Scribd
Upload
410 views1 page

Calibration of Rebound Hammer

This document summarizes the calibration of a rebound hammer and field testing on a test item. It provides details on: 1. The calibration method and specifications for the rebound hammer. 2. Ten observations were taken on an anvil with a mean rebound value of 82. 3. Field testing was then conducted on a test item using the calibrated rebound hammer, with details on testing parameters, six observations, a mean rebound value of 30, and compressive strength determination.

Uploaded by

Parvej Ansari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
410 views1 page

Calibration of Rebound Hammer

This document summarizes the calibration of a rebound hammer and field testing on a test item. It provides details on: 1. The calibration method and specifications for the rebound hammer. 2. Ten observations were taken on an anvil with a mean rebound value of 82. 3. Field testing was then conducted on a test item using the calibrated rebound hammer, with details on testing parameters, six observations, a mean rebound value of 30, and compressive strength determination.

Uploaded by

Parvej Ansari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Calibration of Rebound Hammer

Project ID……………………….. Anvil S. No. E 10 – E171 Specified Limit : 81R+2

Date………………………………. Time………………………… Weather - Hot/Cold/Rain/Cloudy

S.N. Parameter Rebound Hammer Test

1. Method (IS :13311 Part – II (1992)

2. Accuracy to the Whole Number


Measurement

3. Ten Observation on 81 83 82 83 81
Anvil
83 82 83 83 82

4. Mean Value 82.3 say 82

Project Name : …………………………………………………………………………………………………………………….

Field Data Sheet for – Rebound Hammer

Equipment Name. AIM – 388 Equipment S. No. : 15366

Identification of test Item …………………………………………………………………………………………………….

Shape : Circular / Rectangular Date of Casting: ……………………………………

Impact Angle : - ( a + 90o ) / ( a - 90o ) / ( a + 45o ) / ( a - 45o ) / ( a - 0o )

S.No. Parameter Rebound Hammer Test

1. Method ( IS : 13311 Part – II ( 1992 ) )

2. Accuracy to the Whole Number


Measurement

3. Six Observation on 28 28 29
Test Item
28 33 33
4. Mean Value 29.8 Say 30

5. Cylindrical
Compressive Strength

Testing By TECHNICAL MANAGER

You might also like