PD - 90337G

REPETITIVE AVALANCHE AND dv/dt RATED IRF150


HEXFET TRANSISTORS JANTX2N6764
THRU-HOLE (TO-204AA/AE) JANTXV2N6764
[REF:MIL-PRF-19500/543]
100V, N-CHANNEL
Product Summary
Part Number BVDSS RDS(on) ID
IRF150 100V 0.055Ω 38A

The HEXFETtechnology is the key to International

Rectifier’s advanced line of power MOSFET transistors.
The efficient geometry and unique processing of this latest
“State of the Art” design achieves: very low on-state resis-
tance combined with high transconductance; superior re-
TO-3
verse energy and diode recovery dv/dt capability.
The HEXFET transistors also feature all of the well estab-
lished advantages of MOSFETs such as voltage control,
Features:
very fast switching, ease of paralleling and temperature n Repetitive Avalanche Ratings
stability of the electrical parameters. n Dynamic dv/dt Rating
n Hermetically Sealed
They are well suited for applications such as switching
n Simple Drive Requirements
power supplies, motor controls, inverters, choppers, audio
n Ease of Paralleling
amplifiers and high energy pulse circuits.

Absolute Maximum Ratings

Parameter Units
ID @ VGS = 10V, TC = 25°C Continuous Drain Current 38
ID @ VGS = 10V, TC = 100°C Continuous Drain Current 24 A
IDM Pulsed Drain Current ➀ 152
PD @ TC = 25°C Max. Power Dissipation 150 W
Linear Derating Factor 1.2 W/°C
VGS Gate-to-Source Voltage ±20 V
EAS Single Pulse Avalanche Energy ➁ 150 mJ
I AR Avalanche Current ➀ 38 A
EAR Repetitive Avalanche Energy ➀ 15 mJ
dv/dt Peak Diode Recovery dv/dt ➂ 5.5 V/ns
TJ Operating Junction -55 to 150
o
TSTG Storage Temperature Range C
Lead Temperature 300 (0.063 in. (1.6mm) from case for 10s)
Weight 11.5 (typical) g

For footnotes refer to the last page

www.irf.com 1
08/21/01
IRF150

Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)

Parameter Min Typ Max Units Test Conditions
BVDSS Drain-to-Source Breakdown Voltage 100 — — V VGS = 0V, ID = 1.0mA
∆BV DSS /∆T J Temperature Coefficient of Breakdown — 0.13 — V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State — — 0.055 VGS = 10V, ID =24A➃
Ω
Resistance — — 0.065 VGS =10V, ID =38A ➃
VGS(th) Gate Threshold Voltage 2.0 — 4.0 V VDS = VGS, ID =250µA
Ω
g fs Forward Transconductance 9.0 — — S( ) VDS > 15V, IDS =24A➃
IDSS Zero Gate Voltage Drain Current — — 25 VDS=80V, VGS=0V
— — 250 µA VDS =80V
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward — — 100 VGS =20V
nA
IGSS Gate-to-Source Leakage Reverse — — -100 VGS =-20V
Qg Total Gate Charge 50 — 125 VGS =10V, ID= 38A
Q gs Gate-to-Source Charge 8.0 — 22 nC VDS =50V
Q gd Gate-to-Drain (‘Miller’) Charge 25 — 65
td(on) Turn-On Delay Time — — 35 VDD =50V, ID =38A,
tr Rise Time — — 190 VGS =10V,RG =2.35Ω
ns
td(off) Turn-Off Delay Time — — 170
tf Fall Time — — 130
LS + LD Total Inductance — 6.1 — nH Measured from the center of
drain pad to center of source
pad
Ciss Input Capacitance — 3700 VGS = 0V, VDS =25V
Coss Output Capacitance — 1100 — pF f = 1.0MHz
Crss Reverse Transfer Capacitance — 200 —

Source-Drain Diode Ratings and Characteristics

Parameter Min Typ Max Units Test Conditions
IS Continuous Source Current (Body Diode) — — 38
A
ISM Pulse Source Current (Body Diode) ➀ — — 152

VSD Diode Forward Voltage — — 1.9 V Tj = 25°C, IS =38A, VGS = 0V ➃

t rr Reverse Recovery Time — — 500 nS Tj = 25°C, IF = 38A, di/dt ≤100A/µs
Q RR Reverse Recovery Charge — — 2.9 µc VDD ≤ 30V ➃
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.

Thermal Resistance
Parameter Min Typ Max Units Test Conditions
RthJC Junction to Case — — 0.83
°C/W
RthJA Junction to Ambient — — 30 Typical socket mount

For footnotes refer to the last page

2 www.irf.com
 IRF150

Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics

Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance

Vs. Temperature

www.irf.com 3
IRF150

13 a& b

Fig 5. Typical Capacitance Vs. Fig 6. Typical Gate Charge Vs.

Drain-to-Source Voltage Gate-to-Source Voltage

Fig 7. Typical Source-Drain Diode Fig 8. Maximum Safe Operating Area

Forward Voltage
4 www.irf.com
 IRF150

RD
V DS

VGS
D.U.T.
RG
+
-V DD

VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %

Fig 10a. Switching Time Test Circuit

VDS
90%

10%
VGS
Fig 9. Maximum Drain Current Vs. td(on) tr t d(off) tf
Case Temperature
Fig 10b. Switching Time Waveforms

Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case

www.irf.com 5
IRF150

1 5V

L D R IV E R
VD S

RG D .U .T. +
- VD D
IA S A
VGS
20V
tp 0 .0 1 Ω

Fig 12a. Unclamped Inductive Test Circuit

V (B R )D S S
tp

Fig 12c. Maximum Avalanche Energy

Vs. Drain Current

IAS
Current Regulator
Fig 12b. Unclamped Inductive Waveforms Same Type as D.U.T.

50KΩ

12V .2µF
QG .3µF

+
10 V V
QGS QGD D.U.T. - DS

VGS
VG
3mA

IG ID
Charge Current Sampling Resistors

Fig 13a. Basic Gate Charge Waveform Fig 13b. Gate Charge Test Circuit

6 www.irf.com
 IRF150

Foot Notes:
➀ Repetitive Rating; Pulse width limited by ➂ ISD ≤ 38A, di/dt ≤300A/µs,
maximum junction temperature. VDD≤ 100V, TJ ≤ 150°C
➁ VDD =50V, starting TJ = 25°C, Suggested RG =2.35 Ω
Peak IL = 38A, VGS =10V ➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2%

Case Outline and Dimensions —TO-204AE (Modified TO-3)

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 08/01

www.irf.com 7