Scribd
Upload
246 views2 pages

400w Heavy Duty Sand Rail Electric Power Steering Kit PDF

This document provides instructions for installing a 400w electric power steering kit. The red and black wires from the kit must be connected directly to the battery, not through a fuse box. Any alterations to the existing wires between the steering computer and motor will void the warranty. The document also provides a table explaining common fault codes, diagnoses, and suggested solutions that may appear if there is a malfunction with an electronic part of the power steering system.

Uploaded by

Romanko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
246 views2 pages

400w Heavy Duty Sand Rail Electric Power Steering Kit PDF

This document provides instructions for installing a 400w electric power steering kit. The red and black wires from the kit must be connected directly to the battery, not through a fuse box. Any alterations to the existing wires between the steering computer and motor will void the warranty. The document also provides a table explaining common fault codes, diagnoses, and suggested solutions that may appear if there is a malfunction with an electronic part of the power steering system.

Uploaded by

Romanko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

400w Electric Power Steering Kit

This Side Towards


Rack & Pinion Kartek Off-Road
2871 Ragle Way
Corona CA 92879
951.737.7223
kartek.com

Torque Sensor Faces


Towards Driver

NOTE: The red and black wires must go directly


to the battery. Do NOT wire this to your fuse box.
Do NOT cut the wires that lead from the computer
to the motor. Any alterations to those wires voids
any warranty.
Kartek Off-Road
2871 Ragle Way
Corona CA 92879
951.737.7223
kartek.com

NOTE: The red and black wires must go directly to the battery. Do NOT
wire the computer to your fuse box. Wiring the computer to the fuse
box allows for a short voltage drop that turns the unit off intermittently.
Do NOT cut the wires that lead from the computer to the motor. Any
alterations to those wires voids any warranty.
If there is a malfunction with an electronic part, the system will create a code to identify the problem. Each fault
code displays a series of flashes with a fault light. Every fault code is composed of double digits, each double
digit is indicated by a series of long and short flashes of light. Each long flash is 2 seconds in length and each
short flash is 1 second in length .There will be 3 seconds space between the long flashes and the short flashes.
For example: long flash\long flash \space\short flash represents the code number 21.

Example:

Code Diagnosis content fault code wave Suggestion

21 Main torque sensor disconnection 1.Check sensor wire harness


2.Replace ECU
22 Main torque sensor output error (voltage is too high or low)

23 Sub. torque sensor disconnected

24 Sub. torque sensor output error (voltage is too high or low)

25 Main and Sub. torque sensor difference is too large

26 Main torque sensor inner fault


Replace ECU
35 Current sensor zero offset is too large

32 Motor disconnected 1. Re-insert wire of the motor


2. Replace ECU

33 Current of ECU is over the limit


Replace ECU
34 One side of motor has no assistance

36 Motor voltage abnormal 1.Check motor wire


2.Check motor plug

400w Electric Power Steering Kit

You might also like