Scribd
Upload
82 views

Turbo Grid

Uploaded by

HayderAlSamawi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
82 views

Turbo Grid

Uploaded by

HayderAlSamawi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ANSYS® TurboGrid™

Product Features ANSYS TurboGrid software provides designers and analysts of rotating
machinery with the automated mesh creation tool required to increase
productivity and optimize design. ANSYS TurboGrid uses superior
technology to create high-quality hexahedral mesh while preserving the
underlying geometry, allowing for accurate and fast CFD analysis.
The ANSYS TurboGrid product is an integral part of the software tools
from ANSYS for rotating machinery within the ANSYS® Workbench™
environment. ANSYS TurboGrid provides almost automatic grid generation
for turbomachinery by creating and smoothing topology, decreasing the
time normally required to create a quality mesh. Automated functions further
simplify the grid-generation step and the analysis of mesh quality. Full
scripting for batch mode operation in parametric analysis also is included.
ANSYS TurboGrid software is a tool that provides fast turnaround of the
grid-generation process to ensure maximum utility from the CFD analysis
process. This is critical in industries in which meeting rigorous
specifications is paramount, and small increases in efficiency can lead to
millions of dollars in profit.
Automation in Grid Generation
Display in 3-D Cartesian, blade-to-blade and meridional views

Automatic topology generation around blade for


single and multiple blade applications

Automatic O-grid generation

Automatic control point placement

Automatic smoothing of topology

Automatic periodic surface and node placement

Automatic topology pattern selection

Automatic element size matching at inlet/passage


and outlet/passage interfaces
Automatic element size matching across topology
edges
Automatic mesh generation in tip region
Automatic element size matching across
O-grid/passage interface
Automatic mesh smoothing
Automatic generation of mesh statistics and
analysis of mesh quality

Automatic parameterization of meridional space


Automatic element size matching from hub to
shroud in tip region

Automatic domain interface placement

Automatic blade surface extension and trimming at


hub, shroud and tip as required

Automatic layer insertion

Automatic detection of leading and trailing edges

www.ansys.com ANSYS, Inc.


Southpointe
Toll Free USA/Canada:
1.866.267.9724
ANSYS, ANSYS Workbench, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature names, logos
and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD
is a trademark used by ANSYS, Inc. under license. All other brand, product, service and feature names or trademarks are the property of
275 Technology Drive Toll Free Mexico: their respective owners.
Canonsburg, PA 15317 001.866.267.9724
USA Europe: Image Credits: Some images courtesy of Aavid Thermalloy, ICT Prague and Silesian University of Technology—Institute of
724.746.3304 44.870.010.4456 Thermal Technology.
[email protected] [email protected]
©2007 ANSYS, Inc. All Rights Reserved. Printed in USA. TurboGrid11_Jan07

You might also like