Liquid Level Gages

and Valves
GLASS-TRAC CONTENTS
LIQUID LEVEL
GAGES REFLEX GAGES
With Straight-Thru Connections . . . . . . . . . . . . . . . . . . . .2

and VALVES With Close Hook-up Connections . . . . . . . . . . . . . . . . . .2

Pressure Ratings and Dimensions . . . . . . . . . . . . . . . . 3-4
TRANSPARENT GAGES
With Straight-Thru Conections . . . . . . . . . . . . . . . . . . . . .5
With Close Hook-up Connections . . . . . . . . . . . . . . . . . . . 5
Pressure Ratings and Dimensions . . . . . . . . . . . . . . . . .6-7
ORDERING INFORMATION OFFSET VALVES
Please Specify:
Type 1S and 1U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
• Gage Size Number Type 2S and 2U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
• Type of Service Type 3S and 3U (OS&Y) . . . . . . . . . . . . . . . . . . . . . . . . 9
• Temperature Limits Type 7S and 7U (OS&Y) . . . . . . . . . . . . . . . . . . . . . . . . 10
• Pressure Limits STRAIGHT-THRU VALVES
• Type of Connections Type 4S and 4U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
• Special Functions Type 5S and 5U (OS&Y) . . . . . . . . . . . . . . . . . . . . . . . .12
• Vessel Centers if Close Hook-up TUBULAR GAGES AND VALVES
Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
GAGE NUMBERING SYSTEM Tubular Valves (Brass) . . . . . . . . . . . . . . . . . . . . . . . . . 14
Example: 71-RL: Tubular Valves (Type 1T and 2T) . . . . . . . . . . . . . . . . . .15
7 is #7 Glass (#1 through #9) SPECIALTY GAGES
1 is One-Section Gage (1, 2, 3, 4, . . .) Welding Pad Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
R is Reflex (T-Transparent) Large Chamber for Viscous Liquids . . . . . . . . . . . . . . 17-18
L is Low Pressure Series (M = Mid, H = Heated/Cooled Externally . . . . . . . . . . . . . . . . . . . . .19-20
Frost-Prevention Extension . . . . . . . . . . . . . . . . . . . .21-22
High, WP = Weld Pad)
Illuminators (Explosion-Proof) . . . . . . . . . . . . . . . . . . . . 23
Quick-Opening Levers . . . . . . . . . . . . . . . . . . . . . . . . . .24
(Add appropriate digits or letters to indicate
DIMENSIONAL DATA
special purpose gage or accessory)
Flat Gage Glasses . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Gage Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
HC Externally Heating/Cooling Gages Tank Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
FP Frost Preventive Extensions Installation: Standard Gages . . . . . . . . . . . . . . . . . . . . 28
LC Large Chamber Gage Installation: Close Hook-up . . . . . . . . . . . . . . . . . . . . . 29
EP Explosion Proof Illuminator
CH Close Hook-up Connections

Carbon steel is the standard material for all Glass-Trac low, mid and high pressure liquid level gages. The percentages of
carbon steel pressure ratings for optional gage materials are listed below.

GAGES GASKETS
Stainless Steel 300 & 400 Types . . . . . . . . . 100% Special Acid Sheet Gasketing . . . . . . . . . . . . . . 75%
Monel, Hastelloy B & C . . . . . . . . . . . . . . . . . 90% Teflon®, KEL-F® . . . . . . . . . . . . . . . . . . . . . . . . 50%
Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50% Glass Filled Teflon . . . . . . . . . . . . . . . . . . . . . . 100%

Teflon is a registered trademark of DuPont. All specification are subject to change without notice as part of a continuing program of product improvement.
KEL-F Is a registered trademark of 3M.
REFLEX GAGES MATERIALS
Glass-Trac Reflex Gages use prism glass to
provide an excellent indication of the liquid level. BODY (LIQUID CHAMBER): Accurately machined
from square tubes to provide perfect seating for gage
All liquids appear black in high contrast to the
glasses. Glass is recessed for protection. Body
mirror-like surface above. This clean line of materials include 316 stainless steel and carbon steel.
separation can be sighted from many yards COVER: Glass-Trac gage covers are made of carbon
away. Reflex Gages are made in three steel or 316 stainless steel in all their sizes and
pressures series (maximum 4000 psig @ 100ºF) pressure ratings for higher strength and dependable
and are tapped for ½” or ¾” NPT connections. service. All covers are machined to provide recessed
The standard Glass-Trac level gages are seating protection for the glass.
designed for minimum -20ºF service. GLASS: All standard Glass-Trac Reflex Gages use
On Glass-Trac Reflex Close Hook-up Gages tempered borosilicate glass in nine standard lengths.
with ½” NPT connections, the center-to-center Each glass has expertly molded reflecting prisms.
GASKETS & CUSHONS: High grade non-asbestos is
dimensions is the same as the overall length on
used in gaskets and cushions for Glass-Trac gages.
standard gages. On Close Hook-up Gages with The machined recess in the gage body and cover
¾” NPT connections, the center-to-center protects the gasket and cushion as well as the glass.
dimensions is the same as the overall length on BOLTS: Glass-Trac gage bolts are made of alloy
standard gages plus ⅜”. steel, ASTM A-193 Grade B7.
NUTS: Gage nuts are made of steel, ASTM A-194
Grade 2H.
(Torque instructions for gage bolts are on the back cover.)

TYPICAL REFLEX TYPICAL-REFLEX

TOP/BOTTOM CLOSE HOOK-UP

2
 PRESSSURE RATINGS & DIMENSIONS
Reflex Gages
(With Straight-Thru Connections)

SIZES AND WEIGHTS

CLOSE HOOK-UP
SIZE NUMBERS OVER-ALL LENGTH (IN.) CENTER-TO-CENTER (IN.) APPROX. WT. (LBS.)
VISIBLE GLASS
GLASS SIZE
A (STD)* MID-
LOW MID- HIGH A (CH) A (CH) (IN.) D D LOW
1/2" or 3/4" HIGH
PRESS. PRESS. PRESS. 1/2" NPT 3/4" NPT B C 1/2" NPT 3/4" NPT PRESS.
NPT PRESS.

SINGLE-SECTION GAGE
11 RL 11 RM 11 RH 5 1/4 8 7/8 9 1/4 3 3/4 3 3/4 5 1/4 5 5/8 7 8
21 RL 21 RM 21 RH 6 1/4 9 7/8 10 1/4 4 3/4 4 3/4 6 1/4 6 5/8 8 9
31 RL 31 RM 31 RH 7 1/4 10 7/8 11 1/4 5 3/4 5 3/4 7 1/4 7 5/8 9 11
41 RL 41 RM 41 RH 8 1/4 11 7/8 12 1/4 6 3/4 6 3/4 8 1/4 8 5/8 10 12
51 RL 51 RM 51 RH 9 3/8 13 13 3/8 7 7/8 7 7/8 9 3/8 9 3/4 12 14
61 RL 61 RM 61 RH 10 5/8 14 1/4 14 5/8 9 1/8 9 1/8 10 5/8 11 14 16
71 RL 71 RM 71 RH 11 3/4 15 3/8 15 3/4 10 1/4 10 1/4 11 3/4 12 1/8 15 18
81 RL 81 RM 81 RH 13 3/8 17 17 3/8 11 7/8 11 7/8 13 3/8 13 3/4 17 20
91 RL 91 RM 91 RH 14 1/8 17 3/4 18 1/8 12 5/8 12 5/8 14 1/8 14 1/2 18 21
TWO-SECTION GAGE
32 RL 32 RM 32 RH 14 1/2 18 1/8 18 1/2 13 5 3/4 14 1/2 14 7/8 19 22
42 RL 42 RM 42 RH 16 1/2 20 1/8 20 1/2 15 6 3/4 16 1/2 16 7/8 22 25
52 RL 52 RM 52 RH 18 3/4 22 3/8 22 3/4 17 1/4 7 7/8 18 3/4 19 1/8 24 28
62 RL 62 RM 62 RH 21 1/4 24 7/8 25 1/4 19 3/4 9 1/8 21 1/4 21 5/8 27 32
72 RL 72 RM 72 RH 23 1/2 27 1/4 27 1/2 22 10 1/4 23 1/2 23 7/8 29 35
82 RL 82 RM 82 RH 26 3/4 30 3/8 30 3/4 25 1/4 11 7/8 26 3/4 27 1/8 34 40
92 RL 92 RM 92 RH 28 1/4 31 7/8 32 1/4 26 3/4 12 5/8 28 1/4 28 5/8 37 43
THREE-SECTION GAGE
63 RL 63 RM 63 RH 31 7/8 35 1/2 35 7/8 30 3/8 9 1/8 31 7/8 32 1/4 41 48
73 RL 73 RM 73 RH 35 1/4 38 7/8 39 1/4 33 3/4 10 1/4 35 1/4 35 5/8 45 53
83RL 83 RM 83 RH 40 1/8 43 3/4 44 1/8 38 5/8 11 7/8 40 1/8 40 1/2 52 60
93 RL 93 RM 93 RH 42 3/8 46 46 3/8 40 7/8 12 5/8 42 3/8 42 3/4 55 64
FOUR-SECTION GAGE
74 RL 63 RM 63 RH 47 50 5/8 51 45 1/2 10 1/4 47 47 3/8 60 71
84 RL 73 RM 73 RH 53 1/2 57 1/8 57 1/2 52 11 7/8 53 1/2 53 7/8 69 80
94 RL 83 RM 83 RH 56 1/2 60 1/8 60 1/2 55 12 5/8 56 1/2 56 7/8 72 85
FIVE-SECTION GAGE
75 RL 75 RM 75 RH 58 3/4 62 3/8 62 3/4 57 1/4 10 1/4 58 3/4 59 1/8 74 88
85 RL 85 RM 85 RH 66 7/8 70 1/2 70 7/8 65 3/8 11 7/8 66 7/8 67 1/4 86 100
95 RL 95 RM 95 RH 70 5/8 74 1/4 74 5/8 69 1/8 12 5/8 70 5/8 71 90 106
*3/4” NPT Tapped High Pressure Gages Add “1 ½” to ‘A’ Dimension.
3
Reflex Gages
(With Close Hook-Up Connections)

PARTS
ITEM
NAME MATERIAL
NO.
1 CHAMBER CARBON STEEL
2 COVER CARBON STEEL
3 GLASS TEMPERED
4 GASKET NON-ASBESTOS
5 CUSHION NON-ASBESTOS
6 BOLT ASTM A193 B7
7 NUT ASTM A194 2H

PRESSURE RATINGS AT º F*

LOW PRESSURE GAGE**

Glass 100º 200º 300º 400º 500º 600º 700º
Size
1 2400 2320 2240 2150 2000 1780 1520
2 2325 2250 2170 2090 1940 1720 1470
3 2250 2180 2100 2020 1880 1670 1420
4 2175 2100 2020 1940 1820 1600 1370
5 2100 2030 1960 1880 1750 1550 1320
6 2025 1950 1890 1810 1680 1500 1280
7 1950 1890 1820 1750 1630 1440 1230
8 1875 1820 1750 1680 1560 1390 1180
9 1800 1740 1680 1620 1510 1340 1140
MID-PRESSURE GAGE**
Glass 100º 200º 300º 400º 500º 600º 700º
Size
1 3000 2900 2800 2690 2500 2220 1890
2 2910 2820 2720 2600 2420 2150 1840
3 2820 2720 2625 2530 2350 2080 1780
4 2725 2640 2560 2460 2270 2040 1740
5 2630 2540 2460 2360 2190 1950 1660
6 2535 2450 2360 2270 2110 1875 1600
7 2440 2360 2280 2190 2030 1805 1540
8 2345 2270 2190 2110 1960 1740 1480
9 2250 2180 2100 2020 1880 1670 1420
HIGH PRESSURE GAGE**
Glass 100º 200º 300º 400º 500º 600º 700º
Size
ALL 4000 3890 3790 3700 3470 3080 2530

*Gages for service to 800º F are available. Consult the

factory for the application and ratings.
** Saturated steam to 300 WSP. Above 300 WSP, use
transparent gage with mica shields.

4
 TRANSPARENT MATERIALS
GAGES
-
BODY (LIQUID CHAMBER): Accurately machined from
square tubes to provide perfect seating for gasket, and gage
glasses. Both glasses are recessed for protection. Body
materials include Type 316 stainless steel and carbon steel.
Glass-Trac Transparent Gages use clear, see- COVERS: Both covers on transparent gages are carefully
through glass on both sides so that both the color machined to provide perfect seating for cushions and gage
and the interface of liquids can be viewed. Electric glasses. This machining also provides deep recessed
lighted gage illuminators are available for use on seating in the cover for added glass protection. Covers are
Transparent Gages and provide easy viewing of available in Type 316 stainless steel and in carbon steel.
liquid levels in dimly lighted areas. Transparent GLASS: All standard Glass-Trac Transparent Gages use
Gages are made in three pressure series tempered borosilicate glass in nine standard lengths. Each
(maximum 3000 psig @ 100ºF) and are tapped for transparent glass is crystal clear and has the highest strength
½” or ¾” NPT connections. The standard Glass- possible.
Trac level gages are designed for -20ºF service. GASKET & CUSHIONS: High grade non-asbestos is used in
On Glass-Trac Transparent Close Hook-up gaskets and cushions for Glass-Trac gages. The machined
Gages with ½” NPT connections, the center-to- recess in the gage body and cover protects the gasket and
center dimension is the same as the overall length cushion as well as the glass.
on standard gages. On Close Hook-up Gages with BOLTS: Glass-Trac gage bolts are made of alloy steel,
¾” NPT connections the center-to-center ASTM
dimensions is the same as the overall length on A-193 Grade B7.
standard gages plus ⅜”. NUTS: Gage nuts are made of steel, ASTM A-194 Grade
2H.
(Torque instructions for gage bolts are on Back Cover.)

TYPICAL TRANSPARENT TYPICAL TRANSPARENT

TOP/BOTTOM CLOSE HOOK-UP

5
PRESSURE RATINGS & DIMENSIONS:
Transparent Gages
(With Straight-thru Connections)

SIZES AND WEIGHTS

C LO S E H O O K- UP
SIZE NUMBERS OVER-ALL LENGTH (IN.) VISIBLE GLASS C E N T E R - T O - C E N T E R ( IN .) APPROX. WT. (LBS)
GLASS SIZE
A(STD)*
LOW MID- HIGH A(CH) A(CH) (IN.) D D LOW MID-HIGH
1/2 OR 3/4
PRESS. PRESS. PRESS. 1/2 NPT 3/4 NPT B C 1/2" NPT 3/4" NPT PRESS. PRESS.
NPT
SINGLE SECTION GAGE
11 TL 11 TM 11 TH 5 1/4 8 7/8 9 1/4 3 3/4 3 3/4 5 1/4 5 5/8 10 12
21 TL 21 TM 21 TH 6 1/4 9 7/8 10 1/4 4 3/4 4 3/4 6 1/4 6 5/8 11 14
31 TL 31 TM 31 TH 7 1/4 10 7/8 11 1/4 5 3/4 5 3/4 7 1/4 7 5/8 14 17
41 TL 41 TM 41 TH 8 1/4 11 7/8 12 1/4 6 3/4 6 3/4 8 1/4 8 5/8 16 19
51 TL 51 TM 51 TH 9 3/8 13 13 3/8 7 7/8 7 7/8 9 3/8 9 3/4 17 21
61 TL 61 TM 61 TH 10 5/8 14 1/4 14 5/8 9 1/8 9 1/8 10 5/8 11 19 24
71 TL 71 TM 71 TH 11 3/4 15 3/8 15 3/4 10 1/4 10 1/4 11 3/4 12 1/8 21 27
81 TL 81 TM 81 TH 13 3/8 17 17 3/8 11 7/8 11 7/8 13 3/8 13 3/4 24 30
91 TL 91 TM 91 TH 14 1/8 17 3/4 18 1/8 12 5/8 12 5/8 14 1/8 14 1/2 26 32
TWO-SECTION GAGE
32 TL 32 TM 32 TH 14 1/2 18 1/8 18 1/2 13 5 3/4 14 1/2 14 7/8 27 33
42 TL 42 TM 42 TH 16 1/2 20 1/8 20 1/2 15 6 3/4 16 1/2 16 7/8 32 38
52 TL 52 TM 52 TH 18 3/4 22 3/8 22 3/4 17 1/4 7 7/8 18 3/4 19 1/8 36 43
62 TL 62 TM 62 TH 21 1/4 24 7/8 25 1/4 19 3/4 9 1/8 21 1/4 21 5/8 40 49
72 TL 72 TM 72 TH 23 1/2 27 1/4 27 1/2 22 10 1/4 23 1/2 23 7/8 43 54
82 TL 82 TM 82 TH 26 3/4 30 3/8 30 3/4 25 1/4 11 7/8 26 3/4 27 1/8 50 61
92 TL 92 TM 92 TH 28 1/4 31 7/8 32 1/4 26 3/4 12 5/8 28 1/4 28 5/8 51 64
THREE-SECTION GAGE
63 TL 63 TM 63 TH 31 7/8 35 1/2 35 7/8 30 3/8 9 1/8 31 7/8 32 1/4 59 73
73 TL 73 TM 73 TH 35 1/4 38 7/8 39 1/4 33 3/4 10 1/4 35 1/4 35 5/8 63 80
83 TL 83 TM 83 TH 40 1/8 43 3/4 44 1/8 38 5/8 11 7/8 40 1/8 40 1/2 75 92
93 TL 93 TM 93 TH 42 3/8 46 46 3/8 40 7/8 12 5/8 42 3/8 42 3/4 78 97
FOUR-SECTION GAGE
74 TL 74 TM 74 TH 47 50 5/8 51 45 1/2 10 1/4 47 47 3/8 85 107
84 TL 84 TM 84 TH 53 1/2 57 1/8 57 1/2 52 11 7/8 53 1/2 53 7/8 100 122
94 TL 94 TM 94 TH 56 1/2 60 1/8 60 1/2 55 12 5/8 56 1/2 56 7/8 104 129
FIVE-SECTION GAGE
75 TL 75 TM 75 TH 58 3/4 62 3/8 62 3/4 57 1/4 10 1/4 58 3/4 59 1/8 106 134
85 TL 85 TM 85 TH 66 7/8 70 1/2 70 7/8 65 3/8 11 7/8 66 7/8 67 1/4 124 152
95 TL 95 TM 95 TH 70 5/8 74 1/4 74 5/8 69 1/8 12 5/8 70 5/8 71 129 161

*3/4 “NPT Tapped High Pressure Gages Add 1 ½” to ‘A’ Dimensions. 6

 Transparent Gages
(With Close Hook-up Connections)

PARTS
ITEM
NAME MATERIAL
NO.
1 CHAMBER CARBON STEEL
2 COVER CARBON STEEL
3 GLASS TEMPERED
4 GASKET NON-ASBESTOS
5 CUSHION NON-ASBESTOS
6 BOLT ASTM A193 B7
7 NUT ASTM A194 2H

PRESSURE RATINGS AT º F*

LOW PRESSURE GAGE**

GLASS
100º 200º 300º 400º 500º 600º 700º
SIZE
1 2000 1935 1870 1790 1660 1480 1260
2 1815 1750 1690 1620 1510 1340 1150
3 1630 1580 1520 1460 1360 1210 1050
4 1440 1390 1340 1290 1200 1060 900
5 1250 1210 1170 1120 1040 920 790
6 1065 1030 995 950 890 790 680
7 875 845 815 785 730 645 550
8 690 665 645 620 575 510 440
9 500 480 465 445 415 370 320
Maximum Saturated Steam 350 WSP
MID-PRESSURE GAGE**
GLASS
100º 200º 300º 400º 500º 600º 700º
SIZE
1 2500 2420 2340 2240 2080 1850 1580
2 2315 2250 2170 2090 1940 1720 1470
3 2130 2060 1990 1910 1770 1575 1340
4 1940 1875 1810 1740 1620 1435 1230
5 1750 1690 1630 1570 1460 1295 1100
6 1565 1510 1460 1400 1305 1160 990
7 1375 1330 1280 1230 1145 1015 870
8 1190 1150 1110 1065 990 880 750
9 1000 970 935 895 835 740 630
Maximum Satrated Steam 750 WSP with Mica Shield
HIGH PRESSURE GAGE**
GLASS
100º 200º 300º 400º 500º 600º 700º
SIZE
ALL 3000 2920 2850 2780 2600 2310 1890
*Gages for service up to 800ºF are available. Consult the factory for
application and ratings.

7
GAGE ACCESSORY: The Quest-Tec Solutions See-Level™ LED Illuminator
for hazardous locations utilizes the latest technology to
Illuminators provide brilliant green back lighting to any process gage.
(Explosion-Proof) Innovative circuitry allows for the use of an individual
light source every ½” along the length of any gage. With
a life span of over 100,000 hours each, light source is
likely to never need replacing. Even in the event of an
individual lamp failure, the design provides lighting
overlap ensuring that the fluid level is always illuminated.
All of this is accomplished with a meager 5 watts of
power usage.

Through the use of new attachment techniques, the See-

Level™ Illuminator readily mounts to any brand of
existing or new process gages in a matter of minutes
without the loosening of any cover bolting. Mounting
requires no special tools or modifications to the existing
structure. Set it up, attach the power and go! It’s that
easy.

The modular design allows for a single illuminator to be

manufactured to your specific visible length eliminating
the labor involved in mounting and wiring multiple
illuminators.

23