0% found this document useful (0 votes)
120 views5 pages

Sprayset HBL74 & HBL75: High Performance Shotcrete Accelerators

This document discusses Fosroc's sprayset HBL74 and HBL75 shotcrete accelerators. These alkali-free accelerators provide faster setting of concrete, allowing greater productivity in tunneling projects. They control dust and rebound, and laboratory and site tests show setting times under 2 minutes and rebound reduced to under 8.5%. Fosroc manufactures these admixtures to high standards with extensive testing to ensure quality products for construction projects worldwide.

Uploaded by

dodsm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
120 views5 pages

Sprayset HBL74 & HBL75: High Performance Shotcrete Accelerators

This document discusses Fosroc's sprayset HBL74 and HBL75 shotcrete accelerators. These alkali-free accelerators provide faster setting of concrete, allowing greater productivity in tunneling projects. They control dust and rebound, and laboratory and site tests show setting times under 2 minutes and rebound reduced to under 8.5%. Fosroc manufactures these admixtures to high standards with extensive testing to ensure quality products for construction projects worldwide.

Uploaded by

dodsm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Sprayset HBL74 & HBL75

High Performance
Shotcrete Accelerators

www.fosroc.com constructive solutions


About
Fosroc International
Since the company’s beginnings over 80 years ago, Fosroc has developed into an
international leader in delivering Constructive Solutions for projects across a broad
range of market segments including transport, utilities, industrial and general
buildings. Sprayset
HBL74 & HBL75
Fosroc’s commitment to customer service and technical support is second to none.
We work closely with architects, structural engineers, contractors and owners to best
>> Higher productivity
understand their requirements. Together we can develop a bespoke solution for a
construction project, adding value and becoming more than just a materials supplier, >> Greater safety
but a solution provider. >> Reduced rebound
>> Reduced Dust
Fosroc has an extensive network of offices and manufacturing locations across
Europe, the Middle East, India, North, South and East Asia, and is further represented >> Adjustability
in other regions across the world by distributor and licensee partners. >> Cem I & II Compatible
>> Improved shelf-life
Selecting from the full portfolio of Fosroc products and services and integrating
expert technical support, world class customer service and innovation, Fosroc goes
beyond just product selling to ensure that we partner with our customers to deliver
complete constructive solutions.

>>Admixtures >>Grouts & Anchors


>>Adhesives >>Joint Sealants
>>Protective Coatings >>Surface Treatments
>>Concrete Repairs >>Grinding Aids
>>Industrial Flooring >>Waterproofing

Fosroc Shotcrete Solutions


FOSROC DELIVERs SOLUTIONS NOT
Sprayset HBL74 and HBL75 are Fosroc’s latest additions
JUST PRODUCTS to our shotcrete range. They are cutting-edge, alkali-
free shotcrete accelerators, providing a faster set to
your concrete.
CAD Details Project Specifications Site Support Seminar & Training
A library of standard Dedicated specification Expert product and Comprehensive The speed of acceleration will allow greater product
CAD details are managers on hand application support programme of build up in the tunnelling process. Dust and rebound
available, bespoke CAD to assist with correct made available from seminars and training
details can be created system choices and our specialist teams. courses designed to
are also controlled and have been verified in a number
for your specific project tailored solutions expand and reinforce of site trials.
your knowledge.

Sprayset HBL 74 and HBL75 are effective on both Cem I


and Cem II types, bringing advantages of cost reduction
to your project.

It is easy to control the dosage of Sprayset HBL to adjust


setting times to suit.

Fosroc’s continuing advancement in manufacturing and


Leader in delivering technical development has created a liquid that is more
stable than ever, meaning it can be transported further
Constructive Solutions and stored longer, even in extremes of temperature.

Worldwide! Fosroc Sprayset HBL74 and HBL75 work in combination


with or superplasticsers and are a great addition to the
rest of our tunnelling range.

1 www.fosroc.com www.fosroc.com 2
PRODUCT
PERFORMANCE
Sprayset HBL has been extensively tested in
laboratories and in controlled test facilities.

Vical Needle setting time tests (ASTM C191) are


conducted on specimens using CEM II Cements with
final setting times at under 2mins when dosed with
8% (by weight of cement) of Sprayset HBL 74.

The same test conducted with Sprayset HBL75 shows


a result of 105 seconds.

Tested in controlled site facilities , the amount of


rebound is calculated according to the weight of
rebound. Using 18.5% of CEM II rebound may be
controlled to just under 8.5%

HBL 74
SETTING TIME
HBL 75
160

140

TECHNOLOGY & QUALITY


120
Time (seconds)

Mix Design: Density 2428 kg/m3 Slump > 200mm 100

CEM II 450kg 18.53% 80


Fosroc is manufacturing admixtures for projects
60
Aggregates (5-8mm) 450 kg 18.53%
around the globe. We know concrete and we know
40
Sand (0-6mm) 1300 kg 153.5% our customers. That is why Fosroc can be seen on any
20
Superplasticiser Auramix 353G 5.85 kg 0.24% number of construction projects not just providing
0
Initial Set Final Set
Water 218.60 kg 9% admixtures, but blending the products to meet the
Fibers Fibercrete ST900 3.55 0.15% site demands.
Customers depend upon the consistency and
REBOUND
reliability of our products , and non more so
16
than customers applying shotcrete in the difficult
14
environment of a tunnel. We have dozens of
12
successful projects in Europe, the Middle-East, Asia
% Rebound

10 and the Americas where the products of Fosroc


8
have been a cornerstone of successful shotcrete
6
application.
4
We will be glad to assist you not only in the
2
application of your shotcrete needs but all of your
0
6% 8% other construction chemical and waterproofing
Accelerator Dosage (bwc) requirements.

3 www.fosroc.com www.fosroc.com 4
SHOTCRETE ADDITIVES SOLUTIONS TUNNELLING SOLUTIONS
Fosroc supplies all the ancillaries you will require for the successful production of shotcrete. Our technicians will be As well as top of the range shotcrete products, Fosroc provides a vast array of solutions for use in all tunnel building
on hand to create a bespoke mix-design catering for the specifics of the cements , sands and aggregates and the projects with references from around the world. Below is a sample of the solutions provided to the tunnelling
unique nature of your application, creating the perfectly blended mix from start to finish.

batching plant TBM


Superplasticisers - Auracast
Will create optimum slump retention and manage water content and Soil Conditioning foams and anti-abrasion Nitotunnel Range
bleeding to ensure optimum concrete performance and continued agents
pumpability.
Tunnel annulus grouting Cebex Admixtures
Polypropylene Fibres - Fibrecrete ST850 & ST900 Secondary gaskets: swallable strips Supercast SW
Fibres to reinforce your primary shell lining can be supplied by Admixtures for precast tunnel segments Auracast admixtures
Fosroc. They are supplied in water soluble bundles so dosage is easy
and dispersion eliminates blockage issues Mould release agents Auramol & Reebol
Repair of damaged & Leaking Segments Renderoc & Nitofill

delivery scl
Hydration Control - Conplast R1 Alkali-free Shotcrete Accelerators Sprayset HBL
Set retarder R1 will keep concrete mixes in a controlled liquid state Polypropylene Fibres Fibrecrete ST
for hours and can be easily added in controlled doses. This helps
manage concrete during periods of unexpected delays. Superplasticisers for primary and second- Auracast
ary lining

Heavy-duty PVC Waterstops Supercast PVC


PVC Geomembranes Proofex Alkorplan
Injection Nitofill

spraying c&c
Shotcrete Accelerators - Sprayset HBL
Superplasticisers for concrete casting Auracast
The range of shotcrete accelerators from Fosroc is provided to make
a perfect blend of performance versus budget. Our contractors Bonded Waterproofing Proofex Engage
trust our products that have been used extensively in shotcreteing
Heavy-duty PVC Waterstops Supercast
for many years. Sprayset HBL 74 and HBL75 will deliver optimal
performance to your project Self-adhesive Membranes Proofex 3000
Spray-on Membranes Polyurea WPE

5 www.fosroc.com www.fosroc.com 6
Fosroc offers a full range of construction chemical solutions, helping to protect structures
throughout the world. Please refer to our brochures, which include:

Details of your local Fosroc office can be found at


www.fosroc.com

Important Note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to
its standard terms and conditions of sale, copies of which may be obtained on request. Whilst Fosroc
endeavours to ensure that any advice, recommendation, specification or information it may give is
accurate and correct, it cannot, because it has no direct or continuous control over where or how its
products are applied, accept any liability either directly or indirectly arising from the use of its products,
whether or not in accordance with any advice, specification, recommendation or information given by it. constructive solutions

You might also like