Scribd
Upload
123 views3 pages

Design of One Way Slab (Continuous) : Given Data

The document provides the design of a one-way continuous slab. Key details include: - The slab has a shorter span of 1275mm and longer span of 3150mm. - The thickness of the slab is designed to be 150mm with an effective depth of 120mm. - Reinforcement of 10mm diameter bars at 150mm centers is provided at the bottom of the slab near supports and midspans. - Checks are performed to ensure the slab depth provides adequate strength, deflection and crack control.

Uploaded by

Parwan Exceltech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views3 pages

Design of One Way Slab (Continuous) : Given Data

The document provides the design of a one-way continuous slab. Key details include: - The slab has a shorter span of 1275mm and longer span of 3150mm. - The thickness of the slab is designed to be 150mm with an effective depth of 120mm. - Reinforcement of 10mm diameter bars at 150mm centers is provided at the bottom of the slab near supports and midspans. - Checks are performed to ensure the slab depth provides adequate strength, deflection and crack control.

Uploaded by

Parwan Exceltech
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Design of One way Slab (Continuous)

Given data:
Shorter span (clear dimension) = 1275 mm
Longer span (clear dimension) = 3150 mm
2
Live load = 3.0 KN/m
Width of support = 230 mm
Fire resistance = 2 hours
Grade of concrete (fck) = 25 N/mm2
Grade of steel (fy) = 500 N/mm2
Load factor = 1.5
Xumax/d = 0.456
Mu limit (Qu) = 3.318
2
bd
Solution:
1.Thickness of slab:
Assume modification factor = 1.6 (% of steel is 0.2%,Refer Fig.4 - IS 456-2000)
Span/depth = 26
Span/depth = 41.6 ~ 42
Clear cover = 25 mm
Required effective depth = 30.357 ~ 60.36 mm
Adopt thickness of slab is = 150 mm
Effective depth of slab (d) = 120.0 mm
2.Effective span:
Least of followig
C/C of support = 1505.0 mm
Clear span + d = 1395.0 mm
For shorter span (lx) = 1395.0 mm
3.Load calculation:
2
Self weight of slab = 3.75 KN/m
2
Floor finish = 1.5 KN/m
2
Partition load = 0.0 KN/m
2
Sunken filling = 0.0 KN/m
Total load = 5.25 KN/m2
Design dead load (W)/m = 7.875 KN/m
Design live load = 4.500 KN/m2
4.Types of slab
Ly/Lx value = 2.47 > 2
The slab is to be designed as One way
5.Design moments:

Sl.No For mid span Dead load Live load Design moment
1 Near middle of end span 1/12 1/10 2.153
2 At middle of Interior span 1/16 1/12 1.688
For support
3 At Support next to the end support 1/10 1/9 2.506
4 At Other Interior support 1/12 1/9 2.250
6.Depth required moment:
d required = √Mu/Quxb 27.479 mm
The slab depth is enough
7.Reinforcements:

Area of steel (Ast) =


0.5 x fck
fy (1- √1- 4.6 x Mu
fck x 1000 x d
2 )1000 x d
Minimum area of steel (Astmin) = 0.12 %
= 180.00 mm2
2
Sl.No For mid span Ast in mm Dia Spacing Provided
1 Near middle of end span 180.00 10 300.00 150 10 mmØ @ 150 mm c/c at bottom
2 At middle of Interior span 180.00 10 300.00 150 10 mmØ @ 150 mm c/c at bottom
For support
3 At Support next to the end support 180.00 10 300.00 150 10 mmØ @ 150 mm c/c at top
4 At Other Interior support 180.00 10 300.00 150 10 mmØ @ 150 mm c/c at top
8.Check for deflection:
% of steel at mid span = 0.436 %
fs value = 99.7
Modification factor = 2.000 (Ref Fig 4 IS 456-2000)
Required effective depth = 26.83 < 120.0 mm
The slab depth is enough
9.Check for crack width:
Level at which crack width is to be calculated (a') = 140 mm 150 a'
2
Modulas of elasticity of steel (Es) = 200000 N/mm
2
Long term modulas of elasticity of concrete (Ec) = 12500 N/mm
Modular ratio (m) = 16
% of steel at mid span = 0.436 %
Neutral axis depth factor (k) = 0.310
Neutral axis depth (Xu) = 37.238 mm
Area of steel provided (Ast)
2
= 523.33 mm
= 4
Cracked moment of inertia (Icr) 74565809.8 mm
Service load moment (M) = 1.125 KN.m/m
Service stress in steel (fst) = 19.98 N/mm2
Strain in concrete at the bottom face (ε1) = 0.00014
Mean tensile strain in concrete (εm) = -0.0003 < 0
The slab is uncracked section
Distance of point from surface of bar (acr) = 80.78 mm
Crack width (wcr) = -0.038 mm < 0.2 mm
The slab depth is enough
9. Results:
Size of slab is 1275 x 3150 mm
Thickness of slab is 150 mm
Reinforcement:
Provide 10 mmØ @ 150 mm c/c at bottom near middle of end span
Provide 10 mmØ @ 150 mm c/c at bottom middle of Interior span
Provide 10 mmØ @ 150 mm c/c at top support next to the end support
Provide 10 mmØ @ 150 mm c/c at top other Interior support
Slab details:
10 mmØ @ 200 mm c/c
10 mmØ @ 400 mm c/c 10 mmØ @ 400 mm c/c
383

319

10 mmØ @ 150 mm c/c


473
1275

473

383
318.8

230
382.5
319

10 mmØ @ 150 mm c/c


1275

191 10 mmØ @ 300 mm c/c

3150

Slab thickness is 150 mm


All dimensions are in mm

You might also like