Scribd
Upload
70 views

List of Experiments: Mandava Institute of Engineering and Technology

The document outlines the list of experiments and equipment for a CAM lab practice at Mandava Institute of Engineering and Technology. The experiments involve writing programs to produce various turning, drilling, threading and other cycles on a CNC lathe machine. Safety guidelines are provided, including keeping the work area clear, wearing proper protective equipment and following general lab safety practices like not eating or drinking in the lab.

Uploaded by

rk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views

List of Experiments: Mandava Institute of Engineering and Technology

The document outlines the list of experiments and equipment for a CAM lab practice at Mandava Institute of Engineering and Technology. The experiments involve writing programs to produce various turning, drilling, threading and other cycles on a CNC lathe machine. Safety guidelines are provided, including keeping the work area clear, wearing proper protective equipment and following general lab safety practices like not eating or drinking in the lab.

Uploaded by

rk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MANDAVA INSTITUTE OF ENGINEERING AND TECHNOLOGY

(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)


VIDYA NAGAR, JAGGAIAH PET- 521275, KRISHNA DIST., A.P., INDIA
www.mandava.ac.in, E-mail: [email protected], Phone: 08654 226868, 226768

CAM LAB PRACTICE

List of Experiments
1. To write a program to obtain the facing cycle in the CNC Lathe.
2. To write a program to obtain the turning cycle in the CNC lathe.
3. To write a program to obtain the step turning cycle in the CNC lathe.
4. To write a program to obtain the taper turning cycle-1 in the CNC lathe.
5. To write a program to obtain the taper turning cycle-2 in the CNC lathe.
6. To write a program to obtain the circular interpolation in the CNC lathe.
7. To write a program to obtain the drilling cycle in the CNC lathe.
8. To write a program to obtain the threading cycle in the CNC lathe.
9. To write a program to obtain the grooving cycle in the CNC lathe.

List of Equipments
 CNC Lathe machine.
MANDAVA INSTITUTE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE, New Delhi and Affiliated to JNTUK, Kakinada)
VIDYA NAGAR, JAGGAIAH PET- 521275, KRISHNA DIST., A.P., INDIA
www.mandava.ac.in, E-mail: [email protected], Phone: 08654 226868, 226768

Do’s
 Always keep the area around the machine clear of obstacles.
 Always stack material where you can reach it but where it is clear of the moving parts of
the machine.
 Always check that tools are sharp and set correctly.
 Read labels carefully.
 Wear gloves when using any hazardous tools.
 If you have long hair or loose clothes, make sure it is tied back or confined.
 If leaving a lab unattended, turn off all ignition sources and lock the doors.
 Wash hands before leaving the lab and before eating.

 Guards on machinery must be in place during operation

Don’ts
 Never wear gloves.
 Never wear loose clothing or jewelry.
 Never place hands near a revolving spindle.
 Never leave the machine so that someone else is able to start it by pressing the cycle start
button.
 Never eat, drink, or smoke while working in the laboratory.
 Never work alone in laboratory.
 Do not use any equipment unless you are trained and approved as a user by your Lab
staff..
 Never, ever modify, attach or otherwise change any high voltage equipment.

You might also like