02/02/2019 MADE EASY ONLINE TEST SERIES

https://gw-mdsy.s3-accelerate.amazonaws.com/2019/student/profile/69696
Subham Bardhan 
(Enroll User) Sign out

GENERAL PRINCIPLES OF DESIGN, DRAWING, IMPORTANCE OF SAFETY (ESE - 2018) - REPORTS

OVERALL ANALYSIS COMPARISON REPORT SOLUTION REPORT

Subham Bardhan
Course: ESE ALL(25) CORRECT(2) INCORRECT(0) SKIPPED(23)
Civil Engineering (CE)

HOME
Q. 1
MY TEST
The unit of Representative Fraction (RF) is
Have any Doubt ?
BOOKMARKS

A cubic centimeter
MY PROFILE

REPORTS B square centimeter

BUY PACKAGE
C centimeter

ASK AN EXPERT

D none of these Your answer is Correct

OFFER

EXCLUSIVE OFFER FOR OTS Solution :

STUDENTS ONLY ON BOOK (d)
PACKAGES Representative Fraction (RF) is unitless and dimensionless.

QUESTION ANALYTICS

Q. 2

A map of 10 cm × 8 cm represents an area of 50000 m2 of a field .The Representative Fraction (RF) of the scale is
Have any Doubt ?

A 1/25

B 1/625

C 1/2500 Correct Option

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 1/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Solution :
(c) Subham Bardhan 
(Enroll User) Sign out

D 1/6250000

Subham Bardhan QUESTION ANALYTICS

Course: ESE
Civil Engineering (CE)

Q. 3
HOME
When a cone is cut by planes at different angles, the curves of intersection are called
Have any Doubt ?
MY TEST

A Vertices
BOOKMARKS

MY PROFILE Conic sections Correct Option

B

REPORTS
Solution :
(b)
BUY PACKAGE

ASK AN EXPERT C Ellipse

OFFER
D None of the above
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
QUESTION ANALYTICS

Q. 4

Name the curve which has zero eccentricity

Have any Doubt ?

A ellipse

B parabola

C hyperbola

D circle Your answer is Correct

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 2/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Solution :
(d) Subham Bardhan 
Circle has zero eccentricity. (Enroll User) Sign out

QUESTION ANALYTICS

Q. 5
Subham Bardhan “A curve traced by a point on the circumference of a circle which rolls without slipping along a fixed straight line” is known as
Course: ESE Have any Doubt ?
Civil Engineering (CE)

A Hypocycloid
HOME

B Involute
MY TEST

BOOKMARKS Spiral
C

MY PROFILE
D Cycloid Correct Option
REPORTS

Solution :
BUY PACKAGE (d)

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS

STUDENTS ONLY ON BOOK
PACKAGES

QUESTION ANALYTICS

Q. 6

When a straight line rolls on the circumference of a semicircle the locus of its end point is called
Have any Doubt ?

A Cycloid

B Epicycloid

C Hypocycloid

D Involute Correct Option

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 3/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Subham Bardhan 
Solution :
(Enroll User) Sign out
(d)

QUESTION ANALYTICS

Q. 7
Subham Bardhan
Course: ESE In first angle projection system, the right hand side view of an object is drawn
Civil Engineering (CE) Have any Doubt ?

A above the elevation

HOME

MY TEST B below the elevation

BOOKMARKS
C left of the elevation Correct Option
MY PROFILE
Solution :
REPORTS (c)
In first angle projection system, object lies between the observer and plane of projection. So projection is to the opposite side of the
projected face.
BUY PACKAGE

ASK AN EXPERT right of the elevation

D

OFFER
QUESTION ANALYTICS
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES
Q. 8

A point whose elevation is above xy line may be situated in

Have any Doubt ?

A first quadrant

B second quadrant

C vertical plane

D any of these Correct Option

Solution :
(d)

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 4/13
02/02/2019 MADE EASY ONLINE TEST SERIES

QUESTION ANALYTICS Subham Bardhan 

(Enroll User) Sign out

Q. 9

A line PQ (in first quadrant) of length 50 mm is perpendicular to H.P. and 20 mm in front of V.P. Point ‘P’ is closer to H.P. and 10 mm above
H.P. Which of the  following is correct for line
 
Have any Doubt ?
Subham Bardhan
Course: ESE
A Front view will be a line of the length less than 50 mm
Civil Engineering (CE)

HOME B front view will be a point at 20 mm above reference line

MY TEST
C top view will be a line of the length 50 mm

BOOKMARKS

D front view will be a line of the length 50 mm Correct Option

MY PROFILE

REPORTS Solution :
(d)

BUY PACKAGE

ASK AN EXPERT

OFFER

EXCLUSIVE OFFER FOR OTS

STUDENTS ONLY ON BOOK
PACKAGES

QUESTION ANALYTICS

Q. 10

If the top view of a plane is a rhombus, the object may be

Have any Doubt ?

A a square

B a rhombus

C either (a) or (b) Correct Option

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 5/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Solution : Subham Bardhan 

(c) (Enroll User) Sign out
If a rhombus is parallel to H.P., its top view will be rhombus.
If a square is inclined to H.P., its top view will either be a rectangle or a rhombus.
Therefore, if top view is rhombus, the actual shape can either be a square or a rhombus.

D neither (a) or (b)

Subham Bardhan
Course: ESE QUESTION ANALYTICS
Civil Engineering (CE)

HOME Q. 11

A square pyramid of base 40 mm side and 60 mm height is resting on its base on H.P. such that all the sides of the base are equally inclined
MY TEST
to V.P. Then its
Have any Doubt ?
BOOKMARKS

A top view will be square of side 40 mm Correct Option

MY PROFILE

REPORTS Solution :
(a)
In top view base will be seen in its actual shape as base is parallel to HP (resting on HP).
BUY PACKAGE

ASK AN EXPERT B top view will be a triangle of base 40 mm and height 60 mm

OFFER
C front view will be a square of side 40 mm
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES D front view will be a triangle of base 40 mm and height 60 mm

QUESTION ANALYTICS

Q. 12

A rectangle with 120 mm and 60 mm sides represents the development of the lateral surface of
Have any Doubt ?

A a square prism with 30 mm sides and 60 mm height

B a hexagonal prism with 20 mm sides and 60 mm height

C a cylinder with 120/π diameter and 60 mm height

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 6/13
02/02/2019 MADE EASY ONLINE TEST SERIES

D all of these Correct Option

Subham Bardhan 
(Enroll User) Sign out
Solution :
(d)

QUESTION ANALYTICS

Subham Bardhan Q. 13
Course: ESE
Civil Engineering (CE) Water is used to extinguish
Have any Doubt ?

HOME
A Class A fires Correct Option

MY TEST
Solution :
BOOKMARKS (a)
Water is best suited for extinguishing fire from solid materials of organic nature which are considered in Class-A fires.

MY PROFILE

B Class B fires
REPORTS

BUY PACKAGE C Class C fires

ASK AN EXPERT
D Class D fires

OFFER

EXCLUSIVE OFFER FOR OTS QUESTION ANALYTICS

STUDENTS ONLY ON BOOK
PACKAGES

Q. 14

What is the prime function of an electric fuse?

Have any Doubt ?

A To protect against electric shock

B To reduce electricity costs

C To protect equipment from overload Correct Option

Solution :
(c)

D To ensure that the equipment is properly earthed

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 7/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Subham Bardhan 
QUESTION ANALYTICS
(Enroll User) Sign out

Q. 15

The angle that isometric lines make with each other is

Have any Doubt ?

Subham Bardhan A 45°

Course: ESE
Civil Engineering (CE)
B 60°

HOME

C 120°
MY TEST

BOOKMARKS D 120° and 60° Correct Option

MY PROFILE
Solution :
(d)
REPORTS

BUY PACKAGE QUESTION ANALYTICS

ASK AN EXPERT

Q. 16
OFFER
Select the correct isometric view corresponding to the orthographic views shown
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES

Have any Doubt ?

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 8/13
02/02/2019 MADE EASY ONLINE TEST SERIES

Subham Bardhan 
(Enroll User) Sign out

C Correct Option

Subham Bardhan
Course: ESE
Civil Engineering (CE)

Solution :
HOME (c)

MY TEST
D

BOOKMARKS

MY PROFILE

REPORTS

BUY PACKAGE
QUESTION ANALYTICS

ASK AN EXPERT

OFFER Q. 17

Consider the following statements regarding quality function deployment (QFD).

EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK 1. It is a tool for translating ordinary language used to describe customer needs into engineering language used to set product and process
PACKAGES design parameters.
2. It is a customer requirements planning matrix.
The correct statement(s) is (are):
Have any Doubt ?

A 1 only

B 2 only

C Both 1 and 2 Correct Option

Solution :
(c)

D None of these

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 9/13
02/02/2019 MADE EASY ONLINE TEST SERIES
QUESTION ANALYTICS

Subham Bardhan 
(Enroll User) Sign out

Q. 18

A FMEA team answers:

Have any Doubt ?

A How can this product design or process design fail to do what it is supposed to do.

Subham Bardhan
Course: ESE B What should we do to prevent these potential failures?
Civil Engineering (CE)

C Both (a) and (b) Correct Option

HOME

MY TEST Solution :
(c)
BOOKMARKS

D Neither (a) nor (b)

MY PROFILE

REPORTS
QUESTION ANALYTICS

BUY PACKAGE

ASK AN EXPERT Q. 19

Product cost can be reduced by considering the following aspect(s) at the design stage.
OFFER Have any Doubt ?

EXCLUSIVE OFFER FOR OTS

A Minimum number of operations
STUDENTS ONLY ON BOOK
PACKAGES

B Unnecessary tight tolerance should not be provided.

C Design should consist of standard parts.

D All of the above Correct Option

Solution :
(d)

QUESTION ANALYTICS

Q. 20

On moving further in the design activity:

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 10/13
02/02/2019 MADE EASY ONLINE TEST SERIES

1. More options are available for the design.

2. Lesser options are available for the design. Subham Bardhan 
3. Higher is cost of changes and modifications. (Enroll User) Sign out
4. Lower is cost of changes and modifications.
The correct statements are:
Have any Doubt ?

A 1 and 3

Subham Bardhan B 1 and 4

Course: ESE
Civil Engineering (CE)
C 2 and 3 Correct Option

HOME
Solution :
MY TEST (c)

BOOKMARKS 2 and 4
D

MY PROFILE
QUESTION ANALYTICS
REPORTS

BUY PACKAGE
Q. 21

ASK AN EXPERT The following is indirect cost of accident

Have any Doubt ?
OFFER
A Money paid for treatment of worker
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK
PACKAGES Compensation paid to worker
B

C Cost of lost time of injured worker Correct Option

Solution :
(c)

D All of the above

QUESTION ANALYTICS

Q. 22

The following is (are) physical hazards

Have any Doubt ?
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 11/13
02/02/2019 MADE EASY ONLINE TEST SERIES

A Falls Subham Bardhan 

(Enroll User) Sign out

B Electricity

C Inhalation Correct Option

Solution :
Subham Bardhan (c)
Course: ESE Falls and electricity are safety hazards.
Civil Engineering (CE)

D All of the above

HOME

MY TEST
QUESTION ANALYTICS

BOOKMARKS

MY PROFILE Q. 23

Statement (I): FMEA is also called as listening to the voice of customer.

REPORTS Statement (II): It is basically concerned about finding the possible ways in which the product might fail.
Have any Doubt ?
BUY PACKAGE
A a
ASK AN EXPERT

B b
OFFER

EXCLUSIVE OFFER FOR OTS

C c
STUDENTS ONLY ON BOOK
PACKAGES

D d Correct Option

Solution :
(d)

QUESTION ANALYTICS

Q. 24

Statement (I): The main health and safety legislation in India is the Factories act, 1948.
Statement (II): In India, health and safety laws currently cover only four industry sectors.
Have any Doubt ?

A a

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 12/13
02/02/2019 MADE EASY ONLINE TEST SERIES

B b Correct Option
Subham Bardhan 
(Enroll User) Sign out
Solution :
(b)

C c

Subham Bardhan D d
Course: ESE
Civil Engineering (CE)
QUESTION ANALYTICS

HOME

MY TEST Q. 25

Statement (I): In isometric projections, an object is represented using one view only.
BOOKMARKS
Statement (II): Isometric projections are a type of pictorial projections.
Have any Doubt ?
MY PROFILE
A a Correct Option
REPORTS

Solution :
BUY PACKAGE
(a)

ASK AN EXPERT
B b
OFFER

EXCLUSIVE OFFER FOR OTS C c

STUDENTS ONLY ON BOOK
PACKAGES
D d

QUESTION ANALYTICS

https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=474&t=a&testType=2 13/13