Scribd
Upload
203 views1 page

CBR Test Report for Engineers

This document reports the results of a California Bearing Ratio (CBR) test conducted on a subgrade material sample according to AASHTO T 193-99. The test was performed in the laboratory of the International Airport of President Nicolau Lobato in Comoro. The test measured the dry density, water content, and penetration resistance of the material when subjected to increasing loads over time. The CBR values calculated at 0.1 inch and 0.2 inch penetration depths were 70.31 kgf/cm2 and 105.46 kgf/cm2, respectively.

Uploaded by

Dominto Mico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
203 views1 page

CBR Test Report for Engineers

This document reports the results of a California Bearing Ratio (CBR) test conducted on a subgrade material sample according to AASHTO T 193-99. The test was performed in the laboratory of the International Airport of President Nicolau Lobato in Comoro. The test measured the dry density, water content, and penetration resistance of the material when subjected to increasing loads over time. The CBR values calculated at 0.1 inch and 0.2 inch penetration depths were 70.31 kgf/cm2 and 105.46 kgf/cm2, respectively.

Uploaded by

Dominto Mico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TEST REPORT ON THE CALIFORNIA BEARING RATIO

AASHTO T 193 - 99

No Ref : 01/CBR/MPIE - ADN/MCP - DL/VI/2019


Data of Test : 3 - 6 -2019
Kind of Material : Subgrade
At of Test : Laboratory ADN
Location : International Airport of President Nicolau Lobato Comoro
Metode : Modification
Blows : 10

NO DRY DENSITY AFTER BEFORE


700
A Volume of Mould (cm3) 2248.9 2248.9
B Weight of Mould (g) 7780 7780
650
C Weight of Mould + Sample (g) 12019 11168
D Weight of Sample (g) ( C - B ) 4239 3388
E 600
Wet Density ( g/cm3) ( D / A ) 1.885 1.507
F Dry Density (g/cm3) E / (100 + L) x 100 1.752 1.426 1.58926623
WATER CONTENT ( WC ) AFTER BEFORE 550

G Weight of Wet Sample + Cont. (g) 412.3 381.0


H Weight of Dry Sample + Cont. (g) 387.6 363.5 500

I Weight of of Water (g) (G-H) 24.7 17.5


J Weight of of Container (g) 61.7 51.9 450
Resistance to penetration, kg F

K Weight of Dry Sample (g) (H-J) 325.9 311.6


L Water Content ( WC) I / K x 100 7.58 5.62 400
PENETRATION
Profing Ring Cal 43.7 Lbs/Div Piston Area 18.086 cm2 350
Time Flow Dial Load Resistance
(Minute) (Inchi) (Div) (Kg f) Kg f/cm2 300
0.25 0.0125 0 0 0.0
0.30 0.0250 0 0 0.0 250
1.00 0.0500 1.5 30 1.6 218
1.50 0.0750 3 59 3.3 f(x) = −200
628.709946267834 x² + 959.60530333958 x − 11.5363672299884

2.00 0.1000 4 79 4.38


3.00 0.1500 6 119 6.6 159
150
4.00 0.2000 8 159 8.8
119
6.00 0.3000 11 218 12.1 100
8.00 0.4000 12 524 29.0 79
10.00 0.5000 59
50
NILAI CBR 30

0.1 inch 4.3 / 70.31 6 % 0 000


0.0000 0.1000 0.2000 0.3000 0.4000

0.2 inch 8.6 / 105.46 8 % Penetration (Inch)

Standard CBR Volue : @ 0.10 inci = 70.31 kgf/cm2


@ 0.20 inci = 105.46 kgf/cm2
0.2 3145

You might also like