Scribd
Upload
163 views

GC-NET232-PLUS NET232+ Serial To Ethernet Intelligent Cable Adapter

The NET232+ is an improved serial-to-Ethernet device that connects serial devices to a network. It has enhanced features over the previous NET232 model like support for multiple TCP connections and email alerts. It is easy to configure using installation software to connect a serial device and access it over Ethernet. The NET232+ can tunnel serial data between two units or act as a virtual COM port to integrate serial devices onto a network.

Uploaded by

Jose Moreno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
163 views

GC-NET232-PLUS NET232+ Serial To Ethernet Intelligent Cable Adapter

The NET232+ is an improved serial-to-Ethernet device that connects serial devices to a network. It has enhanced features over the previous NET232 model like support for multiple TCP connections and email alerts. It is easy to configure using installation software to connect a serial device and access it over Ethernet. The NET232+ can tunnel serial data between two units or act as a virtual COM port to integrate serial devices onto a network.

Uploaded by

Jose Moreno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Serial

GC-NET232-PLUS
NET232+ Serial to Ethernet
Intelligent Cable Adapter

Features: Description:
• Web Page Configuration The NET232+ is a part of the next generation of serial device servers from Grid
• Supports 4 TCP Connections Connect. The NET232+ has several improvements over its predecessor the
• LEDs for Power, Status, Ethernet NET232. The new NET232+ has enhanced software features, including support
Link, Activity for multiple TCP connections, DNS support, email authentication, email trigger-
• DTE (male) and DCE (female) ing features, and a Debug Trace feature to troubleshoot the serial connection. In
versions addition, the NET232+ adds a factory reset push button (accessible with a pin or
• Custom versions available• Serial paperclip), a new Status LED, and an updated configuration web page.
rates up to 921K
• Industrial temp rated The NET232+ is simple to configure using the installation software. Just connect
• Power via Wall Supply, USB power the NET232+ to a serial device and to the local Ethernet network and run the
cable, or Terminal Block free software to find and set up the NET232+. The NET232+ can be used in
• 256-bit AES Encryption pairs to “tunnel” serial data between them over the network. It can also be used
• Factory Reset Button as a single device connected to a serial device on one end, and to a direct
• 1 year limited warranty TCP/IP socket interface or as a “virtual COM port”. A virtual COM port can be
accomplished using the free Com Port Redirector software for Windows.

1630 W. Diehl Road, Naperville, IL 60563  Phone: +1 (630) 245-1445  USA Toll Free: +1 (800) 975-4743 gridconnect.com
Specifications:
Security/Protection 256-bit AES Encryption
Software • Device Installer software
• Virtual COM port software
Firmware Upgradeable via TFTP and Serial Port

LEDs Power, Status, Ethernet Link, Activity

Serial Interface • RS232


• DB9 Connector (Male or Female) – custom versions available
• Baud rates up to 921K
• 7 or 8 data bits
• 1 or 2 stop bits
• DTR, DSR modem controls
• Flow Control: XON/XOFF, CTS/RTS, None
Ethernet Interface • 10/100Mbps Autosensing
• RJ45 Connector
• ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP,
BOOTP, TFTP, Auto IP, SMTP, and HTTP

Regulatory RoHS, CE, UL

Dimensions • Housing: 63.5 x 42.67 x 20.17mm (2.5 x 1.58 x 0.794 inches)


• Cable Length (including DB9 connector): 460.375mm (18.125”)
Product Weight 62.4 g (2.2 oz)

Temperature Range • -40 to +85ºC (-40 to +185ºF)


• 5% to 95% non-condensing humidity
Power Requirements • 0.99 Watts
• 5VDC to 30VDC
• Wall supply Option 9VDC – 500ma
• Terminal Block Option (direct DC power)
• Pin 9 – DB9 connector (from serial device)

Contact Us:
GC-NET232-PLUS Ordering Summary
Grid Connect Inc.
GC-NET232-PLUS-DCE-110 DCE (female) 110V - U.S./North America 1630 W. Diehl Road
GC-NET232-PLUS-DCE-220 DCE (female) 220V - Europe (Except U.K.) Naperville, IL 60563
GC-NET232-PLUS-DCE-TB DCE (female) 5-30V Terminal Block
Phone: +1 (630) 245-1445
GC-NET232-PLUS-DTE-110 DTE (male) 110V - U.S./North America USA Toll Free: +1 (800) 975-4743
GC-NET232-PLUS-DTE-220 DTE (male) 220V - Europe (Except U.K.) Fax: +1 (630) 245-1717
GC-NET232-PLUS-DTE-TB DTE (male) 5-30V Terminal Block Email: [email protected]
Website: gridconnect.com
Call for Volume Pricing

You might also like