Scribd
Upload
102 views2 pages

Heat Transfer: Inst Ruct Ions T O Candidat Es

This document is a test paper for a heat transfer course consisting of 8 multiple choice questions. It provides instructions to candidates to attempt any 5 questions, with each question carrying 6 marks. The questions cover various topics in heat transfer including transient heat transfer through a steel shaft, thermal conductivity determination using a metallic rod, heat loss calculation for a refrigeration box, effectiveness of a shell and tube heat exchanger, and determination of temperatures in a system of concentrically arranged cylinders. The document also notes that any malpractice by students such as sharing answers or modifying scanned answer sheets will be dealt with under the university's malpractice clauses.

Uploaded by

Jaskaran Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views2 pages

Heat Transfer: Inst Ruct Ions T O Candidat Es

This document is a test paper for a heat transfer course consisting of 8 multiple choice questions. It provides instructions to candidates to attempt any 5 questions, with each question carrying 6 marks. The questions cover various topics in heat transfer including transient heat transfer through a steel shaft, thermal conductivity determination using a metallic rod, heat loss calculation for a refrigeration box, effectiveness of a shell and tube heat exchanger, and determination of temperatures in a system of concentrically arranged cylinders. The document also notes that any malpractice by students such as sharing answers or modifying scanned answer sheets will be dealt with under the university's malpractice clauses.

Uploaded by

Jaskaran Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Roll No. Total No.

of Pages : 02
Total No. of Questions : 08
B.Tech. (ME) (Sem.–6 )
HEAT TRANSFER
Subject Code : BTME-602
M.Code : 71186
Time : 2 Hrs. Max. Marks : 30

INST RUCT IONS T O CANDIDAT ES :


1. Attempt any FIVE question(s), ea ch que stion ca rrie s 6 ma rks .

1) Orange plants were placed in garden overnight in sky at temperature of 260 K. The
temperature of air is 284 K. The convective heat transfer coefficient is 1.65 W/m2 – K. The
leaves of the plant have emissivity of 0.65, Find the temperature of the orange plant leaves
under equilibrium conditions.

2) A 10 cm outer diameter pipe carrying saturated steam at a temperature of 195C is lagged


to 20 cm diameter with magnesia and further lagged with laminated asbestos to 25 cm
diameter. The entire pipe is further protected by a layer of canvas. If the temperature under
the canvas is 20°C, find the mass of steam condensed in 8 hrs on a 100m length of pipe and
interface temperature. Take thermal conductivity of magnesia as 0.07 W/m – K and that of
asbestos as 0.082 W/m – k. Neglect the thermal conductivity of the pipe material. The latent
heat of steam for given conditions can be taken as 1951 kJ/kg–K.

3) A steel shaft of 20 cm diameter is subjected to heat treatment in a furnace at 927°C and


with a convection coefficient of 80 W/m2 – k. The initial temperature of the shaft is 27°C.
Find the time consumed in achieving a center line temperature of 627°C. Take :
 = 7854 kg/m3, k = 48.8 W/m – k, cp = 559 J/kg – K for shaft material.

4) In an experiment to find the thermal conductivity, a metallic rod of diameter 25 mm is


placed in a furnace such that its one half is inserted into the furnace and other half is
projected out in a room at 300 K. Once the steady state reached, the temperatures measured
between two points 76 mm apart were 399 K and 364 K, respectively. Taking a convection
coefficient of 22.7 W/m2 – K, find the thermal conductivity of the metal.

1 | M- 71186 535
5) A vehicle carrying refrigeration box is moving with a speed of 24 m/s on a road with
ambient temperature of 323 K. The dimensions of box are 3 m(H) × 4 m (W) × 10 m (L).
Assume a wall temperature of 283 K and air flow is parallel to the longest side of the box.
Neglecting the heat loss from the front side and backside of the box, calculate heat loss
from four surfaces. For flow over flat surfaces use

Nu = 0.036(Re)0.8(Pr)1/3

The properties of air at bulk mean temperature are :

 = 1.165 kg/m3, Pr = 0.701, cp = 1005 J/kg – K,  = 16 × 10 –6m2/s

6) In a shell and tube heat exchanger, tubes are 4m long, 31 mm outer diameter and 27 mm
inner diameter. Water is heated from 295 K to 318 K by condensing steam at 100 °C on the
outside of the tubes Water flow rate through the tubes is 10 kg/s. Heat transfer on steam
side is 5500 W/m2 – K and on water side is 850 W/m2 – K, Neglecting all other resistances,
find the number of tubes.

7) The temperature of a body of area 0.1 m2 is 900 K. Calculate the total rate of energy
emission, intensity of normal radiation in W/m2 – sr, maximum monochromatic emissive
power and the wavelength at which occurs.

8) Three thin walled long circular cylinders 1, 2, 3 of diameters 15 cm ( = 0.05), 25 cm


( = 0.1), and 35 cm ( = 0.2) respectively are arranged concentrically. Temperature of
cylinder 1 is 80 K and that of cylinder 3 is 300 K. Assuming that there is vacuum inside
annular spaces, determine the steady state temperature attained by cylinder 2.

Note: Any student found attempting answer sheet from any other person(s), using
incriminating material or involved in any wrong activity reported by evaluator shall be
treated under UMC provisions.

Student found sharing the question paper(s)/answer sheet on digital media or with any
other person or any organization/institution shall also be treated under UMC.

Any student found making any change/addition/modification in contents of scanned copy of


answer sheet and original answer sheet, shall be covered under UMC provisions.
2 | M- 71186 535

You might also like