Scribd
Upload
100 views

Hydratec Blain

Hand Pump Web

Uploaded by

coco MP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100 views

Hydratec Blain

Hand Pump Web

Uploaded by

coco MP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Unbiased Unbranded Reliable

BLAIN PRODUCTS AVAILABLE FROM HYDRATEC

BLAIN HP
HAND PUMP

BLAIN PRODUCTS
AVAILABLE FROM STOCK
AND TO ORDER
Available from Hydratec
(0)1252 871664

BLAIN Hand Pump

Description:
H 11 and H 12 pumps are for application with hydraulic lifting or pressing equipment, for emergency operation of
hydraulic elevators and for the pressure testing of hydraulic systems in general.
The H 11 is constructed for side mounting. The H 12 is fitted with a base plate for separate application.
The built-in relief valve should be adjusted to prevent unintentional high pressure being applied to the system.
A built-in manual valve for releasing pressure from the system is available as an option.

Unbiased Unbranded Reliable


Available from Hydratec
(0)1252 871664

BLAIN Hand Pump

Warning: Only qualified personell should adjust or service valves. Unauthorised manipulation may result in injury,
loss of life or damage to equipment. Prior to servicing internal parts, ensure that the electrical power is switched off
and residual pressure in the valve is reduced to zero.

Installation Air Bleed


The inside diameter of the suction line should not be If the operation of the pump arm does not produce a
less than 8mm diameter (5/16”). The connection of the build up of system pressure, it may be necessary to
suction line to the hand pump must be a perfect seal. release trapped air out of the hand pump by opening
A filter fi tted to the bottom end of the suction line is the air bleed screw E half a turn and pumping several
recommended. strokes until oil appears at the bleed screw thread.

Unbiased Unbranded Reliable


Available from Hydratec
(0)1252 871664

Hydratec Lift Services Limited Hydratec Lift Services Limited © Copyright 2015, Hydratec Lift Services Limited,
Unit 1B, Blackbushe Business Village Unit A5, Axis Point Hareshill Business Park All rights reserved.

Yateley, Hampshire Hill Top Road, Heywood *The technical and performance details contained
GU46 6GA OL10 2RQ within this document have been obtained from orig-
inal manufacturers’ product descriptions. Hydratec
Lift Services Ltd are providing this information as a
t · +44 (0) 1252 871664 t · +44 (0) 1252 871664 guide only and cannot be held responsible should
f · +44 (0) 1252 873601 f · +44 (0) 1252 873601 any performance promises or technical details be
e · [email protected] e · [email protected] incorrect.

we service your clients as you

You might also like