Scribd
Upload
2K views

Structure Engineer Certificate

This document is a certificate from a structure engineer certifying that: 1) The lift machine room slab and lift shaft for a building called [NAME] have been designed and constructed according to relevant standards and codes. 2) The lift machine room slab can support the imposed load of the lift machinery. 3) The lift shaft walls have adequate strength and two hours of fire resistance. 4) This certificate is being provided to comply with requirements of the Maharashtra Lift Rules 1958.

Uploaded by

Santosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

Structure Engineer Certificate

This document is a certificate from a structure engineer certifying that: 1) The lift machine room slab and lift shaft for a building called [NAME] have been designed and constructed according to relevant standards and codes. 2) The lift machine room slab can support the imposed load of the lift machinery. 3) The lift shaft walls have adequate strength and two hours of fire resistance. 4) This certificate is being provided to comply with requirements of the Maharashtra Lift Rules 1958.

Uploaded by

Santosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Draft below Format on Structure Engineer Letterhead (1 Copy/Lift)

Structure Engineer Certificate

Ref : Date :

CERTIFICATE

TO WHOM SO EVER OT MAY CONCERN

The Building named as “ ” having


SITE ADDRESS has been constructed/is under
construction. The Civil Bldg plans for the same are approved by Ex Engineer EEBP ……………. Municipal
Corporation ………../ Town Planner, ……….. Dist-………..vide……….. Lt No.…………………, having…… +G+
…… floors as per Approved Building Drawing.

This is to certify that, the lift machine room slab for lift for the above building has been designed by me us
in accordance with the specification of the elevator manufacture confirming the relevant I.S. and National
Building Code 2005 and the same is structurally sound ti take the imposed load of the machinery.

Also, it is certified that, the lift Shaft is constructed with water proof walls by bricks/RCC with Laminated
Toughened Glass having ……..mm thick (For Glass Shaft Only) had adequate Strength and have been designed
& constructed as per the requirement laid in The Maharashtra Lift Rules 1958,National Building Code 2005 and
relevant I.S. is having fire resistance of two hours.

This certificate is issued for complying the statutory Requirements laid in “The Maharashtra Lift Rules 1958”

Dated Signature of Architect


with Name & Designation
With Registration number Stamp

Copy To,
The Electrical Inspector (Lift Mumbai)
_______________________________
_______________________________
_______________________________

You might also like