Scribd
Upload
30 views1 page

Runners For Molding

This document provides information on the typical diameter ranges for runners or corrugated tubes according to the type of resin material. It lists various resin materials used and the minimum and maximum diameters, in inches, that are commonly used for each material type, ranging from as small as 0.062 inches to as large as 0.500 inches depending on the material. The document concludes by stating "Your future starts today!"

Uploaded by

DracoRodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views1 page

Runners For Molding

This document provides information on the typical diameter ranges for runners or corrugated tubes according to the type of resin material. It lists various resin materials used and the minimum and maximum diameters, in inches, that are commonly used for each material type, ranging from as small as 0.062 inches to as large as 0.500 inches depending on the material. The document concludes by stating "Your future starts today!"

Uploaded by

DracoRodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1Uno Convenciones

Material:
Tabla para corredores según
el tipo de resina

Diametro (in)

ABS, SAN 0.187-0.375


Acetal 0.125-0.375
Acrylic 0.312-0.375
Impact acrylic 0.312-0.500
Cellulose acetate 0.187-0.437
Cellulose acetate butyrate 0.187-0.375
Cellulose propionate 0.187-0.375
Ionomer 0.090-0.375
Nylon 0.062-0.375
Polyallomers 0.187-0.375
Polycarbonate 0.187-0.375
Polyethylene 0.062-0.375
Polypropylene 0.187-0.375
Polyphenylene oxide 0.250-0.375
Polysulfone 0.250-0.375
Polystyrene 0.125-0.375
Polyvinylidene Fluoride 0.125-0.312
Polyvinyl chloride (plasticized) 0.125-0.375

¡Tú futuro empieza hoy!

You might also like