0% found this document useful (0 votes)
865 views2 pages

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M: Electrical Properties

This document provides specifications for a dual-band antenna that operates in frequency ranges between 790-960 MHz and 1710-2690 MHz. The antenna has a gain between 15.8-18.2 dBi, beamwidth between 60-65 degrees, maximum power handling of 500W and 250W for each band, and mechanical properties including dimensions of 1999 x 349 x 166 mm and a weight of 24.0 kg. Accessories including a downtilt kit are also specified.

Uploaded by

yevobim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
865 views2 pages

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M: Electrical Properties

This document provides specifications for a dual-band antenna that operates in frequency ranges between 790-960 MHz and 1710-2690 MHz. The antenna has a gain between 15.8-18.2 dBi, beamwidth between 60-65 degrees, maximum power handling of 500W and 250W for each band, and mechanical properties including dimensions of 1999 x 349 x 166 mm and a weight of 24.0 kg. Accessories including a downtilt kit are also specified.

Uploaded by

yevobim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M

Model: ATR451606v06

Electrical Properties
790 - 960 2 x (1710 - 2690)
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable, each band separately
at mid Tilt 15.9 16.1 16.3 17.5 17.8 18.0 18.2
Gain (dBi)
over all Tilts 15.8 ±0.4 16.0 ±0.4 16.2 ±0.5 17.4 ±0.4 17.6 ±0.5 17.9 ±0.5 18.0 ±0.5
Side lobe suppression for first side
> 17 > 17 > 17 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±1.5 64 ±3.0 62 ±4.1 65 ±4.8 62 ±3.7 60 ±4.3 60 ±4.5
Vertical 3dB beam width (°) 10.1 ±0.4 9.8 ±0.5 9.3 ±0.5 5.8 ±0.3 5.4 ±0.3 4.8 ±0.3 4.3 ±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 18 > 18
Max. power per input (W) 500 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1999 x 349 x 166
Packing dimensions (H x W x D) (mm) 2350 x 415 x 240
Antenna weight (kg) 24.0
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 39.4 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -55 .. +65
Frontal: 705 (at 150 km/h)
Wind load (N) Lateral: 230 (at 150 km/h)
Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 4.3-10 Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2.1 kg 1 (Separate packing)

1
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M
Model: ATR451606v06

57 57 60 106

63

1892
1999
Unit: mm

790 - 960
1710 - 2690 X 1710 - 2690
Left Right
X X
+45° -45°

+45° -45° +45° -45°

4.3-10 (F) 4.3-10 (F) 4.3-10 (F) 4.3-10 (F) 4.3-10 (F) 4.3-10 (F)

Pattern sample for reference

790 - 960 MHz 1710 - 2690 MHz 1710 - 2690 MHz


(Left) (Right)

NOTE

1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2 Issue: 2016-06-01

You might also like