ENEOS DIESEL 10W40 CI-4
SEMI-SYNTHETIC DIESEL ENGINE OIL
Material Code: EMA1602
ENEOS DIESEL 10W40 CI-4 Semi-Synthetic Diesel Engine Oil is extra high performance Heavy- Duty
Diesel Engine Oil specially developed for modern high performance diesel engines used in severe applications.
Formulated with high performance synthetic base stock and advanced additives to provide effective lubrication
and “Extra Long Drain” intervals. This product is designed to use in most demanding heavy duty diesel engines
meeting EURO IV emission standards.
❖ SPECIAL FEATURES. ❖ PERFORMANCE LEVEL.
1. Outstanding deposit control for cleaner engine and API-CI-4,
there by reduced maintenance cost. ACEA E7/E4, Mack EO-M Plus
2. Superior protection against bore polishing ensures Cummins CES 20077/78, DAF Extended Drains
longer engine life. MAN M 3277, MB- Approval 228.5
3. Extended TBN reserve enables prolonged drain Volvo VDS-3, Renault Trucks RXD/RLD-2,
interval capability. Mack EO-N approval
4. High Viscosity index facilitates smooth operation
Scania LDF-2, MTU Oil Category 3
over a wide temperature range.
5. Low volatility of synthetic fluids reduces oil
evaporation.
6. High shear stability ensures viscosity control, wear ❖ TYPICAL PROPERTIES
protection and lower oil consumption.
7. Excellent detergency provides protection against high SAE Viscosity Grade 10W-40
temperature deposit. Quality Grade CI-4
Density (15°C), g/cm³ 0.874
Flash Point (COC), °C 214
❖ APPLICATIONS.
Kinematic Viscosity (100°C),mm²/s 14.58
1. Recommended for use in all low emission turbo Viscosity Index 154
charged and naturally aspirated heavy-duty diesel Pour Point, °C -30
engines meeting EURO IV emission standards TBN (HCL), mg KOH/g 12.7
manufactured by European, North American and Sulphated Ash, wt.% 1.7
Japanese manufacturers requiring such quality Oils.
Note: The Typical Properties may be changed without notice.
2. Suitable for on road applications including light and
heavy duty highway and city applications, high speed
diesel engines, mining, construction, agriculture and
other off road applications.
❖ PACK SIZE.
208L
Handling
Precautions ▼ Follow these precautions when handling this product.
Classification of the
Not a dangerous preparation according to 1999/45/EC.
substance or preparation :
Most important adverse : No adverse hazards.
Most important adverse
None under normal conditions.
human health effects :
Precautionary Statements : No naked lights. No smoking. Keep away from sources of ignition.
PreventionHandle in accordance with good industrial hygiene and safety procedures.
After inhalation : Assure fresh air breathing. Obtain medical attention if breathing difficulty
persists.
After contact with skin : Remove affected clothing and wash all exposed skin area with mild soap
and water, followed by warm water rinse. Seek medical attention if irritation
develops.
Response
After contact with eyes : Rinse immediately with plenty of water. Seek medical attention if irritation
develops.
After ingestion : DO NOT INDUCE VOMITING. Seek medical attention immediately.
Other Information : If there is any suspicion of aspiration into the lungs either directly or as a result
of vomiting, obtain medical advice.
Keep container closed when not in use. Keep at temperature not exceeding 45°C.
Storage
Keep only in the original container in a cool, well ventilated place.
Waste disposal : Dispose in a safe manner in accordance with local/national regulations.
Waste-disposal procedures : See Directive 2001/118/EC
Industrial waste number (EURAL) : 13 02 06 - Synthetic engine, gear and lubricating oils.
Disposal Contaminated packaging : Do not attempt to refill or clean containers without proper instructions. Do
not cut , pressurise, weld, braze, solder, drill, grind or expose such
containers to the heat, flame, sparks, static electricity or other sources of
ignition. They may explode and cause injury or death.
