Scribd
Upload
187 views

Plug &: The ABUS Mini-RC Remote Control System

The ABUS Mini-RC is a remote control system for chain hoists. It provides a cost-effective wireless alternative to conventional safety radio remote control systems. The Mini-RC system includes a compact transmitter and receiver. The receiver plugs directly into the chain hoist in place of the pendant control. It offers functions like emergency stop and an integrated horn, and can control hoists from up to 30 meters away.

Uploaded by

Gibbs Per
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views

Plug &: The ABUS Mini-RC Remote Control System

The ABUS Mini-RC is a remote control system for chain hoists. It provides a cost-effective wireless alternative to conventional safety radio remote control systems. The Mini-RC system includes a compact transmitter and receiver. The receiver plugs directly into the chain hoist in place of the pendant control. It offers functions like emergency stop and an integrated horn, and can control hoists from up to 30 meters away.

Uploaded by

Gibbs Per
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

The ABUS Mini-RC remote control system

The intelligent solution for chain hoists

The ABUS Mini-RC safety remote


control system was designed
especially for the wireless control of
stand-alone chain hoists. It is suitable
for chain hoists with contactor-type
control and offers a cost-effective
alternative to conventional safety
radio remote control systems. The
Mini-RC is available in two versions,
one for stationary chain hoists and
one for chain hoists with electric travel
drives.

For the new


“ABUCompact” series …
Plug
… as well as for the
“New Classic” series

&

So schnell Play
Quick Replace the pendant control of your chain hoist with the
compact Mini-RC receiver with effortless ease.

Easy The new receiver is plugged in instead of the


pendant control. The transmitter and the
receiver are already tuned to each other and
can be operated immediately.

Safe Safety and alarm functions such as active and


passive emergency stop, the integrated horn and
the low battery alarm function with a buzzer signal
protect against hazardous operating conditions.

Economical The Mini-RC is a low-cost solution for your chain hoist.


.
.

Moving on up.
crane systems
Advanced high-performance components
The transmitter
■ easy-to-use controls The sturdy transmitter is small and light, The transmitter can be easily attached to the
■ compact design (65 x 122 x 30 mm) sits comfortably in the hand and is easy to operator’s belt using the sturdy belt clip on
■ low self weight (230 g including batteries) operate, ensuring reliable operation of the the back of the unit.
two-step controls.
■ four two-step buttons, two single step
buttons The red emergency stop button initiates
■ powered by three 1.5 V AA batteries or an active emergency stop command and
1.2 V rechargeable batteries immediately switches off the main con-
■ battery life about 1200 hours tactor. A passive emergency stop command
(alkaline batteries) with 10 % duty cycle is initiated if no other button is pressed for
■ low battery warning system with buzzer five seconds after a command has been
alarm given.
■ integrated antenna and piezo-electric A single-step horn button allows the
buzzer operator to warn personnel in the working
■ IP 65 plastic housing area of the hoist using the horn integrated
■ Range: up to 30 m in the receiver.
Lifting/lowering Lifting/lowering/
trolley travel

The receiver ➪ plug and play


■ easy plug-in installation The receiver is a very compact unit
■ advanced multiple frequency utilisation designed for plug and play installation on
■ teach-in function for address the hoist instead of the pendant control.
programming A Mini-RC control unit can therefore be
■ no-wear handling of control signals installed quickly and easily on an ABUS
■ easy maintenance with plug-type chain hoist.
connector
■ supply voltage 48 V +/- 20 % cycle
■ very compact unit (48x97x60 mm)
■ integrated antenna and horn

The technology
■ for 48 V chain hoists with contactor-type Multiple frequency utilization Freely programmable addressing
control
New transmission technology in the 868 MHz While the transmitter frequency is fixed, the
■ plug-type connection for easy retrofitting frequency band allows up to ten chain hoists receivers can be tuned to receivers by freely
■ for lifting and lowering to be controlled independently at the same programmable addressing using the teach-
■ active and passive emergency stop time using the same frequency. In addition, in function of the transmitter.
■ frequency: 868.35 MHz the high-frequency receivers used are
This ensures that transmitters can be
■ multiple frequency utilization very small and light. Control systems
replaced quickly and easily if necessary.
■ freely programmable addressing with 868 MHz relieve the burden on the
overloaded 433 MHz frequency band.
■ integrated horn
■ easy maintenance

Standard equipment Note: Instead of the normal batteries,


the unit can be operated with three
■ 1 Mini-RC hand-held transmitter rechargeable AA batteries with a voltage
■ 3 AA batteries of 1.2 V each. These batteries may be
■ 1 48 V AC receiver recharged using standard battery chargers.
709827/1000/7.04

■ 1 operating manual

Ace Crane Systems LLC


P.O.Box 231314, Dubai, UAE
Phone: +971 6 526 9080 · Fax: +971 6 526 9096 Moving on up.
crane systems
e-mail:[email protected]

You might also like