Scribd
Upload
98 views

Data Communication and Networking Basic MCQ Set - Behrouz A Forouzan

The document contains 10 multiple choice questions each from 3 sets on topics related to data communication and networking basics. The topics covered include data communication systems, transmission modes, network topologies, internet service providers and protocols. Each question is followed by 4 answer options with one correct answer key provided at the end of each set.

Uploaded by

Anil Suman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
98 views

Data Communication and Networking Basic MCQ Set - Behrouz A Forouzan

The document contains 10 multiple choice questions each from 3 sets on topics related to data communication and networking basics. The topics covered include data communication systems, transmission modes, network topologies, internet service providers and protocols. Each question is followed by 4 answer options with one correct answer key provided at the end of each set.

Uploaded by

Anil Suman
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Downloaded from www.examradar.

com

Data Communication and Networking Basic MCQ Set –


behrouz A forouzan.

In this section of Data Communication and Networking – Data


Communication and Networking Basics MCQ (multiple choice)
Based Short Questions and Answers ,it cover the below lists of
topic, All the Multiple Choice Question and Answer (MCQs) have
been compiled from the books of Data Communication and
Networking by The well known author behrouz A forouzan.

1. Data communications system MCQs.


2. Simplex, half-duplex, or full-duplex MCQs.
3. Topology MCQs.
4. Local area network (LAN), Metropolitan-area network (MAN),
Wide area network (WAN) MCQs.
5. Internet service providers (ISPs) MCQs.

Data Communication and Networking Basics MCQ Set – 1

1. The _______ is the physical path over which a message travels.


A. Protocol
B. Medium
C. Signal
D. All the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

2. The information to be communicated in a data communications


system is the _______.
A. Medium
B. Protocol
C. Message
D. Transmission

3. Frequency of failure and network recovery time after a failure


are measures of the _______ of a network.
A. Performance
B. Reliability
C. Security
D. Feasibility

4. An unauthorized user is a network _______ issue.


A. Performance
B. Reliability
C. Security
D. All the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

5. Which topology requires a central controller or hub?


A. Mesh
B. Star
C. Bus
D. Ring

6. Which topology requires a multipoint connection?


A. Mesh
B. Bus
C. Ring
D. Star

7. Communication between a computer and a keyboard involves


_____________ transmission.
A. simplex
B. half-duplex
C. full-duplex
D. automatic

8. A television broadcast is an example of _______ transmission.


A. simplex
B. half-duplex
C. full-duplex
D. automatic
Downloaded from www.examradar.com

9. _______ connection provides a dedicated link between two


devices.
A. point-to-point
B. multipoint
C. primary
D. secondary

10. In a _______ connection, more than two devices can share a


single link.
A. point-to-point
B. multipoint
C. primary
D. secondary

Answer key for MCQ SET- 1


Q-1 Correct Answer: Medium
Q-2 Correct Answer: Message
Q-3 Correct Answer: Reliability
Q-4 Correct Answer: Security
Q-5 Correct Answer: Star
Q-6 Correct Answer: Bus
Q-7 Correct Answer: simplex
Q-8 Correct Answer: simplex
Q-9 Correct Answer: point-to-point
Q-10 Correct Answer: Multipoint

Data Communication and Networking Basics MCQ Set – 2

1. In _______ transmission, the channel capacity is shared by both


communicating devices at all times.
A. simplex
B. half-duplex
C. full-duplex
D. half-simplex

2. In the original ARPANET, _______ were directly connected


together.
A. IMPs
B. host computers
C. networks
D. routers

3. This was the first network.


A. CSNET
B. NSFNET
C. ANSNET
D. ARPANET
Downloaded from www.examradar.com

4. Which organization has authority over interstate and


international commerce in the communications field?
A. ITU-T
B. IEEE
C. FCC
D. ISOC

5. _______ are special-interest groups that quickly test, evaluate,


and standardize new technologies.
A. Forums
B. Regulatory agencies
C. Standards organizations
D. All of the above

6. Which agency developed standards for physical connection


interfaces and electronic signaling specifications?
A. EIA
B. ITU-T
C. ANSI
D. ISO

Downloaded from www.examradar.com


7. ______ is the protocol suite for the current Internet.
A. TCP/IP
B. NCP
C. UNIX
D. ACM

8. ______ refers to the structure or format of the data, meaning the


order in which they are presented.
A. Semantics
B. Syntax
C. Timing
D. All of the above

9. ________ defines how a particular pattern to be interpreted, and


what action is to be taken based on that interpretation.
A. Semantics
B. Syntax
C. Timing
D. None of the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

10 . _______ refers to two characteristics: when data should be sent


and how fast it can be sent.
A. Semantics
B. Syntax
C. Timing
D. none of the above

Answer key for MCQ SET- 2


Q-1 Correct Answer: full-duplex
Q-2 Correct Answer: IMPs
Q-3 Correct Answer: ARPANET
Q-4 Correct Answer: FCC
Q-5 Correct Answer: Forums
Q-6 Correct Answer: EIA
Q-7 Correct Answer: TCP/IP
Q-8 Correct Answer: Syntax
Q-9 Correct Answer: Semantics
Q-10 Correct Answer: Timing

Downloaded from www.examradar.com


Downloaded from www.examradar.com

Data Communication and Networking Basics MCQ Set – 3

1. Data flow between two devices can occur in a _______ way.


A. simplex
B. half-duplex
C. full-duplex
D. all of the above

2. In a ______ connection, two and only two devices are connected


by a dedicated link.
A. multipoint
B. point-to-point
C. (a) and (b)
D. none of the above

3. In a ________ connection, three or more devices share a link.


A. multipoint
B. point-to-point
C. (a) and (b)
D. none of the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

4. ______ refers to the physical or logical arrangement of a


network.
A. Data flow
B. Mode of operation
C. Topology
D. None of the above

5. Devices may be arranged in a _____ topology


A. mesh
B. ring
C. bus
D. all of the above

6. A _______ is a data communication system within a building,


plant, or campus, or between nearby buildings.
A. MAN
B. LAN
C. WAN
D. none of the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

7. A ______ is a data communication system spanning states,


countries, or the whole world.
A. MAN
B. LAN
C. WAN
D. none of the above

8. ________ is a collection of many separate networks


A. A WAN
B. An internet
C. a LAN
D. None of the above

9. There are ______________ Internet service providers.


A. local
B. regional
C. national and international
D. all of the above

Downloaded from www.examradar.com


Downloaded from www.examradar.com

10. A ________ is a set of rules that governs data communication.


A. forum
B. protocol
C. standard
D. none of the above

Answer key for MCQ SET- 3


Q-1 Correct Answer: all of the above
Q-2 Correct Answer: point-to-point
Q-3 Correct Answer: multipoint
Q-4 Correct Answer: Topology
Q-5 Correct Answer: all of the above
Q-6 Correct Answer: LAN
Q-7 Correct Answer: WAN
Q-8 Correct Answer: An internet
Q-9 Correct Answer: all of the above
Q-10 Correct Answer: protocol

Downloaded from www.examradar.com

You might also like