Technical

Note
Directory
Please click on Drive or Product of interest

FMX5, FMX50 & FXM90

Focus 1 & Focus 3

Mentor II & Quantum III

Commander SE

Unidrive SP & Commander GP20

Unidrive Classic

Commander SK

SM-Fieldbus UD73, UD75 & UD77

Modules
CTIU

Tech Note Directory.doc v1.86 1 01/31/11

Technical Drive Topic
Note # Rev Family
CTTN110 1.1 Mentor II Armature Current Scaling
CTTN111 1.0 Mentor II/Quantum III Quantum III / Mentor II Current Loop
CTTN112 1.1 Unidrive Unidrive Hardware Fault Codes
CTTN113 1.0 Mentor II/Quantum III Snubber Networks in DC Drives
CTTN114 1.0 Unidrive/Mentor/Quantum CT Net Browser
CTTN115 1.0 Unidrive Voltage Trip Levels
CTTN116 1.0 FXM5 Latch up Prevention
CTTN117 1.0 Commander SE Use with CTIU
CTTN118 1.0 CTIU Update OS / Protocol
CTTN119 1.0 Focus 1 / Focus 3N Use w/Non-Standard Motors
CTTN120 1.0 Mentor II/Quantum III Serial E-Eprom Swap
CTTN121 1.0 Mentor II/Quantum III DC Motor Resistive Evaluation
CTTN122 1.0 Unidrive Setting Current Loop Gains
CTTN123 1.0 Commander SE Single-Phase operation of Low
Voltage 3-phase drives
CTTN124 1.0 Unidrive Servo Motor Selection
CTTN125 1.1 FXM50/90 Hi Current Field Regulators
CTTN126 1.2 Mentor II/Quantum III Setting up with Tach Feedback
CTTN127 1.0 Mentor II/Quantum III Replacing MDA6 Power Boards
CTTN128 1.1 Mentor II/Quantum III Field Weakening & Setup
CTTN129 1.0 Mentor II/Quantum III Applying FXM5’s with Size 2 Drives
CTTN130 1.1 Mentor II/Quantum III Line Current and KVA requirements
for a DC Drive
CTTN131 1.0 Mentor II Cooling Fan Wiring
CTTN132 1.0 UD75 CTNet Module UD75 Evaluation
CTTN133 1.2 UD77 DeviceNet Module UD77 Evaluation-Internal document
CTTN134 1.0 UD73 Profibus Module UD73 Evaluation
CTTN135 1.6 Quantum III/Mentor II Current Loop AutoTuning
CTTN136 1.0 General Oscilloscope Safety
CTTN137 1.0 AC PWM Drives Sinewave Filter connections
CTTN138 1.1 Mentor II/Quantum III FXM5 Setup Guide using Ribbon
CTTN139 1.0 Quantum III Chattering Contactor on Size 1
CTTN140 1.0 CTIU CTIU HMI and the RJ 45 Port
Connections
CTTN141 1.0 General Using VSCOM USB to RS-232 Adaptor
CTTN142 1.0 Ethernet Module Updating the SM-Ethernet Module
Firmware
CTTN143 1.0 Focus 3 Calibrating the OFFSET POT
*not yet released

Return to top

Tech Note Directory.doc v1.86 2 01/31/11

Technical Rev Drive Topic
Note # Family
CTTN144 1.0 Unidrive SP Essential Codes
CTTN145 1.0 Commander GP20 Essential Codes
CTTN146 1.0 Unidrive Classic Size 3/4 Modification for Use in Regen Apps
CTTN147 1.0 Mentor II Mentor II Setup Guide
CTTN148 1.0 Commander SK and SE Single-Phase Line Reactor Connections
CTTN149 1.3 Unidrive SP/Unidrive Classic Quick Setup/Check Out
CTTN150 1.1 Unidrive SP/DigitAx ST CTNET Setup and Troubleshooting
CTTN151 1.0 Mentor II/ Quantum III FXM5 Setup for Field Weakening - Stand
Alone Mode
CTTN152 1.0 Mentor II/ Quantum III FXM5 Setup –Stand Alone Mode
CTTN153 1.0 SM- Profibus SM-Profibus DP-V0 and DP-V1
CTTN154 1.0 Old Vector Drives Resetting to Factory Defaults
CTTN155 1.0 Unidrive SP Accommodating Single Ended Encoders
CTTN156 1.0 Affinity Replacing BA Module or Clock Battery
CTTN157 1.0 Mentor/Quantum MP Essential Codes

Return to top

Tech Note Directory.doc v1.86

3 01/31/11
 Technical
Note
Directory
Mentor II & Quantum III Technical Note Directory
Technical Drive Topic
Note # Rev Family
CTTN110 1.1 Mentor II Armature Current Scaling
CTTN111 1.0 Mentor II/Quantum III Quantum III / Mentor II Current Loop
CTTN113 1.0 Mentor II/Quantum III Snubber Networks in DC Drives
CTTN114 1.0 Unidrive/Mentor/Quantum CT Net Browser
CTTN120 1.0 Mentor II/Quantum III Serial E-Eprom Swap
CTTN121 1.0 Mentor II/Quantum III DC Motor Resistive Evaluation
CTTN126 1.2 Mentor II/Quantum III Setting up with Tach Feedback
CTTN127 1.0 Mentor II/Quantum III Replacing MDA6 Power Boards
CTTN128 1.1 Mentor II/Quantum III Field Weakening & Setup
CTTN129 1.0 Mentor II/Quantum III Applying FXM5’s with Size 2 Drives
CTTN130 1.1 Mentor II/Quantum III Line Current and KVA requirements for
a DC Drive
CTTN131 1.0 Mentor II Cooling Fan Wiring
CTTN135 1.6 Quantum III/Mentor II Current Loop AutoTuning
CTTN136 1.0 General Oscilloscope Safety
CTTN138 1.1 Mentor II/Quantum III FXM5 Setup Guide using Ribbon
CTTN139 1.0 Quantum III Chattering Contactor on Size 1
CTTN147 1.0 Mentor II Mentor II Setup Guide
CTTN151 1.0 Mentor II/ Quantum III FXM5 Setup for Field Weakening -
Stand Alone Mode
CTTN152 1.0 Mentor II/ Quantum III FXM5 Setup –Stand Alone Mode

Return to top

Quantum III/Mentor II Troubleshooting Guides

Tech Note Directory.doc v1.86 4 01/31/11

 Technical
Note
Directory

Focus 1 & Focus 3 Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN119 1.0 Focus 1 / Focus 3N Use w/Non-Standard Motors
CTTN136 1.0 General Oscilloscope Safety
CTTN143 1.0 Focus 3 Calibrating the OFFSET POT

Return to top

FXM5, FMX50, & FXM90 Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN116 1.0 FXM5 Latch up Prevention
CTTN125 1.1 FXM50/90 Hi Current Field Regulators
CTTN136 1.0 General Oscilloscope Safety
CTTN138 1.1 Mentor II/Quantum III FXM5 Setup Guide using Ribbon
CTTN151 1.0 Mentor II/ Quantum III FXM5 Setup for Field Weakening -
Stand Alone Mode
CTTN152 1.0 Mentor II/ Quantum III FXM5 Setup –Stand Alone Mode

Return to top

Quantum III/Mentor II Troubleshooting Guides

Tech Note Directory.doc v1.86

5 01/31/11
 Technical
Note
Directory
Unidrive Classic Technical Note Directory
Technical Drive Topic
Note # Rev Family
CTTN112 1.1 Unidrive Classic Unidrive Hardware Fault Codes
CTTN115 1.0 Unidrive Voltage Trip Levels
CTTN122 1.0 Unidrive Setting Current Loop Gains
CTTN124 1.0 Unidrive Servo Motor Selection
CTTN136 1.0 General Oscilloscope Safety
CTTN137 1.0 AC PWM Drives Sinewave Filter connections
CTTN146 1.0 Unidrive Classic Size 3/4 Modification for Use in Regen Apps
CTTN149 1.3 Unidrive SP/Unidrive Classic Quick Setup/Check Out

Return to top
AC Drive Troubleshooting Guides

Unidrive SP & Commander GP20 Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN115 1.0 Unidrive SP Voltage Trip Levels
CTTN136 1.0 General Oscilloscope Safety
CTTN137 1.0 AC PWM Drives Sinewave Filter connections
CTTN144 1.0 Unidrive SP Essential Codes
CTTN145 1.0 Commander GP20 Essential Codes
CTTN149 1.3 Unidrive SP/Unidrive Classic Quick Setup/Check Out
CTTN155 1.0 Unidrive SP Accommodating Single Ended Encoders

Return to top

AC Drive Troubleshooting Guides

Tech Note Directory.doc v1.86

6 01/31/11
 Technical
Note
Directory

Commander SE Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN117 1.0 Commander SE Use with CTIU
CTTN123 1.0 Commander SE Single Phase operation of Low Voltage
3-phase drives
CTTN136 1.0 General Oscilloscope Safety
CTTN137 1.0 AC PWM Drives Sinewave Filter connections
CTTN148 1.0 Commander SK and SE Single-Phase Line Reactor Connections

Return to top

Commander SK Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN115 1.0 Comm SK Voltage Trip Levels
CTTN148 1.0 Commander SK and SE Single-Phase Line Reactor Connections

AC Drive Troubleshooting Guides

CTIU Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN118 1.0 CTIU Updating OS and Protocol
CTTN136 1.0 General Oscilloscope Safety
CTTN140 1.0 CTIU CTIU HMI and the RJ 45 Port Connections

Return to top
Tech Note Directory.doc v1.86 7 01/31/11
 Technical
Note
Directory
SM- Fieldbus Module Technical Note Directory
Technical Drive Topic
Note # Rev Family
CTTN142 1.0 Ethernet Module Updating the SM-Ethernet Module Firmware
CTTN150 1.1 Unidrive SP/DigitAx ST CTNET Setup and Troubleshooting
CTTN153 1.0 SM- Profibus SM-Profibus DP-V0 and DP-V1

Return to top

UD73, UD75, & UD77 Modules Technical Note Directory

Technical Drive Topic
Note # Rev Family
CTTN132 1.0 UD75 CTNet Module UD75 Evaluation
CTTN133 1.2 UD77 DeviceNet Module UD77 Evaluation-Internal document
CTTN134 1.0 UD73 Profibus Module UD73 Evaluation
CTTN141 1.0 General Using VSCOM USB to RS-232 Adaptor

Return to top

Tech Note Directory.doc v1.86

8 01/31/11