Scribd
Upload
220 views3 pages

13.1 Carbonates: Calcium Oxide and Calcium Carbonate

Calcium carbonate is heated to produce calcium oxide, also known as lime. Lime is hydrated with water to form calcium hydroxide, or slaked lime. These products are used in various industrial processes. Limestone is used to manufacture iron and cement. It decomposes to lime which reacts with impurities in iron production. Cement is made by heating limestone and clay then treating with calcium sulfate and water. Calcium carbonate, lime, and slaked lime are also used to treat acidic soils and neutralize industrial waste by reacting with acids.

Uploaded by

Davies Masumba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
220 views3 pages

13.1 Carbonates: Calcium Oxide and Calcium Carbonate

Calcium carbonate is heated to produce calcium oxide, also known as lime. Lime is hydrated with water to form calcium hydroxide, or slaked lime. These products are used in various industrial processes. Limestone is used to manufacture iron and cement. It decomposes to lime which reacts with impurities in iron production. Cement is made by heating limestone and clay then treating with calcium sulfate and water. Calcium carbonate, lime, and slaked lime are also used to treat acidic soils and neutralize industrial waste by reacting with acids.

Uploaded by

Davies Masumba
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

13.

1 Carbonates
Calcium Oxide and Calcium Carbonate

Specific outcomes:

 Describe the manufacture of lime (calcium oxide) from calcium carbonate


(limestone) in terms of thermal decomposition
 Name some uses of lime and slaked lime such as in treating acidic soil and
neutralising acidic industrial waste products, e.g. flue gas desulfurization
 Name the uses of calcium carbonate in the manufacture of iron and
cement

Manufacture of lime

 Limestone consists mainly of calcium carbonate, CaCO3.


 Lime which is calcium oxide, is manufactured from calcium carbonate by thermal
decomposition:

CaCO3 →  CaO + CO2

 Slaked lime, calcium hydroxide, is made by adding a small amount of water slowly to
calcium oxide:

CaO + H2O →  Ca(OH)2

 Limewater is a solution of calcium hydroxide in water, hence it is alkaline.

 The addition of carbon dioxide to calcium hydroxide produces the initial starting
material, calcium carbonate:

CO2 + Ca(OH)2 → CaCO3 + H2O

 This reaction is the basis of the standard chemical test for CO2
Ca(OH)2 solution turns cloudy when in the presence of CO2 gas due to the formation of
insoluble white calcium carbonate

The combination of these three reactions constitutes the limestone cycle:

Diagram showing the stages in the limestone cycle

Uses of limestone and limestone products

 Limestone (calcium carbonate) is used in the manufacture of iron and cement.


 In the production of iron, limestone is added to the blast furnace where it decomposes
to form lime (CaO) and carbon dioxide.
 The lime reacts with silica impurities to form calcium silicate, which floats to the top
of the molten iron and is removed:

CaO + SiO2 → CaSiO3

 Cement is manufactured by heating a mixture of powdered limestone and clay in a


rotary kiln.
 Once heated, calcium sulphate and water are added which produce cement.
 Cement is a hardened, interlocked structure of calcium aluminate (Ca(AlO2)2 and
calcium silicate (CaSiO3).

 CaCO3 is also used in treating excess acidity in soils and lakes where it is often
preferred to lime because it does not make the water in the soil alkaline.
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
 Lime (calcium oxide) is used in lime mortar and in flue-gas desulfurization.
 Flue-gas desulfurization involves spraying acidic sulphur dioxide emissions with jets
of slaked lime to reduce pollution by neutralising these gases before they leave the
factory chimneys. CaO + SO2 → CaSO3
 Lime is also used in treating excess acidity in soils and lakes. If excess lime is used,
however, the water in the soil may become too alkaline.
 Slaked lime (calcium hydroxide) is used in treating acidic soils and neutralising acidic
industrial wasted products.

You might also like