Scribd
Upload
115 views

Contoh Script TCU

The document configures the network topology and settings of a TCU device including: 1. It deletes any existing configurations and creates new Ethernet interfaces, VLAN groups, bridges and VLANs for interfaces like WAN, LTE, Node_B. 2. It sets attributes like port IDs, link layers and VLAN IDs for the interfaces and VLANs. 3. It creates bridges like S1_LTE and OAM_LTE and maps VLANs to these bridges. 4. It checks for consistency and commits the transaction after the configuration is complete.

Uploaded by

Hapilahvciputra Ciciput
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
115 views

Contoh Script TCU

The document configures the network topology and settings of a TCU device including: 1. It deletes any existing configurations and creates new Ethernet interfaces, VLAN groups, bridges and VLANs for interfaces like WAN, LTE, Node_B. 2. It sets attributes like port IDs, link layers and VLAN IDs for the interfaces and VLANs. 3. It creates bridges like S1_LTE and OAM_LTE and maps VLANs to these bridges. 4. It checks for consistency and commits the transaction after the configuration is complete.

Uploaded by

Hapilahvciputra Ciciput
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

starttransaction tcuxl

deletemo tcuxl STN=0,EthernetInterface=AutoInt-2


deletemo tcuxl STN=0,EthernetInterface=AutoInt-1
deletemo tcuxl STN=0,VLANGroup=AutoInt-2,VLAN=AutoInt-2
deletemo tcuxl STN=0,VLANGroup=AutoInt-2
deletemo tcuxl STN=0,VLANGroup=AutoInt-1,VLAN=AutoInt-1
deletemo tcuxl STN=0,VLANGroup=AutoInt-1
deletemo tcuxl STN=0,IPInterface=AutoInt-2
deletemo tcuxl STN=0,IPInterface=AutoInt-1
deletemo tcuxl STN=0,AutoIntegration=0

setmoattribute tcuxl STN=0 stn_name TCU_TEST_RANCO


==> set nama TCU

createmo tcuxl STN=0,EthernetInterface=WAN


==> Creat Port Ethernet Interface name
(Open Port)
setmoattribute tcuxl STN=0,EthernetInterface=WAN portId TN_C
==> Set Port ID
setmoattribute tcuxl STN=0,EthernetInterface=WAN mode AUTO
==> Mode Ethernet Interface (Auto)
setmoattribute tcuxl STN=0,EthernetInterface=WAN sendLinkAlarmAllowed true
==> Link Alarm Allowed (True)

createmo tcuxl STN=0,VLANGroup=WAN


==> Creat Vlan Group
setmoattribute tcuxl STN=0,VLANGroup=WAN depLinkLayer STN=0,EthernetInterface=WAN
==> Set Vlan Group pada Ethernet Interface (Wan)

createmo tcuxl stn=0,ethernetinterface=LTE


setmoattribute tcuxl stn=0,ethernetinterface=LTE portId TN_A
setmoattribute tcuxl stn=0,ethernetinterface=LTE mode auto
setmoattribute tcuxl STN=0,Ethernetinterface=LTE sendLinkAlarmAllowed true

createmo tcuxl stn=0,vlangroup=LTE


setmoattribute tcuxl STN=0,vlangroup=LTE depLinkLayer STN=0,ethernetinterface=LTE

createmo tcuxl STN=0,Bridge=S1_LTE


==> Creat Bridge (S1_LTE)
createmo tcuxl STN=0,Bridge=OAM_LTE
==> Creat Bridge (OAM_LTE)

createmo tcuxl stn=0,vlangroup=WAN,vlan=VLAN_S1_LTE


==> Creat Vlan pada VlanGroup WAN
setmoattribute tcuxl stn=0,vlangroup=WAN,vlan=VLAN_S1_LTE tagvalue 1118
==> Set Vlan ID
setmoattribute tcuxl STN=0,VLANGroup=WAN,VLAN=VLAN_S1_LTE depBridge
STN=0,Bridge=S1_LTE ==> Set Vlan pada Bridge (S1_LTE)

createmo tcuxl stn=0,vlangroup=WAN,vlan=VLAN_OAM_LTE


setmoattribute tcuxl stn=0,vlangroup=WAN,vlan=VLAN_OAM_LTE tagvalue 3718
setmoattribute tcuxl STN=0,VLANGroup=WAN,VLAN=VLAN_OAM_LTE depBridge
STN=0,Bridge=OAM_LTE
createmo tcuxl stn=0,vlangroup=LTE,VLAN=VLAN_S1_LTE
setmoattribute tcuxl STN=0,vlangroup=LTE,VLAN=VLAN_S1_LTE tagvalue 1118
setmoattribute tcuxl STN=0,vlangroup=LTE,VLAN=VLAN_S1_LTE depBridge
STN=0,Bridge=S1_LTE
createmo tcuxl stn=0,vlangroup=LTE,VLAN=VLAN_OAM_LTE
setmoattribute tcuxl STN=0,vlangroup=LTE,VLAN=VLAN_OAM_LTE tagvalue 3718
setmoattribute tcuxl STN=0,vlangroup=LTE,VLAN=VLAN_OAM_LTE depBridge
STN=0,Bridge=OAM_LTE

createmo tcuxl stn=0,ethernetinterface=Node_B


setmoattribute tcuxl stn=0,ethernetinterface=Node_B portId TN_E
setmoattribute tcuxl stn=0,ethernetinterface=Node_B mode auto
setmoattribute tcuxl STN=0,EthernetInterface=Node_B sendLinkAlarmAllowed true

createmo tcuxl stn=0,vlangroup=Node_B


setmoattribute tcuxl STN=0,VLANGroup=Node_B depLinkLayer
STN=0,EthernetInterface=Node_B

createmo tcuxl STN=0,Bridge=Iub


createmo tcuxl STN=0,Bridge=Mub

createmo tcuxl stn=0,vlangroup=WAN,vlan=VLAN_Iub


setmoattribute tcuxl stn=0,vlangroup=WAN,vlan=VLAN_Iub tagvalue 14
setmoattribute tcuxl STN=0,VLANGroup=WAN,VLAN=VLAN_Iub depBridge STN=0,Bridge=Iub

createmo tcuxl stn=0,vlangroup=WAN,vlan=VLAN_Mub


setmoattribute tcuxl stn=0,vlangroup=WAN,vlan=VLAN_Mub tagvalue 2504
setmoattribute tcuxl STN=0,VLANGroup=WAN,VLAN=VLAN_Mub depBridge STN=0,Bridge=Mub

createmo tcuxl stn=0,vlangroup=Node_B,VLAN=VLAN_Iub


setmoattribute tcuxl STN=0,VLANGroup=Node_B,VLAN=VLAN_Iub tagvalue 14
setmoattribute tcuxl STN=0,VLANGroup=Node_B,VLAN=VLAN_Iub depBridge
STN=0,Bridge=Iub

createmo tcuxl stn=0,vlangroup=Node_B,VLAN=VLAN_Mub


setmoattribute tcuxl STN=0,VLANGroup=Node_B,VLAN=VLAN_Mub tagvalue 2504
setmoattribute tcuxl STN=0,VLANGroup=Node_B,VLAN=VLAN_Mub depBridge
STN=0,Bridge=Mub
checkconsistency tcuxl
==> Check konsisten setelah
status scrip operation successed

commit tcuxl forcedcommit


==> commit setelah konsisten

endTransaction tcuxl
==> end transaksi setelah
running script

Getmoattribute

resettofactorysetting
==> command untuk me reset
semua settingan yang ada
Open port pada SIU

setmoattribute siuxl STN=0,EthernetInterface=WAN port SFP


==> untuk open port semua port sfp

createmo siuxl STN=0,EthernetInterface=WAN


setmoattribute siuxl STN=0,EthernetInterface=WAN port WANFastEthernet
==> type port yang akan di open
(WANFastEthernet/FastEthernet/WANGigabit)
setmoattribute siuxl STN=0,EthernetInterface=WAN mode AUTO
setmoattribute siuxl STN=0,EthernetInterface=WAN portNumber 0
==> port number pada SIU sesuai type port
setmoattribute siuxl STN=0,EthernetInterface=WAN sendLinkAlarmAllowed true

createmo siuxl stn=0,ethernetinterface=LTE_BB_2


setmoattribute siuxl stn=0,ethernetinterface=LTE_BB_2 port Gigabit
==> open port sfp untuk port tertentu
setmoattribute siuxl stn=0,ethernetinterface=LTE_BB_2 mode auto
setmoattribute siuxl STN=0,EthernetInterface=LTE_BB_2 portNumber 3
setmoattribute siuxl STN=0,EthernetInterface=WAN sendLinkAlarmAllowed true

You might also like