EX4 Operation Manual

Important Notes:
● For safety and to avoid loss of property, please read this manual carefully.
● Please do not disassemble, modify or repair the aircraft. If necessary, please contact the
agent.
● Please download this manual in PDF on "Help" in the upper right corner of the APP home
page.
● This manual is subject to change without prior notice.
Contents
Contents.....................................................................................................................................................................
Product Overview................................................................................................................................................... 1
Introduction........................................................................................................................................................ 1
Preparing the Aircraft....................................................................................................................................... 1
Aircraft Diagram................................................................................................................................................ 2
Flight Modes...................................................................................................................................................... 3
Aircraft LEDs and Status Indicator.................................................................................................................4
Remote Controller Status Indicator................................................................................................................5
Return to Home (RTH).....................................................................................................................................5
Vision Position System.................................................................................................................................... 6
Aircraft Power Switch....................................................................................................................................... 8
Aircraft Battery...................................................................................................................................................8
Attach and Detach the Propellers................................................................................................................ 10
Remote Controller................................................................................................................................................11
Power On and Power Off.............................................................................................................................. 11
Function and Status of Remote Controller................................................................................................. 11
Throttle Control Stick Mode.......................................................................................................................... 14
Mounting the Phone Holder.......................................................................................................................... 14
Download APP................................................................................................................................................15
Flight...................................................................................................................................................................... 16
Flight Environment Requirements............................................................................................................... 16
Test Flight........................................................................................................................................................ 16
Remote Controller to Control Flight............................................................................................................. 21
Use APP to Control the Aircraft....................................................................................................................24
Introduction of Main Interface....................................................................................................................... 28
Flight Modes for APP..................................................................................................................................... 31
Photo and Video for APP.............................................................................................................................. 34
Appendix................................................................................................................................................................37
Specification.................................................................................................................................................... 37
Warranty Information..................................................................................................................................... 40
Important Statement.......................................................................................................................................40
Flight Safety Guidelines.................................................................................................................................41
 EX4 Operation Manual

Product Overview
Introduction
The EX4 aircraft is equipped with a vision positioning and GPS positioning system, which allows it
to fly and hover stably indoors and outdoors, and has fucntions such as one key RTH, orbit mode,
Track, and waypoint flight, etc. The EX4 is equipped with a 3-axis mechanical stabilization gimbal
to capturehigh-resolution pictures and videos. It can adjust the camera angle during flight to
capture unique photos and videos from different angles for better aerial photography experience.
The DF806 can be used with remote controller and APP to realize various operations and settings
of the aircraft and camera. The App on the phone can display real time high-definition FPV
(First-person view) and information like flight parameters at the same time.
Its maximum flight speed is 30km/h,flight time approach to 25 minutes.

Preparing the Aircraft.

Unfold the Aircraft
The Aircraft is folded inside the package. Follow the steps below to unfold the aircraft.
1. Step 1: Expand the arm outward (Pic. 1);
2. Step 2: Unfold the landing gear (Pic. 2);
3. Step 3: Separate the propeller blades (Pic. 3);
4. Step 4: Unfold the other arms and repeate step 2~3 with each arm (Pic. 4).

Pic. 1

Pic. 2

Pic. 3

Pic. 4

Battery Installation
1. Step 1: Slide the battery into the front of the battery compartment (Pic. 5);
2. Step 2: Then press the back of the battery down (Pic. 6);
3. Step 3: make sure that the latch on the battery is locked and the battery is in place. (Pic.7).

Pic. 5

Pic. 6

Pic. 7

Warning: If the battery is not installed properly, the aircraft may crash due to power-cut during flight.。

--- 1 ---
 EX4 Operation Manual

Pic. 8

Pic. 9

● Please use both hands to install the battery. Installing the battery with one hand may result
in poor battery installation.
TF Card Installation
The TF card slot is in the front of the bottom of the aircraft
body.
Before installing the TF card, open the TF card slot cover as
shown on the right picture, then insert the TF card into the
slot, and confirm that the TF card is in the right place, then Pic. 10
close the TF card slot cover.
● Please use micro SD card with transmission speed of
Class 10 and above or UHS-1 rating; maximum
support for 32GB capacity.
● Warning: Do not install or remove the TF card while the aircraft is powered on. Otherwise,
errors will occur for the data stored.

Aircraft Diagram

Pic. 11

 Counterclockwise Motor/ B  Optical Flow Status Indicator  Gimbal/Camera

Propeller
Clockwise Motor/A Propeller  Landing Gear  TF Card Slot

--- 2 ---
 EX4 Operation Manual
 Aircraft Battery  Flight Status Indicator

Pic. 12

 Antenna  Flight Mode Switch  Return to Home  Mode Indicator

 Power Indicator Button
 Left Joystick  Right Joystick  Power Switch
 One key  Photo/Video  Mobile Phone  USB Charging
Takeoff/Land
 Camera Pitch Holder Interface
Control Puller
Flight Modes
The EX4 has the following flight modes:
Position Mode:
When the aircraft is in GPS mode, it can achieve accurate hover of the aircraft. When the GPS
signal is weak, the aircraft will automatically enter Altitude Mode or vision positioning mode.
Altitude Mode:
In Altitude Mode, when the visual positioning conditions are satisfied, the aircraft will automatically
enter the visual positioning mode,in the visual positioning mode, the aircraft can hover stably with
the vision positioning system.
When the visual positioning condition is not satisfied, the aircraft will hold the current altitude by
barometer. Accurate hover can not be achieved, as the aircraft has possibility to drift horizontally
and it requires user with skilled flight control.

--- 3 ---
 EX4 Operation Manual

Aircraft LEDs and Status Indicator

Pic. 13

Vision Positioning Status Indicator – LED ①

NO. LED Status Meaning
1 Flashing red light Vision positioning failure
2 Solid red light In vision positioning

Flight Status Indicator – LED ②

NO LED Status meaning
1 Solid blue light after power on System self-diagnostic tests
2 Solid green light Remote controller connected; GPS positioned
3 Flashing green light Remote controller connected; GPS not positioned
4 Red and blue light flashes alternately Aircraft is in compass horizontal calibration.
5 Red and green light flashes alternately Aircraft is in compass vertical calibration.
6 Flashing blue light No remote control signal, GPS not positioned
7 Solid blue light Remote controller not connected; GPS positioned
8 Solid red light Serious error
9 Flashing red light Low battery alarm
10 Red light flashes doubly Alarm for severe low battery
11 Green light flashes doubly Beginner mode (GPS not positioned)
12 Blue and green light flashes alternately Compass data error

--- 4 ---
 EX4 Operation Manual

Remote Controller Status Indicator

Pic. 14

Flight Mode Indicator -- LED①

NO. LED Status Sound Meaning
1 Solid green light N/A GPS Mode
2 Solid red light N/A Attitude Mode

Power Indicator -- LED②

NO. LED Status Sound Meaning
Flashing green light
1 N/A In charging
during charging
Solidgreen light during
2 N/A Charging complete
charging
3 Solid green light N/A The remote controller is working normally
4 Red light flashes slowly B-B-B-······ Low battery alarm; please charge immediately
Severe low battery alarm; the remote controller will shut
5 Red light flashes quickly B-B-B-······ down automatically after the light flashes and the sound
stops
6 Solid red light N/A Serious error
The remote controller is idle for more than 5 minutes
BB-BB-BB-···
7 Green light flashes doubly after power-on; the prompt disappears automatically
···
once operate the remote controller again

Return to Home (RTH)

Aircraft has Return-to-Home (RTH) function, and there are 3 types of RTH: one-key RTH, low
battery RTH and lose control RTH. When the GPS signal is good and the aircraft successfully
records the return point, if the user turns on One-key RTH, or the aircraft triggers low battery RTH,
or the communication signal between the remote controller and the aircraft is lost, the aircraft will
automatically return to the return point and land.
Before the aircraft takes off, when the aircraft status indicator turns green and the GPS mode is
displayed on the APP, the current position of the aircraft will be recorded as the return point.

--- 5 ---
 EX4 Operation Manual
One Key RTH
When the GPS signal is good (the aircraft status indicator is solid green), the aircraft can return to
the return point via the “ ” button on the remote control, and the return process is the same as
lose control RTH. The difference is that when the aircraft returns and begins to land, the user can
control the aircraft through the joystick to avoid obstacles and change the landing position. After
pressing and holding the “ ” button for more than 2 seconds to exit the return, the user can
regain control of the aircraft.
Low Battery RTH
During the flight, when the red light of the aircraft status indicator flashes slowly, the aircraft
triggers low battery RTH. During the landing, the user can control the aircraft by joystick to avoid
obstacles and change the landing position.
Lose Control RTH
When the GPS signal is good (the aircraft status indicator is solid green), the compass is working
normally, and the aircraft successfully records the return point, if the remote control signal
continues to be lost for more than 2 seconds, the flight control system will take over the control of
the aircraft and control the aircraft to fly back to the last recorded return point. If the signal of the
remote controller is restored later during the flight, the return process will continue, but the user
can cancel the return and regain the control of the aircraft through the RTH button “ ”.
Attentions：
● The aircraft cannot avoid obstacles when it is flying back during the RTH process.
● The aircraft cannot return to the Return Point if the GPS signal is weak or unavailable.
● During RTH process, when the aircraft is flying above 30 meters, the aircraft will
immediately perform the RTH function; when flying below 30 meters, the aircraft will rise to
30 meters automatically and then perform the RTH function.
● If the aircraft does not receive the satellite signal or the signal of the remote controller
continues to be lost for more than 2 seconds, the aircraft will not be able to return, and will
slowly descend until it lands.

Vision Position System

Consisted by ultrasonic sensor ① and camera ② ,The vision system is composed by vision
sensor and ultrasonic sensor, The position information of aircraft can be obtained by vision sensor,
and the current height can be judged by the ultrasonic sensor, so that the precise positioning and
safe flight of aircraft can be ensured.

Pic. 15

--- 6 ---
 EX4 Operation Manual

Vision Positioning System

The Vision Positioning System is typically used in indoor environment when GPS is weak or
unavailable. It works best when the aircraft altitude is less than 3 meters.

Pic. 16

The precision of the vision system is easily affected by the light strength and features of the surface
textures. It would happen if the ultrasonic sensor could not work normally to detect the
altitude when it is flying over objects that is made by sound-absorbing materials. Once the
vision sensor and ultrasonic sensor are both not available, aircraft will switch to altitude
mode automatically. Be cautious to operate the aircraft in the following situation:
● Fly fast at an altitude below 0.5m.
● Fly over monochrome surfaces (like pure black, pure red, pure red and pure green).
● Fly over strong light reflective surfaces or surfaces prone to reflection.
● Fly over water or transparent object surfaces.
● Fly over moving object surfaces (such as crowds, swaying juggles and glass).
● Fly over an area where light changes dramatically and rapidly.
● Fly over surfaces extremely dark (lux<10) or extremely bright (lux>10,000).
● Fly over material surfaces that absorb ultrasonic waves (like thick carpet).
● Fly over surfaces without clear textures.
● Fly over surfaces with highly repeating textures (small grid brick in the same color).
● Fly over surfaces that are tilting over 30 degrees (could not receive the echo of the
ultrasonic wave).
● Flying speed should be controlled not to be too fast. When the aircraft is 1 meter against the
ground, the flying speed should not be over 5m/s; When the aircraft is 2 meter against
ground, the flying speed should not be over 14m/s.
● Keep sensors clean at all the time.
● The vision system is only effective when the aircraft is within the altitude of 3 meters.
● Make sure that the light is bright enough and the surfaces is with clear textures so that the
vision system can acquire the movement information through recognizing the ground

--- 7 ---
 EX4 Operation Manual
textures.
● The vision system may not function properly when the aircraft is flying over water, low light
ground and surfaces without clear patterns or textures.
● Do not use other ultrasonic device with a frequency of 40KHz when the vision system is in
operation.

Aircraft Power Switch

Aircraft Power On/Off
Press and hold the power switch of the aircraft for about 2 seconds, the aircraft will power on. At
this time, the aircraft will sound a tone, and the front and rear lights will be on; press and hold
again the power switch for about 2 seconds, the aircraft will power off, and the front and rear lights
will be off.

Pic. 17

Aircraft Battery
The aircraft battery capacity is 2400mAh, and its rated voltage is 11.4V. This battery uses
high-energy battery cells.

Pic. 18

Pic. 19

Aircraft Battery Balanced Charger

Check Battery Life

Insert the aircraft battery into the charger (do not connect to the power supply), user can see the
current battery power by the status of the indicator light of the charger as shown:

--- 8 ---
 EX4 Operation Manual

Pic. 20

Charging
Be sure to fully charge the aircraft battery each time before flight. The aircraft battery must be
charged using the officially supplied dedicated charger. With 5V 2A adaptor, the charging time is
about 270 minutes.
Please charge the battery as the following steps:
Step1: Connect the USB power adapter and the battery balanced charger with a USB cable;
Step2: Connect the USB power adapter with a household power outlet;
Step3: Insert the flight battery into the balanced charger and make sure the connection is secure.

Pic. 21

Attention:
● Adult supervision is needed when the aircraft is charging. Batteries are only to be charged
under adult supervision.
● Do not short circuit and squeeze the battery to avoid explosion.
● The battery should not be short-circuited, decomposed or put into the fire; and the battery
should not be placed in high temperature and heated places (such as in the fire or near the
electric heating device).
● The model can only use the recommended charger. Regular checks should be made to
check whether the charger's wires, plugs, housing and other components are damaged.
When damaged, the charger should be stopped using until repaired.
● Charger is not a toy; charger can only be used indoors.
● After the flight, the battery needs to be charged before storing. If not using it, it is
recommended to charge the battery at least once a month to avoid permanent battery
damage due to excessive discharge.
● Only 5V USB power adapters that meet local laws and regulations can be used.

--- 9 ---
 EX4 Operation Manual
Attach and Detach the Propellers
Attach/Detach the Propellers
The propellers are pre-installed in the package. If the propeller is damaged during using, please
replace the propellers according to the following steps:
Detach the Propellers
Loose the two screws in the aircraft arm counterclockwise with the hex key included in the
package, , and then slowly pull the propeller out.

Pic. 22

Pic. 23

Attach the Propellers

Please install the propeller A into the arm A, and propeller B into the arm B. Insert the propeller
into the shaft and align the two holes on the propeller to those on the shaft. Then tighten the two
screws clockwise with the hex key.

Pic. 24

Pic. 25

● Make sure that the propeller A and propeller B are installed in the correct positions. The
aircraft will fail to fly normally if the propellers are installed improperly.
● As the propellers are thin, be careful when installing them to prevent accidental scratches.
● Please use the official dedicated propellers for replacement.
● Propellers are consumables. Please purchase the official dedicated propellers if necessary.

--- 10 ---
 EX4 Operation Manual

Remote Controller
Power On and Power Off

Pic. 26

Power on and power off the controller by pressing the power button for more than 2 seconds
Battery Life Check and Battery Charge
After turning on the remote controller, observe the status of the indicator. When the indicator light
is always green, the battery is sufficient; when the indicator light is flashing green, the battery is
insufficient.
Charge the battery according to the following steps:

Pic. 27

Function and Status of Remote Controller

Flight Mode Switch

Pic. 28

Press the “M” button to switch the flight mode of the aircraft. The flight mode indicator light
indicates the current mode.
LED Status Sound Meaning

--- 11 ---
 EX4 Operation Manual
Solid green light N/A GPS Mode
Solid red light N/A Attitude Mode

Gimbal Adjustment
The shooting angle of the camera can be adjusted for better aerial photography experience. As
shown in the figure below, dial the pulley in the upper left corner of the remote control to control
the camera pitch angle.

Pic. 29

Photo/Video
Short press“ ”，with “Beep”sound on RC, which means photo is taken successfully.
Long press“ ” ， with“B-B-”sound on RC, which means video start to record successfully.
Long press“ ” again，with“B-B-”sound on RC, which means video stop to record successfully.

Pic. 30

● Attention: When the aircraft is not inserted with TF card or the TF card malfunction, the
photos and videos will be stored on the mobile device, the quality of video files is relatively
poor.
● Please stop recording before turn off, otherwise it will cause file damage.
● Pictures can not be taken when it’s recording.

One-Key Takeoff/Landing

Pic. 31

Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller
beeps steadily, the aircraft will automatically take off and ascend to the altitude of 1.2 meters and
hover.
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller

--- 12 ---
 EX4 Operation Manual
beeps steadily, the aircraft willl land vertically.

One-Key RTH

Pic. 32

Long press“ ”button,with“B-B-”sound on RC,to start the RTH, The aircraft will fly back to the latest
recorded return point.The joysticks can not be used during the process of ascent and return.
During its landing, user can toggle the joystick to control the aircraft and decide the landing site.
During its return, press the "Return"button again to exit RTH mode, Then the user will regain
control of the aircraft.
Attention：To ensure the return to home point as precise as possible, please fly the aircraft in open
area (no tall buildings in 50 meters of radius, flat in 10 meters of radius) with the GPS
working well. Then the return to home function will be able to activate.
● With the GPS positioning mode turned on, it will automatically enter auto return to home
mode if the remote controller loses control.
● Once the RTH mode is enabled, if the aircraft flies below 30 meters of altitude, the aircraft
will automatically ascend to 30 meters before returning to home point. if the aircraft flies
over 30 meters of altitude, the aircraft will return to home point at the current altitude. Please
do not use other functions during the process of return. Please ensure there are no
obstacles in way of return in case of any potential accidents.
Optimal Transmission Zone
Please fully extend the antennas before the flight. The signal is weak directly above the antenna.
The signal between the aircraft and the remote controller is most reliable when the antennas are
positioned in relation to the aircraft as depicted below.
Ensure that the aircraft is flying within the optimal transmission zone. To maintain optimal
transmission performance, adjust the remote controller and antennas and keep the space
between controller and aircraft clear during the flight.

Pic. 33

--- 13 ---
 EX4 Operation Manual

Throttle Control Stick Mode

Throttle Control Stick Mode

Pic. 34

Mode 2 / Mode 1 Switch

Switch to Mode 2
Toggle the left joystick ① to the lowest position and press the "One-Key Takeoff/ Landing" button
② at the same time. Then turn on the remote controller ③ . Release the joystick ① and the
button ② to enter Mode 2.

Pic. 35

Switch to Mode 1
Toggle the right joystick ① to the lowest position and press the "Photo/ Video" button ② at the
same time. Then turn on the remote controller ③ . Release the joystick ① and the button ② to
enter Mode 1.

Mounting the Phone Holder

1. Insert the phone holder into the slot on the back of the remote controller.
2. Mount the phone to the phone holder.
3. Adjust the phone and antenna until the phone is fixedly mounted .
Pic. 36

Pic. 37

Pic. 38
--- 14 ---
 EX4 Operation Manual

Download APP
Be sure to connect the APP before flying the aircraft. User can control the flight, operate the
gimbal/camera and set flight parameters of the aircraft via the APP.
Scan the QR code to enter the application market to obtain the download address:

Pic. 39

● Please make sure that the mobile software environment is Android 5.0 or above and IOS 9.0
or above, otherwise the APP may not be installed successfully or may work with errors.
● When using the APP, make sure that device supports 5GHz Wi-Fi, otherwise, it will not be
able to connect to the aircraft.
Photos and Videos Saving.
If a SD card is not installed, the video and photos will be saved to the mobile app. In this case, the
video quality is relatively poor (not recommended).
If a SD card is installed in the aircraft, the videos and photos will be saved to the SD card. In this
case, the video quality is much better (recommended).
The videos and photos on the SD card can be transferred to the mobile APP.
Note: Only mobile phones with 5G Wi-Fi can support FPV transmission connection.
● The FPV transmission quality and distance varies by different mobile phones and different
environmental situations.
● Please fly the aircraft in an open and undisturbed
environment as possible for a better FPV transmission
experience..
● The actual test indicates that the maximum FPV transmission
distance approach 1200 meters in an interference-free
environment.

---15 ---
 EX4 Operation Manual

Flight
Flight Environment Requirements
1. Do not fly the aircraft in bad weather such as high winds, snow, rain, foggy weather, etc.
2. Choose a wide, open place with no tall buildings surrounded as a flight site. Buildings that use a
lot of steel bars may affect the compass work and block GPS signals resulting in poor positioning
or even inability to locate the aircraft.
3. When flying, please keep aircraft in sight, away from obstacles, crowds, water, etc.
4. Do not fly in areas that have high-voltage lines, communication base stations or transmission
towers, etc. to avoid signal interference of the remote controller.
5. When flying above 6000m altitude, the performance of the aircraft battery and power system will
be degraded due to environmental factors, thus the flight performance will be affected. Please fly
with caution.
6. GPS is not available for flight in Arctic Circle and Antarctic Circle.
Flight Restrictions and Flight Limits of Special Area
According to the air traffic control regulations and the drone management regulations of ICAO and
different nations’ air traffic control, drones must fly in the prescribed airspace.
Pre-Flight Inspection
1. make sure the remote controller, aircraft battery, and mobile device are fully charger;
2. make sure the propellers intact and installed currectly;
3. Make sure that front and rear arms and the blades are fully unfolded;
4. Make sure that the camera lens is clean;
5. Make sure the TF card installed currectly;
6. Ensure that the battery is firmly installed;
7. Always use original components or accessories certified by the Manufacturer. The use of
non-original accessories may pose a hazard to the use of the aircraft.

Test Flight
Advice for Beginners
Thank you for purchasing the product. Please read the following instructions carefully before flying
to avoid those common improper operations that may damage the aircraft.
It is highly recommended to use the Beginner Mode, in which the flying height of the aircraft will be
limited to 30 meters and the distance will be limited to 50 meters (the height/distance limitation can
be manually adjusted), and the aircraft can only take off if there is a good GPS signal. If user are
already familiar with the operation of the aircraft, user can turn off the Beginner Mode in the
“General Settings” menu of the app.
Please always control the aircraft within a visible range. When the aircraft is under Positioning
Mode and the FPV transmission is choppy and even lost, please activate the RTH function to
return the aircraft automatically.Operating the remote control without knowing the aircraft position
and the surroundings will result in a high possibility of crashing.
If user is not familiar with the manual takeoff and landing of the aircraft, it is recommended to use
the one-key takeoff and landing function, then the aircraft will automatically takeoff or land.
If user are not familiar with the joystick operation, please move the joystick slightly and carefully.
Any slight movement of the joystick will result in significant movement of the aircraft.
Please always pay attention to the heading of the aircraft. The direction controlled by the joystick is
always the same as the direction of where the aircraft camera is. For example, if the aircraft

---16 ---
 EX4 Operation Manual
camera is facing user, push the joystick forward and the aircraft will fly towards user; push the
joystick to the left and the aircraft will fly to the right … same as other cases.
Beginner’s Mode
For beginners, please turn on the beginner’s mode. Once the mode is activated, the aircraft will
locate its own position by GPS before ready to takeoff. If the aircraft can not be controlled after
takeoff, the RTH can be used to allow the aircraft to return automatically.
Pairing Remote Controller and Aircraft
The aircraft is pre-paired with the remote controller in the package, users can use it once turn it on.
However, if the remote controller is replaced or for other reasons that causes a failure in matching
the aircraft and the remote controller, please complete the binding as the following steps:
1. Turn on the power switch of the aircraft and the remote controller;
2. Turn on phone and go to the “Settings - Wireless LAN” menu to check the current list of Wi-Fi
sources. In this case, user will find the aircraft's Wi-Fi signal: Drone-xxxxxx (serial number
including letters and numbers), and the remote's Wi-Fi signal: Controller-xxxxxx (serial number
including letters and numbers). Please record the serial number of the remote controller；
3. Select the aircraft's Wi-Fi signal and connect it;
4. Enter the APP interface and tap “...” button in the upper right corner to enter the “General Setting”
menu;
5. Tap “Pair” in the “Pair RC ”;
6. In the dialog box that pops up (Pic. 41), fill in the serial number of the remote controller user
previously recorded. After confirming the serial number, tap “Pair”;

Pic. 41

7. Go to the “Settings - Wireless LAN” menu of the mobile phone again to check the serial number
of the aircraft and the remote controller. If the serial number is the same, the binding has been
completed. In this case, the LED indicator of the aircraft’s rear arm will become flashing green or
solid green.
Aircraft Self-Diagnostic Tests
When the aircraft and Remote controller are connected successfully, the status indicator turns
solid blue which means that the aircraft enters the self-diagnostic tests procedure. At this time,
please ensure that the aircraft is statically placed on the horizontal ground.
During the self-diagnostic tests of the aircraft, situations like environmental vibrations may cause
the aircraft and the gimbal to work abnormally. If this phenomenon occurs, please power off the
aircraft and put it on the stationary horizontal ground to restart it, and the aircraft will return to
normal working condition.
Aircraft Compass Calibration
The aircraft has a built-in compass that ensures that the aircraft maintains an accurate heading
during intelligent flight. The compass status must be checked before each flight.

---17 ---
 EX4 Operation Manual
○If encounter the following situations, please recalibrate the aircraft compass:
1. Before the flight to a new flight site;
2. When the aircraft status indicator shows that the compass has errors;
3. When the APP and the aircraft remind to calibrate the compass;
4. When the aircraft experiences severe shifting during hovering or flying.

○ Compass Calibration via APP:

1.Enter Calibration Mode:
After the aircraft is connected to the APP, tap the “...” button in the upper right corner of the APP
control interface (Pic. 42) to enter the “General Settings” menu (Pic. 43).

Pic. 42

Pic. 43

Then tap the " Compass Calibration " button.

When the APP pops up a prompt, check the current environment and keep away from metal
objects as prompted. Then tap the "Calibration" button (Pic.44).

Pic. 44

Pic. 45

In this case, when the status indicator on the rear arm of the aircraft flashes blue and red
alternately, the compass calibration mode starts. At this time, the APP interface displays as Pic.
45.
2. Compass Calibration
There are two steps for compass calibration.
Step 1: Horizontal Calibration
When the APP prompts to rotate the aircraft horizontally, place the aircraft horizontally in the hand,
then turn the aircraft horizontally until the status indicator on the rear arm of the aircraft changes to
an alternatively flashing red and green light, which means that the horizontal calibration is
successful.

---18 ---
 EX4 Operation Manual

Pic.46

Step 2: Vertical Calibration

As shown in Pic. 47, when the APP prompts to place the aircraft’s head to be up and rotates, place
the aircraft in the hand as shown in Pic. 48 and ensure that the aircraft body is perpendicular to the
ground; then rotates the aircraft horizontally.

Pic. 47

Pic. 48

When the status indicator on the rear arm of the aircraft turns green (solid or flashing), the
compass is successfully calibrated.
At this time, the APP will prompt “Calibration Successful”, then tap “Finish” to end the calibration
process. If the status indicator turns to solid red light for about 6 seconds, the compass calibration
fails. Please go to another location and recalibrate.
Note: After changing the flight site, make sure to calibrate the compass before the first flight.
● If the aircraft’s LED indicator flashes blue and green alternately during flight, which means
that the compass is abnormal and need to calibrate.
● Stay away from the environment with magnetic interference when calibrating, otherwise the
calibration may fail.
● Do not calibrate in areas with strong magnetic fields, such as magnetic mines, parking lots,
and building areas with underground reinforcement.
● Do not calibrate with carrying ferromagnetic materials such as keys, mobile phones, etc.
● Do not calibrate when large pieces of metal are nearby.

Basic Flight Operation Steps

1. Place the aircraft in a wide open area that its front is user’s front.
2. Turn on the aircraft and remote controller.
3. Connect the remote controller with the aircraft and then proceed aircraft self-diagnostic tests.
4. Connect the APP with mobile device and enter into the FPV interface.
5. Unlock the aircraft after the app indicate:ready go.
6. Pull up the throttle stick then the aircraft takes off, and control the aircraft flight by left/right stick.
7. Pull down the throttle stick to land the aircraft.
8. Pull down the throttle stick to the bottom position and keep for 3 seconds to lock the aircraft.

---19 ---
 EX4 Operation Manual
9. Pull out the battery from the aircraft and then turn off the remote controller.
Video Suggestion and Tips
1. Make sure components of the aircraft are normal before flight;
2. Choose sunny, windy weather for recording
3. Perform test flights to establish flight routes and to preview scenes;;
4. Push the control stick gently to keep the aircraft movement smooth and stable;
5. Choose appropriate gimbal shooting angle
6. Try to record the videos under Positioning Mode

---20 ---
 EX4 Operation Manual

Remote Controller to Control Flight

Power on
Put the aircraft on the flat surface, turn on the Remote controller and aircraft successively, wait for
aircraft on flat ground for about 30 seconds for self-diagnostic tests.
When the aircraft's indicator light turns from flashing or solid blue to flashing or solid green, which
means the Remote controller and aircraft are connected.
Connect APP
Click WLAN setting, and click "Controller-XXXXXX"，exit Settings Options after Wi-Fi Connection
Successfully
Open the APP,enter the home page as shown ， When the bound interface pops up, please tap
"Check" then tap "Start Flying" to enter the flight operation interface, watch real-time images or
perform necessary operations.

Pic. 49

● Connecting Controller -xxxxxx Wi-Fi, the distance between control and image transmission
is relatively long, which is suitable for long-distance flight.
● Please maintain the current wifi connection and not switch to the mobile network.
● Only mobile phones with 5G Wi-Fi can support FPV transmission connection.
● Use APP to monitor the image and the current state of the aircraft.
● The remote controller with APP function will achieve the best effect. The remote controller is
mainly used to control basic flight, The APP can achieve other functions,such as taking
photos or videos, track mode, orbit mode or waypoint flying mode. If user hope to control
aircraft via app, please refer to the “Fly with the APP” belowin this manual.
GPS Signal Status
When the status indicator of the aircraft is solid green, it indicates that the GPS positioning is
normal, and the aircraft can take off safely.
When the green light flashes on the aircraft status indicator, it indicates that the GPS signal is
weak or no signal, and altitude mode can be selected for operation (this mode is difficult to operate,
it is not recommended for beginners to use).
● Set the drone up and get ready to takeoff after the aircraft's indicator light turns solid green
(indicating good GPS signal).
● Please choose an open and spacious field. Tall steel structures and metal materials will
interfere the compass and GPS.
Pic. 50
Operate the Aircraft
Takeoff
Method 1: takeoff manually
Toggle the left and right joysticks outward for at least 3 seconds
(shown as the picture) as to get the propellers started to rotate.
Method 2: one-key takeoff

---21 ---
 EX4 Operation Manual
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller
beeps steadily, the aircraft will automatically take off and ascend to the altitude of 1.2 meters and
hover.
Flight Control by Remote Controller
After takeoff, control the flight of the aircraft as shown。
Ｍode1

Pic. 51

Ｍode2

Pic. 52

Landing
Please be aware to avoid the crowd and obstacles, and ensure that the aircraft is hovering over
the landing site before landing. Choose an open and flat space as landing site.
3. Method 1: land manually
Slowly toggle the throttle joystick to control the aircraft to land. When the drone lands on the
ground, continue to toggle the joysticktowards the lowest position until the propellers stop rotating.
4. Method 2: one-key landing
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller
beeps steadily, the aircraft will land vertically.

---22 ---
 EX4 Operation Manual
Power off
After completing the flight, turn off the aircraft first and then the remote controller.

---23 ---
 EX4 Operation Manual

Use APP to Control the Aircraft

Power on
Put the aircraft on a fat surface, press and hold 2 seconds to turn on the drone.Wait until the
aircraft on flat ground for about 30 seconds to finish its self-diagnostic tests,the aircraft status
indicator will turn to flashing blue.
Connect with the APP
Open WLAN Setting, and click "Drone-XXXXXX", then exit the Setting menu after the Wi-Fi
connection is successful.
Open the APP, enter the home page as shown below. When the notice of binding pops up, tap
"Check" then tap "Start Flying" to enter the main interface. Then, user can monitor real-time FPV
transmission or take necessary operations.

Pic. 53

● When connecting the Wi-Fi “Drone -xxxxxx”, the distance between the controller and FPV
transmission is much shorter.
● Please maintain the current Wi-Fi connection and do not switch to the mobile network.
● Only mobile phones that supports 5G Wi-Fi can support FPV transmission connection.
● Use the APP to monitor the FPV image and the current state of the aircraft.

Select Control Mode

The default setting mode is Mode 2, and user can change the mode on“…”

Pic. 54

Pic. 55

Select Flight Mode

The default flight mode is position mode.
For beginners, it is strongly recommended to fly under the Position Mode. With good flying skills,
user can select Altitude Mode or other modes. The functions of the modes are described in the
next section below.
Take off
5. Method 1: take off manually Pic. 56
Tap the blank area of the screen, and the virtual joysticks
will pop up on the screen. Toggle the left and right joysticks
outward (shownas the picture) to unlock the aircraft and the
propellers will start rotating.

---24 ---
 EX4 Operation Manual
Method 2: one key takeoff
Tap ，it will pop up with a confirmation notice on the screen.
Tap "OK", and the propellers will speed up its rotation and the aircraft will take off.
Please stay away from the aircraft during its takeoff.
Flight Control via APP
After takeoff, control the flight of the aircraft as shown。
Mode 1

Pic. 57

Ｍode 2)

Pic. 58

Gravity Sensor Control

Tap “ “ to open gravity sensor mode. User can control the aircraft to move forward, backward,
or to the left and right by tilting the phone forward, backward, left, and right. Tap this button again
to cancel the gravity sensor mode.

This feature relies greatly on mobile phone performance, so please use this feature cautiously!!!

---25 ---
 EX4 Operation Manual
Warning: Please keep the phone balanced. The phone mush support gravity sensor mode.
Landing
Method 1: land manually
Slowly toggle the throttle joystick to control the aircraft to land. When the drone lands on the
ground, continue to toggle the joystick towards the lowest position until the propellers stop rotating
Method 2: one key landing
Tap and it will pop up with a confirmation notice on the screen. Tap"OK", and the propellers will
automatically start to land.
Please stay away from the aircraft during its landing.
Position Mode：
The default flight mode is position mode. When the aircraft is positioned (the aircraft status
indicator is solid green), the aircraft will be unlocked.
In this mode, the aircraft will be positioned automatically by GPS, so it has better flight stability and
safety.
● Note: It is recommended to use the default Position Mode for the first flight and select other
modes after user is familiar with the operation.
● Please confirm the control mode before flying.

Altitude Mode：
In this mode, the aircraft only has vision positioning mode without GPS positioning, and the motion
of the aircraft is more flexible. It needs skilled operation to control the flight of the aircraft. In the
flight process, if the vision positioning condition is not satisfied (the front light flashing red), the
vision positioning function fails, and the motion of the aircraft relies on manual control.
After fully mastering the operation of position mode, then user can operate under altitude mode.
One-Key RTH
If necessary, tap to start one key RTH.
The App will popup a confirmation notice, and after confirming that the current flight conditions
meet the requirements as the pop-up notice, tap ”ok”.
Return-TO-Home (RTH)
If necessary, user can tap the RTH button “ ” to activate the automatic return function. After RTH
function is activated, the APP will pop up a confirmation notice. Then user need to make sure that
the current flight conditions meet the requirements as the pop-up confirmation notice and tap OK.
Next, the aircraft will then return intelligently with the takeoff point as the home point. All joysticks
cannot be controlled during the ascending (current height≤30 meters) and the return. During its
vertical landing, user can use the joysticks to control the aircraft and decide its landing position.
Press the RTH button again during return will end it and user can control the aircraft again.

Pic. 59

Note: Only the aircraft is positioned by the GPS and there are no barriers around the takeoff site can
ensure an accurate return position.
Warning: During GPS positioning, the aircraft will automatically enter the RTH mode if:
1) The aircraft loses connection with the mobile phone;

---26 ---
 EX4 Operation Manual
2) The aircraft battery is low.
In RTH mode, if the aircraft’s current height is less than 30m, the aircraft will automatically rise to a
height of 30m before return; if greater than 30m, the aircraft will start to return at the current
height. The aircraft cannot be controlled during the return flight. Please make sure that there
are no barriers in the return route to avoid accidents.
Power Off
After the aircraft lands and the propeller stops rotating, turn off the aircraft power switch (press and
hold for 2 seconds).
Then exit the App.

---27 ---
 EX4 Operation Manual

Introduction of Main Interface

Home Page
After opening the app, user will enter the “Home Page” as shown below:

Pic. 60

Help Menu:
Tap to download the user instruction and other documentation.
Enter the Main Interface:
When the APP is not connected to the aircraft, the “Interface View” is displayed; when it is
connecting, “Connecting...” is displayed; after the APP is connected to the aircraft, “Start Flying” is
displayed and user can tap it to enter the main interface.
Read the “Privacy Policy”:
Tap the button to read the "Privacy Policy". Be sure to read and understand the content before
using it.
Read “User Notices”:
Tap the button to read the “User Notices”. Be sure to read and understand the content before using
it.
APP Version:
The information is the current APP version.
Main Interface

Pic. 61

Return to the Home Page:

Tap to return to the "Home Page".
Aircraft Status:
Displays the current status of the aircraft.

---28 ---
 EX4 Operation Manual
Flight Mode:
It displays the current flight mode. Tap to pop up the list and selectpreferred flight mode.
Please refer to the relevant instructions of the flight modes in this manual.
Camera Functions Menu:
From left to right:
Set the resolution of FPV transmission.
VR mode.
Main/secondary cameras switch: Select the gimbal camera or the optical flow camera.
Flip the FPV transmission image.
Digital zoom.
Camera Functions Menu Button
Tap to pop up the menu as shown in “ ”; tap again to hide the menu.
 GPS Signal
Display the GPS signal status of the current aircraft.
Aircraft Battery Status:
Displays the current aircraft battery status.
General Settings:
Tap to enter the general settings menu.
 Music Video (MV):
Tap to enter the “MV Video” menu. Please refer to the relevant introduction in this manual.
Gravity Sensor Mode:
Tap to enter the "Gravity Sensor Mode”. Please refer to the relevant introduction in this manual.
One Key Takeoff/Landing:
It displays icon ” ” before the aircraft takeoffs. Tap and the aircraft will automatically take off to
a height of 1.2 meters and hover.
It displays icon ” ” after the aircraft takeoffs. Tap and the aircraft will automatically descend to the
ground.
Return-To-Home (RTH)
Enter or exit the "RTH" function.
Map
Tap the map to zoom in to display the area that near the aircraft’s current location.
TF Card Status:
It displays “N/A” when a TF card is not installed. It displays the current storage status when a TF
card is installed.
Photo/Video Menu Button:
Tap to show or hide the photo/video menu.

---29 ---
 EX4 Operation Manual
Main Camera’s Pitch Angle Adjustment:
Tap to show or hide the slider that adjusts the pitch angle.
Video Recording:
Tap to start or stop recording.
 Photo Taking:
Tap to take a photo.
Album:
Tap to enter the album to view the photos and videos user has taken.
Left Joystick:
Please refer to the relevant introduction in this manual.
Aircraft Flight Status:
From left to right:
D:x m:Relative distance between the current position of the aircraft and its takeoff point;
H:x m:Relative height between the current position of the aircraft and its takeoff point;
HS:x.x m/s:Current horizontal flight speed of the aircraft;
VS:x.x m/s:Current vertical flight speed of the aircraft;
LP:x.x: Positioning status of the mobile device.
Right Joystick:
Please refer to the relevant introduction in this manual.
Main Camera’s Pitch Angle Adjustment Slider
Move the slider to adjust the camera’s pitch angle.
General Settings Menu
Tap the “...” button in the upper right corner of the Main Interface to enter the “General Settings”
menu as shown below.

Pic. 62

---30 ---
 EX4 Operation Manual
Beginner Mode On/Off
Before the aircraft takes off, the Beginner Mode can be turned on or off. The flight distance will be
greatly limited under Beginner Mode.
Virtual Joystick Setting:
Before the aircraft takes off, the virtual joysticks can be set as “Left-Hand Throttle” or “Right-Hand
Throttle”.
Alt Limit setting:
Limits the aircraft’s flight height before it takes off. The default height is 120m, and it can be set to
30m~500m.
Voltage:
Displays the current battery voltage of the aircraft.
Low Power Alarm
User can set the limit for the battery-low alarm. The default is 10%, and the range is from 10% to
80%.
 Sensor Calibration:
Vertical or horizontal compass calibration. Please refer to the relevant introduction in this manual.
 Pair RC
Remote control pairing. Please refer to the relevant introduction in this manual.
Firmware Version:
Tap to view the current application version, flight control firmware version, relay firmware version,
remote firmware version and image firmware version.
 Audio Recording:
Turn recording on or off (off is default). When turned on, user can record the audio on the mobile
phone while the aircraft camera is recording a video.
Distortion Correction
When turned on, it will correct the distortion of the photo taken by the wide-angle lens.
Gesture Recognition:
When turned on, user can control the camera to take photos or record videos with a specific
gesture. Please refer to the relevant introduction in this manual.
UnBind APP:
Unbind the current APP from the aircraft. Only after that, other users can bind this aircraft.

Flight Modes for APP

Position Mode：
The default flight mode is position mode. When the aircraft is positioned (the aircraft status
indicator is solid green), aircraft will be unlocked.
In this mode, the aircraft will be positioned automatically by GPS, so it has better flight stability and
safety.

---31 ---
 EX4 Operation Manual
● Note: It is recommended to use the default Position Mode for the first flight and select other
modes after user is familiar with the operation.
Please confirm the control mode before flying.
Altitude Mode：
In this mode, the aircraft only has vision positioning mode without GPS positioning, and the motion
of the aircraft is more flexible. It needs skilled operation to control the flight of the aircraft. In the
flight process, if the vision positioning condition is not satisfied (the front light flashing red), the
vision positioning function fails, and the motion of the aircraft relies on manual control.
After fully mastering the operation of Position Mode, user can select the Altitude Mode.
One Key RTH
If necessary, tap to start one key RTH.
The App will popup a confirmation notice, after ensuring that the current flight conditions meet the
requirements as the pop-up notice, tap “ok”.
Return-TO-Home (RTH)
If necessary, user can tap the RTH button “ ” to activate the automatic return function. After RTH
function is activated, the APP will pop up a confirmation notice. Then user need to make sure that
the current flight conditions meet the requirements as the pop-up confirmation notice and tap OK.
Next, the aircraft will then return intelligently with the takeoff point as the home point. All joysticks
cannot be controlled during the ascending (current height≤30 meters) and the return. During its
landing, user can use the joysticks to control the aircraft and decide its landing position.
Press the RTH button again during return will end it and user can control the aircraft again.

Pic. 59

Note: Only the aircraft is positioned by the GPS and there are no barriers around the takeoff site
can ensure an accurate return position.
Warning: During GPS positioning, the aircraft will automatically enter the RTH mode if:
1) The aircraft loses connection with the mobile phone;
2) The aircraft battery is low.
In RTH mode, if the aircraft’s current height is less than 30m, the aircraft will automatically rise to a
height of 30m before return; if greater than 30m, the aircraft will start to return at the current height.
The aircraft cannot be controlled during the return flight. Please make sure that there are no
barriers in the return route to avoid accidents.
Orbit Mode:
In Positioning Mode, when the Orbit Mode is activated, the aircraft will rotate around its current
position. At this time, controlling the aircraft to move forward or backward can adjust the orbiting
radius.

Pic. 63

---32 ---
 EX4 Operation Manual

Track Mode (with the GPS successfully positioned)

In Position Mode, when Track Mode is activated, the aircraft will automatically follow user’s mobile
device.
(1) Please pay attention to the GPS signal status in Track Mode:
Pic. 64
● Track Mode can be used when the GPS signal is full on the APP;
● Track Mode is not advised to be used when the GPS signal on the APP is
not full. If user need to use it, be sure to pay close attention to the aircraft
condition and the surrounding environment!
● Track Mode must not be used when the GPS signal on the APP is poor!
(2) How to track
The aircraft will target the phone and always keep the default distance (5 meters) to track.

Pic. 64

Warning: In order to ensure accurate return position, please choose a wide and open area (no large
buildings within 50 meters and no barriers within 10 meters) and ensure the GPS signal is
good so that the RTH function can work normally.
Ensure that the mobile phone is positioned successfully and accurately.
Waypoint Flying
Tap the map on the left corner on the APP main interface,it will pop up map / Waypoint Flying.

Pic.65

Pic.66

Ensure high battery level of the aircraft and the mobile phone before activating the Waypoint Flying
mode. Tap "Waypoint Flying" or "Flight Planning" after its takeoff and read through the notice. Tap
way-points on the screen and set the altitude (the defaultis 30 meters) on the right side of the
screen. Then tap "Start" to begin waypoint flying. user will see the aircraft fly towards the
pre-setpoints.
Tap "Stop" to exit Waypoint Flying mode. When the aircraft flies towards the final waypoint, it will
hover at that point.

---33 ---
 EX4 Operation Manual
Warning: Please tap the waypoints within the circle (in radius of 100 meters). When the Waypoint
Flying mode is turned off, the aircraft will hover. To restart it, user can tap new waypoints to turn on
this mode again. During its return of landing, the aircraft will automatically exit Waypoint Flying
mode and return to the home point or land on the ground.
Warning: For user personal and property safety, please use this function cautiously. Always
choose a open and spacious outdoor area away from crowds to fly the aircraft. Also always pay
attention to the flight environment and the flight altitude.

Photo and Video in APP

One-key photo taking/video recording:

Pic. 67

Tap the “Photo” button will take a photo and save it automatically.
Tap the “Camera” button and the button will turn red to start video recording. Tap the button again,
the button will change back to white, and the recording will stop.
If the TF card is installed on the aircraft, the photo and video will be stored in the TF card.
Otherwise, the photo and video will be saved in the APP's photo album.
the quality of video storage files is better on SD card,
Gestures to Take Photos and Videos

Pic.68

The aircraft has “Gesture Recognition”, and this function can be opened in the APP “General
Settings” menu. During the flight, the following gestures can be made in front of the aircraft
camera to control the camera to take photos and videos.
(1) Victory Gesture (Photos)
Face in front of the aircraft camera about 6 feet and make a “V” gesture with one hand.
Wait until the gesture recognized, the camera will shoot automatically after a
Pic. 69
3-seconds countdown.
(2) Square Gesture (Videos)
Face in front of the aircraft camera about 6 feet and make a square gesture near user
chin. Wait until the gesture recognized, the camera will start filming immediately. When
the square gesture is recognized the second time, the filming will end immediately.
(Interval between the first and second recognitions should be at least 3 seconds.)

---34 ---
 EX4 Operation Manual
(3) Palm Gesture (Videos)
Face in front of the aircraft camera about 6 feet, raise user hand and close user five fingers. Wait
until the gesture recognized, the camera will start filming immediately. When the palm gesture is
recognized the second time, the filming will end immediately. (Interval between the first and
second recognitions should be at least 3 seconds.)
Attention: To ensure a high recognition rate:
(1) Face the aircraft camera front;
(2) Please do it in a well-lit environment;
(3) Face in front of the camera about 6 feet before making a gesture.
The recognition rate reduced when:
(1) In a poor-lit or backlighting environment;
(2) Weak Wi-Fi signal or the signal is being interfered.

Adjust the Camera's Pitch Angle by APP

Adjust the camera upward or downward to achieve the best shooting angle and to capture the
perfect view when taking photos or videos.
When using the APP to control the aircraft, slide the scroll bar on the right side of the APP main
interface to control the pitch angle.

Pic. 70

Music Video (MV):

Go to the main interface of the App, tap "MV" button to enter the MV interface and edit MV.

Pic. 71

Image Rotation
Tap the icon “ ” to turn on the image rotation function.

---35 ---
 EX4 Operation Manual
Slide finger on the screen to rotate the image. Double tap the screen to zoom the image (this
operation also appliesto video recording).

Please Take proper operation and flight safety guidelines in mind as it is very important
for all of us.
For more information, please turn to Appendix.

---36 ---
 EX4 Operation Manual

Appendix
Specification
Size Fold: 177*90*55 mm（L X W X H）
Unfold: 177*196*70mm（L X W X H）
Wheelbase 216 mm
Weight (Battery & Propellers
Approximately 435g
Included)
Max Ascent Speed 3 m/s
Max Descent Speed 1.5 m/s
Max Speed 8m/s (GPSmode)
Max Service Ceiling Above
5000 m
Sea Level
Max Flight Time 25 min
Max Total Travel Distance 7 km
Operating Temperature 0°C~40°C
Range
Satellite Positioning Systems GPS/GLONASS
vertical： +/- 0.5 m
± 0.2 m（ultrasonic system,optical flow system works）
Hover Accuracy Range
horizonal： +/- 1.5m
± 0.3 m（ultrasonic system,optical flow system works）
Operating Frequency 5170-5190 GHz or 5735-5755 GHz
Maximum flight height 120m，maximum 500m (need to change setting on app)

Optical flow system

Operating Environment Surface with clear pattern and adequate lighting (lux >10)
Velocity Range ≤2m/s at 6.6 ft (2 m) above ground
Altitude Range 0.5~5m

Ultrasonic altitude system

except for surface of water or ground of absorbing material (such
Operating Environment
as thick carpet)
Velocity Range ≤<2m/s
Altitude Range 0.5~3m

3-axis gimbal
Stabilization 3-axis Brushless mechanical Stabilization
Controllable Range pitch：-90°~0°
Pitch：-120°~+45°
Rotating range Roll：-30°~+30°
Course：-15°~+15°

---37 ---
 EX4 Operation Manual
Camera
Sensor 1/2.7’’ CMOS；

lens FOV 100

video：100 - 3200
ISO range
photo：100 - 1600
Image Size 4072*3096（12mp）
Still Photography Modes Single shoot
Video Recording FHD：1920x1080
Resolution
Max Video Bitrate 13Mbps
Supporting file systems FAT32（≤32GB ）
Photo JPEG
Video MP4
Micro SD™
Supported SD Cards
Max capacity: 32GB. Class 10 or UHS-1 rating required
Operating Temperature 0°C~40°C
Range
Battery
Capacity 2400 mAh
Voltage 11.4 V
Type LiPo 3S
Energy 27.36 Wh
Net Weight Approximately 165g
Max charging power 30 W
charge time <4.5h(with 5V 2A adapter)
Charging Temperature 0°C~40°C
Range
APP /FPV
Mobile App Enjoy fly
Live View Quality 720P
Delay 260 ms
Required Operating Android 5.0 above，IOS 9.0 above
Systems
FPV transmission 1200m
distance
Charger
Input 5 V 2A(recommend)
Output 4.35V 0.7A×3
power 10 W

WI-FI
Operating Frequency 5G Hz
Max Transmission horizonal:200m，vertical:120m
Distance
Max Speed 10 km/h
Max Ascent Speed 2 m/s
Max Descent Speed 1.5 m/s

---38 ---
 EX4 Operation Manual
Remote Controller
Operating Frequency 5 GHz
Max Transmission
1200 m (Unobstructed, free of interference)
Distance
FCC：≤23 dBm
EIRP CE：≤14 dBm
SRRC: <=20dBm
Operating
300-500mA @ 3.7V
Current/Voltage
Battery capacity(built-in) 2600 mAh
Voltage 3.7 Ｖ
Type LiPo 18650 1S
Energy 9.62 Wh
Operating Temperature
0°C~40°C
Range
Port types USB
Charge USB
Maximum charge
5W
power
charge time < 3h(with 5V 2A adapter)

---39 ---
 EX4 Operation Manual

Warranty Information
Please browse the official website for the latest after-sales warranty information.
Packing Detail
The whole package includes the following parts, and if there are any defects, please contact the
seller or the local distributor.

Pic.72

Important Statement
1. This aircraft is not a toy, but model for enthusiasts. It should be assembled and operated properly.
2. Pilot must operate this aircraft in safe way. Improper operation may cause injury or property
damage
3. This aircraft is applicable for pilots aged 14+ who are with skilled flying experience
4. In case of problems such as usage, operation and maintenance, please contact the local
distributor or the relevant personnel of the company. Company and distributors are not liable for
any loss or damage caused by improper usage or operation and human injury.
5. Keep the small accessories away from kids to avoid accidents.

---40 ---
 EX4 Operation Manual
Flight Safety Guidelines
Remote control model aircraft is somewhat considered to be the highest danger potential article,
so it is necessary to keep away from the crowd when flying. The unpredictable accidents such as
inappropriate assembly or body damage, poor electronic control, and unfamiliar operation may
result in aircraft damage or personal injury. Users should pay attention to flight safety and be
aware of the responsibility for accidents caused by their own negligence.
● Stay away from obstacles, crowds
The flight speed and state of the remote control aircraft are uncertain, and there are potential
dangers. Flying must be far away from crowds, high-rise buildings, power lines and so on, while
avoiding flying in bad weather such as wind, rain, thunder and lightning. The debugging and
installation of the aircraft must be strictly controlled in accordance with the operating instructions.
Attention should be paid to keeping a distance of 1-2 meters between the aircraft and the users or
other persons during flight, so as to avoid the aircraft colliding with the head, face and body of the
person during flight and landing and causing injury.
● Keep the aircraft in dry environment
The aircraft is composed by sophisticated electronic components and mechanical parts. To avoid
damages on the mechanical and electronic components, please keep the aircraft in dry
environment
and use clean cloth to wipe the surface and keep it clean.
● Practice flying together with skillful pilot
Beginners are suggested to practice flying together with skillful pilot’s guidance. Do not fly alone.
● Bear proper operation and safe flight guidelines in mind
Please take a careful look at the manuals before flights for important information of product
functions and operation tips, and learn how to use the accessory, safe flight always comes first.
Stay informed of and abide strictly by relevant local laws and regulations. Keep away from any
non-flight zones and respect other people's privacy.
● Safe flying
Please make sure in good shape mentally before every flight. Fly the aircraft as per flying
experience. Never fly under influence of alcohol or drugs. Keep the remote controller at least 20
cm away from body when flying the aircraft, do not fly it close to ears! Misuse may lead to hearing
loss.
● Keep distance from a flying aircraft
Never use hands to touch a flying aircraft under any circumstance. Don’t approach and touch a
landed aircraft before its propellers are completely locked.
● Keep away from heat source
The aircraft is made of metal, fiber, plastic, electronic component and other material. Please keep
it away from the heat source to avoid deformation or even damage caused by sun exposure and
high temperature.
● Environmental protection requirements
To protect our blue planet, so please recycle the aircraft as per local laws and regulations.

---41 ---