Scribd
Upload
141 views1 page

Steel Conv Belt - 1800-ST2250-8+6 FR-LRR-TKIL-NK Project

This technical datasheet provides specifications for a steel cord conveyor belt with a nominal breaking strength of 2250 kN/m. It has a width of 1800mm, thickness of 21mm, and weighs approximately 62kg/m. The belt contains 97 steel cords arranged in a 9/79/9 configuration with a diameter of 6.8mm and cord pitch of 30.4/15.2/30.4mm. The datasheet lists over 30 specifications for the steel cords, cover rubber, adhesion, dimensions, and other performance characteristics of the conveyor belt.

Uploaded by

Caspian Datta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
141 views1 page

Steel Conv Belt - 1800-ST2250-8+6 FR-LRR-TKIL-NK Project

This technical datasheet provides specifications for a steel cord conveyor belt with a nominal breaking strength of 2250 kN/m. It has a width of 1800mm, thickness of 21mm, and weighs approximately 62kg/m. The belt contains 97 steel cords arranged in a 9/79/9 configuration with a diameter of 6.8mm and cord pitch of 30.4/15.2/30.4mm. The datasheet lists over 30 specifications for the steel cords, cover rubber, adhesion, dimensions, and other performance characteristics of the conveyor belt.

Uploaded by

Caspian Datta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Datasheet for Steel cord conveyor belt

Rev.0 Date: 16.08.2019


Ref.TKII NTPC NORTH KARANPURA PROJECT

Ref. Standard UOM Specification Tolerance


1 Nominal Breaking Strength DIN EN ISO 15236 kN/m 2250 Min.
2 Width do mm 1800 + 20/-0
3 Thickness do mm 21 +2.1/-0
4 Belt Weight (APPROX) kg/m ~ 62 Approx.
Steel cord
5 Number of Steel cords Number 97(9/79/9) ±0
6 Diameter of cord mm 6.8 ±0.21
7 Cord Pitch- variable mm 30.4/15.2/30.4 ±1.5
8 Breaking Strength of cord, Min. kN 42 Min.
9 Construction of Steel cord Open type 7x7 nil
10 Steel cord cross reinforcement at top and Bottom Special Steel
Cover rubber DIN K/FR- LRR
11 Thickness of Top cover mm 8 +1.0/-0.0
12 Thickness of Bottom cover mm 6 +1.0/-0.0
13 Tensile strength: Top/ Bottom, DIN EN ISO 15236 N/mm2 Min. 20 / (12-2,+open)
14 Change in tensile strength after aging at 7d/70 °C, Max, do % -25 Max.
15 Elongation at break, Min. do % 350 Min.
16 Change in elongation at break after aging at 7d/70 °C,Max. do % -25 Max.
17 Hardness do Shore A 65 ±5
18 Abrasion loss, Top / Bottom, do mm3 175 / 150 Max.

Pull Out Strength of cord


19 Static Pull out Strength of cord as received, Min. DIN EN ISO 15236 N/mm 119 Min.
20 Pull Out Strength of cord after Thermal Treatment, Min. do N/mm 109 Min.
Adhesion
21 Top Cover/Bonding Rubber, Min. DIN EN ISO 15236 N/mm 15 Min.
22 Bottom Cover/Bonding Rubber, Min. do N/mm 15 Min.

Belt Length/Elliptical type Steel packing Reel dimension


23 Total length (tentatively) m 31004
450 x 66 rolls + 412 x 1
24 Belt Length break up (tentatively) m roll + 392 x 1 roll + 250 x
02 rolls.
25 Number of Reels (tentatively) no. 70
26 Gross weight per reel (APPROX) t 29.5
27 Reel dimension: Length x Width x Height of Roll(Approx) m 4.25 X 2.05 X 3.25
28 Core dia and core hole mm 500 and 210 x 210

29 Troughabaility ISO15236-1 0.35± 0.03


30 Force at Point -1 at 6-Point Rig test PCBI N 20 - 80
Flamability
31 Duration of Flame, Max. ISO-340,Cl no.5.3.3.1 sec 45 Max.
32 Individual Value, Max. do sec 15 Max.
33 Electrical surface Resistivity of cover, Max,. CAN-CSA-C M422-14 Mega Ohms 300 Max.
34 Drum Friction temperature do °C 400 Max.

For any technical dispute, data sheet will supersede other doc.

R&D

You might also like