Scribd
Upload
321 views2 pages

Prestressed Concrete Piling Interaction Diagram: 31.4961 In. Hollow Pile

This document contains a prestressed concrete piling interaction diagram and key design points for a 24x24 inch solid octagonal pile with circular prestressing strands. The diagram plots the relationship between axial load and moment capacity. It shows the design points for maximum axial load, maximum moment, compression-controlled and tension-controlled limits, and pure bending/compression/tension conditions. The key provides the corresponding axial load and moment values at each design point.

Uploaded by

Shirlin Charles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
321 views2 pages

Prestressed Concrete Piling Interaction Diagram: 31.4961 In. Hollow Pile

This document contains a prestressed concrete piling interaction diagram and key design points for a 24x24 inch solid octagonal pile with circular prestressing strands. The diagram plots the relationship between axial load and moment capacity. It shows the design points for maximum axial load, maximum moment, compression-controlled and tension-controlled limits, and pure bending/compression/tension conditions. The key provides the corresponding axial load and moment values at each design point.

Uploaded by

Shirlin Charles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Precast/Prestressed Concrete Inst.

JOB: Piling Spreadsheet Verification Probelm #1 6


200 W. Adams St. #2100 Ph. 312.786.0300 SUBJECT: 24x24 Solid Oct. Pile w / Circular Strand Layout SHEET
Chicago, IL 60606 Fax 312.621.1114 DES. BY: FCH DATE:D OF
Email: [email protected] Web www.pci.org CHK. BY: ATE: 10

Prestressed Concrete Piling Interaction Diagram

31.4961 in. Hollow Pile


30 - 0.4375 in. Dia. f'c= 11.603
ACI Method for Slenderness, kl/r = 34.4

3,000
Design Points

2,500

2,000

1,500

Axial Load fPn


(kips)
1,000

500

0 fFlex = 1.00
fComp = 0.75

-500 Max Axial Load

With Slenderness

Basic with Phi Factor

-1,000
0 200 400 600 800 1,000 1,200 1,400

Moment, fMn (k-ft)

Key Points on Basic Interaction Diagram including f Factors:


Cross-Section Axial Load, fPn Moment, fMn
(kips) (k-ft)

Pure Compression 2732.0 10.0


Maximum Axial Load 2322.2 422.9
Maximum Moment* 1019.9 1139.2
Comp. Controlled Limit 789.6 1118.7
Tens. Controlled Limit 493.8 1299.2
Pure Bending 0.0 955.8
Maximum Tension -658.6 317.7
Pure Tension -797.3 0.0
* Based on point of maximum moment before f factors are applied

You might also like