3D Printing Prototyping Services Sample Proposal

Scroll down to read the first part of this sample. When purchased, the complete sample is
16 pages long and is written using these Proposal Pack chapters:

Cover Letter, Title Page, Table of Contents, Introduction, Quote, Project Deliverables,
Prototyping, Materials, Equipment, 3-D Printing, Fabrication, Capabilities, Company
History, Services Provided, Quality Control, Back Page

This sample was created using Proposal Pack Tech #1. In the retail Proposal Pack you get
the entire collection of samples (including this one) plus thousands of editable templates
for creating an unlimited variety of custom proposals and other business documents.

Click here to purchase Proposal Pack Tech #1

The sample below does not include all of the sample’s content. The complete version is
included in every retail Proposal Pack product and must be purchased to see the rest of
the content and to get the editable Word format version.

Read this article for more help - How to Write a Manufacturing Business Proposal
October 16, 20xx

Michel Martin
Vice President, Product Development
AeroNouveau Corporation
591 Avenue Rivière
Laval, Québec H7M 1Z1

Dear Mr. Martin,

Thank you for your request for details about what Pro2Fab Services can do for you.

We are a one-stop shop for innovative companies that want to move quickly from
the initial design phase to the final manufacturing process.

With our array of state-of-the-art 3D printers, our manufacturing facilities and

partners, and our in-house expert engineers and technicians, AeroNouveau
Corporation can move efficiently from design to prototypes to manufacturing with
just one partner, Pro2Fab Services.

We believe you’ll find that our proposal answers most of your questions, and please
take advantage of our extensive website to watch our multiple videos there. We also
invite you to visit our facilities in Detroit to see exactly what we do and how we do it.
We promise that Pro2Fab Services will meet or exceed all of your expectations and
requirements.

In a week, we will call you to set up a meeting. We look forward to partnering with
AeroNouveau Corporation.

Sincerely,

Evan Russo
Vice President
Pro2Fab Services
313-555-8001
[email protected]
www.Pro2Fab.com
 Pro2Fab Services
1005 Pine Boulevard
Detroit, MI 48238

(PH) 313-555-8001
(FX) 313-555-8000
www.Pro2Fab.com

October 16, 20xx

Expert Prototyping and Manufacturing Services Proposed

for AeroNouveau Corporation

Prepared for: Michel Martin

Vice President, Product Development

Prepared by: Evan Russo

Vice President

AeroNouveau Corporation, an innovative aeronautic design

company, wants to find the most efficient partner to help
them move from design to manufacturing.

Pro2Fab Services is that perfect partner, because we offer

3D printing to quickly produce prototypes and limited
production runs, as well as extensive manufacturing
facilities for mass-production of parts.

Our experts are always available to consult with your

engineers.

www.Pro2Fab.com Proposal Number: 15

Introduction ............................................................................................................................ 2
3-D Printing ............................................................................................................................. 3
Materials .................................................................................................................................. 4
Prototyping ............................................................................................................................. 5
Fabrication .............................................................................................................................. 6
Services Provided ................................................................................................................... 8
Equipment ............................................................................................................................. 10
Quality Control ..................................................................................................................... 11
Project Deliverables ............................................................................................................. 13
Quote ..................................................................................................................................... 14
Company History.................................................................................................................. 15
Capabilities ............................................................................................................................ 16

www.Pro2Fab.com
We understand that AeroNouveau Corporation would like to prototype several
options for innovative jet parts that may be used in future models produced by your
company.

Pro2Fab Services is a full-service fabrication company. Utilizing 3D Printing, we can

create quickly multiple prototypes for you at a reasonable cost.

Then, after your prototypes have been thoroughly tested and approved by your
engineers, we can manufacture the final components for you.

We have extensive experience in prototyping, machining, and fabrication services,

and have collaborated with a wide variety of organizations, including both
automotive and aviation companies. Our quality control is exceptional.

Review the pages supplied in this proposal, and we know you’ll agree.

www.Pro2Fab.com
3D printing has made amazing strides in recent years, especially for developing
prototypes for industry.

But did you know that some organizations now use 3D printing to quickly produce
components for specialized devices such as medical equipment, jets, spacecraft, and
automobiles?

Pro2Fab Services has 3D printers that can create objects to exact specifications in a
variety of plastic and metal materials. We offer the full range of 3D printing options,
with SLA, SLS, DMLS, and SLM processes. Please visit www.Pro2Fab.com to see the
photos and descriptions of just a few of our past projects for clients. We have
completed hundreds more projects for customers than are shown on our web site,
but many of our contracts include nondisclosure agreements and thus the projects
cannot be shared.

When you need to produce limited quantities of specialized components, using 3D

printing can speed the manufacturing process and reduce your costs. Need to
replace a part on only one or two jets? Have a special request from just one
customer? When we have your specifications programmed into our 3D machines,
we can quickly fill your orders.

As innovations in 3D printing grow each year, Pro2Fab Services adds new printers
and capabilities. We are dedicated to keeping up with the 3D printing industry, as
well as the manufacturing industry in general.

www.Pro2Fab.com
Pro2Fab Services is experienced in both prototyping and manufacturing final
products using a wide range of materials. For maximum efficiency and quality and
the best pricing, we purchase all materials used in our products from our partner
suppliers. Pro2Fab Services can supply all of the following materials to meet your
needs.

Plastics

Our 3D printers can produce prototypes and limited quantities of manufactured

parts in rigid or flexible polyurethane, elastomeric polyurethane, urethane
methacrylate, epoxy, and cyanate ester. Our experts are always available to
consult with you on appropriate plastics for your components.

Metals

Traditional metal fabrication wastes a tremendous amount of metal, so if you

have less than 1000 components per order, you may want to consider our
exacting 3D printing for finished components as well as prototypes. We have
expertise in using the following metals in our 3D printing process and in mass
production of final components: titanium, aluminum, brass, steel (including
stainless steel), bronze, sterling silver, copper, gold, and platinum.

www.Pro2Fab.com
The traditional method of producing prototypes was time-consuming and
inefficient, often involving elaborate processes to create just a few parts for testing.

While traditional manufacturing methods are still available for producing huge
prototypes, 3D printing has changed the process for smaller parts. And often, entire
products such as cars have been completely perfected through 3D print
prototyping, by breaking down large pieces into smaller ones that can be easily
printed and assembled. These days, creating a prototype can take only a matter of
days instead of months or even years. After the initial component has been created,
modifications can easily be made and improved prototypes produced within a
matter of hours.

Using your 2D blueprints, our experts and our 3D printers can quickly produce a
three-dimensional design which our 3D printing machines can reproduce in a
variety of plastics or metals.

If you want to prototype a new component that is similar to an existing piece, our
machines can also scan the existing piece, precisely creating “slices” that the
machines use to reproduce the original design. After the design of the existing
component is encoded into the printer’s programming, your engineers or our
experts can then make changes to that design for final printing.

Using Pro2Fab Services and our state-of-the-art 3D printers, you’ll find that
prototyping can be simple, fast, and economical, giving you an edge over your
competitors.

www.Pro2Fab.com
Utilizing our own manufacturing facilities and those of our partner companies,
Pro2Fab Services can fabricate almost any sort of metal or plastic component.

Fabrication Issues to Consider

There are several issues to consider when planning for fabrication of a product.
First, and key to keeping costs low, is how many orders of the product will be
placed. When thousands of identical products are not needed, then it may be
more efficient to consider using 3D technologies to produce the product instead
of traditional mass-market manufacturing methods.

Second, what material will be used in the fabrication process? Sheet metal is
best suited for torches or laser cutting, bending, and forming large or sharply
angled metal pieces; while 3D metal printing or metal casting is desirable for
smaller components. For plastics, injection molding, stamping, and 3D printing
are considerations.

Third, how much finishing does the final product require? Metal pieces may
require coatings or polishing or painting. Plastics can be colored or textured, but
may require some finishing as well.

Fabrication Process

The process, of course, depends on the product to be created, but can be

completed by Pro2Fab Services in-house, or by our partners in their facilities.
There will be no need to ship parts to other facilities for finishing or final
assembly.

www.Pro2Fab.com
Fabrication Schedule

Although we are constantly working with hundreds of clients, Pro2Fab Services is

nimble, and we can advise on the most efficient way to produce your products.
Odds are that we can beat any competitor’s promises for completion, saving you
time and allowing you to get your products to market first.

Additional Information

AeroNouveau Corporation has no need to seek out manufacturing experts,

because Pro2Fab Services will supply all the expertise you require. We stand
ready to consult with you about how we can most efficiently realize your
designs.

www.Pro2Fab.com
As previously mentioned in this proposal, Pro2Fab Services is a full-service design,
prototyping, and manufacturing company. We do it all, and under expert quality
control, too. (See the Quality Control page for more on that.) We provide all the
following services:

Product design and consultation services

Whether you need our engineers to completely design a component for your
company, or you need to consult with our experts to determine the most
efficient methods for prototyping and manufacturing, our staff is available to
help.

Efficient and economical prototyping

We offer the most modern prototyping services through 3D printing, using a

variety of plastics and metals. Our 3D printers can scan 2D blueprints to
create a 3D specification, or scan and “slice” an existing 3D piece. After the
initial design is in our computer files, it’s easy to make modifications and
produce updated prototypes for testing.

3D printing for small specialized production runs

When you don’t need thousands of identical products, 3D printing may be

your best solution for limited orders. Both plastic and metal processes are
available, and since there’s not much setup involved after the prototype is
perfected, production can take only days instead of weeks or months.

www.Pro2Fab.com
This sample is included in the Proposal Kit Professional and Proposal Pack
products.

This sample has been truncated to only show the first few pages. The complete
version of this sample including an editable Word version is included with all
Proposal Kit Professional and Proposal Pack products found at:

ProposalKit.com/htm/proposal-software-products.htm

Copyright © Proposal Kit, Inc. All rights reserved.