Technical Data Sheet
Shell Spirax S5 ATF X
Premium, Synthetic Technology Multi-Vehicle Automatic Transmission Fluid
Shell Spirax S5 ATF X is a premium performance, synthetic technology fluid designed to meet the needs of multiple
vehicle types for service fill in automatic transmission service. Shell Spirax S5 ATF X meets the needs of many Asian
and North American designed automatic transmissions.
Performance, Features & Benefits Main Applications
· Friction Modified
Provides Consistent, Reliable, Smooth and Trouble Free
Operation of Automotive Transmission Systems.
· Exceptionally High Oxidation Resistance · Passenger car Automatic Transmissions
Resistant to oil Degradation and Keeps Automatic · Heavy Duty Automatic Transmissions
Transmissions Clean. · Power Steering Units
· Excellent Shear-Stability · Hydraulic Systems Requiring This Grade of Fluid
A Special 'VI' Improver Minimises the Changes in Viscosity Specifications, Approvals & Recommendations
With Operating Temperature.
Suitable for use in Applications Which Require
· Dependable Anti-Wear and Gear Protection
· Allison C-4
Long Component Life.
· Aisin JWS 3309 (all Applications)
· Low Temperature Performance · Jaso 1-A, 2A-02
Excellent oil Fluidity at low Temperatures.
· Ford Mercon® V, Mercon®
· Synthetic Base Fluids · General Motors Dexron®, Dexron® II, Dexron® III
Excellent Fluid Life in the Most Demanding Applications. · Toyota T III, T IV
For a Full Listing of Equipment Approvals and
Recommendations, Please Consult Your Local Shell Technical
Helpdesk, or the OEM Approvals Website.
Typical physical characteristics
Properties Method Shell Spirax S5 ATF X
Flash Point (COC) °C ASTM D92 190
Viscosity @-40°C mPa s ASTM D2983 12000
Viscosity @40°C mm²/s ASTM D445 35
Viscosity @100°C mm²/s ASTM D445 7.2
Density @15°C kg/m³ ASTM D1298 850
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics
may occur.
Page 1 of 2 Shell Spirax S5 ATF X, v 2 07.12.2012.01.50
Health, Safety & Environment
· Health and Safety
Shell Spirax S5 ATF X is Unlikely to Present any Significant Health or Safety Hazard When Properly Used in the Recommended
application and Good Standards of Personal Hygiene are Maintained.
Avoid Contact With Skin. Use Impervious Gloves With Used oil. After Skin Contact, Wash Immediately With Soap and Water.
Guidance on Health and Safety is Available on the Appropriate Material Safety Data Sheet, Which can be Obtained From
http://www.epc.Shell.com/
· Protect the Environment
Take Used oil to an Authorised Collection point. Do not Discharge Into Drains, Soil or Water.
Additional Information
· Colour
Shell Spirax S5 ATF X is Dyed red for Identification purposes.
· Advice
Advice on applications not covered here may be obtained from your shell representative.
Page 2 of 2 Shell Spirax S5 ATF X, v 2 07.12.2012.01.50
