.9 19.5 360 7.2

8 12.4
3 10.7 11.7 540 10.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
58
TV Transmitting Antenna
with dipole panels K 52 34 5. .
174 ... 230 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 2 bays

1,0

174 – 230 MHz

Systems
E rel

0,5
60°

0 10 20 30 α° 40

4 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

Different power splitting

6 bays
3/4 P 3/7 P 1,0
E rel

0,5
60°

1/7 P 0 10 20 30 α° 40

1/4 P 3/7 P

8 bays
1,0
E rel

0,5
10 10
dB

dB

3 3
0 10 20 30 α° 40
0 0

*) without null fill

with null fill and beam tilt
59
TV Transmitting Antenna
(Superturnstile Antenna) 174 – 230 MHz
K 52 97 5. .
● Superturnstile Antenna made of hot-dip galvanized steel for mounting on top of mast.
● Up to 4 bays may be built as self-supporting version. Up to 16 bays can be stacked
inside a self-supporting G.R.P. cylinder.

Input Connectors according to IEC, EIA or DIN.

Frequency range 174 – 230 MHz
VSWR < 1.05 in the operating channel
Impedance 50 Ω
Polarization Horizontal

1500 mm
Max. power According to customer’s requirements,
10 kW max. per bay.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Internal connections The radiating elements are fed with
coaxial connecting cables and hybrid couplers.
Connectors according to IEC, EIA or DIN
are used throughout the system,

H
allowing easy assembly and maintenance.
Mounting On top of existing structure by means of a flange.
Ice protection The radiating slots are protected by a fiberglass
cover. Cylinder provides full protection.
Grounding Via mounting parts resp. via 4 grounding ropes
at the exterior cylinder-surface.
Max. wind velocity As required.

∅ 1.6 m
G.R.P. cylinder

No. Gain* Weight kg Antenna Windload

of (at mid-band) without with height H (v = 160 km/h)
bays dB times cylinder cylinder m kN
2 4.0 2.5 150 depending 3.0 4.0
4 7.0 5.0 310 on 6.0 8.0
8 10.0 10.0 660 fiber- 12.0 16.0
12 11.8 15.1 1010 glass- 18.0 24.0
16 13.0 20.0 1360 cylinder 24.0 34.0

Wind load with cylinder

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
60
TV Transmitting Antenna
(Superturnstile Antenna) 174 – 230 MHz
K 52 97 5. .

Typical Horizontal Radiation Pattern Vertical Radiation Patterns

(at mid-band)
Examples of typical vertical
radiation patterns*) for several bays
of identical, vertically stacked
antenna arrays.

2 bays
100

174 – 230 MHz

Systems
E rel

50

10

0 10 20 30 α° 40
dB

4 bays
100
E rel

50

0 10 20 30 α° 40

8 bays
100
E rel

50

0 10 20 30 α° 40

12 bays
100
E rel

50

0 10 20 30 α° 40

*) without null fill

with null fill and beam tilt
61
TV Transmitting Antenna
with dipole panels K 52 30 5. .
174 – 230 MHz
● Typical antenna array with dipole panels K 52 30 5. .
● The feeder network is made up of coaxial power splitters and flexible connecting cables
in accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 174 – 230 MHz
VSWR < 1.05 in the operating channel after tuning
or < 1.1 in the whole range
Impedance 50 Ω

1600 mm
Polarization Horizontal or vertical
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Radiation pattern The examples of radiation patterns are valid
for horizontal polarization.
At vertical polarization patterns vary slightly.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).

H
The 2 halves are connected by a
2-way power splitter or patch panel.
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).
Grounding Via mounting parts.
Max. wind velocity 225 km/h / 200 km/h

No. Panels Gain* Weight Antenna Windload

of per (at mid-band) (without mounting height H (v = 160 km/h)
bays bay dB times hardware) kg m kN
2 5.5 3.5 66 1.1
1 3 4.3 2.7 94 1.3 1.85
4 3.1 2.0 122 2.2

2 8.5 7.1 122 2.2

2 3 7.3 5.4 173 2.9 3.7
4 6.1 4.1 224 4.4

2 11.5 14.1 224 4.4

4 3 10.3 10.7 346 6.1 7.4
4 9.1 8.1 453 8.8

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.4 dB
null fill: 0.2 – 0.5 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
62
TV Transmitting Antenna
with dipole panels K 52 30 5. .
174 – 230 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 1 bay

E rel

174 – 230 MHz

Systems
50

0
0 10 20 30 40 50
α°

2 bays
E rel

50
10 10
dB

dB

3 3

0 0 0
0 10 20 30 40 50
α°

Equal power splitting Different power splitting 3 bays

4/6 P E rel
1/6 P

50

0
1/6 P 0 10 20 30 40 50
α°

4 bays
E rel

50

10 10
dB
dB

3 3
0
0 0 0 10 20 30 40 50
α°

63
Combined Antenna Systems for TV and DAB
TV: 174 – 223 MHz DAB: 174 – 240 MHz
K 53 32 5. .
● Dual-polarized antenna systems for simultaneous
transmission of DAB and TV.

TV DAB

Frequency range 174 – 223 MHz 174 – 240 MHz

VSWR < 1.05 1.1
in the operating

1600 mm
channels after tuning
Polarization Horizontal Vertical
Input Connectors according to IEC, EIA or DIN.
Impedance 50 Ω
Max. power According to customer’s requirements.
Max. wind velocity 225 km/h

Internal connections: Connectors according to IEC, EIA or DIN are

used throughout the system, allowing easy
assembly and maintenance.

Vertical radiation pattern: Null fill and beam tilt on request.

Horizontal radiation pattern: Omnidirectional, directional or custom-designed.

Different radiation patterns for TV and DAB can
be realized.

Half antenna splitting: Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a 2-way power
splitter or patch panel.

Pressurization: Splitters and connecting cables can be supplied

with dry air (please specify when ordering).

Painting: If required, the antenna is painted in aviation

warning colours.

Grounding: Via mounting parts.

64
 Antennas for TV and DAB in upper VHF Band
174 – 230 MHz

Model Types:
K 52 07 5. ., K 52 14 5. ., K 52 17 5. ., K 52 22 5. ., K 52 30 5. .,
K 52 31 5. ., K 52 33 5. ., K 52 34 5. ., K 52 40 5. ., K 53 20 5. .,
K 53 31 5. ., K 53 32 5. ., K 53 33 5. ., K 53 36 5. ., K 53 37 5. .,
K 53 40 5. .,
Type No. Description Frequency range Gain Polarization Page

K 52 30 5. Directional Antenna, steel 174 – 230 MHz 8.0 dB horizontal 66

or vertical
K 52 33 5. Directional Antenna, steel 174 – 230 MHz 11.0 dB horizontal 67
K 53 33 5. Directional Antenna, steel 174 – 254 MHz 11.0 dB vertical 68
K 52 34 5.. Directional Antenna, steel 174 … 230 MHz 7.0 dB horizontal 69
767 141 Directional Antenna, steel 174 – 209 MHz 7.5 dB horizontal 70

174 – 230 MHz

Antennas
773 643 Directional Antenna, steel 174 – 209 MHz 7.5 dB horizontal 70
K 52 31 5. Directional Antenna, aluminum 174 – 230 MHz 7.5 dB horizontal 71
or vertical
768 000 Directional Antenna for TV, steel 174 – 223 MHz 7.5 dB horizontal 72
Directional Antenna for DAB, steel 220 – 240 MHz 7.5 dB vertical
750 10085 Directional Antenna for TV 174 – 223 MHz 7.5 dB linear 73
and DAB/DMB, steel 174 – 240 MHz 4.5 dB circular
K 52 40 5.. 5 Element Yagi Antenna, 174 … 230 MHz 6.0 dB horizontal 74
aluminum
768 494 5 Element Yagi Antenna, 215 – 242 MHz 6.0 dB vertical 75
aluminum
750 10003 5 Element Yagi Antenna, 202 – 230 MHz 6.0 dB vertical 75
aluminum
K 52 17 5.. 15 Element Yagi Antenna, 174 … 230 MHz 8.0 dB horizontal 76
aluminum or vertical
K 52 14 5.. 16 Element Yagi Antenna, 174 … 230 MHz 11.0 dB horizontal 77
aluminum
K 52 07 5.. 15 Element Yagi Antenna, 174 … 230 MHz 8.0 dB horizontal 78
aluminum or vertical
K 52 22 5. Log.-per. Directional Antenna, 174 – 230 MHz 8.5 dB horizontal 79
steel or vertical
769 006 Dipole Antenna for DAB, steel 216 – 240 MHz 5.5 dB vertical 80
773 361 Dipole Antenna for DAB, steel 216 – 240 MHz 5.5 dB vertical 80
772 899 Omnidirectional Antenna for DAB, 216 – 240 MHz 3.0 dB vertical 81
steel
772 900 Omnidirectional Antenna for DAB, 216 – 240 MHz 6.0 dB vertical 81
steel
750 10025 Omnidirectional Antenna for DAB, 216 – 240 MHz 6.0 dB vertical 82
steel
750 10026 Omnidirectional Antenna for DAB, 216 – 240 MHz 3.0 dB vertical 82
steel
776 064 Directional Antenna for DAB, 216 – 240 MHz 11.5 dB vertical 83
steel
766 614 Omnidirectional Antenna, steel 223 – 230 MHz .0 dB vertical 84

65
K 52 30 5. .
Directional Antenna
174 – 230 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for square and round masts.

Type No. K 52 30 57 K 52 30 58
Order No. 600 241 602 036

Input 7-16 female 7/8˝ EIA-flange

(type gas-stop)
Frequency range 174 – 230 MHz
VSWR < 1.08
Gain (ref. to λ/2 dipole) 8 dB at mid-band A
Impedance 50 Ω
Polarization Horizontal or vertical
Max. power 2 kW 2.5 kW
(higher power upon request)
Weight 23 kg C
Wind load (at 160 km/h)
Horizontally polarized frontal / lateral: 750 N / 315 N
Vertically polarized frontal / lateral: 750 N / 375 N
Max. wind velocity 225 km/h B
Packing size 1350 x 1350 x 550 mm
A: 1300 mm
Material: Hot-dip galvanized steel. B: 1300 mm
Weather protection: Fiberglass. C: 490 mm

Mounting: By means of the pair of hot-dip galvanized

steel clamps:
K 61 12 0 to pipes of 60 – 115 mm ∅
K 61 13 0 to pipes of 115 – 210 mm ∅
(please order separately).
Mounting dimensions upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square and round
masts.

Scope of supply: Antenna without mounting clamps.

Radiation Patterns (at mid-band)

64° 64°

10 10
dB

dB

3 3

0 0

in E-Plane in H-Plane

66
K 52 33 5. .
Directional Antenna
174 – 230 MHz
● Horizontally polarized broadband directional antenna
of hot-dip galvanized steel.
● Especially suitable for square masts.
B

Type No. K 52 33 57 K 52 33 58
Order No. 600 261 601 940

Input 7-16 female 7/8˝ EIA-flange

(type gas-stop)
Frequency range 174 – 230 MHz
VSWR < 1.1
Gain (ref. to λ/2 dipole) 11 dB at mid-band A
Impedance 50 Ω
Polarization Horizontal
Max. power 2 kW 2.5 kW

174 – 230 MHz

(higher power upon request)

Antennas
Weight 60 kg
Wind load (at 160 km/h) frontal: 1625 N
lateral: 875 N
Max. wind velocity 225 km/h C
Packing size 2850 x 1350 x 500 mm

Material: Hot-dip galvanized steel.

Weather protection: Fiberglass. A: 2800 mm
B: 1300 mm
Mounting: By means of the pair of hot-dip galvanized C: 415 mm
steel clamps:
K 61 16 01 to pipes of 77 mm ∅
K 61 16 02 to pipes of 60 – 125 mm ∅
(please order separately).
Further mounting hardware and mounting
dimensions upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square masts.

Scope of supply: Antenna without mounting clamps.

Radiation Patterns (at mid-band)

66°

32°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

67
K 53 33 5. .
Directional Antenna
174 – 254 MHz
● Vertically polarized broadband directional antenna
of hot-dip galvanized steel.
B

Type No. K 53 33 57 K 53 33 58
Order No. 601 699 601 939

Input 7-16 female 7/8˝ EIA-flange

(type gas-stop) A
Frequency range 174 – 254 MHz
VSWR < 1.1
Gain (ref. to λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 2 kW 2.5 kW
(higher power upon request)
Weight 55 kg
Wind load (at 160 km/h) frontal: 2.00 kN
lateral: 1.15 kN
Max. wind velocity 225 km/h C
A: 2800 mm
Packing size 2850 x 1350 x 500 mm
B: 1300 mm
C: 400 mm
Material: Hot-dip galvanized steel.
Weather protection: Fiberglass.

Mounting: By means of 8 screws M 16 x 80 to a suitable

construction.
Mounting hardware and mounting dimensions
upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns.

Scope of supply: Antenna with 8 screws M 16 x 80.

Radiation Patterns (at mid-band)

64° 32°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

68
K 52 34 5. .
Directional Antenna
174 … 240 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for triangular and round masts.

B
Type No. K 52 34 517 K 52 34 527
Order No. 601 157 601 835

Input 7-16 female (type gas-stop)

Frequenca range 174 – 202 MHz 202 – 240 MHz
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7 dB
Impedance 50 Ω A
Polarization Horizontal
Max. power 2 kW (higher power upon request)
Weight 20 kg

174 – 230 MHz

Wind load (at 160 km/h) frontal: 375 N

Antennas
lateral: 375 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Weather protection: Fiberglass.

Mounting: By means of the pair of hot-dip galvanized C

steel clamps: A: 1200 mm
K 61 12 0 to pipes of 60 – 115 mm ∅ B: 860 mm
K 61 13 0 to pipes of 115 – 210 mm ∅ C: 405 mm
(please order separately).
Further mounting hardware and mounting
dimensions upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for triangular and round
masts.

Scope of supply: Antenna without mounting clamps.

Radiation Patterns (at mid-band)

80° 56°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

69
K 52 34 5. .
Directional Antenna
174 ... 230 MHz
● Broadband directional antenna of hot-dip galvanized steel.
● Especially suitable for square masts.

Type No. / Order No. 773 643 767 141

Input 7-16 female (type gas-stop)

Frequenca range 174 – 209 MHz 202 – 230 MHz
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7.5 dB

A
Impedance 50 Ω
Polarization Horizontal
Max. power 2 kW (higher power upon request)
Weight 46 kg
Wind load (at 160 km/h) frontal: 1250 N
lateral: 625 N
Max. wind velocity 225 km/h
Packing size 1400 x 1000 x 800 mm

Material: Hot-dip galvanized steel.

Protective cover: Fiberglass.
C

Mounting: Mounting hardware and mounting dimensions

upon request.
A: 1233 mm
Ice protection: Even under severe icy conditions the antenna is B: 872 mm
still functional due to its heavy-duty construction C: 558 mm
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various radiation
patterns. Particularly for square masts.

Scope of supply: Antenna without mounting clamps.

Radiation Patterns (at mid-band)

69° 56°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

70
K 52 31 5. .
Directional Antenna
174 – 230 MHz
● Broadband directional antenna
of weather-resistant aluminum.

Type No. K 52 31 57 K 52 31 51
Order No. 600 256 600 837

Input 7-16 female N female

Frequency range 174 – 230 MHz
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7.5 dB at mid-band
Impedance 50 Ω A
Polarization Horizontal or vertical
by conversion of two clamps
Max. power 500 W

174 – 230 MHz

Weight 7 kg

Antennas
Wind load
Horizontal (160 km/h) frontal / lateral: 440 N / 200 N
Vertical (160 km/h) frontal / lateral: 440 N / 350 N
Max. wind velocity
Horizontal 225 km/h C
Vertical 200 km/h
Packing size 1240 x 1240 x 120 mm
B

Material: Weather-resistant aluminum. A: 1200 mm

B: 1200 mm
Mounting: To pipes of 60 – 115 mm ∅ by means C: 360 mm
of mounting clamps, supplied

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a compo-

nent in arrays to achieve various
radiation patterns.

Special features: The antenna will be shipped dismounted.

Radiation Patterns (at mid-band)

66° 61°

10 10
dB

dB

3 3

0 0

in E-Plane in H-Plane

71
K 53 32 5. .
Directional Antenna for TV and DAB
TV: 174 – 223 MHz / DAB: 220 – 240 MHz
● Dual-polarized antenna.
● Specially designed for simultaneous operation of TV
in Band III and DAB in Channel 12 and Channel 13.
mm
■ 1200

Type No. / Order No. 768 000

Input 1 x 7-16 female / horizontal (type gas-stop)

1 x 7-16 female / vertical (type gas-stop)
Frequency range for
horizontal polarization 1 Channel at Band III
vertical polarization DAB: 220 – 240 MHz
VSWR < 1.15
Gain (ref. to λ/2 dipole) 7.5 dB
Impedance 50 Ω
Polarization TV: horizontal / DAB: vertical
Max. power 2 kW per input
(at 40 °C ambient temperature)
Weight 30 kg
Windload (at 160 km/h) frontal: 815 N
lateral: 570 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass

Mounting: Using M16 screws (supplied) to suitable attach-

ment construction. Antennas K 52 30 5.
may be replaced by 768 000 without altering
mounting fixture.
Mounting dimensions upon request.

Scope of delivery: Antenna supplied without clamps.

Grounding: Via mounting parts.

Radiation Patterns for horizontal polarization Radiation Patterns for vertical polarization
(at mid-band) (at mid-band)

64° 54° 54° 66°

10 10 10 10
dB

dB

dB

dB

3 3 3 3

0 0 0 0

E-plane H-plane H-plane E-plane

Horizontal Radiation Pattern Vertical Radiation Pattern Horizontal Radiation Pattern Vertical Radiation Pattern

72
K 53 32 5. .
Directional Antenna for TV and DAB/DMB
174 – 223 MHz (240 MHz)
● Dual-polarized antenna (horizontal/vertical).
● Optionally circular or slant polarization.

1300 mm

Type No. / Order No. 750 10085

Input 2 x 7-16 female (type gas-stop)

Polarization linear: horizontal, vertical, slant
circular
Frequency range 174 – 223 MHz
for vertical polarization 174 – 240 MHz
VSWR < 1.2 (linear polarization)
< 1.1 (circular polarization)
Gain (ref. to λ/2 dipole) 7.5 dB (linear polarization)
4.5 dB (circular polarization)

174 – 230 MHz

Antennas
Impedance 50 Ω
Max. power 2 kW per input
(at 40 °C ambient temperature)
Weight 35 kg
Windload (at 160 km/h) frontal: 680 N
lateral: 630 N
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel.

Radome: Fiberglass

Mounting: Using M16 screws (supplied) to suitable attach-

ment construction.
Mounting dimensions upon request.

Scope of delivery: Antenna supplied without clamps.

Grounding: Via mounting parts.

Radiation Patterns for horizontal polarization Radiation Patterns for vertical polarization
(at mid-band) (at mid-band)

65° 55° 60° 65°

10 10 10 10
dB
dB

dB

dB

3 3 3 3

0 0 0 0

E-plane H-plane H-plane E-plane

Horizontal Radiation Pattern Vertical Radiation Pattern Horizontal Radiation Pattern Vertical Radiation Pattern

73
K 52 40 5. .
Directional Antenna
174 ... 230 MHz
● 5 element broadband Yagi antenna
of weather-proof aluminum.
● Component for low power transmitting antennas.

Type No. K 52 40 517 K 52 40 527

Order No. 600 265 600 267 A
A

Frequency range 174 – 202 MHz 202 – 230 MHz

(ch = channel) (ch 5 – ch 8) (ch 9 – ch 12)
Dimensions A 930 mm 810 mm
B 885 mm 765 mm
Input 7-16 female
Gain (ref. to λ/2 dipole) 6 dB B
B

VSWR < 1.15

Impedance 50 Ω
Polarization Horizontal
Lengths
Max. power 100 W (higher power upon request) see table
Weight 5 kg
Wind load (at 160 km/h)
frontal: 114 N 102 N
lateral: 102 N 91 N
Max. wind velocity 225 km/h
Packing size 970 x 200 x 135 mm

Material: Weather-proof aluminum.

Radiator in fiberglass radome.

Mounting: To pipes of 60 – 115 mm ∅ by means

of mounting clamps, supplied.

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a

component in arrays to achieve various
radiation patterns.

Special features: The antenna will be shipped dismounted.

Radiation Patterns (at mid-band)

110°
55°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

74
K 53 40 5. .
Directional Antenna for DAB
215 – 242 MHz
● 5 element broadband Yagi antenna
of weather-proof aluminum.
● Component for low power transmitting antennas.
● Especially for DAB.

A
Type No. / Order No. 768 494 750 10033

Frequency range 215 – 242 MHz 202 – 230 MHz

Input 7-16 female
Gain (ref. to λ/2 dipole) 6 dB
VSWR < 1.2
Impedance 50 Ω
Polarization Vertical
Max. power 400 W
Weight 5 kg
Wind load (160 km/h) frontal: 100 N

174 – 230 MHz

Antennas
lateral: 150 N

B
Max. wind velocity 225 km/h
Packing size 970 x 200 x 135 mm

Material: Weather-proof aluminum.

Radiator in fiberglass radome.

Mounting: To pipes of 60 – 115 mm ∅ by means

of mounting clamps, supplied.
Attention: Mounting must be done with waterho- A: 830 mm
le downwards. B: 765 mm waterhole

Grounding: Via mounting parts.

Combinations: The antenna is especially suitable as a compo-

nent in arrays to achieve various
radiation patterns.

Special features: The antenna will be shipped dismounted.

Radiation Patterns (at mid-band)

110°
55°

10 10
dB

dB

3 3

0 0

in H-Plane in E-Plane
Horizontal Radiation Pattern Vertical Radiation Pattern

75
K 52 17 5. .
Directional Antenna
174 … 230 MHz
● 15 element broadband Yagi antenna of weather-proof aluminum.

110

Lengths see table Mounting flange 85 ø 11 110

85 mm

Type No. K 52 17 517 K 52 17 527 K 52 17 537

Radiation Patterns
Order No. 600 890 600 891 600 892 (at mid-band)
Frequency range 174 – 188 MHz 188 – 209 MHz 209 – 230 MHz
Input 7-16 female
62°
VSWR < 1.15
Gain (ref. to λ/2 dipole) 8 dB
Impedance 50 Ω
Polarization Horizontal or vertical 10
Max. power 100 W (higher power upon request)
Weight 14 kg 12.7 kg 12 kg
dB
3
Dimensions (Lengths)
0
L1 2000 mm 1850 mm 1700 mm
L2 1200 mm 1100 mm 950 mm in E-plane
L3 900 mm 850 mm 750 mm
Wind load (at 160 km/h) frontal / lateral: frontal / lateral: frontal / lateral:
horizontal: 364 N / 313 N 330 N / 290 N 290 N / 280 N
60°
vertical: 427 N / 540 N 404 N / 490 N 364 N / 427 N
Max. wind velocity
horizontal: 225 km/h 225 km/h 225 km/h
vertical: 190 km/h 225 km/h 225 km/h 10
Packing size 2040 x 170 x 170 mm 1900 x 170 x 170 mm 1750 x 170 x 170 mm
dB

3
Material: Elements: Weather-proof aluminum.
Dipole cover: Fiberglass. 0

Support and flange: Hot-dip galvanized steel. in H-plane

Mounting: By means of mounting flange, supplied.

Grounding: Via mounting parts.

Combinations: Two or more antennas can be combined to

achieve higher gain and longer, narrower beam
width.

Special features: The antenna is shipped dismounted.

76
K 52 14 5. .
Directional Antenna
174 … 230 MHz
● 16 element Yagi antenna of weather-proof aluminum.

D
B

174 – 230 MHz

Antennas
Lengths see table

Type No. K 52 14 517 K 52 14 527

Radiation Patterns
Order No. 600 206 600 208 (at mid-band)
Frequency range 174 – 202 MHz 202 – 230 MHz
(ch = channel) (ch 5 – ch 8) (ch 9 – ch 12) 44°
Input 7-16 female
VSWR < 1.15
Gain (ref. to λ/2 dipole) 11 dB
Impedance 50 Ω
10
Polarization Horizontal
Max. power 100 W (higher power upon request)
dB

3
Weight 12 kg 11 kg
Dimensions (Lengths) A 3360 mm 2900 mm 0

B 2060 mm 2000 mm in E-plane

Horizontal Radiation Pattern
C 880 mm 760 mm
D 955 mm 825 mm
Wind load (at 140 km/h)
frontal: 210 N 185 N 48°
lateral: 290 N 250 N
Max. wind velocity 140 km/h
Packing size 3350 x 170 x 170 mm 2880 x 170 x 170 mm
10
Material: Support: Weather-proof aluminum. Dipole cover:
Fiberglass. Clamp: Hot-dip galvanized steel.
dB

0
Mounting: To pipes of 60 – 115 mm ∅ by means
in H-plane
of mounting clamp, supplied.
Vertical Radiation Pattern

Grounding: Via mounting parts.

Combinations: Two or more antennas can be combined to

achieve higher gain and longer, narrower beam
width.

Special features: The antenna is shipped dismounted.

77
K 52 07 5. .
Directional Antenna
174 … 230 MHz
● Particularly light 15 element Yagi antenna of weather-proof aluminum.

Lengths see table

Type No. K 52 07 517 K 52 07 527 K 52 07 537

Radiation Patterns
Order No. 601 515 601 516 601 517 (at mid-band)
Frequency range 174 – 188 MHz 188 – 209 MHz 209 – 230 MHz
Input 7-16 female 53°
VSWR < 1.2
Gain (ref. to λ/2 dipole) 8 dB
Impedance 50 Ω
Polarization Horizontal or vertical by conversion of the U-bolts 10
Max. power 100 W (higher power upon request)
Weight 7.5 kg 7.2 kg 6.8 kg
dB
3
Dimensions (Lengths) A 2010 mm 1865 mm 1720 mm
0
B 1020 mm 940 mm 840 mm
C 900 mm 850 mm 760 mm in E-plane
Wind load (at 160 km/h) frontal / lateral: frontal / lateral: frontal / lateral:
horizontal: 239 N / 279 N 222 N / 267 N 199 N / 250 N
vertical: 239 N / 313 N 222 N / 290 N 199 N / 250 N 68°
Max. wind velocity 225 km/h
Packing size 2040 x 170 x 170 mm 1900 x 170 x 170 mm 1760 x 170 x 170 mm

Material: Weather-proof aluminum: Dipole cover: Hostalen.

10

Mounting: To pipes of 57 – 105 mm ∅ by means

dB

3
of supplied U-bolts.
0

Grounding: Via mounting parts. in H-plane

Combinations: Two or more antennas can be combined to

achieve higher gain and longer, narrower beam
width.

Special features: The antenna is shipped dismounted.

78
K 52 22 5. .
Directional Antenna
174 – 230 MHz
● Logarithmic-periodic broadband directional antenna
with high side-lobe suppression.
● Especially rugged design of hot-dip galvanized steel.

Type No. K 52 22 57 K 52 22 51
Order No. 600 234 601 340

Input 7-16 female N female

Frequency range 174 – 230 MHz
VSWR < 1.2
Gain (ref. to λ/2 dipole) 8.5 dB at mid-band
Impedance 50 Ω
Side-lobe suppression > 25 dB
Polarization Horizontal or vertical by conversion
of two clamps B

174 – 230 MHz

Max. power 1 kW (higher power upon request) A

Antennas
Weight 27 kg
Wind load (at 160 km/h)
horizontal: frontal / lateral: 250 N / 500 N
vertikal: frontal / lateral: 250 N / 313 N
Max. wind velocity 225 km/h A: 2300 mm
B: 890 mm
Packing size 2450 x 290 x 1100 mm

Material: Hot-dip galvanized steel.

Mounting: To pipes of 60 – 115 mm ∅ by means

of mounting clamps, supplied.

Grounding: Via mounting parts.

Combinations: Several antennas can be combined to increase

the gain and to produce radiation patterns with
very high side-lobe suppressions.

Radiation Patterns (at mid-band)

53° 68°

10 10
dB

dB

3 3

0 0

in E-plane in H-plane

79
K 53 36 5. .
Dipole Antenna for DAB
216 – 240 MHz
● Dipole antenna for side-mounting to masts.

Type No. / Order No. 769 006 773 361

Input 7-16 female 7-16 female

(type gas-stop)
Frequency range 216 – 240 MHz 184 – 230 MHz
VSWR < 1.2 < 1.3
Gain (ref. to λ/2 dipole) 5.5 dB in preferred direction B
Impedance 50 Ω
Polarization Vertical
A
Max. power 2 kW (at 40 °C ambient temperature)
Weight 15 kg
Wind load (160 km/h) frontal: 240 N
lateral: 440 N
Max. wind velocity 225 km/h
Packing size 2310 x 420 x 160 mm

Material: Hot-dip galvanized steel.

Radome: Fiberglass.
D
Mounting: Laterally using 8 screws M 12 x 50 to suitable
flange (see draft).

Ice protection: Even under severe icy conditions the antenna is A: 2205 mm
still functional due to its heavy-duty construction B: 1100 mm
and the fiberglass covers for the feeding points. C: 372 mm
D: 315 mm
Grounding: Via mounting parts.

Note: The radiation in the mast direction will be

reduced proportionally to the size of the mast.

Radiation Patterns (at mid-band) Flange

32°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

80
K 53 20 5. .
Omnidirectional Antenna for DAB
216 – 240 MHz

Type No. / Order No. 772 899 772 900

Input 7-16 female (type gas-stop)

Frequency range 216 – 240 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 3 dB 6 dB
Impedance 50 Ω
Polarization Vertical
Max. power 1 kW 2 kW
(higher power upon request)
Weight 37 kg 67 kg

174 – 230 MHz

Antennas
Windload (at 160 km/h) 500 N 900 N
Max. wind velocity 200 km/h
Length 2900 mm 5000 mm
Radome diameter 186 mm
Packing size 3030 x 400 x 400 mm 5230 x 400 x 400 mm

Material: Radiator: Hot-dip galvanized steel.

Radome: Fiberglass, brown.
Antenna base: Aluminum.

Mounting: With standard flange with 320 mm diameter.

Attention: The aluminum flange may only be

mounted to a flat base-plate (max. unevenness
0.5 mm) with a suitable drilled hole in the center
for the both 7-16 connectors.
Fastening torque MA = 50 Nm
(MoS2-lubricated; washer acc. DIN 125 between
casted flange and bolt head)

Grounding: Continuous earth connection between antenna

tip and base.

Remark: Special versions with higher input power or

modified frequency range or electrical beam tilt
are available upon request.

Bottom view
Vertical Radiation Patterns
(at mid-band, beamtilt ≈1°) 7-16 female

28° 14°

10
10
dB

dB

3 3 ∅ 18
0 0 280
772 899 772 900 320

81
K 53 20 5. .
Omnidirectional Antenna for DAB
216 – 240 MHz

Type No. / Order No. 750 10026 750 10025

Input 2 x 7-16 female (type gas-stop)

Frequency range 216 – 240 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 3 dB 6 dB
Impedance 50 Ω
Polarization Vertical
Max. power 2 x 1 kW 2 x 2 kW
(at 40 °C ambient temperature)
Weight 42 kg 73 kg
Windload (at 160 km/h) 500 N 900 N
Max. wind velocity 200 km/h
Length 2900 mm 5000 mm
Radome diameter 186 mm
Packing size 3030 x 400 x 400 mm 5230 x 400 x 400 mm

Material: Radiator: Hot-dip galvanized steel.

Radome: Fiberglass, brown.
Antenna base: Aluminum.

Mounting: With standard flange with 320 mm diameter.

Attention: The aluminum flange may only be

mounted to a flat base-plate (max. unevenness
0.5 mm) with a suitable drilled hole in the center
for the both 7-16 connectors.
Fastening torque MA = 50 Nm
(MoS2-lubricated; washer acc. DIN 125 between
casted flange and bolt head)

Grounding: Continuous earth connection between antenna

tip and base.

Remark: Special versions with higher input power or

modified frequency range or electrical beam tilt
are available upon request.

Bottom view
2 x 7-16 female
Vertical Radiation Patterns
(at mid-band)

28° 14°

10
10
dB

dB

3 3 ∅ 18
0 0 280
750 10026 750 10025 320

82
K 53 31 5. .
Directional Antenna for DAB
216 – 240 MHz
● Especially designed for operation in DAB.
● Suitbale for omnidirectional pattern with 5 panels in one bay.

Type No. / Order No. 776 064

Input 7-16 female (type gas-stop)

Frequency range 216 – 240 MHz (219 – 233 MHz)
VSWR < 1.15 (< 1.10)
Gain (ref. to λ/2 dipole) 11.5 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 2 kW
(higher power upon request)
Weight 50 kg

174 – 230 MHz

Antennas
Wind load (at 160 km/h) frontal: 1050 N
lateral: 1200 N
Max. wind velocity 225 km/h
Packing size 2530 x 1330 x 680 mm

Material: Hot-dip galvanized steel.

Weather protection: Fiberglass.

Mounting: By means of 4 screws M 16 x 40 to a suitable

construction.
Mounting hardware upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
35

30
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

∅ 18

Combinations: The antenna is especially suitable as a

2400

1200

component in arrays to achieve various radiation

patterns. 7-16 female

Scope of supply: Antenna with 4 screws M 16 x 40.

60

Radiation Patterns (at mid-band) 1200

5 250

52° 28°

10 10
dB

dB

3 3

0 0

in H-plane in E-plane
Horizontal Radiation Pattern Vertical Radiation Pattern

83
K 53 37 5. .
Omnidirectional Antenna
223 – 230 MHz

● Omnidirectional broadband antenna for mounting on the mast top.

ø 70

Type No. / Order No. 766 614

Input 7-16 female

Frequency range 223 – 230 MHz
VSWR < 1.3
Impedance 50 Ω
Gain (ref. λ/2 dipole) 0 dB
Polarization Vertical

1074
Max. power 1 kW
Weight 6 kg
Wind load approx. 60 N (at 160 km/h)
Max. wind velocity 225 km/h

Material: Hot-dip galvanized steel. All screws and nuts:

Stainless steel.

Mounting: To standard flange with diameter 130 mm,

with 4 screws M 12.

ø 14 (4x)
Grounding: Via mounting parts.

ø 100
ø 130

Radiation patterns
(at mid-band)

78°

0 3 10 0 3 10

10 10
dB
dB

3 3
ø 100
0 0 ø 130
H-plane E-plane Flange
Horizontal radiation pattern Vertical radiation pattern

84
Antenna Systems
470 – 862 MHz

470 – 862 MHz

Systems

85
TV Transmitting Antenna with panels
K 72 30 4. . – K 72 32 4. . or K 73 30 4. . – K 73 32 4. .
470 – 862 MHz
● Antenna systems consisting of dipole panels K 72 30 4. . – K 72 32 4. . or
K 73 30 4. . – K 73 32 4. . for various radiation patterns.
● The feeder network is made up of coaxial power splitters and flexible connecting cables
in accordance with the radiation patterns specification and the transmitting power.

Input Connectors according to IEC, EIA or DIN.

Frequency range 470 – 862 MHz
VSWR < 1.05 in the operating channels after tuning.
Impedance 50 Ω
Polarization Horizontal with dipole panels
K 72 30 4. . – K72 32 4. .

1150 mm
or vertical with dipole panels
K 73 30 4. . – K 73 32 4. .
Internal connections Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Max. power According to customer’s requirements.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional, directional or custom-designed.
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.

H
Pressurization Splitters and connecting cables can be supplied
with dry air (please specify when ordering).
Painting If required, the antenna is painted in aviation
warning colours.
Structure 2 versions are available: a) Panels mounted on
hot-dip galvanized steel spine.
b) Panels mounted inside self-supporting
fiberglass cylinder (1.6 m ∅)
Grounding Via mounting parts.
Max. wind velocity As required.

No. Panels Gain* Weight Antenna Windload / kN**

of per (at mid-band) (without height H (v = 160 km/h)
bays bay dB times mounting m with with
hardware) spine cylinder
kg 1.6 m ∅
2 15.2 33.1 120
4 3 13.6 22.9 160 4.45 6.0 6.0
4 12.3 17.0 210

2 17.0 50.1 170

6 3 15.4 34.7 240 6.75 9.5 9.0
4 14.1 25.7 330

2 18.2 66.1 240

8 3 16.6 45.7 320 9.05 13.0 12.0
4 15.3 33.9 420

2 20.0 100.0 350

12 3 18.4 69.2 490 13.65 20.5 18.0
4 17.1 51.3 670

2 21.2 131.8 450

16 3 19.6 91.2 690 18.25 28.0 24.0
4 18.3 67.6 890

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
** Average values, depending on design and arrangement.

86
TV Transmitting Antenna with panels
K 72 30 4. . – K 72 32 4. . or K 73 30 4. . – K 73 32 4. .
470 – 862 MHz

Horizontal Radiation Patterns Vertical Radiation Patterns

Examples of typical horizontal Examples of typical vertical

antenna arrays and their horizontal radiation patterns radiation patterns*) for several bays
for minimal mast dimensions. of identical, vertically stacked
antenna arrays.

Equal power splitting 4 bays

100
E rel

50

0 5 α° 10

470 – 862 MHz

Systems
8 bays
100
E rel

50
10 10
dB
dB

3 3
0 5 α° 10
0 0

Equal power splitting Different power splitting

12 bays
4/10 P 100
E rel
1/10 P

1/10 P

50

4/10 P 0 5 α° 10

16 bays
100
E rel

50
10 10
dB

dB

3 3
0 5 α° 10
0 0

*) without null fill

with null fill and beam tilt
87
TV Transmitting Antenna
(Superturnstile Antenna) 470 – 862 MHz
K 72 20 4. .
● Superturnstile antenna in a self-supporting fiberglass cylinder with 1.60 m diameter.

Input Connectors according to IEC, EIA or DIN.

Frequency range 470 – 862 MHz
VSWR < 1.05 in operating channels
Impedance 50 Ω
Polarization Horizontal

1125 mm
Max. power According to customer’s requirements,
10 kW max. per bay.
Vertical radiation pattern Null fill and beam tilt upon request.
Horizontal radiation pattern Omnidirectional
Half antenna splitting Upon request, the antenna can be divided into
2 halves (for measurement and maintenance).
The 2 halves are connected by a
2-way power splitter or patch panel.
Internal connections The radiating elements are fed with

H
coaxial connecting cables and hybrid couplers.
Connectors according to IEC, EIA or DIN
are used throughout the system,
allowing easy assembly and maintenance.
Structure Superturnstile antenna in self-supporting
fiberglass-cylinder.
Up to 16 bays may be stacked.
Mounting On top of existing structure by means of a flange.
Ice protection Fiberglass-cylinder (= supporting structure)
Grounding Via mounting parts resp. via 4 grounding ropes
at the exterior cylinder-surface.

No. Gain* Weight Antenna Windload

of (at mid-band) (with cylinder) height H (v = 160 km/h)
bays dB times kg m kN
2 7.0 5.0 400 2.25 3.0
4 10.0 10.0 800 4.5 6.0
8 13.0 20.0 1600 9.0 12.0
12 14.8 30.2 2600 13.5 18.0
16 16.0 39.8 3600 18.0 24.0

* Referred to λ/2 dipole. Attenuation of the internal cabling and the gain-decrease
in case of null fill in the vertical radiation pattern are not considered.
Approximate values for gain decrease:
cable attenuation: 0.2 – 0.5 dB
null fill: 0.3 – 1.0 dB
Gain figures are valid for the direction of maximum radiation (see diagrams on
following page).
88
TV Transmitting Antenna
(Superturnstile Antenna) 470 – 862 MHz
K 72 20 4. .

Typical Horizontal Radiation Pattern Vertical Radiation Patterns

(at mid-band)
Examples of typical vertical
radiation patterns*) for several bays
of identical, vertically stacked
antenna arrays.

4 bays
100
E rel

50

10
dB

3
0 5 α° 10
0

470 – 862 MHz

Systems
8 bays
100
E rel

50

0 5 α° 10

12 bays
100
E rel

50

0 5 α° 10

16 bays
100
E rel

50

0 5 α° 10
*) without null fill
with null fill and beam tilt
89
90
 Antennas for TV in UHF Band
470 – 862 MHz
Model Types:
K 72 20 4. ., K 72 23 4. ., K 72 31 4. ., K 72 31 5. .,
K 72 32 4. ., K 72 36 4. ., K 73 30 4. ., K 73 30 5. .,
K 73 31 4. ., K 73 31 6. ., K 73 32 4. ., K 73 33 4. .,

Type No. Description Frequency range Gain Polarization Page

K 72 36 4. Directional Antenna, aluminum 470 – 790 MHz 8.0 dB horizontal 93

K 72 31 4. Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 94
715 022 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 94
774 038 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 039 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 040 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 041 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 046 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 047 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 95
774 052 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 96
776 165 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97
776 166 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97
776 167 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97

470 – 862 MHz

776 168 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97

Antennas
776 202 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97
776 203 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 97
K 73 31 4. Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 98
769 731 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 99
750 10082 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 100
750 10083 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB vertical 100
750 10045 Directional Antenna, aluminum 470 – 860 MHz 10.5 dB vertical 101
750 10046 Directional Antenna, aluminum 470 – 860 MHz 10.5 dB vertical 101
750 10047 Directional Antenna, aluminum 470 – 860 MHz 10.5 dB vertical 101
750 10016 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 102
750 10017 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 102
750 10031 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 102
750 10032 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 102
772 549 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
772 550 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
772 999 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
773 000 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
773 332 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
773 333 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
750 10012 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
750 10013 Directional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 103
K 72 31 57 Directional Antenna, aluminum 646 – 860 MHz 10.0 dB horizontal 104
776 015 Directional Antenna, aluminum 646 – 860 MHz 10.0 dB horizontal 104
...

91
 Antennas for TV in UHF Band
470 – 860 MHz

Type No. Description Frequency range Gain Polarization Page

K 72 23 4. Log.-per Directional Antenna, 470 – 860 MHz 9.0 dB horizontal 105

aluminum or vertical
761 327 Log.-per Directional Antenna, 470 – 860 MHz 9.0 dB horizontal 105
aluminum or vertical
767 006 Omnidirectional Antenna, aluminum 470 – 860 MHz 5.0 dB horizontal 106
770 881 Omnidirectional Antenna, aluminum 470 – 860 MHz 8.0 dB horizontal 106
771 304 Omnidirectional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 107
775 861 Omnidirectional Antenna, aluminum 470 – 860 MHz 11.0 dB horizontal 107
750 10060 Omnidirectional Antenna, aluminum 470 – 702 MHz 3.0 – 4.5 dB vertical 108
750 10062 Omnidirectional Antenna, aluminum 470 – 702 MHz 5.5 – 7.0 dB vertical 109
750 10112 Omnidirectional Antenna, 470 – 502 MHz 6.5 dB vertical 110
copper and brass
750 10113 Omnidirectional Antenna, 502 – 534 MHz 7.0 dB vertical 110
copper and brass
750 10114 Omnidirectional Antenna, 534 – 574 MHz 7.5 dB vertical 110
copper and brass
750 10115 Omnidirectional Antenna, 574 – 614 MHz 7.5 dB vertical 110
copper and brass
750 10116 Omnidirectional Antenna, 614 – 662 MHz 8.0 dB vertical 110
copper and brass
750 10117 Omnidirectional Antenna, 654 – 702 MHz 8.0 dB vertical 110
copper and brass
750 10118 Omnidirectional Antenna, 694 – 750 MHz 8.5 dB vertical 110
copper and brass
750 10120 Directional Indoor Antenna, brass 470 – 534 MHz 5.0 dB vertical 111
750 10122 Directional Indoor Antenna, brass 534 – 614 MHz 5.0 dB vertical 111
750 10124 Directional Indoor Antenna, brass 614 – 702 MHz 5.0 dB vertical 111
750 10125 Directional Indoor Antenna, brass 702 – 750 MHz 5.0 dB vertical 111
750 10130 Omnidirectional Indoor Antenna, 470 – 558 MHz 0 dB vertical 112
aluminum
750 10131 Omnidirectional Indoor Antenna, 550 – 638 MHz 0 dB vertical 112
aluminum
750 10132 Omnidirectional Indoor Antenna, 574 – 702 MHz 0 dB vertical 112
aluminum
750 10128 Bidirectional Antenna, 470 – 860 MHz 2 dB vertical 113
tin plated copper

92
K 72 36 4.
Directional Antenna
470 – 790 MHz
● Horizontally polarized broadband directional antenna made
of aluminum and protected by a fiberglass cover.

Type No. K 72 36 47 K 72 36 41 A
Order No. 601 787 601 921

Input 7-16 female N female

Frequency range 470 – 790 MHz
VSWR s < 1.12
Gain (ref. λ/2 dipole) 8 dB at mid-band
Impedance 50 Ω
B
Polarization Horizontal
Max. power 500 W (higher power upon request)
Weight 6 kg
Wind load (at 160 km/h) Frontal: 250 N
Rearside: 375 N
Lateral: 125 N
C
Max. wind velocity 225 km/h
Packing size 567 x 567 x 294 mm

Material: Reflector screen and dipoles: Weather-resistant A = B: 500 mm

aluminum. Protective cover: Fiberglass. C: 190 mm
Colour: White, upon request orange.
Attachment elbow: Hot-dip galvanized steel.

Attachment: E.g. by using clamps K 61 14 0… to tubular

(please order masts of 40 – 521 mm diameter.

470 – 862 MHz

Antennas
separately) Further attachment parts and mounting
dimensions upon request.

Grounding: Via mounting parts.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of delivery: Directional antenna with one weather protection

unit each for straight connectors and elbow
connectors.

Radiation Patterns (at mid-band)

61° 61°
Weather protection
400

10 10

190
mm
dB

dB

3 3

0 0

in E-plane in H-plane
All dimensions in mm
Horizontal Radiation Pattern Vertical Radiation Pattern

93
K 72 31 4. .
Directional Antenna
470 – 860 MHz
● Horizontally or vertically polarized broadband directional
antenna made of aluminum and protected by a fiberglass
cover.
500
Type No. K 72 31 47 715 022
Order No. 601 417

Input 7-16 female 13-30 female

Frequency range 470 – 860 MHz
VSWR s < 1.1
Gain (ref. λ/2 dipole) 11 dB at mid-band
Polarization Horizontal
Max. power 1 kW 2 kW
Wind load (at 160 km/h) Frontal: 565 N

1000
Rearside: 815 N
Lateral: 250 N
Max. wind velocity 225 km/h
Weight 12 kg
Packing size 1062 x 562 x 275 mm Horizontal
Height/width/depth 1000 x 500 x 190 mm polarization

Material: Reflector screen and dipoles: Weather-resistant

aluminum. Protective cover: Fiberglass.
190
Attachment elbow: Hot-dip galvanized steel.

Attachment: E.g. by using clamps K 61 14 0… to tubular

(please order masts of 40 – 521 mm diameter.
separately) Further attachment parts and mounting
dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of supply: Directional antenna with one weather protection

unit each for straight connectors and elbow
connectors.

Weather
protection
910

Radiation Patterns (at mid-band)

62°

28°

19
0
10 10

K 72 31 47
dB

dB

3 3

0 0
All dimensions in mm
Horizontal Pattern Vertical Pattern

94
K 72 31 4. .
Directional Antenna
470 – 860 MHz

● Horizontally polarized broadband directional antenna

made of aluminum and protected by a fiberglass cover.
500
● Similar to type K 72 31 47.

Type No. white 774 040 774 046 774 038

Order No. orange 774 041 774 047 774 039

Input (from below) 7-16 female 13-30 female 7/8″ EIA-flange

Frequency range 470 – 860 MHz
VSWR < 1.1
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω

1000
Polarization Horizontal
Max. power 1 kW 2 kW 1.5 kW
Weight 12 kg
Wind load (at 160 km/h) Frontal: 565 N
Horizontal
Rearside: 815 N
polarization
Lateral: 250 N
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm 190

Material: Reflector screen and dipoles: Weather-resistant

aluminum.
Protective cover: Fiberglass.

470 – 862 MHz

Attachment plate: Hot-dip galvanized steel.

Antennas
Attachment: Using M 8 x 35 screws (supplied) to suitable
attachment construction.
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of supply: The 7-16 female connector is supplied

with a weather protection unit.
Weather
protection
1020

Radiation Patterns (at mid-band)

62°

28°

10 10
dB

64
dB

3 3

0 0
774 040
in E-plane in H-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

95
K 72 31 4. .
Directional Antenna
470 – 860 MHz

● Horizontally polarized broadband directional antenna

made of aluminum and protected by a fiberglass cover.
500
● Similar to type K 72 31 47.

Type No. / Order No. 774 052

Input (from below) 7-16 female

Polarization Horizontal
VSWR s < 1.1
Gain (ref. λ/2 dipole) 11 dB at mid-band
Frequency range 470 – 860 MHz

1000
Max. power 1 kW
Wind load (at 160 km/h) Frontal: 565 N
Rearside: 815 N
Lateral: 250 N
Max. wind velocity 225 km/h
Horizontal
Weight 12 kg polarization
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm

Material: Reflector screen and dipoles: Weather-resistant

190
aluminum. Protective cover: Fiberglass.
Colour: White, upon request orange.
Attachment elbow and attachment plate: Hot-dip
galvanized steel.

Attachment: E.g. by using clamps K 61 14 0… to tubular

(please order masts of 40 – 521 mm diameter.
separately) Further attachment parts and mounting dimen-
sions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of supply: Directional antenna with one weather protection

unit. Weather
protection
910

Radiation patterns (at mid-band)

62°

28°

19
10
0
10
dB

dB

3 3

0 0

in E-plane in H-plane All dimensions in mm

Horizontal Pattern Vertical Pattern

96
K 73 31 4. .
Directional Antenna
470 – 860 MHz

● Vertically polarized broadband directional antenna made

of aluminum and protected by a fiberglass cover.
500
● Similar to type K 73 31 47.

Type No. white 776 165 776 167 776 202

Order No. orange 776 166 776 168 776 203

Input (from below) 7-16 female 13-30 female 7/8″ EIA-flange

Frequency range 470 – 860 MHz
VSWR < 1.12
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω

1000
Polarization Vertical
Max. power 1 kW 2 kW 1.5 kW
Weight 12 kg
Wind load (at 160 km/h) Frontal: 565 N
Vertical
Rearside: 815 N
polarization
Lateral: 250 N
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm 190

Material: Reflector screen and dipoles: Weather-resistant

aluminum.
Protective cover: Fiberglass.

470 – 862 MHz

Attachment plate: Hot-dip galvanized steel.

Antennas
Attachment: Using M 8 x 35 screws (supplied) to suitable
attachment construction.
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.
52

Scope of supply: The 7-16 female connector is supplied Weather

with a weather protection unit. protection
1020

Radiation Patterns (at mid-band)

62°

28°

10 10
dB

64
dB

3 3

0 0

in H-plane in E-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

97
K 73 31 4. .
Directional Antenna
470 – 860 MHz
● Horizontally or vertically polarized broadband directional
antenna made of aluminum and protected by a fiberglass
cover.
500
Type No. K 73 31 41 K 73 31 47
Order No. 601 492 601 709

Input N female 7-16 female

Frequency range 470 – 860 MHz
VSWR s < 1.12
Gain (ref. λ/2 dipole) 11 dB at mid-band
Polarization Vertical
Max. power 0.5 kW 1 kW
Wind load (at 160 km/h) Frontal: 565 N

1000
Rearside: 815 N
Lateral: 250 N
Max. wind velocity 225 km/h
Weight 12 kg
Packing size 1062 x 562 x 275 mm Vertical
Height/width/depth 1000 x 500 x 190 mm polarization

Material: Reflector screen and dipoles: Weather-resistant

aluminum. Protective cover: Fiberglass.
190
Attachment elbow: Hot-dip galvanized steel.

Attachment: E.g. by using clamps K 61 14 0… to tubular

(please order masts of 40 – 521 mm diameter.
separately) Further attachment parts and mounting
dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of supply: Directional antenna with one weather protection

unit each for straight connectors and elbow
connectors. Weather
52

protection
910

Radiation Patterns (at mid-band)

62°

28°

19
0
10 10
dB

dB

3 3

0 0
All dimensions in mm
Horizontal Pattern Vertical Pattern

98
K 73 31 4. .
Directional Antenna
470 – 860 MHz

● Vertically polarized broadband directional antenna made

of aluminum and protected by a fiberglass cover.
500
● Similar to type K 73 31 47.

Type No. / Order No. 769 731

Input 7-16 female

Frequency range 470 – 860 MHz
VSWR < 1.12
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω

1000
Polarization Vertical
Max. power 1 kW
Weight 12 kg
Wind load (at 160 km/h) Frontal: 565 N
Rearside: 815 N
Vertical
Lateral: 250 N polarization
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm
190
Material: Reflector screen and dipoles: Weather-resistant
aluminum.
Protective cover: Fiberglass.
Attachment plate: Hot-dip galvanized steel.

470 – 862 MHz

Antennas
Attachment: Using M 8 x 35 screws (supplied) to suitable
attachment construction.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of supply: The 7-16 female connector is supplied

Weather
with a weather protection unit. protection
52

1020

Radiation Patterns (at mid-band)

1962°
0
28°

10 10
dB

64
dB

3 3

0 0

in H-plane in E-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

99
K 73 31 4. .
Directional Antenna
470 – 860 MHz

● Vertically polarized broadband directional antenna

made of aluminum and protected by a fiberglass cover.
500

Type No. white 750 10082

Order No. orange 750 10083

Input 7/8″ EIA flange

Frequency range 470 – 860 MHz

VSWR s < 1.12
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω

1000
Polarization Vertical
Max. power 1.5 kW
Weight 12 kg
Wind load (at 160 km/h) Frontal: 565 N
Vertical
Rearside: 815 N
polarization
Lateral: 250 N
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm 190

Material: Reflector screen and dipoles: Weather-resistant

aluminum.
Protective cover: Fiberglass.
Attachment plate: Hot-dip galvanized steel.

Attachment: Using M8 x 35 screws (supplied) to suitable

attachment construction.
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use 7/8″ EIA flange
in combinations in order to achieve various
radiation patterns.
52

1020

Radiation Patterns (at mid-band)

62°

28°

10 10
dB

dB

3 3
64
0 0

in H-plane in E-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

100
K 73 31 4. .
Directional Antenna
470 – 860 MHz

● Vertically polarized broadband directional antenna

made of aluminum and protected by a fiberglass cover.
● Especially suitable for ortogonal steel spines.

Type No. grey 750 10045

Order No. white 750 10046
orange 750 10047

Input 7-16 female

Frequency range 470 – 860 MHz
VSWR < 1.15
Gain (ref. λ/2 dipole) 10.5 dB at mid-band
Impedance 50 Ω
Polarization Vertical
Max. power 1 kW
Weight 10 kg
Wind load (at 160 km/h) Frontal: 410 N Vertical
Lateral: 250 N polarization
Max. wind velocity 225 km/h
Packing size 1140 x 330 x 240 mm
Height/width/depth 1045 x 323 x 193 mm

Material: Reflector screen and dipoles: Weather-resistant

aluminum.
Protective cover: Fiberglass.

470 – 862 MHz

Attachment plate: Hot-dip galvanized steel.

Antennas
Attachment: Using M 8 x 35 screws (supplied) to suitable 74
attachment construction.
54

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.
52

Combinations: The antenna is particularly suitable for

1045
1020

multi-panel arrangements.

Radiation Patterns (at mid-band)

70°
323
28°

10 10
dB

dB

3 3

0 0

Horizontal Pattern Vertical Pattern All dimensions in mm

101
K 72 32 4. .
Directional Antenna
470 – 860 MHz

● Horizontally polarized broadband directional antenna

made of aluminum and protected by a fiberglass cover.
500

Type No. white 750 10031 750 10016

Order No. orange 750 10032 750 10017

Input 7/8″ EIA flange 15/8″ EIA flange

Frequency range 470 – 860 MHz
VSWR s < 1.1
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω

1000
Polarization Horizontal
Max. power 1.5 kW 3 kW
Weight 10 kg 10.5 kg
Wind load (at 160 km/h) Frontal: 565 N
Horizontal
Rearside: 815 N
polarization
Lateral: 250 N
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm 190

Material: Reflector screen and dipoles: Weather-resistant

aluminum.
Protective cover: Fiberglass.
Attachment plate: Hot-dip galvanized steel.

Attachment: Using M 8 x 35 screws (supplied) to suitable

attachment construction.
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy

conditions as the fiberglass cover protects the
whole antenna and also the antenna is of a very
robust design.

Combinations: The antenna is particularly suitable for use 7/8″ EIA flange
in combinations in order to achieve various
radiation patterns.
1020

Radiation Patterns (at mid-band)

56°

26°

10 10

64
dB

dB

3 3
750 10031
0 0
750 10032
in E-plane in H-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

102
K 72 32 4. .
Directional Antenna
470 – 860 MHz
500
● Horizontally polarized broadband directional antenna
made of aluminum and protected by a fiberglass cover.

Type No. white 772 549 750 10012 773 000 773 333
Order No. orange 772 550 750 10013 772 999 773 332

Input (from below) 7-16 female 7/8″

EIA 13-30 female 15/8″ EIA
flange flange

1000
Frequency range 470 – 860 MHz
VSWR s < 1.1
Gain (ref. λ/2 dipole) 11 dB at mid-band
Impedance 50 Ω
Polarization Horizontal
Max. power 1 kW 1.5 kW 2 kW 3 kW
Weight 9.5 kg 10 kg
Wind load (at 160 km/h) Frontal: 565 N
Rearside: 815 N

190
Lateral: 250 N
Max. wind velocity 225 km/h
Packing size 1062 x 562 x 294 mm
Height/width/depth 1000 x 500 x 190 mm

Material: Reflector screen and dipoles: Weather-resistant aluminum.

Protective cover: Fiberglass.

470 – 862 MHz

Attachment plate: Hot-dip galvanized steel.

Antennas
Attachment: Using M 8 x 35 screws (supplied) to suitable attachment Horizontal
construction. polarization
Mounting dimensions upon request.

Grounding: Via mounting parts.

Ice protection: The dipoles remain fully functioning even in icy conditions
as the fiberglass cover protects the whole antenna and also
the antenna is of a very robust design.

Combinations: The antenna is particularly suitable for use in combinations

in order to achieve various radiation patterns.

Scope of supply: The 7-16 female connector is supplied with a weather

protection unit.

Weather
protection
1020

Radiation Patterns (at mid-band)

56°

26°

10 10
dB

64
dB

3 3
772 549
0 0
772 550
in E-plane in H-plane
Horizontal Pattern Vertical Pattern All dimensions in mm

103
K 72 31 5.
Directional Antenna
675 – 860 MHz
● Horizontally polarized broadband directional antenna made
of aluminum and protected by a fiberglass cover.

Type No. K 72 31 57 776 015

Order No. 602 204

Input 7-16 female 13-30 female

Frequency range 646 – 860 MHz 646 – 860 MHz
VSWR < 1.1
Gain (ref. λ/2 dipole) 10 dB at mid-band
Impedance 50 Ω
Polarization Horizontal A
Max. power 1 kW 2 kW
Weight 8 kg
Wind load (at 160 km/h) Frontal: 315 N
Horizontal
Rearside: 500 N
polarization
Lateral: 160 N
Max. wind velocity 225 km/h
Packing size 970 x 410 x 240 mm

Material: Reflector screen and dipoles: Weather-resistant

C
aluminum. Radome: Fiberglass, colour: White,
A: 880 mm
upon request orange. B: 315 mm
Fittings: Hot-dip galvanized steel. C: 150 mm

Attachment: E.g. by using clamps K 61 14 0… to tubular

(please order masts of 40 – 521 mm diameter.
separately) Further attachment parts and mounting
dimensions upon request.

Ice protection: Even under severe icy conditions the antenna is

still functional due to its heavy-duty construction
and the fiberglass covers for the feeding points.

Grounding: Via mounting parts.

Combinations: The antenna is particularly suitable for use

in combinations in order to achieve various
radiation patterns.

Scope of delivery: Directional antenna with one weather protection

unit each for straight connectors and elbow
connectors.

Radiation Patterns (at mid-band)

69°
28°

10 10
dB

dB

3 3

0 0

Horizontal Radiation Pattern Vertical Radiation Pattern

104
K 72 23 4.
Directional Antenna
470 – 860 MHz
● Logarithmic-periodic broadband directional antenna
in fiberglas radome.
● High side-lobe suppression.

Type No. 761 327 K 72 23 47 K 72 23 41

Order No. 601 584 601 695

Input 7-16 female 7-16 female N female

Frequency range 470 – 860 MHz For horizontal polarization
VSWR < 1.25
Gain (ref. to λ/2 dipole) 9 dB at mid-band A: 1153 mm
Impedance 50 Ω B: 353 mm
C: 180 mm
Side-lobe suppression > 23 dB at 470 – 500 MHz
> 25 dB at 500 – 860 MHz
Polarization Either horizontal or vertical
A
by repositioning two clamps
Max. power 100 W 30 W 30 W
B
Weight 9 kg
Wind load (at 160 km/h) For horizontal pol.: frontal/lateral: 63 / 102 N
For vertical pol.: frontal/lateral: 63 / 500 N
Max. wind velocity For horizontal pol.: 225 km/h
For vertical pol.: 180 km/h
Packing size 1172 x 372 x 224 mm For vertical polarization

Material: Radiator: Weather-resistant aluminum.

470 – 862 MHz

Radome: Fiberglass, colour: Grey.

Antennas
Mounting kit: Aluminum.
All screws and nuts: Stainless steel. D: 140 mm
D

Mounting: To tubular masts of 48 – 115 mm diameter using

D
supplied clamps.

Ice protection: Since radiating system is fully protected by the

radome and due to its very sturdy construction,
the antenna remains fully operational even under
heavy icy conditions.
For horizontal polarization
Grounding: Via mounting parts.

Combinations: Several antennas can be combined to increase

the gain and to produce radiation patterns with
very high side-lobe suppressions.

Radiation Patterns (at mid-band)

For vertical polarization

53° 65°

10 10
dB
dB

3 3

0 0

In E-Plane In H-Plane

105
K 72 20 4. .
Omnidirectional Antenna
470 – 860 MHz
● Broadband omnidirectional antenna.

Type No. / Order No. 767 006 770 881

Number of bays 1 2
Input 7-16 female 7/8″ EIA
Frequency range 470 – 860 MHz
VSWR < 1.1
Gain 5 dB 8 dB
at mid-band at mid-band
Vertical 3 dB beam width 22° 11°

H
Impedance 50 Ω
Polarization Horizontal
Max. power 1 kW 2 kW
(at 40 °C ambient temperature)
Weight 20 kg 40 kg
Wind load (at 160 km/h) 285 N 570 N
Max. wind velocity 225 km/h
Height H 1.15 m 2.3 m

Material: Omnidirectional antenna in protective fiberglass

radome with a diameter of 300 mm.
Flange: Aluminum.

Attachment: To tubular masts with a diameter of 100 – 160 mm

by using the attachment accessories 768 853
(see photo) or on a flange (see draft).

Grounding: Via mounting parts.

4 x M12
max. 190
150

Upper side Base flange

Radiation Patterns (at mid-band)

100 100
E rel E rel

50 50

10
dB

3 0 10 20 α° 0 10 20 α°

Horizontal Radiation Pattern Vertical Radiation Pattern Vertical Radiation Pattern

1 bay (767 006) 2 bays (770 881)

106
K 72 20 4. .
Omnidirectional Antenna
470 – 860 MHz

● Broadband omnidirectional antenna

Type No. / Order No. 771 304 775 861

Number of bays 4 4
Input 15/8″ EIA flange 15/8″ EIA flange
Input feed by Coupler Splitter
Frequency range 470 – 860 MHz
VSWR 1.1 in the whole frequency range
< 1.05 in the operating channel
(optimization by tuning)
Gain (ref. to λ/dipole) 11 dB at mid-band
Vertical 3 dB beamwidth 5.5°
Impedance 50 Ω
Polarization Horizontal
Max. power 4 kW (average)
(at 40 °C ambient temperature)
Weight 170 kg
Windload (at 160 km/h) 1.45 kN
Max. wind velocity 225 km/h
Height 5.1 m
Packing size 5400 x 500 x 600 mm

470 – 862 MHz

Antennas
Material: Omnidirectional antenna in protective fiberglass
radome with a diameter of 300 mm.

Mounting: On top of existing structure by means of an

adapter. Mounting dimensions upon request.

Grounding: Continuous earth connection between antenna

tip and base.

Special features: Antenna is equipped with a special power splitter

(only 775 861) including tuning section to allow optimization of
VSWR < 1.05 within operating channel.
diameter 18
280

Radiation Patterns (at mid-band)

4 bays
100 300
E rel

50
10
dB

3
0 10 20 α°
0

Horizontal Radiation Pattern Vertical Radiation Pattern

107
K 73 20 4. .
Omnidirectional Antenna
470 – 702 MHz
● Broadband omnidirectional antenna

Type No. / Order No. 750 10060

Input 7-16 female

Frequency range 470 – 702 MHz
VSWR < 1.3

~1400
(better VSWR values upon request)
Gain (ref. λ/2 dipole) 3.0 – 4.5 dB
Vertical 3 dB beam width 20° – 30°
Impedance 50 Ω
Polarization Vertical
Max. power 750 W (at 40 °C ambient temperature) ∅ 230
Weight 16 kg
Wind load (at 160 km/h) 225 N
Max. wind velocity 225 km/h
Height 1400 mm ∅ 245

Material: Omnidirectional antenna in protective fiberglass

radome with a diameter of 230 mm.
Flange: Hot-dip galvanized steel.

Attachment: Onto a fitting counterflange or to tubular masts by

using the steel adapter 753 10237 (weight 9 kg,
suitable for tube diameters 100 – 160 mm).

Grounding: Via mounting parts.

∅ 200
7-16 female
55

5xM12

Bottom view with

attachment accessories
Radiation Patterns (at mid-band)

10 10
dB

dB

3 3

0 0

Horizontal Radiation Pattern Vertical Radiation Pattern

108
K 73 20 4. .
Omnidirectional Antenna
470 – 702 MHz
● Broadband omnidirectional antenna

Type No. / Order No. 750 10062

Input 7-16 female

Frequency range 470 – 702 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 5.5 – 7 dB
Vertical 3 dB beam width 11° – 22°
Impedance 50 Ω
Polarization Vertical
Max. power 1 kW
(at 40 °C ambient temperature)
Weight 40 kg

1927
Wind load (at 160 km/h) 490 N
Max. wind velocity 225 km/h
Height 1927 mm

Material: Omnidirectional antenna in protective fiberglass

radome with a diameter of 332 mm. ∅ 332
Flange: Hot-dip galvanized steel.

Attachment: Onto a fitting counterflange or to tubular masts by

470 – 862 MHz

Antennas
using the steel adapter 753 10232 (weight 13.5 kg,
∅ 356
suitable for tube diameters 100 – 160 mm).

Lightning protection: Lightning rod

Grounding: Via mounting parts.

∅ 280

7-16 female 6xM12

Bottom view

Radiation Patterns (at mid-band)

15°

10 10
dB

dB

3 3

0 0

Horizontal Radiation Pattern Vertical Radiation Pattern

1 ° electrical downtilt

109
K 73 20 4. .
Omnidirectional Antenna
470 – 750 MHz
● Center fed collinear antenna

Vertical Polarized Omni Antenna for Ch 21 – Ch 55

Type No. / Order No. Frequency Channel Gain Half-power
range (ref. λ/2 dipole) beam width

750 10112 470 – 502 MHz Ch 21 – Ch 24 6.5 dB 13°

750 10113 502 – 534 MHz Ch 25 – Ch 28 7 dB 12°
750 10114 534 – 574 MHz Ch 29 – Ch 33 7.5 dB 11°
750 10115 574 – 614 MHz Ch 34 – Ch 38 7.5 dB 10°
750 10116 614 – 662 MHz Ch 39 – Ch 44 8 dB 9.5°
750 10117 654 – 702 MHz Ch 44 – Ch 49 8 dB 9°
750 10118 694 – 750 MHz Ch 49 – Ch 55 8.5 dB 8.5°

3113 mm
Input 7-16 female connector
VSWR 1.4
Impedance 50 Ω
Polarization Vertical
Max. power 400 W (at 50 °C ambient temperature)
Weight 8.0 kg
Radome diameter 51 mm
Wind load (at 150 km/h) 220 N
Max. wind velocity 180 km/h
Packing size 3379 x 206 x 1522 mm
Length 3113 mm

Material: Radiator: Copper and brass.

Radome: Fiberglass, colour: Grey
Antenna base: Aluminum.
Mounting kit, screws and nuts: Stainless steel.

Mounting: The antenna can be attached laterally at the tip of a tubular mast of
50 – 94 mm diameter (connecting cable runs outside the mast).

Grounding: Earthing cross-section of 22 mm2 copper between antenna tip and base.

um
maximtop
mast

*
230
150

10
dB

Vertical Pattern 104

Half-power beam width:
* see table above

110
K 73 33 4. .
Directional Indoor Antenna
470 – 750 MHz

Vertical Polarized Indoor Antenna for DVB-H

Type No. / Order No. 750 10120 750 10122 750 10124 750 10125

Frequency range 470 – 534 MHz 534 – 614 MHz 614 – 702 MHz 702 – 750 MHz
Ch 21 – Ch 28 Ch 29 – Ch 38 Ch 39 – Ch 49 Ch 50 – Ch 55
Input N female connector
VSWR < 2.0
Gain (ref. λ/2 dipole) Approx. 5 dB
Half-power beam width Horizontal: Approx. 90°
Impedance 50 Ω
Polarization Vertical
Max. power 50 W (at 50 °C ambient temperature)
Protection class IP 30
Weight 1390 g
Packing size 315 x 252 x 62 mm
Height/width/depth 302 x 243 x 50 mm

Material: Reflector: Brass.

Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting plates: Stainless steel.

470 – 862 MHz

Antennas
Mounting: Two holes of 6 mm diameter in the mounting 90°
plate. Screws are not supplied

Grounding: All metal parts inclusive the inner conductor are

DC grounded.
10
dB
3

Horizontal Pattern

Mounting:

Mount the attachment plate to the wall Align the antenna over the attachment plate. Pull the antenna down to the stop.
using two screws of 4 mm diameter
in the position as indicated.

111
K 73 20 4. .
Indoor Omnidirectional Antenna
470 – 750 MHz

Vertical Polarized Indoor Antenna for DVB-H

Type No. / Order No. 750 10130 750 10131 750 10132

Frequency range 470 – 574 MHz 526 – 670 MHz 598 – 750 MHz
Ch 21 – Ch 33 Ch 28 – Ch 45 Ch 37 – Ch 55
Input N female connector
VSWR < 2.0
Gain (ref. λ/2-dipole) Approx. 0 dB
Impedance 50 Ω
Polarization Vertical
Max. power 50 W (at 50 °C ambient temperature)
Protection class IP 30
Weight 450 g
Packing size 267 x 267 x 114 mm
Diameter 258 mm
Height 77 mm (without connector)

Material: Reflector: Aluminum.

Radome: High impact polystyrol, colour: White.
Additional painting is possible.

Mounting: Three holes in the base enable a mounting on

the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.

Grounding: All metal parts including the inner conductor

are DC grounded.

46 mm

N connector, female
3 holes dia. 5 mm

dia. 160 mm

5 mm

112
K 73 21 4. .
Bidirectional Antenna
470 – 702 MHz
● Particulary suitable for DVB-H

Type No. / Order No. 750 10128

Input N female
Frequency range 470 – 860 MHz
VSWR 470 – 750 MHz: < 1.7
750 – 860 MHz: < 2.2
Gain (ref. λ/2 dipole) 2 dB
Impedance 50 Ω

371 mm

400 mm
Polarization Vertical
Max. power (total) 250 W (at 50 °C ambient temperature)
Protection class IP 33
Weight 0.8 kg
Wind load Frontal: 25 N (at 150 km/h)
Lateral: 65 N (at 150 km/h)
Rearside: 35 N (at 150 km/h)
Max. wind velocity 200 km/h
Packing size 422 x 212 x 95 mm
Height/width/depth 310 / 55 / 190 mm

Material: Radiator: Tin plated brass.

Reflector: Weather-proof aluminum.

470 – 862 MHz

8.5 mm

Antennas
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Wall mounting: No additional mounting kit

needed.
For pipe mast mounting use clamps listed below
(order separately).

Ice protection: The radiating system is protected by the radome.

Due to its very sturdy construction, the antenna
remains operational even under icy conditions.

Grounding: All metal parts of the antenna as well as the

inner conductor are DC grounded.

Accessories (order separately) 220°

Weight Units per

Type No. Description Remarks
approx. antenna

734 360 2 clamps Mast: 34 – 60 mm diameter 60 g 1

10
734 361 2 clamps Mast: 60 – 80 mm diameter 70 g 1
734 362 2 clamps Mast: 80 – 100 mm diameter 80 g 1
dB

3
734 363 2 clamps Mast: 100 – 120 mm diameter 90 g 1
734 364 2 clamps Mast: 120 – 140 mm diameter 110 g 1 0

734 365 2 clamps Mast: 45 – 125 mm diameter 80 g 1 Typical Horizontal Pattern

113
114
Antenna Systems
1452 – 1492 MHz

1452 – 1492 MHz

Systems

115
Transmitting Antenna
with panels K 83 30 6. .
1452 – 1492 MHz

Type No. / Order No. 759 13851

Input connector 7-16 female

Frequency range 1452 – 1492 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 10.5 dB
Impedance 50 Ω
Input power 800 W (RMS)
Polarization Vertical
Half-power beam width Vertical: 9°
Height 3.000 mm (incl. lightning rod)
Weight 125 kg
Windload (at 160 km/h) 0.8 kN
Max. wind velocity 200 km/h

Material: Reflector screen and radiators: Copper.

Radomes: Fiberglass, colour: Grey.
Panel pipe: Hot-dip galvanized steel.
All screws and nuts: Stainless steel.

Mounting: Panel pipe mounted with suitable clamps or

additional flange on existing mast structures.
A version supplied with fixing flange is available
upon request.

Grounding: The metal parts of the antenna are DC grounded.

Also the inner conductors of the antenna panels
are DC grounded.

Packing infomation: Wooden crate: 2.700 x 800 x 900 mm

Total weight: 400 kg

10
dB

Horizontal Radiation Pattern

116
Transmitting Antenna
with panels K 83 30 6. .
1452 – 1492 MHz

Type No. / Order No. 759 13232

Input connector 1 5/8″ EIA-flange

Frequency range 1452 – 1492 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 13 dB
Impedance 50 Ω
Input power max. 3 kW (RMS)
Polarization Vertical
Half-power beam width Vertical: 4.5°
Downtilt on request
Height 4.900 mm (excl. lightning rod)
Weight 160 kg
Windload (at 160 km/h) 0.1 kN
Max. wind velocity 200 km/h

Material: Reflector screen and radiators: Copper.

Radomes: Fiberglass, colour: Grey.
Panel pipe: Hot-dip galvanized steel.
All screws and nuts: Stainless steel.

Mounting: Panel pipe mounted with suitable clamps or

additional flange on existing mast structures.
A version supplied with fixing flange is available
upon request.

1452 – 1492 MHz

Grounding: The metal parts of the antenna are DC grounded.

Systems
Also the inner conductors of the antenna panels
are DC grounded.

Packing infomation: 2 wooden crate: approx. 2.700 x 800 x 900 mm

Total weight: 180 kg, each

10
dB

Horizontal Radiation Pattern

117
Transmitting Antenna for large structures
with panels K 83 30 6. .
1452 – 1492 MHz

Type No. / Order No. 759 14152

–45°
Input connector 1 5/8″ EIA-flange
Frequency range 1452 – 1492 MHz
VSWR < 1.2
Gain (ref. λ/2 dipole) 9.5 dB +45°
r +45°
Impedance 50 Ω
Input power max. 2 kW (RMS)
Polarization Mixed polarized (+45° and –45°)
Beam tilt 3° or on request
Distance of panels 10.000 mm –45°
Height 1302 mm per unit
Weight approx. 180 kg
Windload (at 160 km/h) 1.1 kN
Max. wind velocity 200 km/h

Material: Reflector screen and radiators: Copper.

Radomes: Fiberglass, colour: Grey.
Panel pipe: Hot-dip galvanized steel.
All screws and nuts: Stainless steel.

Mounting: Panel pipe mounted with suitable clamps or

additional flange on existing mast structures.
A version supplied with fixing flange is available
upon request.
10

Grounding: The metal parts of the antenna are DC grounded.

dB

3
Also the inner conductors of the antenna panels
are DC grounded. 0

Horizontal Radiation Pattern

Models: Models 750 10094 (+45°) and 750 10194 (–45°)
L-Band Antenna Panel with 70° half-power
beamwidth, 3° electrical downtilt,
max. power 500 W, height 1302 mm

118
 Antennas for DAB in L Band
1452 – 1492 MHz

Model Types:
K 83 20 6. ., K 83 30 6. .

Type No. Description Frequency range Gain Polarization Page

770 732 Dipole Panel 65° 1452 – 1492 MHz 8.0 dB vertical 120
770 733 Dipole Panel 65° 1452 – 1492 MHz 10.5 dB vertical 120
770 793 Dipole Panel 65° 1452 – 1492 MHz 13.5 dB vertical 120
770 794 Dipole Panel 65° 1452 – 1492 MHz 15.0 dB vertical 120
770 795 Dipole Panel 65° 1452 – 1492 MHz 16.0 dB vertical 120
770 652 Dipole Panel 90° 1452 – 1492 MHz 12.5 dB vertical 121
770 947 Dipole Panel 90° 1452 – 1492 MHz 15.5 dB vertical 122
770 948 Dipole Panel 160° 1452 – 1492 MHz 14.0 dB vertical 123
770 653 Dipole Panel 160° 1452 – 1492 MHz 11.0 dB vertical 124
772 310 Dipole Panel 180° 1452 – 1492 MHz 13.5 dB vertical 125
771 917 Dipole Panel 180° 1452 – 1492 MHz 10.5 dB vertical 126
750 10190 Dipole Panel 70° 1452 – 1492 MHz 14.0 dB +45° 127
750 10191 Dipole Panel 70° 1452 – 1492 MHz 14.0 dB –45° 127
750 10094 Dipole Panel 70° 1452 – 1492 MHz 14.0 dB +45° 128
750 10194 Dipole Panel 70° 1452 – 1492 MHz 14.0 dB –45° 128
770 721 Omnidirectional Antenna 1452 – 1492 MHz 7.0 dB vertical 129
770 722 Omnidirectional Antenna 1452 – 1492 MHz 10.0 dB vertical 129
771 870 Omnidirectional Antenna 1452 – 1492 MHz 11.5 dB vertical 129
771 038 Omnidirectional Antenna 1452 – 1492 MHz 10.0 dB vertical 130

1452 – 1492 MHz

Antennas

119
K 83 30 6. .
Panel for DAB in L Band
65° Half-power Beam Width

Type No. / Order No. 770 732 770 733 770 793 770 794 770 795
155
Connector position Bottom or top
Input 7-16 female connector
Frequency range 1452 – 1492 MHz
VSWR < 1.3 < 1.25 < 1.25 < 1.25 < 1.25
Gain (ref. λ/2 dipole) 8 dB 10.5 dB 13.5 dB 15 dB 16 dB
Impedance 50 Ω
Polarization Vertical
Half-power beam width
Horizontal plane 65°
Vertical plane 55° 27° 13° 9° 6.5°
Max. power 200 W (at 50 °C ambient temperature)
Width 155 mm

Height see table

Depth 49 mm
Height 210 mm 405 mm 795 mm 1185 mm 1575 mm
Weight 1.5 kg 2 kg 3 kg 4.5 kg 5.5 kg
Wind load (at 160 km/h)
Frontal: 40 N 80 N 160 N 240 N 320 N
Lateral: 15 N 30 N 60 N 100 N 140 N
Rearside: 45 N 90 N 180 N 280 N 380 N
Max. wind velocity 200 km/h

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Walls: Using two mounting plates already

attached to the antenna. ∅ 8.5
Masts: Using two clamps suitable for the mast 34
diameter (order separately). 64

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction,
the antenna remains operational even under
65°
icy conditions. 120°

Grounding: The metal parts of the antenna, including

the mounting kit, are DC grounded.
10
The inner conductor is also DC grounded.
dB

0
Accessories for Antennas Horizontal Pattern
770 732, 770 733, 770 793, 770 794 (order separately)
Type No. Units per
Description Remarks
Order No. antenna

734 360 2 clamps 34 – 60 mm diameter 1

734
734
361
362
2
2
clamps
clamps
60
80
–
–
80
100
mm
mm
diameter
diameter
1
1
*
734 363 2 clamps 100 – 120 mm diameter 1 10

734 364 2 clamps 120 – 140 mm diameter 1

dB

734 365 2 clamps 45 – 125 mm diameter 1 3

0
Accessories for Antenna 770 795 (order separately)
Vertical
738 546 1 clamp 50 – 115 mm diameter 2 Half-power beam width:
* see table above
850 10002 1 clamp 110 – 220 mm diameter 2
850 10003 1 clamp 210 – 380 mm diameter 2

120
K 83 30 6. .
Panel for DAB in L Band
90° Half-power Beam Width

155

Type No. / Order No. 770 652

Connector position Bottom or top

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
Gain (ref. λ/2 dipole) 12.5 dB
VSWR < 1.25
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 90°/ Vertical: 12°

1036
1066
988
Max. power 500 W (at 50 °C ambient temperature)
Weight 3.7 kg
Windload (at 160 km/h) Frontal: 200 N
Lateral: 80 N
Rearside: 230 N
Max. wind velocity 200 km/h
Packing size 1087 x 172 x 259 mm
Height/width/depth 988 / 155 / 49 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Walls: Using two mounting plates already ∅ 8.5

attached to the antenna. 34
Masts: Using two clamps suitable for the mast 64
diameter (order separately).

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction, 90°
the antenna remains operational even under

1452 – 1492 MHz

Antennas
icy conditions.

Grounding: The metal parts of the antenna, including

the mounting kit, are DC grounded.
The inner conductor is also DC grounded.
dB

Horizontal Pattern

Accessories (order separately)

12°
Type No. Units per
Description Remarks
Order No. antenna
10
734 360 2 clamps 34 – 60 mm diameter 1
734 361 2 clamps 60 – 80 mm diameter 1
dB

3
734 362 2 clamps 80 – 100 mm diameter 1
734 363 2 clamps 100 – 120 mm diameter 1 0

734 364 2 clamps 120 – 140 mm diameter 1 Vertical Pattern

734 365 2 clamps 45 – 125 mm diameter 1

121
K 83 30 6. .
Panel for DAB in L Band
90° Half-power Beam Width

155

Type No. / Order No. 770 947

Connector position Bottom

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
VSWR < 1.25
Gain (ref. λ/2 dipole) 15.5 dB
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 90°/ Vertical: 5.5°

1942
1996
2026
1° electr. downtilt
Max. power 500 W (at 50 °C ambient temperature)
Weight 6.9 kg
Windload (at 160 km/h) Frontal: 400 N
Lateral: 180 N
Rearside: 480 N
Max. wind velocity 200 km/h
Packing size 2044 x 172 x 72 mm
Height/width/depth 1942 / 155 / 49 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel. ∅ 8.5
34
Mounting: Walls: Using two mounting plates already
64
attached to the antenna.
Masts: Using two clamps suitable for the mast
diameter (order separately).

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction, 90°
the antenna remains operational even under
icy conditions.

Grounding: The metal parts of the antenna, including

the mounting kit, are DC grounded.
The inner conductor is also DC grounded.
dB

Horizontal Pattern
Accessories (order separately)
Type No. Units per
Description Remarks
Order No. antenna

738 546 1 clamp 50 – 115 mm diameter 2

5.5°
850 10002 1 clamp 110 – 220 mm diameter 2
850 10003 1 clamp 210 – 380 mm diameter 2
10
dB

Vertical Pattern
1° electrical downtilt

122
K 83 30 6. .
Panel for DAB in L Band
160° Half-power Beam Width

155

Type No. / Order No. 770 948

Connector position Bottom

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
Gain (ref. λ/2 dipole) 14 dB
VSWR < 1.25
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 160° / Vertical: 5.5°

1942
1996
2026
1° electrical downtilt
Max. power 500 W (at 50 °C ambient temperature)
Weight 7.3 kg
Windload (at 160 km/h) Frontal: 440 N
Lateral: 230 N
Rearside: 480 N
Max. wind velocity 200 km/h
Packing size 2047 x 172 x 259 mm
Height/width/depth 1942 / 155 / max. 168 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel. ∅ 8.5
34
Mounting: Walls: Using two mounting plates already
64
attached to the antenna.
Masts: Using two clamps suitable for the mast
diameter (order separately).

Ice protection: Since the radiating system is protected by the

160°
radome and due to its very sturdy construction,

1452 – 1492 MHz

Antennas
the antenna remains operational even under
icy conditions.

10
Grounding: The metal parts of the antenna, including 220°
the mounting kit, are DC grounded.
dB

3
The inner conductor is also DC grounded.
0

Horizontal Pattern

Accessories (order separately)

Type No. Units per
Description Remarks
Order No. antenna
5.5°
738 546 1 clamp 50 – 115 mm diameter 2
850 10002 1 clamp 110 – 220 mm diameter 2
10
850 10003 1 clamp 210 – 380 mm diameter 2
dB

Vertical Pattern
1° electrical downtilt

123
K 83 30 6. .
Panel for DAB in L Band
160° Half-power Beam Width

155

Type No. 770 653

Connector position Bottom or top

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
Gain (ref. λ/2 dipole) 11 dB
VSWR < 1.25
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 160°/ Vertical: 12°

1036
1066
988
Max. power 500 W (at 50 °C ambient temperature)
Weight 4 kg
Windload (at 160 km/h) Frontal: 220 N
Lateral: 130 N
Rearside: 280 N
Max. wind velocity 200 km/h
Packing size 1087 x 172 x 259 mm
Height/width/depth 988 / 155 / max. 168 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Walls: Using two mounting plates already ∅ 8.5

attached to the antenna. 34
Masts: Using two clamps suitable for the mast 64
diameter (order separately).

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction,
160°
the antenna remains operational even under
icy conditions.

Grounding: The metal parts of the antenna, including

10
the mounting kit, are DC grounded. 220°
The inner conductor is also DC grounded.
dB

Horizontal Pattern

Accessories (order separately)

Type No. Units per
Description Remarks
Order No. antenna
12°
734 360 2 clamps 34 – 60 mm diameter 1
734 361 2 clamps 60 – 80 mm diameter 1
10
734 362 2 clamps 80 – 100 mm diameter 1
734 363 2 clamps 100 – 120 mm diameter 1
dB

3
734 364 2 clamps 120 – 140 mm diameter 1
734 365 2 clamps 45 – 125 mm diameter 1 0

Vertical Pattern

124
K 83 30 6. .
Panel for DAB in L Band
180° Half-power Beam Width

155

Type No. / Order No. 772 310

Connector position Bottom

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
Gain (ref. λ/2 dipole) 13.5 dB
VSWR < 1.25
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 180° / Vertical: 5.5°

1942
1996
2026
1° electrical downtilt
Max. power 500 W (at 50 °C ambient temperature)
Weight 7.3 kg
Windload (at 160 km/h) Frontal: 440 N
Lateral: 230 N
Rearside: 480 N
Max. wind velocity 200 km/h
Packing size 2047 x 172 x 259 mm
Height/width/depth 1942 / 155 / max. 168 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel. ∅ 8.5
34
Mounting: Walls: Using two mounting plates already
64
attached to the antenna.
Masts: Using two clamps suitable for the mast
diameter (order separately).

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction,

1452 – 1492 MHz

180°

Antennas
the antenna remains operational even under
icy conditions.

10
Grounding: The metal parts of the antenna, including
the mounting kit, are DC grounded.
dB

The inner conductor is also DC grounded.

0

Horizontal Pattern

Accessories (order separately)

Type No. Units per
Description Remarks
Order No. antenna
5.5°
738 546 1 clamp 50 – 115 mm diameter 2
850 10002 1 clamp 110 – 220 mm diameter 2
10
850 10003 1 clamp 210 – 380 mm diameter 2
dB

Vertical Pattern
1° electrical downtilt

125
K 83 30 6. .
Panel for DAB in L Band
180° Half-power Beam Width

155

Type No. / Order No. 771 917

Connector position Bottom or top

Input 7-16 female connector
Frequency range 1452 – 1492 MHz
Gain (ref. λ/2 dipole) 10.5 dB
VSWR < 1.25
Impedance 50 Ω
Polarization Vertical
Half-power beam width Horizontal: 180°/ Vertical: 12°

1036
1066
988
Max. power 500 W (at 50 °C ambient temperature)
Weight 4 kg
Windload (at 160 km/h) Frontal: 220 N
Lateral: 130 N
Rearside: 280 N
Max. wind velocity 200 km/h
Packing size 1087 x 172 x 259 mm
Height/width/depth 988 / 155 / max. 168 mm

Material: Reflector screen and radiator: Copper.

Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting: Walls: Using two mounting plates already ∅ 8.5

attached to the antenna. 34
Masts: Using two clamps suitable for the mast 64
diameter (order separately).

Ice protection: Since the radiating system is protected by the

radome and due to its very sturdy construction,
the antenna remains operational even under
icy conditions.
180°

Grounding: The metal parts of the antenna, including

the mounting kit, are DC grounded.
10
The inner conductor is also DC grounded.
dB

Horizontal Pattern
Accessories (order separately)
Type No. Units per
Description Remarks
Order No. antenna

734 360 2 clamps 34 – 60 mm diameter 1

12°
734 361 2 clamps 60 – 80 mm diameter 1
734 362 2 clamps 80 – 100 mm diameter 1
734 363 2 clamps 100 – 120 mm diameter 1 10

734 364 2 clamps 120 – 140 mm diameter 1

dB

3
734 365 2 clamps 45 – 125 mm diameter 1
0

Vertical Pattern

126
K 83 31 6.
Panel for DAB/DMB in L Band
70° Half-power Beam Width
750 10190
● +45° or –45° Polarization

Type No. / Order No. 750 10190 750 10191

Connector position Bottom

Input 7-16 female
Frequency range 1452 – 1492 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 14 dB
Impedance 50 Ω
Polarization +45° –45°

1302
1356
1386
Half-power beam width Horizontal: 70°/ Vertical: 8°
Max. power 500 W (at 50 °C ambient temperature)
Weight 6.5 kg
Wind load 310 N (bei 150 km/h)
Max. wind velocity 200 km/h
Packing size 1404 x 172 x 92 mm
Hight/width/depth 1302 / 155 / 69 mm

Material: Reflector screen: Tin-plated copper,

Radiator: Tin-plated zinc.
Radome: Fiberglas, colour: Grey.
∅ 8.5
All screws and nuts: Stainless steel.
35
Mounting: Walls: Using two mounting plates already 64
attached to the antenna.
Masts: Using two clamps suitable for the mast

69
diameter (order separately). –45° +45°

155
Ice protection: Since the radiating system is protected by the
radome and due to its very sturdy construction, Bottom view
the antenna remains operational even under icy
conditions.

Combinations: In combination with the other polarized antenna,

1452 – 1492 MHz

both antennas are particularly suitable as a 70°

Antennas
component in large distance multipanel
configurations. No deep minima will show up in
the overlapping zone between different dual
polarized antennas. 10
dB

Grounding: The metal parts of the antenna, including 3

the mounting kit, are DC grounded.

0
The inner conductor is also DC grounded.
Horizontal Pattern

Accessories (order separately)

8°
Units per
Type No. Description Remarks
antenna

734 360 2 clamps 34 – 60 mm diameter 1

dB

734 361 2 clamps 60 – 80 mm diameter 1 3

734 362 2 clamps 80 – 100 mm diameter 1

0
734 363 2 clamps 100 – 120 mm diameter 1
Vertical Pattern
734 364 2 clamps 120 – 140 mm diameter 1
734 365 2 clamps 45 – 125 mm diameter 1

127
K 83 31 6.
Panel for DAB/DMB in L Band
70° Half-power Beam Width
750 10094
● +45° or –45° Polarization
● 3° electrical downtilt

Type No. / Order No. 750 10094 750 10194

Connector position Bottom

Input 7-16 female
Frequency range 1452 – 1492 MHz
VSWR < 1.3
Gain (ref. λ/2 dipole) 14 dB
Impedance 50 Ω
Polarization +45° –45°

1302
1356
1386
Half-power beam width Horizontal: 70°/ Vertical: 8°
3° electrical downtilt
Max. power 500 W (at 50 °C ambient temperature)
Weight 6.5 kg
Wind load 310 N (bei 150 km/h)
Max. wind velocity 200 km/h
Packing size 1404 x 172 x 92 mm
Hight/width/depth 1302 / 155 / 69 mm

Material: Reflector screen: Tin-plated copper,

Radiator: Tin-plated zinc.
∅ 8.5
Radome: Fiberglas, colour: Grey.
All screws and nuts: Stainless steel. 35
64
Mounting: Walls: Using two mounting plates already
attached to the antenna.

69
Masts: Using two clamps suitable for the mast –45° +45°

diameter (order separately).

155

Ice protection: Since the radiating system is protected by the Bottom view
radome and due to its very sturdy construction,
the antenna remains operational even under icy
conditions.

Combinations: In combination with the other polarized antenna, 70°

both antennas are particularly suitable as a
component in large distance multipanel
configurations. No deep minima will show up in
the overlapping zone between different dual 10
polarized antennas.
dB

Grounding: The metal parts of the antenna, including

0
the mounting kit, are DC grounded.
Horizontal Pattern
The inner conductor is also DC grounded.

Accessories (order separately)

8°
Units per
Type No. Description Remarks
antenna

734 360 2 clamps 34 – 60 mm diameter 1

dB

734 361 2 clamps 60 – 80 mm diameter 1 3

734 362 2 clamps 80 – 100 mm diameter 1

0
734 363 2 clamps 100 – 120 mm diameter 1
Vertical Pattern
734 364 2 clamps 120 – 140 mm diameter 1 3° electrical downtilt
734 365 2 clamps 45 – 125 mm diameter 1

128
K 83 20 6. .
Omnidirectional Antenna for DAB in L Band
1452 – 1492 MHz
● Center fed collinear antennas with 7 dB, 10 dB and 11.5 dB gain.

Omni 1470 360° 7dB/10dB/11.5dB

Type No. / Order No. 770 721 770 722 771 870

Input 7-16 female connector

Frequency range 1452 – 1492 MHz
VSWR < 1.25
Gain (ref. λ/2 dipole) 7 dB 10 dB 11.5 dB
Impedance 50 Ω
Polarization Vertical
Vertical half-power 13° 6.5° 4°

973 mm
beam width
Max. power 200 W (at 50 °C ambient temperature)
Weight 4.5 kg 6.0 kg 8.0 kg
Radome diameter 51 mm
Wind load (at 160 km/h) 114 N 171 N 239 N
Max. wind velocity 200 km/h
Packing size 188 x 102 x 1246 mm 188 x 102 x 2216 mm 148 x 112 x 3316 mm
Length 973 mm 1944 mm 2994 mm

Material: Radiator: Copper and brass.

Radome: Fiberglass, colour: Grey
Antenna base: Aluminum.
Mounting kit, screws and nuts: Stainless steel.

Mounting: The antenna can be attached laterally at

the tip of a tubular mast of 50 – 94 mm diameter
(connecting cable runs outside the mast).

Grounding: Earthing cross-section of 22 mm2 copper 770 721

between antenna tip and base.

1452 – 1492 MHz

Antennas

* um
maximtop
mast

10
230
dB

3
150

Vertical Pattern at mid-band.

Half-power beam width:
* see table above.
104
1° electrical downtilt

129
K 83 20 6. .
Omnidirectional Antenna for DAB in L Band
1452 – 1492 MHz
● Center fed collinear antenna with 10 dB gain and 3° downtilt.

Type No. / Order No. 771 038

Input 7-16 female connector

Frequency range 1452 – 1492 MHz
VSWR < 1.25
Gain (bez. λ/2 dipole) 10 dB
Impedance 50 Ω
Polarization Vertical
Vertical half-power 6.5°
beam width 3° electr. downtilt

1944 mm
Max. power 200 W (at 50 °C ambient temperature)
Weight 6.0 kg
Radome diameter 51 mm
Wind load (at 160 km/h) 171 N
Max. wind velocity 200 km/h
Packing size 188 x 102 x 2216 mm
Length 1944 mm

Material: Radiator: Copper and brass.

Radome: Fiberglass, colour: Grey
Antenna base: Aluminum.
Mounting kit, screws and nuts: Stainless steel.

Mounting: The antenna can be attached laterally at

the tip of a tubular mast of 50 – 94 mm diameter
(connecting cable runs outside the mast).

Grounding: Earthing cross-section of 22 mm2 copper

between antenna tip and base.

6,5° um
maximtop
mast

10
230
dB

3
150

Vertical Pattern at mid-band.

Half-power beam width 6.5°
3° electrical downtilt
104

130
MMDS (Wireless Cable)
2500 – 2700 MHz

Wireless Cable (also known as MMDS) systems are used

to distribute up to 31 channels of television programming
throughout a city or urban area.

KATHREIN offers a selection of 40 models of professional

transmitting antennas for Wireless Cable services, with a
choice of horizontal or vertical polarization, five different
horizontal radiation patterns and gain options to meet your
specific requirements.

All antennas are composed of similar dipole modules

housed in a robust GRP radome for weather protection.

The use of parallel-fed elements assures constant vertical

patterns across the full band and allows the use of beamtilt
and null fill to optimize coverage.

This new product line offers a number of advantages,

including:

● VSWR is 1.2:1 (or better) across full 200 MHz bandwidth.

● 1.2 kW input power rating is standard for all models.

● Full selection of patterns & gain to optimize coverage.

● Parallel feed system provides maximum stability.

● Electrical beamtilt and null fill for coverage enhancement.

● Designed for severe environments. No pressurization is

2500 – 2700 MHz
required. Systems

● Superb performance and long-term reliability.

131
MMDS (Wireless Cable)
2500 – 2700 MHz

HORIZONTAL Omnidirectional Bidirectional

PATTERNS Pattern Pattern

MECHANICAL
PROPERTIES

10 10

VERTICAL

dB
dB
3 3

PATTERNS 0 0

4 MODULES 1.0 Gain: 12.4 dBi Gain: 16 dBi

RELATIVE FIELD

Weight: 27 kg
0.5
MMH-4/O (765 537) MMH-4/H (767 230)
Height: 1704 mm

Windload: 225 N
0° 5° 10° 15° 20°
MMV-4/O (767 194) MMV-4/H (767 234)

6 MODULES 1.0 Gain: 14.1 dBi Gain: 17.7 dBi

RELATIVE FIELD

Weight: 35 kg
0.5
MMH-6/O (766 393) MMH-6/H (767 231)
Height: 2212 mm

Windload: 330 N
0° 5° 10° 15° 20°
MMV-6/O (767 195) MMV-6/H (767 235)

8 MODULES 1.0 Gain: 15.2 dBi Gain: 18.8 dBi

RELATIVE FIELD

Weight: 43 kg
0.5
MMH-8/O (766 394) MMH-8/H (767 232)
Height: 2880 mm

Windload: 430 N
0° 5° 10° 15° 20°
MMV-8/O (767 196) MMV-8/H (767 236)

Windload at 160 km/h

132
MMDS (Wireless Cable)
2500 – 2700 MHz

70° Pattern 150° Pattern 240° Pattern

10 10 10
dB

dB

dB
3 3 3

0 0 0

Gain: 18.5 dBi Gain: 15.5 dBi Gain: 14.1 dBi

MMH-4/C (766 404) MMH-4/B (766 400) MMH-4/A (766 396)

MMV-4/C (767 206) MMV-4/B (767 202) MMV-4/A (767 198)

Gain: 20.2 dBi Gain: 17.2 dBi Gain: 15.8 dBi

MMH-6/C (766 405) MMH-6/B (766 401) MMH-6/A (766 397)

Horizontal
MMV-6/C (767 207) MMV-6/B (767 203) MMV-6/A (767 199) Polarization

Gain: 21.3 dBi Gain: 18.3 dBi Gain: 16.9 dBi

2500 – 2700 MHz

Systems
MMH-8/C (766 406) MMH-8/B (766 402) MMH-8/A (766 398) Vertical
Polarization
MMV-8/C (767 208) MMV-8/B (767 204) MMV-8/A (767 200)

133
MMDS (Wireless Cable)
2500 – 2700 MHz

Type No. / Order No. See Type No. on page 132 and 133

Connector 7/8″ EIA flange

Frequency range 2500 – 2700 MHz
VSWR 1.2 : 1 maximum across
the full 200 MHz bandwidth ø 186
Impedance 50 Ω
Polarization Choise of horizontal or vertical polarized models.
Vertical radiation patterns 1° electrical downtilt and 15% null fill
are standard. Other values available as options.
Max. power 1.2 kW (at 50 °C ambient temperature)
Max. wind velocity 225 km/h

Material: Radome: Fiberglass, brown.

Antenna base: Aluminum.

Mounting: Flange mount to top of support structure.

Directional models may be side-mounted Height
using a bracket.

Attention:
The aluminum flange may only be mounted
to a flat base-plate (max. uneveness 0.5 mm)
with a drilled hole of 100 mm diameter in the
center for the 7/8″ EIA flange connector.

Grounding: Via mounting parts.

Label shows
center of main beam

180
7/8″ EIA flange

35

∅ 17
∅ 18
280
320

All dimensions in mm

Mounting bracket
134
MMDS (Wireless Cable)
2500 – 2700 MHz
776 012

Type No. / Order No. 776 012

Connector 2 x 7/8″ EIA flange

Frequency range 2500 – 2700 MHz
VSWR 1.2 : 1 maximum across
the full 200 MHz bandwidth ø 186
Impedance 50 Ω
Polarization vertically polarized
Vertical radiation patterns 3° electrical downtilt
25% null fill on the first lobe
and 15% on the second lobe
Max. power 1.2 kW (at 50 °C ambient temperature)
Max. wind velocity 225 km/h

Material: Radome: Fiberglass, brown.

Antenna base: Aluminum.

Mounting: Flange mount to top of support structure.

Directional models may be side-mounted 2880
using a bracket.

Attention:
The aluminum flange may only be mounted
to a flat base-plate (max. unevenness 0.5 mm)
with a drilled hole of 180 mm diameter in the
center for the two 7/8″ EIA flange connectors.

Grounding: Via mounting parts.

Label shows
center of main beam

2500 – 2700 MHz

Systems
90

180

2 x 7/8 EIA-flange

∅ 18
∅ 17
280
320

All dimensions in mm

Mounting bracket
135
136
 Relay Receiving Antennas
and Special Antenna Systems

Systems
Special

137
Relay Receiving Antennas for
TV and FM Broadcasting

Receiving antenna systems with high side-lobe

suppression and notches for the suppression
of interference can significantly improve the
signal quality of the relay receiving systems.

Due to ever-increasing transmitter density, relay

receiving systems can suffer difficulties due to
co-channel or adjacent channel interference. In
mountainous regions additional interference may be
caused by reflected signals that arrive delayed.

In order to suppress such interference, several

individual antennas can be combined. Optimization of
both the mechanical array and the electrical feeder
system results in notches in the direction of the
disturbance. Array patterns with notches in two different
directions can also be produced to suppress inter-
ference coming from a variety of sources.

To solve interference problems Kathrein offers

receiving antennas with high side-lobe suppression
for all frequency ranges.

16°

Kathrein’s log.-per. antennas have been specially

10
developed for such purposes. For example over the whole
TV Band III range they achieve a side-lobe suppression
dB

3
value of more than 25 dB in both the horizontal and the
0 vertical patterns. A further advantage of our log.-per.
Horizontal radiation pattern antennas is that their excellent radiation characteristics
Half-power beam width: 16° are hardly affected at all by very heavy ice formation.
Side-lobe suppression: > 30 dB
The following examples show measured radiation
If high quality individual antennas are used, array patterns of antenna arrays for all VHF and TV trans-
patterns with particularly high side-lobe suppression can mitting ranges (the side-lobes were enlarged by a
be produced. factor of 10 to ease identification).

Examples for Horizontal Radiation Patterns

47 … 88 MHz 87.5 – 108 MHz 174 – 230 MHz 470 – 860 MHz

10 dB expanded 10 dB expanded 10 dB expanded

10 dB expanded

10 10 10 10
dB

dB

dB

dB

3 3 3 3

0 0 0 0
3 units K 52 16 8.. 2 units K 52 22 1.. 3 units K 52 22 5.. 4 units K 72 23 4..

138
Special Antenna Systems

Kathrein’s sales range includes antennas and

accessories for

– all frequency ranges from 47 MHz

to 2700 MHz
– transmitter power ratings from 100 W
to 200 kW and
– various mast types (round, triangular, square
or reinforced fibre-glass material).

Furthermore, Kathrein will design and put

together special constructions to solve all
problems related to a specific site and to fulfil
customers’ special requests.

Typical examples:

– Antennas and power splitters with an

extended frequency range.
– Antennas suitable for withstanding extreme
weather conditions both on the coast and on
the top of high mountains (see Säntis photo,
Switzerland).
– Antennas with a heated surface to eliminate
damage to people through falling ice.
– Multi-pattern systems for transmitting several
channels with different horizontal patterns
via one signal antenna system to make
optimum use of the available mast height
(see Marlow photo).

Säntis transmitter in Switzerland

VHF and TV antenna systems completely enclosed
in a heated GRP radome.

Systems
Special

Combiners and layout for Marlow transmitter in Germany.

Multi-pattern antenna system for 7 FM channels.

139
140
Power Splitters

Splitters
Power

141
High Power Splitters
47 … 88 MHz, 87.5 – 108 MHz,
174 – 230 MHz, 470 – 862 MHz
● All power splitters are matched in the whole frequency range
with VSWR < 1.05.
● The additional tuning unit can be used to optimize the input impedance
of the antenna system on site.
● Special versions with unequal power splitting, alternative connectors
or up to 16 outputs are available on request.

Frequency 47 ... 88 87.5 – 108 174 – 230 470 – 862

range MHz MHz MHz MHz

Length approx. 2400 mm 1700 mm 850 mm 700 mm

with tuning unit approx. 2600 mm – 1500 mm 1000 mm
Input power 1 – 200 kW 1 – 200 kW 1 – 150 kW 1 – 70 kW
Connectors 7-16, 13-30, 7/8″, 1 5/8″, 3 1/8″, 4 1/2″, 6 1/8″ EIA flange
(or other connectors upon request)
Impedance 50 Ω
VSWR < 1.05 in each frequency range
Insertion loss < 0.05 dB

Material: Outer conductor: Brass with protective grey paint.

Inner conductor: Brass or aluminum.

Mounting: On flat surfaces using the standard mounting equipment

consisting of 2 bracket arms (supplied) or steel frame (order
separately). Example:
Tunable 16-way splitter with
Pressurization: The pressurization-tight transformer casing has an opening to different power splitting
balance out excess pressure. and with a measuring link.
For pressurized operation (typically at 300 mbar) this opening
must be closed with the supplied sealing screw.
IP 65 (closed ventiation tube for pressurized operation)
IP 53 (opened ventilation tube for non-presserized operation)

Weather protection: The RF connectors can be additionally protected with the sealing
tape (please order separately).

11 mm ∅

11 mm ∅

Example:
4-way splitter with standard-
attachment.

142
Medium Power Splitters
47 … 88 MHz, 87.5 – 108 MHz,
174 – 230 MHz, 470 – 862 MHz
● All power splitters are matched in the whole frequency range
with VSWR < 1.05.
● The additional tuning unit can be used to optimize the input impedance
of the antenna system on site.
● Special versions with unequal power splitting, alternative connectors
or up to 12 outputs are available on request.
● Power splitters for 66 – 72 MHz, 76 – 82 MHz, 82 – 88 MHz

L
are available on request. 130 mm

Frequency 47 ... 88 87.5 – 108 174 – 230 470 – 862

range MHz MHz MHz MHz

Length approx. 2400 mm 1650 mm 845 mm 560 mm

with tuning unit approx. 2600 mm – 1500 mm 860 mm
Input power 3 kW 2.5 kW 2 kW 1 kW
Connectors 7-16 female (other connectors upon request)
Impedance 50 Ω
VSWR < 1.05
Insertion loss < 0.05 dB

Material: Outer conductor: Brass with protective grey paint.

Inner conductor: Brass or aluminum.

Mounting: On flat surfaces using the standard mounting equipment supplied

(Bracket arm, 130 mm). To tubes of 30 – 340 mm diameter by
759 044
means of 2 tension band clamps Type No. 759 044 (please order
separately).

Pressurization: The pressurization-tight transformer casing has an opening to

balance out excess pressure.
For pressurized operation (typically at 300 mbar) this opening
must be closed with the supplied sealing screw.
IP 65 (closed ventiation tube for pressurized operation)
IP 53 (opened ventilation tube for non-presserized operation)

Weather protection: The RF connectors can be additionally protected with the sealing
tape (please order separately).

Type No. ( Order No.) of available power splitters – without tuning unit – with tuning unit

Number 47 – 54 54 – 61 60 – 68 87.5 – 108 174 – 230 470 – 862 174 – 230 470 – 862
of outputs MHz MHz MHz MHz MHz MHz MHz MHz
Splitters
Power

2 765 814 765 814 765 814 770 144 770 510 764 485 770 516 764 493
3 765 815 765 820 765 825 770 145 770 511 764 486 770 517 764 494
4 765 816 765 821 765 826 770 146 770 512 764 487 770 518 764 495
5 765 817 765 822 765 827 770 147 770 513 764 488 770 519 764 496
6 765 818 765 823 765 828 770 148 770 514 764 489 770 520 764 497
8 765 819 765 824 765 829 770 149 770 515 764 491 770 521 764 499

143
Low Power Splitters
174 – 230 MHz, 470 – 862 MHz and
1452 – 1492 MHz

174 – 230 MHz

Type No. / Order No. 768 343 768 334 768 344 768 335 768 345 768 336

Connector (female) N 7-16 N 7-16 N 7-16

Max. power 1 kW 2 kW 1 kW 2 kW 1 kW 2 kW
(at 50 °C ambient temp.)
Number of outputs 2 3 4
Frequency range 174 – 230 MHz
Impedance 50 Ω
VSWR < 1.07
Insertion loss < 0.05 dB
Max. size 800 / 82 / 82 mm

470 – 862 MHz

Type No. / Order No. 768 340 768 331 768 341 768 332 768 342 768 333

Connector (female) N 7-16 N 7-16 N 7-16

Max. power 500 W 1 kW 500 W 1 kW 500 W 1 kW
(at 50 °C ambient temp.)
Number of outputs 2 3 4
Frequency range 470 – 862 MHz
Impedance 50 Ω
VSWR < 1.07
Insertion loss < 0.05 dB
Max. size 520 / 82 / 82 mm

1452 – 1492 MHz

Type No. / Order No. 751 10281 751 10282 751 10283 768 332

Number of outputs 2 3 4
Connector (female) 7-16
Max. power 700 W
(at 50 °C ambient temp.)
Frequency range 1452 – 1492 MHz
Impedance 50 Ω
VSWR < 1.1
Insertion loss < 0.05 dB
Max. size 160 / 82 / 82 mm

Material: Case: Aluminum.

Inner conductor: Brass.

Mounting: Bracket included for wall mounting.

May be attached to tubular masts using clamps
listed below (order separately).

Type No.
Description Remarks
Order No.

736 801 1 clamp Mast: 34 – 60 mm diameter

736 802 1 clamp Mast: 60 – 80 mm diameter
736 803 1 clamp Mast: 80 – 100 mm diameter
736 804 1 clamp Mast: 100 – 120 mm diameter
736 805 1 clamp Mast: 120 – 140 mm diameter

144
Low Power Splitter
87.5 – 108 MHz

Compact broadband power

Low power splitters for connecting several antennas splitter for low-loss connection
of several antennas:
Typ No. / Order No. 751 10215 751 10216 751 10217

For connecting ... antennas 2 3 4

Input 7-16 female (equipment and antenna side)
Frequency range 87.5 – 108 MHz
VSWR > 1.07
Impedance 50 Ω
Max. power 400 W (at 50 °C ambient temperature)
Insertion loss < 0.15 dB
Maximum cable diameter For equipment and antenna side:
7/ ″
8
Packing size 200 x 170 x 115 mm

Material: Housing: Weather-resistant cast aluminum.

Weather protection: UV-resistant weather-proof
housing.

Attachment: To tubular masts of 60 – 320 mm diameter

using supplied non-corrosive clamp strap
(1020 x 20 x 1 mm).

A: 140 mm
B: 110 mm
C: 80 mm
D: 100mm

Example 4-way antenna splitter

Splitters
Power

Outputs

Outputs
Input

145
146
 Components for Antenna Systems

Filters and Combiners

Measuring Links

Patch Panels

Coaxial Cables

Dehydrators
Transmitter
Mounting Hardware Rohde & Schwarz

Further accessories available for completing

antenna systems:

– Probe Sections

– Mechanical Oscillation Dampers

Patch Panel
– Obstruction Lights Spinner

Components
Further

Combiner Network
Kathrein

147
148
Filters and Combiners

Kathrein offers a full range of filters and combiners to complete or extend FM and TV
antenna systems.

Combiner units of starpoint, stretchline and directional filter design and filters as well as
any combinations thereof are available for all frequency ranges from 47 – 860 MHz and
for any power levels from 10 Watt – 100 kW.

Special designs can be offered on request, e.g.:

– Filters for the reduction of spurious emissions, especially for DAB.

– Filters for the suppression of IM products.

– OIRT-CCIR multiplexers for combining signals in the OIRT (66 – 73 MHz) and the
CCIR (87.5 – 108 MHz) frequency ranges.

– Multi pattern antenna systems consisting of a sophisticated arrangement of

combiners, power splitters, feeder lines and antenna panels allowing the multiple
use of the antenna aperture.

A separate catalogue “Filters and Combiners” is available from Kathrein.

Components
Further

FM combiner of multi-pattern antenna system Marlow.

149
Measuring Links

Devices for non-mechanical opening

of cables for measurement purposes

Applications

Measuring links are devices that are connected into RF

cable runs. Thus it is possible to open the cable run in an
electrical (non-mechanical) way, allowing to measure into
the cable in both directions.
When closed (in its operating condition), the measuring
link is a completely homogeneous, uniform section of the
transmission line and does not affect the cut-off frequency
of the transmission line system.

Measuring Heads

To permit cable measurements to be performed,

3 measuring heads are available to each size of
measuring links:
1. A measuring head allowing measurements to be taken
in one of both directions with the cable section not
measured being short-circuited.
Connectors: 7-16 or N female.
2. A measuring head with 2 test connectors allows to
measure in both cable directions.
Connectors: 7-16 or N female.
3. A measurement head for cases where the measuring
link is used for providing an emergency cable
connection. Measuring heads of this type can be used
to couple out the full incoming RF energy.

Design Features Measuring link in a cable run

The measuring links are completely watertight and

weatherproof. They are manufactured of red brass
and are therefore resistant to corrosive environments
of any nature.
The measuring links are available in versions with
cable connections from 6 1/8″ to 1 5/8″ EIA-flange or
connectors 13-30 and 7-16.

Technical details are available upon request.

Typical Use of Measuring Links

Measuring link with 3 1/8″ EIA-flanges

antenna
main splitter

normal operation testing

measuring link measuring link
switched through with measuring head

feeder cable

Tx power Measuring link with 3 1/8″ EIA-flanges and 7-16 measuring head

150
Patch Panels

Switching device for providing a spare Upon request, the switching points of the quick-release
connection between transmitter and connectors can be equipped with safety contacts to
avoid the connection of transmitters to unload switching
antenna points.

Applications Connections

If required, patch panels can be used to provide an The connections for transmitter cables or rigid trans-
instant replacement of non-operational transmission line mission lines to the antennas or transmitters are
connections between transmitters and antennas or half available with straight, or when equipped with angle
antennas. To meet different requirements, customer- flanges, with backwards, downwards or upwards
specified patch panels are available with virtually any orientation.
connector type and switching capability.

Design Features

Normally, a patch panel con-

sists of a frontpanel made of
aluminum that contains swit-
ching points and connectors
with locking brackets. Each
patch panel can be equipped
with a duplex power splitter
and with a simultaneous
combining filter, if required.
Typically, patch panels are
intended to be installed into
rack cabinets.

Operation

The connectors with quick-

release locking brackets have
been proven in applications
where spare connections
must be established within
just a few seconds.

Typical Application
(Example: Half Antenna Patch Panel)

Normal Operation Half Antenna Operation

power splitter
upper lower
half antenna half antenna

U-Link or

transmitter or combiner
Components
Further

151
Coaxial Cables and Accessories

A wide variety of coaxial cables, connectors,

cable clamps, earthing kits, hoisting sockets
and other accessories are available for main
and branch feeders.

All components are of broadband type.

The minimum size of coaxial components

is determined by the power handling
requirements and environmental conditions.

Oversized coaxial cables are often used to

reduce cable losses.

Coaxial cables

The power handling capacity and the attenuation vary greatly with the frequency. The
cables are semi-flexible due to the use of corrugated copper tubes as outer conductors.
The inner conductor is centered using a polyethylene helix or polyethylene foam.

Air dielectric cables are available in following dimensions:

3/8″ 5/8″ 7/8″ 1 1/8″ 1 5/8″ 2 1/4″ 3″ 3 1/8″ 4″ 4 1/8″ 5″ 6 1/8″
Air dielectric cables can be filled with dry air or nitrogen of 0.1 – 0.3 bar excess pressure.

Foam dielectric cables are available in following dimensions:

3/8″ 1/2″ 5/8″ 7/8″ 1 1/4″ 1 5/8″

Special versions:
Cables with fire retardent jacket or super-flexible types for narrow bends or improved
power handling capacity are available on request.

Connectors

Coaxial connectors for semi-flexible cables or rigid lines and adaptors are available
in following sizes:

N 7-16 13-30 7/8″ EIA 1 5/8″ EIA 3 1/8″ EIA 4 1/2″ EIA 6 1/8″ EIA

152
Coaxial Cables
Typical Installation Approach

Components
Further

153
Dehydrators

19″ rack version Wall-mounted version

Equipment for maintaining continous air pressure within

RF transmission lines and antenna systems

Cable connector

Typical ventilating system

Feeder cable

Plastic air hose

Hose connection

Applications

Transmitting and receiving antenna systems whose RF transmission lines such as

coaxial cables and power splitter assemblies are filled with dehydrated air operate with
increased reliability.

Operation

It is recommended to use dehydrators with fully automatic regeneration of the desiccant

that allow to continously maintain and monitor the air pressure within RF transmission
and antenna systems.

Design features

Maintenance-free dehydrators for virtually any application are available in different

versions such as wall-mounted units or rack-mount units for installation into standardized
racks with various levels of compressor power and pressure categories.
Technical details are available upon request.

154
Mounting hardware for UHF panels

Components for mounting UHF panels to pipe masts.

Material: Hot-dip galvanized steel.

Stainless steel bolts and nuts are supplied.

Pair of clamps for one UHF panel

Type No. Order No. Suitable for pipe Weight

masts of mm ∅ kg
K 61 14 01 600 481 40 – 95 1.6
K 61 14 02 600 482 60 – 115 1.6
K 61 14 03 600 483 115 – 210 4.0
K 61 14 04 600 484 210 – 380 7.2
K 61 14 05 600 821 380 – 521 10.2

Pair of clamps K 61 14 03

Tilt brackets (pair)

Type No. K 61 30 1
Order No. 600 504

For beam tilt down to 10°

Slant compensation kit

Type No. K 61 30 2
Order No. 600 505

Pair of plates for compensating the slant

(15 mm per m) on tapered masts
Components
Further

155
Mounting hardware for UHF panels

Components for mounting UHF panels to pipe masts.

Material: Hot-dip galvanized steel.

Stainless steel bolts and nuts are supplied.

Remark: The radius from the center of the array to the reference
point of the panel is given by the distance A.

Pair of clamps for two UHF panels

Type No. Order No. Suitable for Weight Distance Angle α between
pipe masts of kg A/mm directions of the
mm ∅ two UHF panels
K 61 15 11 600 869 70 – 150 6.4
K 61 15 12 600 870 150 – 300 8.8 308 80°
K 61 15 13 600 871 300 – 400 8.8

K 61 15 21 600 843 70 – 150 6.4

K 61 15 22 600 844 150 – 300 8.8 266 90°
K 61 15 23 600 845 300 – 400 8.8

Pair of clamps for three UHF panels

Type No. Order No. Suitable for Weight Distance Angle α between
pipe masts of kg A/mm directions of the
mm ∅ three UHF panels
K 61 15 31 600 846 70 – 150 8.4
K 61 15 32 600 847 150 – 300 9.2 308 80°
K 61 15 33 600 848 300 – 400 9.2

K 61 15 41 600 849 70 – 150 8.4

K 61 15 42 600 850 150 – 300 9.2 266 90°
K 61 15 43 600 851 300 – 400 9.2

Pair of clamps for four UHF panels

Type No. Order No. Suitable for Weight Distance Angle α between
pipe masts of kg A/mm directions of the
mm ∅ four UHF panels
K 61 15 52 600 875 150 – 300 27 308 80°
K 61 15 61 600 991 70 – 150 26 258 90°
K 61 15 62 600 874 150 – 260 26 258 90°
Special features: A part of the mount can be swivelled out for easier mast climbing.

156
Mounting hardware for L Band panels

Components for mounting L Band panels to pipe masts.

Material: Stainless steel.

Bolts and nuts are supplied.

Pair of clamps for one L Band panel

Type No. / Suitable for Weight

Order No. pipe masts of g
mm ∅ approx.
734 360 34 – 60 60
734 361 60 – 80 70
734 362 80 – 100 80
734 363 100 – 120 90
734 364 120 – 140 110
734 365 45 – 125 80

Screws supplied

86
10 4 2
0

Downtilt kit
Type No. / Order No. 732 327

(additional clamps are required for

mounting, see table)

Slant compensation kit

Type No. / Order No. 732 319 55 mm

is used for compensating conical masts (additional

clamps are required for mounting, see table)
77
mm

Components
Further

Weight: 200 g

157
Mast clamps

Components for mounting antennas or splitters to pipe masts.

A
Stainless steel bolts and nuts are supplied.

Type No. Order No. Suitable for pipe Weight Dimen-

masts of mm ∅ kg sions mm
K 61 12 0 600 479 60 – 115 3.4 A: 140
B
(pair of B: 250 17.5 mm ∅
clamps) C: 150

Mast clamps for panels

K 52 30 5. and K 52 34 5..

Type No. Order No. Suitable for pipe Weight Dimen-

masts of mm ∅ kg sions mm
K 61 13 0 600 480 115 – 210 4.5 A: 240
(pair of B: 250 B
clamps) C: 180 17.5 mm ∅
C

Mast clamps for panels

K 52 30 5. and K 52 34 5..

Type No. Order No. Suitable for pipe Weight Dimen-

masts of mm ∅ kg sions mm
K 61 16 01 601 647 77 5.8
(without suitable for panels
picture) K 52 33 5.

K 61 16 02 602 052 60 – 125 5.6 A: 50 A

B: 125

Mast clamps for panels

K 52 33 5.

Type No. / Suitable for pipe Weight Dimen-

Order No. masts of mm ∅ kg sions mm
759 044 30 – 340 0.65
Tension band for mounting of the
medium power splitters to pipe masts

158
Technical Annex

10
dB

0
Technical
Annex

159
Antenna System
Configurations

Kathrein offers a wide variety of antenna systems, allowing the broadcaster to select the optimum
configuration for each station.
Following is an overview of various arrays and their typical characteristics and advantages.

Equal power splitting Different power splitting

Three-sided Panel Array
3/7 P

Panel arrangement
The individual panels are designed to
cover an azimuth sector of 120 degrees
and three panels fed with equal power will
result in an omni-directional pattern.
Directional horizontal radiation patterns 1/7 P
can be achieved by using a different
panel arrangement and/or feeding the 3/7 P

panels with unequal power levels.

This arrangement is especially suitable for
triangular and round towers or masts. radiation pattern
(at mid-band)
Horizontal

These broadband systems are available

with horizontal or circular polarization.
10 10

dB

dB
3 3

0 0

Equal power splitting Different power splitting

Four-sided Panel Array 4/10 P
Panel arrangement

1/10 P
The individual panels are designed to
cover an azimuth sector of 90 degrees
so that four panels fed with equal power
will produce an omni-directional pattern.
4/10 P
Again, directional horizontal radiation
pattern can be produced with other panel 1/10 P
arrangements and unequal power fed to
various panels in the array.
radiation pattern

This configuration is especially suitable for

(at mid-band)
Horizontal

square towers or masts.

These broadband systems can be supplied
for any polarization. 10 10
dB

dB

3 3

0 0

Turnstile Antenna

Turnstile and Superturnstile-Antennas U

~
~ 90°
This type of antenna (also known as jU

a “batwing”) produces an excellent ϑ

horizontally polarized omni-directional
pattern. Superturnstile Antenna
A metal mast can be placed in the center
of a turnstile-antenna as long as the mast
has a small diameter relative to the wave-
0.7 λ ~
length of the signal.

0.25 λ
0.5 λ
160
Antenna System
Configurations

Multi-panel Array

If the cross section of the mast or tower is more

than one wavelength it is impossible to obtain
a satisfactory omni-directional horizontal radiation
pattern using three or four panels per bay.
However, an omni pattern can be achieved by
increasing the number of panels per bay.
The horizontal patterns of these “multi-panel”
arrays will vary with frequency, but they can be
designed for excellent omni performance over
limited bandwidths.
Multi-panel arrays are available with horizontal or
vertical polarization.

Special Antenna Systems Inside

Self-supporting GRP Towers

A large-diameter GRP (Glass Reinforced Plastic)

pipe can be utilized to substitute a metal support
structure and enclose an antenna system.
The GRP pipe is transparent to RF energy and it
allows the antenna engineer to use an optimized
antenna design with a small cross-section at the
center of the pipe. Antenna elements may be
dipoles or turnstiles.
The GRP pipe also provides excellent protection
against severe environmental conditions such as
rain, ice, snow, wind and corrosive agents and it
allows access for inspections and maintenance
at any time.
Horizontally and vertically polarized systems can
be supplied. Examples for Radiation Patterns
47 … 88 MHz 87.5 – 108 MHz

Relay Receiving Antennas 10 dB expanded 10 dB expanded

For professional receive applications such as

10 10
transposer/translator inputs Kathrein offer
a full range of antennas including yagis and
dB

dB

3 3
logarithmic-periodic types. 0 0
UHF models are equipped with radomes to 3 units K 52 16 8.. 2 units K 52 22 1..
assure reliable operation in icing conditions and
to protect the antennas against weather damage. 174 – 230 MHz 470 – 860 MHz

Arrays of these antennas are available to provide

very high gain, extremely narrow main lobes, 10 dB expanded
10 dB expanded
and high rejection of co-channel and other
interfering signals coming into the rear and sides
of the array. Receiving antennas and arrays 10 10

are available with either horizontal or vertical

dB

dB

3 3
polarization.
0 0

3 units K 52 22 5.. 4 units K 72 23 4..

Technical
Annex

161
Glossary of Broadcast
Antenna Terms

Antenna Gain The cross section of the mast or tower should be

less than one wavelength for a good omni
The gain of an array describes the increase of pattern. As the cross section increases beyond
signal in the main radiation direction which is one wavelength nulls in the horizontal radiation
produced by reducing radiation in all other pattern will rapidly become deeper.
directions and concentrating it in the main beam.
The gain of a broadcast antenna system is Measurement Links
normally increased by using a larger number of
vertical bays (increasing the vertical aperture) and When large-diameter coax lines are used in an
thereby forming a more narrow vertical radiation antenna system it is not possible to easily
pattern. connect measurement equipment without dis-
In the case of a directional antenna system the assembly of the coax system. In these cases it is
gain is increased by reducing or eliminating advisable to install measurement links in the coax
radiation toward azimuth segments and re- feeders to allow convenient connection of test
directing it toward the areas where coverage is equipment to the antenna system.
desired.
Mismatch Compensation
When calculating the gain of an array the losses
in the feeder cables and the power splitters must In a broadcast panel array the impedance match
be taken into account. of individual panels can be disturbed by mutual
coupling, icing and the presence of nearby
Downtilt in Panel Arrays obstacles. For this reason it is necessary to
design the feed system so as to cancel reflections
When transmitting antennas are located on ele- within the array and thereby minimize the
vated sites it is often beneficial to tilt the main presence of reflected signal at the antenna
beam of the vertical radiation pattern downward system input. This technique is also known as
to provide higher signal levels in the areas to be impedance compensation.
served. There are two ways to accomplish down-
tilt (also known as “beam tilt”). The panels can be Null Fill
mechanically tilted to direct the beam downward,
or phase differences can be introduced into the Panel arrays with multiple vertical bays will exhibit
array feeder system to achieve electrical tilt. deep nulls in the vertical radiation pattern if all
bays are fed with equal phase and amplitude.
Impedance Tuning It is important to fill these nulls for proper signal
coverage.
While the VSWR of a well-designed antenna For TV systems it is not sufficient to provide the
system can be optimized by the use of tuning minimum signal level, but it is necessary to make
devices it is not possible to achieve broad band- the direct signal bigger than any reflexion to avoid
width by compensating for poor components with ghost pictures.
tuners.
The characteristics of a truly high quality antenna There are three methods of introducing null fill in
system are established in many ways, beginning a panel array:
with proper component design and manufacture
followed by competent system design and – Mechanically tilting some panels downward
installation. – Using a non-linear phase taper between bays
– Using an unequal power split between bays
Mast or Tower Dimensions for Panel Arrays
Since some energy is taken from the main beam
The radiation pattern of a panel array depends to fill the null, the maximum gain of the antenna
on the relative positions of the individual panels system will be reduced, typically 0.5 to 1.5 dB,
in space and the relative amplitude and phase of when null fill is introduced.
the RF energy fed to each panel. Therefore it is
necessary to have exact dimensional information
about the supporting tower or mast if one is to
optimize an array design.
162
Glossary of Broadcast
Antenna Terms

Polarization

The polarization is defined as the direction of

the electrical vector, in practice the plane of the
dipoles.
The electric field of an antenna system can be
split into a horizontal and a vertical component.
If there is only one component, the polarization
is pure horizontal or vertical (plane polarized).
If there are two components which are not in
phase, the polarization is elliptical.
For slant polarization both must exist and they
must be in phase.
When an antenna produces vertically and
horizontally polarized fields with equal amplitude
and with a phase difference of exactly 90 degrees,
the resulting signal is circularly polarized.

Power Rating of Components

Generally, the power rating of components refers

to the maximum CW power (or mean power) level
that can be applied to the input.
The maximum mean power output of a TV
transmitter occurs during transmission of a black
picture and it is typically equal to 70 % of the
peak sync power level.

Split Antenna Systems

An antenna system can usually be divided into

upper and lower halves which can be operated
separately.
This arrangement allows the use of one half
for broadcast operations while the other half is
available for painting or maintenance or other
work that must be performed in close proximity
to the antenna.

The signal level will be reduced by 6 dB if one half

of the antenna is fed with one half of the normal
transmitter power. If the full transmitter power is
available, the use of one half of the antenna will
reduce the signal level by only 3 dB.

It will be necessary to climb the mast or tower

to perform antenna switching unless a coax patch
panel is installed at the transmitter output with
two main feeders up to the antenna inputs.
Technical
Annex

163
164
The following information is required to design an optimum antenna system for you:

customer
address
phone FAX

station name:

location:

frequency (MHz) or channels

transmitter power (kW)

min. power rating for system (kW): ■ analog ■ digital

antenna gain or ERP or number of bays:

polarization: horizontal or vertical or slant

horizontal radiation pattern omni or directional

(if directional specificy requirements)

vertical radiation pattern beam tilt:

null fill:

tower square or triangular or round side length or diameter:

azimuth direction of tower face: vertical antenna aperture:

feeder air or foam half antenna no

mode
size half power

connectors full power

length 1 feeder

dehydrator 2 feeders

patch panel combiner measurement link

special climatic conditions

Please contact KATHREIN-Werke KG · G. Klauser · Telephone +49 8031 184-958 · Fax +49 8031 184-495
Anton-Kathrein-Str. 1 – 3 · P.O. Box 10 04 44 · D-83004 Rosenheim · Germany · e-mail: [email protected]
Technical
Annex
 Subject to alteration.
9981.0510/0607/3/ZW/PF

Internet: http://www.kathrein.de
KATHREIN-Werke KG . Telephone +49 8031 184-0 . Fax +49 8031 184-495
Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim . Germany