Libyana Network Cluster 5

Optimization Analysis Summary

Report

2020-04-28
 Contents
1. Network................................................................................................................................. 3
1.1 2G DT Road..................................................................................................................... 3
1.2 2G DT KPI....................................................................................................................... 4
1.3 2G CS/PS Traffic............................................................................................................ 5
1.4 3G DT Road..................................................................................................................... 5
1.5 3G DT KPI....................................................................................................................... 8
1.6 3G CS/PS Traffic............................................................................................................ 8
1.7 4G DT Road..................................................................................................................... 9
1.8 4G DT KPI...................................................................................................................... 11
2. 2G DT Case Analysis............................................................................................................ 12
2.1 DT Case Status Statistics....................................................................................... 12
2.2 DT Case Handle...................................................................................................... 12
2.2.1 Weak Coverage................................................................................................. 12
2.2.2 Bad Rxqual....................................................................................................... 24
3. 2G System Performance...................................................................................................... 28
3.1 RU Diversity Reception Abnormal...........................................................................28
3.2 External interference............................................................................................... 28
3.3 1800M Coverage..................................................................................................... 29
4. 3G DT Case Analysis............................................................................................................ 30
4.1 DT Case Status Statistics............................................................................................ 30
4.2 DT Case Handle...................................................................................................... 30
4.2.1 Weak Coverage................................................................................................. 30
4.2.2 Bad Ec/No........................................................................................................ 41
4.2.3 Low Speed........................................................................................................ 47
5. 3G System Performance...................................................................................................... 53
6. 4G DT Case Analysis............................................................................................................ 53
6.1 DT Case Status Statistics....................................................................................... 53
6.2 DT Case Handle...................................................................................................... 53
6.2.1 Weak Coverage................................................................................................. 54
6.2.2 Bad SINR.......................................................................................................... 74
4.2.4 Low Speed........................................................................................................ 84
7. 4G System Performance...................................................................................................... 93
8. Remain Issue....................................................................................................................... 94
1. Network

1.1 2G DT Road
 PRE 2G RxLev (Rxlev>=-75dBm:84.57%; Rxlev>=-85dBm:98.23%)

 POST 2G (Rxlev>=-75dBm: 92.93%; Rxlev>=-85dBm: 98.96%)

 PRE 2G RxQual (0~3)-94.06%

 POST 2G RxQual (0~3): 96.07%

1.2 2G DT KPI

Hand
Cal Hand hand
Call Drop over
Clust RxLev(>=- RxLev(>=- RxQual( CSS l DC over over
atte ped Succe
er5　 75dBm) 85dBm) 0~3) R set R attem succe
mpt call ss
up pt ss
Rate
98.7 1.0 99.49
PRE 84.57% 98.23% 94.06% 95 93 1 389 387
4% 5% %
POS 98.8 10 0.0 99.51
92.93% 98.96% 96.07% 103 0 408 406
T 8% 3 0% %
After antenna adjustment and optimization, the RxLev(>=-75dBm) improve 7%, RxLev(>=-85dBm)
improve 0.73%, RxQual (0~3) improve 2.01%.

1.3 2G CS/PS Traffic

1.4 3G DT Road
 PRE 3G RSCP (>-86dBm): 93.05%
 POST 3G RSCP(>-86dBm): 96.23%

 PRE 3G EC/IO(>-10dB): 66.58%

 POST 3G EC/IO(>-10dB): 66.55%

 PRE 3G Throughput(Throughput>2000kbps): 74.11%

 Post 3G Throughput(Throughput>2000kbps): 75.47%

1.5 3G DT KPI

Cl RSC RSC EC/I EC/I Throug CS Call Cal Handov Hand hand Drop Dro Thr
us P>- P>- O>- O>- hput>2 SR atte l er over over ped ppe oug
 hpu
ter 90d 86d 12d 10d 000kbp set success attem succe call d t
mpt
5　 Bm Bm B B s up rate pt ss rate call (Mb
it/s)
99
PR 99.4 93.0 86.5 66.5 .4 100.00 0.00
74.11% 93 93 1139 1139 0 5.72
E 0% 5% 7% 8% 3 % %
%

99
PO 100. 96.2 88.5 66.5 .5 10 100.00 0.00
75.47% 100 1256 1256 0 5.51
ST 00% 3% 4% 5% 5 0 % %
%

After antenna adjustment and optimization, the RSCP>-86dBm improve 3.2%,

Throughput>2000kbps improve1.36%.

1.6 3G CS/PS Traffic

1.7 4G DT Road
 PRE 4G RSRP (RSRP>=-95dBm:69.42%; RSRP>=-105dBm:91.28%)

 POST 4G RSRP (RSRP>=-95dBm: 73.43%; RSRP>=-105dBm: 94.78%)

 PRE 4G SINR (SINR>=5dB:71.58%; SINR>=0dB:89.33%)

 POST 4G SINR (SINR>=5dB: 76.4%; SINR>=0dB: 92.14%) %

 PRE DL Throughput (Arithmetic Mean 21.3Mbps)

 POST DL Throughput (Arithmetic Mean 24.83Mbps)

1.8 4G DT KPI

LTE Coverage(RSRP Average Avg Handover RRC

Average
Cluster5　 >-110 & SINR >-3 RSRP Throughput success Establishment
SINR(dB)
Samples) (dBm) (Mbit/s) rate success rate %

PRE 93.56% -90.12 9.89 21.3 100% 100%

POST 95.87% -89.37 10.36 24.83 100% 100%
After antenna adjustment and optimization, the LTE Coverage improve 2.31%, Average RSRP
improve 0.75dBm, Average SINR improve 0.47dB, Throughput improve 3.53Mbit/s.

2. 2G DT Case Analysis

2.1 DT Case Status Statistics

DT cases handling overview:
 Case Name Closed Open Total
Weak Coverage 6 6
Bad RxQual 2 2

2.2 DT Case Handle

2.2.1Weak Coverage

2.2.1.1 TRI101D-3 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227083336

At occupied TRI101D-3 and set up a call, TRI101D-3 RxLev and RxQual were good.

When the car was moving, the RxLev of TRI101D-3 became worse and worse.
 After TRI101D-3 handover to TRI203D-1, but TRI203D-3 is better. not using it

After TRI203D-1 handover to TRI203-3, RxLev and RxQual were good

Description of the case:

MS moved from east to west, it occupied TRI101D-3 and set up a call. When the car was moving,
the RxLev of TRI101D-3 became worse and worse.
Analysis of the case:
According to DT result, this area should be covered by TRI101D-3 and TRI203D-3. TRI203D-
3 Better than it, but it was not used in time. So it’s handover not timely lead to bad signal in
this area. We want the TRI203D-3 coverage in the road.
Solution:
We will modify the parameter optimize and adjust tile this area:
1. Adjust TRI101D-3 to TRI203D-3 HoMarginPbgt 30-28
Action:
1. Adjust TRI101D-3 to TRI203D-3 HoMarginPbgt 30-28
Test after optimization：
2.2.1.2 TRI483D-1 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227083336

At occupied TRI877D-3 and set up a call, TRI877D-3 RxLev and RxQual were good.

When the car was moving, handover to TRI103D-3,the RxLev became bad.
 When the car was moving, the RxLev and Rxqual of TRI483D-1 became worse and worse.

Description of the case:

MS moved from south to north, it occupied TRI877D-3 and set up a call. When the car was
moving, handover to TRI483D-1, the RxLev and Rxqual of TRI483D-1 became worse and worse.
Analysis of the case:
According to DT result, this area should be covered by TRI877D-3，so need put up tilt to
enhance this area coverage.
Solution:
1. Adjust the antenna tilt for TRI877D-3 from 3° to 1°, the antenna azimuth from 55° to 50°.
Action:
1. Adjust the antenna tilt for TRI877D-3 from 3° to 1°, the antenna azimuth from 55° to 50°.
Test after optimization：
2.2.1.3 TRI184D-2 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227090758

At occupied TRI143D-1 and set up a call, TRI143D-1 the RxLev and RxQual were good.
 When the car was moving, handover to TRI143-1 RxLev and RxQual became worse and worse.

Handover to TRI184D-2 RxLev and RxQual became worse and worse.

After the handover to TRI184D-3, the TRI184D-3 RxQual and RxLev were good.

Description of the case:

MS moved from south to north, it occupied TRI143D-1 and set up a call. At the beginning it was
normal, when the car was moving, the RxLev and RxQual became worse and worse, handover to
TRI184D-2 RxLev and RxQual became worse and worse.
Analysis of the case:
According to DT result, this area should be covered by TRI143D-1 and TRI184D-2，so need
put up tilt to enhance this area coverage.
Solution:
We will modify the parameter optimize this area:
1. Adjust the antenna tilt for TRI184D-2 from 2° to 1°, the antenna azimuth from 135° to
155°.
2. Adjust the antenna tilt for TRI143D-1 from -4° to 0°. the antenna azimuth from 0° to 15°.
Action:
1. Adjust the antenna tilt for TRI184D-2 from 2° to 1°, the antenna azimuth from 135° to
155°.
2. Adjust the antenna tilt for TRI143D-1 from -4° to 0°. the antenna azimuth from 0° to 15°.
Test after optimization：
2.2.1.4 TRI032D-2 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227090758

At occupied TRI032D-2 and set up a call, TRI032D-2 the RxLev and RxQual were good.
When the car was moving, exception handover to TRI032D-3 RxLev and RxQual became worse and worse. And finally handover to

TRI032-2

End of the call. when the idle state,TRI032D-2 RxLev was bad.

Description of the case:

MS moved from west to east, it occupied TRI032D-2 and set up a call. At the beginning it was
normal. When the car was moving, RxLev became worse and worse.
Analysis of the case:
According to DT result, we found the current location in the figure should not covered by
TRI032D-3. That sector serving for the reverse side lead to weak coverage. This area should
be covered by TRI032D-2，so need put up tilt to enhance this area coverage
Solution:
We will modify the parameter optimize this area:
1. First healthy check and environment check for TRI032
2. If solution”1” is no, then adjust TRI032D-2/ TRI032D-3 to TRI028-2 NCellLayer 2-1。
3. Adjust the antenna tilt for TRI032D-2 from 1° to 3°.
Action:
1. If solution”1” is no, then adjust TRI032D-2/ TRI032D-3 to TRI028-2 NCellLayer 2-1。
2. Adjust the antenna tilt for TRI032D-2 from 1° to 3°.
Test after optimization：
2.2.1.5 TRI268D-3 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227090758

At occupied TRI268-1 and set up a call, when the car was moving. RxLev and RxQual became worse and worse

After the handover to TRI268D-3, TRI268D-3 RxLev and RxQual became worse and worse.
 After three secondsthe TRI268D-3 handover to TRI268-3, due to the bad signal, the call dropped.

Description of the case:

MS moved from east to west, it occupied TRI268-1 and set up a call, when the car was moving.
RxLev and RxQual became worse and worse. Due to the bad signal, the call dropped.
Analysis of the case:
According to DT result, there overall coverage is very weak and the dense houses blocked the
signals lead to weak coverage We're trying to improve the situation here by optimizing
TRI169D-2 and TRI629D-3.
Solution:
We will modify the parameter optimize this area:
1. TRI268-1 to TRI169-2 RxLevMin 24-15。
2. Adjust the antenna tilt of TRI169D-2 to 0°.
3. Adjust the antenna tilt for TRI629D-3 from 3° to 0°. antenna azimuth from 250° to 220°.
Action:
1. TRI268-1 to TRI169-2 RxLevMin 24-15。
2. Adjust the antenna tilt of TRI169D-2 to 0°.
3. Adjust the antenna tilt for TRI629D-3 from 4° to 1°. antenna azimuth from 240° to 220°.

Test after optimization：

2.2.1.6 TRI169D-1 Weak Coverage

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227090758

At occupied TRI169D-1 and set up a call, RxLev and RxQual were good.

when the car was moving, RxLev and RxQual became worse and worse.
 After the TRI169D-1 handover to TRI291-2, RxLev and RxQual were good.

Description of the case:

MS moved from south to north, it occupied TRI169D-1 and set up a call, when the car was
moving. RxLev and RxQual became worse and worse. After the TRI169D-1 handover to TRI291-2,
RxLev and RxQual were good.
Analysis of the case:
According to DT result, this area we found TRI 169D-1 RxLev was weak coverage in this area.
TRI291-2 Better than it, but it was not used in time. So it’s handover not timely lead to bad
signal in this area. We want the TRI291-2 coverage in the road.
Solution:
We will modify the parameter optimize and adjust tile this area:
1. Modify TRI169D-1 to TRI291-2 HoUILevThs 7-15, HoDILevThs 15-22.
2. Add P1800 frequency band cell device to the original TRI291.
Action:
1. Modify TRI169D-1 to TRI291-2 HoUILevThs 7-15, HoDILevThs 15-22.
Test after optimization：
2.2.2Bad Rxqual

2.2.2.1 TRI714D-1 Bad Rxqual

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227111015

At occupied TRI030D-2 and set up a call, TRI030D-2 RxLev and RxQual were good.
 when the car was moving, handover to TRI714D-1, Rxqual became worse and worse.

Handover to TRI140D-3, Rxqual was good.

Description of the case:

MS moved from west to east, it occupied TRI030D-2 and set up a call. when the car was moving,
handover to TRI714D-1, Rxqual became worse and worse.
Analysis of the case:
According to DT result, this area should be covered by TRI030D-2 and TRI140D-3. TRI140D-
3 Better than it, but it was not used in time. So it’s handover not timely lead to bad signal in
this area. We want the TRI140D-3 coverage in the road.
Solution:
We will modify the parameter optimize and adjust tile this area:
1. Modify TRI714D-1 to TRI140D-3 HoMarginPbgt 28-26.
2. Adjust the antenna tilt of TRI140D-3 to 0°.
Action:
1. Modify TRI714D-1 to TRI140D-3 HoMarginPbgt 28-26.
2. Adjust the antenna tilt of TRI140D-3 from 6° to 3°.
Test after optimization：
2.2.2.2 TRI483D-1 Bad Rxqual

Log Name: 2G_TRI_CS_MS1_LONG CALL_CLUSTER 5_0227083336

Because TRI483D-1it’s handover not timely lead to bad signal in this area

Description of the case:

Please refer to ‘2.2.1.2 TRI483D-1Weak Coverage’.
Analysis of the case:
Please refer to ‘2.2.1.2 TRI483D-1Weak Coverage’.
Test after optimization：
3. 2G System Performance

3.1 RU Diversity Reception Abnormal

BSCID SiteName CellName RU Diversity Reception Abnormal Action

11 TRI203 TRI203-3 54.2441 Need FM team check reverse

11 TRI009 TRI009-3 25.3268 Need FM team check reverse

11 TRI140 TRI140-1 13.7560 Need FM team check reverse

3.2 External interference

32 cells external interference in cluster 5, 13 cells found the interference source, and 19 cells
need to scan.
SDCCH with TCH with
interference interference Interference Source Current
Cell Name band(4-5)% band(4-5)% Status Lat Lon
TRI009-1 98.49% 99.06% Find the interference source 32.87875 13.138567
TRI009-2 99.97% 99.28% Find the interference source 32.87345 13.1400683
TRI009-3 36.40% 98.56% Need to scan 　 　
TRI031-3 16.16% 10.16% Need to scan 　 　
TRI036-1 13.68% 52.25% Find the interference source 32.864663 13.119805
TRI036-2 56.11% 55.92% Need to scan 　 　
TRI090-1 27.52% 30.14% Need to scan 　 　
TRI090-2 76.46% 60.92% Need to scan 　 　
TRI090-3 100.00% 100.00% Find the interference source 32.87345 13.1400683
TRI097-1 25.45% 59.91% Find the interference source 32.852441 13.062927
TRI102-2 27.67% 26.55% Need to scan 　 　
TRI140-1 15.56% 49.95% Find the interference source 32.87345 13.1400683
TRI140-2 99.80% 99.69% Need to scan 　 　
TRI140-3 100.00% 100.00% Need to scan 　 　
TRI184-2 78.52% 84.84% Need to scan 　 　
TRI184-3 97.60% 97.02% Need to scan 　 　
TRI203-3 24.37% 34.32% Find the interference source 32.869926 13.11831
TRI425-3 99.85% 99.34% Find the interference source 32.856824 13.071086
TRI623-2 56.32% 41.02% Find the interference source 32.862847 13.099138
TRI627-3 86.25% 92.18% Find the interference source 32.85408 13.08487
TRI715-2 99.99% 100.00% Find the interference source 32.873983 13.13179
TRI922-1 99.44% 85.82% Need to scan 　 　
TRI922-2 100.00% 100.00% Find the interference source 32.877628 13.146845
TRI922-3 100.00% 99.51% Find the interference source 32.878377 13.143867
TRI922D-2 51.43% 94.20% Need to scan 　 　
TRI032-2 37.49% 25.97% Need to scan 　 　
TRI052-1 28.12% 29.78% Need to scan 　 　
TRI242-2 21.98% 44.66% Need to scan 　 　
TRI627-2 22.20% 22.34% Need to scan 　 　
TRI633-2 18.09% 38.36% Need to scan 　 　
TRI719-1 17.26% 19.87% Need to scan 　 　
TRI719-2 15.78% 27.73% Need to scan 　 　
3.3 1800M Coverage

From frequency band serving plot we can check that 1800M has non-continuous serving.
TRI028/ TRI161/TRI291/ TRI633 is single band site so that is no 1800M serving, propose add
1800M for site TRI291D.
Site name Configuration longitude Latitude Antenna Azimuth Antenna Tilt

TRI028D S4/4/4 13.0823 32.8428 90/230/0 S4/4/4

TRI161D S4/4/4 13.0863 32.8463 350/130/240 S4/4/4

TRI291D S4/4/4 13.0616 32.8469 0/130/240 S4/4/4

TRI633D S4/4/4 13.0739 32.8503 1/150/250 S4/4/4

TRI155D-2 S4 13.093 32.8386 300 4

4. 3G DT Case Analysis

4.1 DT Case Status Statistics

Case Name Closed Open Total

Weak Coverage 6 6
 Bad Ec/No 4 4
Low Speed 3 3

4.2 DT Case Handle

4.2.1Weak Coverage

4.2.1.1 TRI009W-3 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227105416

MS occupaied the TRI009W-3 RSCP and Ec/No were good.

When the car was moving, the RSCP became worse and worse.
 There were main cell coverage that was weak, No strongest signal.

Description of the case:

MS move from west to east, it occupied TRI009W-3, RSCP was about -85dBm and Ec/No was
about -7dB. At the beginning it was normal. When the car was moving, the RSCP and Ec/No of
TRI009W-3 became worse.
Analysis of the case:
According the DT result, there are no strong signals in this area . TRI009W is the nearest site, this
area should be covered by TRI009W-3，so need put up tilt to enhance this area coverage.
Solution:
1. Adjust the antenna azimuth for TRI009W-3 from 210° to 220°, antenna tilt to 2°.
Action:
1. Adjust the antenna azimuth for TRI009W-3 from 210° to 220°, antenna tilt to 0°.
Test after optimization：

4.2.1.2 TRI030W-4 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227103506

 MS occupaied the TRI030W-4 RSCP and Ec/No were good.

When the car was moving, the RSCP and Ec/No became worse and worse.

There were no main cell coverage ,we want TRI175W-4 to cover this area.

Description of the case:

MS move from north to south, it occupied TRI030W-4, RSCP was about -86dBm and Ec/No was
about -13.5dB. When the car was moving, the RSCP and Ec/No became worse and worse.
Analysis of the case:
According the DT result, there were many neighbor cells. The Ec/No and RSCP weak coverage,
this area was previously covered by the TRI093W, After the TRI093W is removed, 3G signal
gets worse nearby. we need to enhance TRI030W-4 to cover this area.
Solution:
1. Adjust the antenna azimuth for TRI030W-4 from 25° to 45°.
2. Adjust the antenna tilt for TRI030W-4 from 4° to 2°.
3. Restore the original TRI093. (LON: 13.13284°, LAT: 32.8721°).

Action:
1. Adjust the antenna azimuth for TRI030W-4 from 25° to 45°.
2. Adjust the antenna tilt for TRI030W-4 from 4° to 1°.
Test after optimization：
4.2.1.3 TRI877W-3 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227083339

There of occupied sites TRI877W-3\TRI623W-3 Ec/No and Rscp all weak

There were no main cell coverage ,we want TRI877W-3 to cover this area

Description of the case:

MS move from north to south, it occupied TRI877W-3, RSCP was about -96dBm and Ec/No was
about -13.5dB. When the car was moving, the RSCP and Ec/No of TRI877W-3 and TRI623W-3
became worse.
Analysis of the case:
According the DT result, there were many neighbor cells, The Ec/No and RSCP weak coverage, we
need to enhance TRI877W-3 to cover this area.
Solution:
1. Adjust the antenna tilt for TRI877W-3 from 3° to 1°, the antenna azimuth from 55° to 50°.
Action:
1. Adjust the antenna tilt for TRI877W-3 from 3° to 1°, the antenna azimuth from 55° to 50°.
Test after optimization：
4.2.1.4 TRI425W-3 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227083339

There of occupied site TRI097W-3, Ec/No and RSCP all good.

When the car was moving, after TRI097W-3 handover to TRI425W-3/TRI184W-3 RSCP became worse and worse.
 There were no main cell coverage ,we want TRI425W-3 to cover this area.

Description of the case:

MS move from west to east, it occupied TRI097W-3, RSCP was about -90dBm and Ec/No was
about -7dB. When the car was moving, after TRI097W-3 handover to TRI425W-3/TRI184W-3
RSCP became worse and worse.
Analysis of the case:
According the DT result, there were many neighbor cells, The Ec/No and RSCP weak coverage, we
need to enhance TRI425W-3 to cover this area.
Solution:
1. Adjust the antenna tilt for TRI425W-3 from 6° to 2°, the antenna azimuth from 260° to 270°.
Action:
1. Adjust the antenna tilt for TRI425W-3 from 4° to 0°, the antenna azimuth from 310° to 270°.
Test after optimization：

4.2.1.5 TRI032W-3 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227093422

 There of occupied site TRI032W-3, Ec/No and RSCP all good.

When the car was moving, RSCP and ECNO became worse and worse.

TRI169W-1 Better than it, but it was not used in time. So it’s handover not timely lead to bad signal in this area.

Description of the case:

MS move from west to east, it occupied TRI032W-3, RSCP was about -80dBm and Ec/No was
about -7dB. When the car was moving, ECNO and RSCP became worse and worse.
Analysis of the case:
According the DT result, both RSCP and ECNO were both getting bad. TRI169W-1 Better than it,
but it was not used in time. So it’s handover not timely lead to bad signal in this area. We want the
TRI169W-1 and TRI032W-3 coverage in the road.
Solution:
1. Adjust the antenna tilt for TRI032W-3 from 6° to 2°.
2. Adjust the antenna tilt for TRI169W-1 from 6° to 4°.
3. Check the TRI032W-3, TRI169W-1, handover relationship between, modify handover
parameters, reduce handover delay.
Action:
1. Adjust the antenna tilt for TRI169W-1 from 6° to 1°.
2. Adjust the antenna tilt for TRI032W-3 from 6° to 2°.
Test after optimization：

4.2.1.6 TRI169W-2 Weak Coverage

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227093422

There of occupied site TRI268W-2, Ec/No and RSCP all good.

 When the car was moving, RSCP and ECNO became worse and worse.

After handover to TRI169W-2 RSCP was bad.

There were no main cell coverage ,we want TRI169W-2 to cover this area

Description of the case:

MS move from east to west, it occupied TRI268W-2, RSCP was about -85dBm and Ec/No was
about -10dB. When the car was moving, ECNO and RSCP became worse and worse. After
handover to TRI169W-2, RSCP was bad.
Analysis of the case:
According the DT result, there were many neighbor cells. The RSCP weak coverage, we need to
enhance TRI169W-2 to cover this area.
Solution:
1. Adjust the antenna tilt for TRI169W-2 from 2° to 0°, the antenna azimuth to 120°.
Action:
1. Adjust the antenna tilt for TRI169W-2 from 1° to 0°, the antenna azimuth to 120°.
2. Adjust the antenna tilt for TRI629W-3 to 0°
Test after optimization：

4.2.2Bad Ec/No

4.2.2.1 TRI202W-1 Bad Ec/No

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227105416

There of occupied site TRI202W-1 Ec/No was good.

 When the car was moving, the Ec/No became worse and worse.

There were main cell coverage that was weak, No strongest signal.

Description of the case:

MS move from north to south, it occupied TRI202W-1, RSCP was about -84dBm and Ec/No was
about -10dB. When the car was moving, Ec/No became worse and worse.
Analysis of the case:
According the DT result, there were many neighbor cells. The Ec/No was bad. We need to
enhance TRI202W-1 to cover this area.
Solution:
1. Adjust the antenna azimuth for TRI202W-1 from 350° to 25°.
2. Adjust the antenna tilt for TRI202W-1 from 3° to 1°.
Action:
1. Adjust the antenna azimuth for TRI202W-1 from 350° to 25°.
2. Adjust the antenna tilt for TRI202W-1 from 5° to 2°.
Test after optimization：
4.2.2.2 TRI036W-4 Bad Ec/No

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227114416

There of occupied site TRI241W-4 ,Ec/No was good.

 When the car was moving, there of occupied site TRI036W-4\TRI052W-6\TRI036W-6, Ec/No became worse and worse

Overlapping coverage, pilot pollution is formed.

Description of the case:

MS moved from west to east, it occupied TRI085W-4, RSCP was about -63dBm and Ec/No was
-10dB.
Analysis of the case:
According to the DT result, the TRI036W-4\TRI052W-6\TRI036W-6 was Overlapping coverage to
this road. We want TRI036W-4 to cover this area.
Solution:
1. Adjust the antenna tilt for TRI203W-2 from 3°to 4°.
2. Adjust the antenna tilt for TRI052W-3 from 0°to 3°, antenna azimuth 300° to 310°.
3. Adjust the antenna tilt for TRI036W-3 to 5°.
Action:
1. Adjust the antenna tilt for TRI203W-2 from 3°to 4°.
2. Adjust the antenna tilt for TRI052W-3 from 0°to 5°.
3. Adjust the antenna tilt for TRI036W-3 to 5°.
Test after optimization：
4.2.2.3 TRI184W-5 Bad Ec/No

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227114416

There of occupied site TRI184W-5 ,Ec/No was good.

When the car was moving, there of occupied site TRI184W-5\TRI627W-6\TRI103W-5, Ec/No became worse and worse.

Overlapping coverage, pilot pollution is formed.

Description of the case:
MS moved from west to east, it occupied TRI184W-5, RSCP was about -77dBm and Ec/No was
-11.5dB.
Analysis of the case:
According to the DT result, the TRI184W-5\TRI627W-6\TRI103W-5 was Overlapping coverage to
this road. We want TRI627W-6 to cover this area.
Solution:
1. Adjust the antenna tilt for TRI161W-6 from 0°to 2°.
2. Adjust the antenna tilt for TRI627W-3 from 1°to 0°.
3. Adjust the antenna azimuth for TRI184W-5 from 135°to 155°.
Action:
1. Adjust the antenna tilt for TRI161W-6 from 0°to 2°.
2. Adjust the antenna azimuth for TRI184W-5 from 135°to 155°.
Test after optimization：

4.2.2.4 TRI032W-3 Bad Ec/No

Log Name: 3G_TRI_CS_MS2_LONG CALL_CLUSTER 5_0227093422

 TRI169W-1 Better than it, but it was not used in time. So it’s handover not timely lead to bad signal in this area

Description of the case:

Please refer to ‘4.2.1.5 TRI032W-3Weak Coverage’.
Analysis of the case:
Please refer to ‘4.2.1.5 TRI032W-3Weak Coverage’.
Action:
Please refer to ‘4.2.1.5 TRI032W-3Weak Coverage’.
Test after optimization：

4.2.3Low Speed

4.2.3.1 TRI203W-3 Low Speed

Log Name: 3G_TRI_PS_MS7_HSDPA_CLUSTER 5_0302081617

 MS occupaied the TRI203W-3, Download speed 3.8 Mbit/s, ti is very good.

When the car was moving, the Ec/No and Download speed became worse and worse.

TRI102W-1 signal was not used, we found the current location in the figure should not covered by TRI202W-2.
Description of the case:
MS move from east to west, it occupied TRI203W-3, RSCP was about -70dBm and Ec/No was
about -9.9dB. Download speed 3.8 Mbit/s. When the car was moving, the Download speed and
Ec/No became worse and worse.
Analysis of the case:
According the DT result, this area should be covered by TRI102W-1 ， so need put up tilt to
enhance this area coverage.
Solution:
1. Adjust the Down tilt of TRI102W-1 from 9° to 4°.
2. Adjust the Down tilt of TRI203W-3 from 2° to 4°.
3. Adjust the Down tilt of TRI202W-2 to 7°.
Action:
1. Adjust the Down tilt of TRI102W-1 from 9° to 5°.
2. Adjust the Down tilt of TRI203W-3 from 2° to 4°.
3. Adjust the Down tilt of TRI202W-2 from 5° to 7°.
Test after optimization：
4.2.3.2 TRI030W-2 Low Speed

Log Name: 3G_TRI_PS_MS7_HSDPA_CLUSTER 5_0302105915

MS occupaied the TRI030W-2, Download speed 1.2 Mbit/s, When the car was moving , Download speed became worse and

worse.

When the car was moving, there of occupied site TRI030W-2\TRI095W-1\TRI714W-3, Ec/No and download speed became

worse and worse.

Description of the case:

MS move from west to east, it occupied TRI030W-2, RSCP was about -66dBm and Ec/No was
about -10dB. Download speed 1.2 Mbit/s. When the car was moving, the Download speed and
Ec/No became worse and worse.
Analysis of the case:
According the DT result, there is no mainly coverage cell lead to pilot pollution, final lead to bad
Ec/No and low Speed. this area should be covered by TRI030W-2，so need put up tilt to enhance
this area coverage
Solution:
1. Adjust the azimuth of TRI030W-2 from 190° to 155°, the Down tilt from 5° to 3°.
2. Adjust the azimuth of TRI140W-3 from 240° to 260°, the Down tilt from 6° to 3°.
Action:
1. Adjust the azimuth of TRI030W-2 from 190° to 155°, the Down tilt from 5° to 3°.
2. Adjust the azimuth of TRI140W-3 from 240° to 260°, the Down tilt from 6° to 3°.
Test after optimization：

4.2.3.3 TRI030W-1 Low Speed

Log Name: 3G_TRI_PS_MS7_HSDPA_CLUSTER 5_0302094428

MS occupaied the TRI030W-1, Download speed 4.9 Mbit/s, When the car was moving , Download speed,RSCP, Ec/No became

worse and worse.

 There is no strong signal. all the signals are about below -90dbm lead to weak coverage and bad Ec/No,low speed.

Description of the case:

MS move from west to east, it occupied TRI030W-1, RSCP was about -95dBm and Ec/No was
about -14dB. Download speed 4.9 Mbit/s. When the car was moving, the Download speed and
Ec/No became worse and worse.
Analysis of the case:
According the DT result, there is no strong signal. all the signals are about below -90dbm lead to
weak coverage and bad Ec/No, low speed. We need to enhance TRI030W-1 and TRI140W-3 to
cover this area. This area was previously covered by the TRI093W, After the TRI093W is removed,
3G signal gets worse nearby.

Solution:
1. Adjust the azimuth of TRI030W-1 from 25° to 35°, the Down tilt from 4° to 2°.
2. Adjust the azimuth of TRI140W-3 from 265° to 270°.
3. Restore the original TRI093. (LON: 13.13284°, LAT: 32.8721°).
Action:
1. Adjust the azimuth of TRI140W-3 from 240° to 260°, the Down tilt from 6° to 3°.
2. Adjust the azimuth of TRI030W-1 from 25° to 45°, the Down tilt from 4° to 1°.
Test after optimization：
5. 3G System Performance

Clus te r
5-UM TS-KPI.xls
6. 4G DT Case Analysis

6.1 DT Case Status Statistics

Case Name Closed Open Total
Weak Coverage 7 1 8
Bad SINR 8 1 9
Low Speed 3 1 4
Unclosed details:
6.2.1.7 TRI169L-1 Weak Coverage: Need a new site to solve. 1.Add 4G device to the original
TRI291W2.Add 4G device to the original TRI032D.
6.2.2.8 TRI169L-1 Bad SINR: Need a new site to solve. 1.Add 4G device to the original
TRI291W2.Add 4G device to the original TRI032D.
6.2.3.1 TRI224L-3 Low Speed: TRI224L, TRI031L, TRI627 cannot enter. Because of the severe
outbreak, the owners won't let in.

6.2 DT Case Handle

6.2.1 Weak Coverage

6.2.1.1 TRI090L-3 Weak Coverage

MS occupaied the TRI090L-3 RSRP and SINR were bad.

When the car was moving, the RSRP and SINR became worse and worse.
 After handover to TRI009L-1, theTRI009L-1 SINR and RSRP was also bad.

Description of the case:

MS moved from east to west, it occupied TRI090L-3, RSRP was about -108dBm and SINR was
about -2.5 dB. When the car was moving, the RSRP and SINR of TRI090L-3 became worse and
worse. After TRI090L-3 handover to TRI009L-1, the RSRP and SINR was also bad.
Analysis of the case:
According to DT result, all the signals are about below -110dbm lead to weak coverage and bad
SINR. There the overall coverage is very weak and there is no mainly coverage cell, lead to weak
coverage，so we suggest a new site here.
Solution:
1. Add 4G device to the original TRI922D. (LON: 13.144513°, LAT: 32.879028°).
Action:
1. Add 4G device to the original TRI922D. (LON: 13.144513°, LAT: 32.879028°).
Test after optimization：
6.2.1.2 TRI719L-3 Weak Coverage

MS occupaied the TRI719L-3 RSRP and SINR were good

 When the car was moving, the RSRP and SINR became worse and worse.

Description of the case:

MS moved from east to west, it occupied TRI719L-3, RSRP was about -96dBm and SINR was
about 1.8 dB. When the car was moving, the RSRP and SINR of TRI719L-3 became worse and
worse.
Analysis of the case:
According to DT result, this area is weak coverage and bad SINR. we want TRI719L-3 to
cover this area.
Solution:
1. Adjust the azimuth of TRI719L-3 from 250° to 275°.
2. Adjust the Down tilt of TRI719L-3 from 4° to 0°.

Action:
1. Adjust the azimuth of TRI922L-1 from 60° to 65°.
2. Adjust the Down tilt of TRI922L-1 from 3° to 5°.
Test after optimization：
6.2.1.3 TRI030L-1 Weak Coverage

MS occupaied the TRI030L-1 RSRP and SINR were good

 When the car was moving, the RSRP and SINR became worse and worse.

After handover to TRI140L-1,RSRP and SINR slowly getting better.

Description of the case:

MS moved from north to south, it occupied TRI030L-1, RSRP was about -98dBm and SINR was
about 9.5 dB. When the car was moving, the RSRP and SINR of TRI030L-1 became worse and
worse. After handover to TRI140L-1, RSRP and SINR slowly getting better.
Analysis of the case:
According to DT result, this area is weak coverage and bad SINR. this area should be covered
by TRI030L-1，so need put up tilt to enhance this area coverage. This area was previously
covered by the TRI093, After the TRI093 is removed, 3G signal gets worse nearby.
Solution:
1. Adjust the Down tilt of TRI030L-1 to 0°, the azimuth 15° to 25°.
2. Adjust the azimuth of TRI140L-3 from 245° to 255°.
3. Restore the original TRI093. (LON: 13.13284°, LAT: 32.8721°)
Action:
1. Adjust the azimuth of TRI140L-3 from 240° to 260°, the Down tilt from 6° to 3°.
2. Adjust the Down tilt of TRI030L-1 to 1°, the azimuth 15° to 45°.
Test after optimization：
6.2.1.4 TRI425L-3 Weak Coverage

MS occupaied the TRI097L-1 RSRP and SINR were good.

When the car was moving, the RSRP and SINR became worse and worse, after handover to TRI425L-3,RSRP and SINR very poor.

Description of the case:

MS moved from west to east, it occupied TRI097L-1, RSRP was about -100dBm and SINR was
about 10 dB. When the car was moving, the RSRP and SINR became worse and worse, after
handover to TRI425L-3, RSRP and SINR very poor.
Analysis of the case:
According to DT result, this area should be covered by TRI425L-3，so need put up tilt to
enhance this area coverage.
Solution:
1. Adjust the Down tilt of TRI425L-3 from 2° to 0°, the azimuth 250° to 260°.
Action:
1. Adjust the Down tilt of TRI425L-3 from 2° to 0°, the azimuth 250° to 270°.
Test after optimization：
6.2.1.5 TRI143L-1 Weak Coverage

MS occupaied the TRI143L-1 RSRP and SINR were good.

When the car was moving, the RSRP and SINR became worse and worse,
 After handover to TRI184L-3,RSRP and SINR very poor.

Description of the case:

MS moved from west to east, it occupied TRI143L-1, RSRP was about -91dBm and SINR was
about 13 dB. When the car was moving, the RSRP and SINR became worse and worse, after
handover to TRI184L-3, RSRP and SINR very poor.
Analysis of the case:
According to DT result, this area should be covered by TRI143L-1and TRI184L-2，so need
put up tilt to enhance this area coverage.
Solution:
1. Adjust the Down tilt of TRI143L-1 from -4° to 0°, the azimuth 0° to 15°.
2. Adjust the antenna tilt for TRI184L-2 from 2° to 1°, the antenna azimuth from 135° to 155°.
Action:
1. Adjust the Down tilt of TRI143L-1 from -4° to -2°, the azimuth 0° to 15°.
2. Adjust the antenna tilt for TRI184L-2 from 2° to 1°, the antenna azimuth from 135° to 155°
Test after optimization：
6.2.1.6 TRI097L-2 Weak Coverage

MS occupaied the TRI097L-2 RSRP and SINR were good.

 When the car was moving, the RSRP and SINR became worse and worse,

After handover to TRI143L-3,RSRP and SINR very poor.

Description of the case:

MS moved from north to south, it occupied TRI097L-2, RSRP was about -97dBm and SINR was
about 15 dB. When the car was moving, the RSRP and SINR became worse and worse, after
handover to TRI143L-3, RSRP and SINR very poor.
Analysis of the case:
According to DT result, this area should be covered by TRI097L-2and TRI143L-3，so need
put up tilt to enhance this area coverage.
Solution:
1. Adjust the Down tilt of TRI143L-3 to 0°, the azimuth from 220° to 250°.
2. Adjust the antenna tilt for TRI097L-2 from 3° to 1°, the antenna azimuth from 80° to 95°.
3. Adjust the antenna tilt for TRI425L-2 from 2° to 0°.
Action:
1. Adjust the antenna tilt for TRI425L-2 from 2° to 0°.
2. Adjust the antenna tilt for TRI097L-2 from 2° to 0°, the antenna azimuth from 80° to 95°.
3. Adjust the Down tilt of TRI143L-3 to 0°, the azimuth from 220° to 250°.
Test after optimization：
This is a densely populated area, with little improvement in signal after adjustment. TRI143L the
height of the station is 16 meters, nearby buildings are taller and block the signal. We suggest
adding new 4G devices to existing 3G TRI633W site to solve the problem.
Add 4G device to the original TRI633W. (LON: 13.07388°, LAT: 32.8503°)
6.2.1.7 TRI169L-1 Weak Coverage

MS occupaied the TRI097L-3 RSRP and SINR were good.

When the car was moving, the RSRP and SINR became worse and worse,
 After handover to TRI169L-1,RSRP and SINR very poor.

Description of the case:

MS moved from east to west, it occupied TRI097L-3, RSRP was about -99dBm and SINR was
about 7 dB. When the car was moving, the RSRP and SINR became worse and worse, after
handover to TRI169L-1, RSRP and SINR very poor.
Analysis of the case:
According to DT result, surrounding coverage sites are far away for this area, all the signals
are about below -110dbm lead to weak coverage and bad SINR. So we suggest build a new
site here.
Solution:
1. Add 4G device to the original TRI291W. (LON: 13.06163°, LAT: 32.84691°).
2. Add 4G device to the original TRI032D. (LON: 13.076°, LAT: 32.84208°).
Action:
1.
Test after optimization：
6.2.1.8 TRI169L-2 Weak Coverage

MS occupaied the TRI169L-2 RSRP and SINR were good.

When the car was moving, the RSRP and SINR became worse and worse,
 After handover to TRI268L-3,RSRP and SINR very poor.

Description of the case:

MS moved from north to south, it occupied TRI169L-2, RSRP was about -93dBm and SINR was
about 11dB. When the car was moving, the RSRP and SINR became worse and worse, after
handover to TRI268L-3, RSRP and SINR very poor.
Analysis of the case:
According to DT result, this area should be covered by TRI169L-2 and TRI268L-3，so need
put up tilt to enhance this area coverage.
Solution:
1. Adjust the antenna tilt for TRI169L-2 from 2° to 0°, the antenna azimuth from 120° to 110°.
2. Adjust the antenna tilt for TRI268L-3 from 2° to 0°, the antenna azimuth from 220° to 275°.
Action:
1. Adjust the antenna tilt for TRI169L-2 from 2° to 0°, the antenna azimuth from 120° to 110°.
2. Adjust the antenna tilt for TRI268L-3 from 2° to 0°, the antenna azimuth from 220° to 250°.
Test after optimization：
6.2.2Bad SINR

6.2.2.1 TRI090L-3 Bad SINR

MS occupaied the TRI090L-3 RSRP and SINR were bad .

Description of the case:

Please refer to ‘6.2.1.1 TRI090L-3Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.1 TRI090L-3Weak Coverage’.
Action:
Please refer to ‘6.2.1.1 TRI090L-3Weak Coverage’.
Test after optimization：
6.2.2.2 TRI719L-3 Bad SINR

MS occupaied the TRI719L-3 RSRP and SINR were bad .

Description of the case:

Please refer to ‘6.2.1.2 TRI719L-3Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.2 TRI719L-3Weak Coverage’.
Action:
Please refer to ‘6.2.1.2 TRI719L-3Weak Coverage’.
Test after optimization：

6.2.2.3 TRI140L-3 Bad SINR

MS occupaied the TRI140L-3 SINR was bad

Description of the case:
Please refer to ‘6.2.1.3 TRI030L-1Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.3 TRI030L-1Weak Coverage’.
Action:
Please refer to ‘6.2.1.3 TRI030L-1Weak Coverage’.
Test after optimization：
6.2.2.4 TRI241L-2 Bad SINR

MS occupaied the TRI241L-2 RSRP and SINR were good

When the car was moving, the RSRP and SINR became worse and worse.

Description of the case:

MS moved from north to south, it occupied TRI618L-3, RSRP was about -96dBm and SINR was
about 5dB. When the car was moving, the SINR became worse and worse.
Analysis of the case:
According to DT result, there is no mainly coverage cell lead to pilot pollution, final lead to
bad SINR. This area should be covered by TRI241L-2，so need put up tilt to enhance this
area coverage.
Solution:
1. Adjust the Down tilt of TRI203L-2 to 4°.
2. Adjust the Down tilt of TRI241L-2 from 4° to 2°, the azimuth 170° to 135°.
3. Adjust the Down tilt of TRI036L-3 from 6° to 4°.
Action:
1. Adjust the Down tilt of TRI241L-2 from 5° to 2°, the azimuth 175° to 135°.
2. Adjust the Down tilt of TRI203L-2 from 3° to 4°.
3. Adjust the Down tilt of TRI036L-3 from 6° to 5°.
Test after optimization：
6.2.2.5 TRI425L-3 Bad SINR

MS occupaied the TRI425L-3,RSRP and SINR very poor.

Description of the case:

Please refer to ‘6.2.1.4 TRI425L-3Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.4 TRI425L-3Weak Coverage’.
Action:
Please refer to ‘6.2.1.4 TRI425L-3Weak Coverage’.
Test after optimization：
6.2.2.6 TRI184L-3 Bad SINR

MS occupaied the TRI184L-3,RSRP and SINR very poor.

Description of the case:

Please refer to ‘6.2.1.5 TRI143L-1Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.5 TRI143L-1Weak Coverage’.
Action:
Please refer to ‘6.2.1.5 TRI143L-1Weak Coverage’.
Test after optimization：

6.2.2.7 TRI097L-2 Bad SINR

MS occupaied the TRI097L-2 RSRP and SINR were bad

Description of the case:
Please refer to ‘6.2.1.6 TRI097L-2Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.6 TRI097L-2Weak Coverage’.
Action:
Please refer to ‘6.2.1.6 TRI097L-2Weak Coverage’.
Test after optimization：
6.2.2.8 TRI169L-1 Bad SINR

MS occupaied the TRI169L-1 RSRP and SINR were bad

Description of the case:

Please refer to ‘6.2.1.7 TRI169L-1Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.7 TRI169L-1Weak Coverage’.
Action:
Please refer to ‘6.2.1.7 TRI169L-1Weak Coverage’.
Test after optimization：
6.2.2.9 TRI268L-3 Bad SINR

MS occupaied the TRI268L-3 RSRP and SINR were bad

Description of the case:

Please refer to ‘6.2.1.8 TRI169L-2Weak Coverage’.
Analysis of the case:
Please refer to ‘6.2.1.8 TRI169L-2Weak Coverage’.
Action:
Please refer to ‘6.2.1.8 TRI169L-2Weak Coverage’.
Test after optimization：
4.2.4Low Speed

6.2.3.1 TRI224L-3 Low Speed

MS occupaied the TRI224L-3, FTP Download speed 19 Mbit/s, ti is very good.

 When the car was moving, Download speed became worse and worse.

After handover to TRI627L-3, theTRI627L-3 Download speed and SINR all bad.

Description of the case:

MS move from west to east, it occupied TRI224L-3, RSRP was about -87dBm and SINR was about
15dB. Download speed 19Mbit/s. When the car was moving, Download speed became worse and
worse.
Analysis of the case:
According the DT result, there are no strong signals in this area. All the signals are about below
-105dbm lead to weak coverage and bad SINR.TRI224L-3/TRI031L-3/TRI627L-3 was MOD
3Inter-Cell Interference.
Solution:
1. Adjust the down tilt of TRI224L-3 from 2° to 0°, the azimuth 245° to 265°.
2. Adjust the azimuth of TRI224L-1 from 0° to 30°, the down tilt to 5°.
3. Adjust the down tilt of TRI031L-3 from 2° to 0°.
4. Parameters change: TRI224L-3 PCI change to 184, TRI224L-2 PCI change to 185.
Action:
1. Parameters change: TRI224L-3 PCI change to 184, TRI224L-2 PCI change to 185
2. .
Test after optimization：

6.2.3.2 TRI140L-2 Low Speed

MS occupaied the TRI140L-2, FTP Download speed 17 Mbit/s, ti is good.

 When the car was moving, download speed became worse and worse.

After TRI011L-3 handover to TRI621L-2, the Download speed no good.

Description of the case:

MS move from west to east, it occupied TRI140L-2, RSRP was about -83dBm and SINR was about
11dB. Download speed 17 Mbit/s. When the car was moving, download speed became worse and
worse.
Analysis of the case:
According the DT result, there is no mainly coverage cell lead to pilot pollution, final lead to bad
SINR, low download rate. we need to enhance TRI140L-2 and TRI723L-1 to cover this area
Solution:
1. Adjust the Down tilt of TRI140L-2 to 0°.
2. Adjust the antenna tilt for TRI723L-1 from 1° to 3°, the antenna azimuth from 340° to 310°.
3. Adjust the antenna tilt for TRI723L-3 from 3° to 5°, the antenna azimuth from 240° to 230°.
Action:
1. Adjust the Down tilt of TRI140L-2 to 0°.
2. Adjust the antenna tilt for TRI723L-1 from 3° to 5°, the antenna azimuth from 340° to 320°.
3. Adjust the antenna tilt for TRI723L-3 from 4° to 5°, the antenna azimuth from 245° to 230°.
Test after optimization：
6.2.3.3 TRI090L-2 Low Speed

MS occupaied the TRI090L-2, RSRP and SINR was goog, but FTP Download speed 7 Mbit/s, ti is no good.

When the car was moving, download speed became worse and worse.
 After TRI011L-3 handover to TRI621L-2, the Download speed become lower and lower.

Description of the case:

MS move from south to north, it occupied TRI090L-2, RSRP was about -96dBm and SINR was
about 4dB. Download speed 7 Mbit/s. When the car was moving, the Download speed became
worse and worse.
Analysis of the case:
According the DT result, there overall coverage is very weak and the dense houses blocked the
signals lead to weak coverage. And TRI090L-2/TRI723L-2 was MOD 3Inter-Cell Interference.
Solution:
1. Adjust the antenna tilt for TRI723L-2 from 2° to 0°, the antenna azimuth from 130° to 95°.
2. Adjust the Down tilt of TRI090L-2 from 5° to 2°.
3. Parameters change: TRI090L-3 PCI change to 451, TRI090L-2 PCI change to 452.
Action:
1. Adjust the antenna tilt for TRI723L-2 from 3° to 5°, the antenna azimuth from 130° to 115°.
2. Adjust the Down tilt of TRI090L-2 from 6° to 2°.
3. Parameters change: TRI090L-3 PCI change to 451, TRI090L-2 PCI change to 452.
Test after optimization：
6.2.3.4 TRI090L-3 Low Speed

MS occupaied the TRI009L-2, FTP Download speed 13 Mbit/s, ti is good.

 When the car was moving, handover to TRI621L-2, the download speed became worse and worse.

Description of the case:

MS move from west to east, it occupied TRI009L-2, RSRP was about -91dBm and SINR was about
15dB. Download speed 13Mbit/s. When the car was moving, handover to TRI621L-2, the
download speed became worse and worse.
Analysis of the case:
According the DT result, the overall coverage is very weak and there is no mainly coverage cell,
distant sites do not cover well here. This area was previously covered by the TRI422L-1, After
the TRI422L is removed, 4G signal gets worse nearby.
Solution:
1. Restore the original TRI422L. (LON: 13.14178°, LAT: 32.87493°)
2. Adjust the antenna tilt for TRI090L-3 from -4° to 0°, the antenna azimuth from 260° to 270°.
Action:
1. Adjust the antenna tilt for TRI090L-3 from -4° to 0°, the antenna azimuth from 260° to 270°.
Test after optimization：
7. 4G System Performance

Clus te r
5-LTE-KPI.xls x
8. Remain Issue

8.1 TRI627

After TRI627 UBR, TRI627W/L-1 and TRI627W/L-3 cross. Need engineering rectification but no
access to get in this site because of owner issue recently.

8.2 Promote the opening of new sites.

Build the following sites as soon as possible to enhance 4G network coverage: TRI093L,
TRI633L, TRI291L, TRI032L, TRI422L.
7.
8.