www.beha-amprobe.

com

HD110C
Heavy-Duty Digital Multimeter
Rugged and reliable in harsh environments
The HD110C is designed for professional use in harsh environments. The meter is
unusually rugged and reliable in everyday heavy use applications. The meter is made
using waterproof construction to prevent dirt, grime and moisture from entering the
case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant
thermoplastic resistant to grease and chemical spills, with all sensitive components shock-
mounted for a drop resistant to at least eight feet. HD110C has an extended voltage
measurement capability of 1500 V dc and 1000 V ac, unmatched by any other line of
digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

• Highest voltage capability, measuring to • Magne-Grip™ holster, frees both hands

1500 V dc and 1000 V ac for work
• Special sealing for environment and water • CAT IV 1000 V rated
resistance. IP67 rated
• Includes high voltage test leads with
• Constructed with drop-resistant housing threaded alligator clipsincluded with
and PCB mounting the product

HD110C SPECIFICATIONS
Specifications HD110C
Display 3-1/2 digit LCD, 1999 counts, with annunciators and menu features
Polarity Indication Automatic
Input overload indication 1

Low Battery Indication ; < 50 hours battery life remain, accuracy is no longer guaranteed
Display Update Rate 2.5/sec, nominal
Oper. Temp. 0 °C to +50 °C, (< 75 % R.H.)
Storage Temp -20 °C to 60 °C, 0 to 80 % RH, battery removed
0.1 x (spec. accuracy)/°C (0 ° to 18 °C and 28° to 50 °C) all functions and ranges except for mVDC
Temperature coefficient
0.3 x (spec. accuracy)/°C (0 ° to 18 °C and 28° to 50 °C) for mVDC
Altitude Up to 2000 m — indoor use
Fuse F 2 A/1500 V fuse (8 mm x 65 mm), I.R. 30 kA – Amprobe p/n FP700
Power Standard 9 V battery, NEDA 1604, JIS 006P,IEC 6F22
Auto Power-Down Meter powers down after approx. 30 min. of inactivity.
Battery Life 250 hours typical with carbon-zinc, 500 hours typical with alkaline
Power 1.5 volt battery x2, R03/SIZE AAA. Isolated battery compartment
Battery life 150 hours typical with carbon-zinc. 300 hours typical with alkaline
Dimensions, with holster
200 x 102 x 59 mm (7.9 in x 4.0 in x 2.3 in)
(H x W x D)
Weight (incl. battery) 642 g (20 oz)
Safety Meets EN 61010-1 CAT IV 1000 V (1500 V DC max) Class II, EN 60529:IP67
EMC Meets EN 61326-1
Case material Flame retardant, high-impact thermoplastic
Heavy Duty CAT IV 1000 V Test leads with threaded alligator clips (TL1500), battery (in instrument), hex wrench in holster, Magne-
Included Accessories
Grip flex strap and User Manual
For more detailed specifications see users manual.

©2014 Beha-Amprobe. All rights reserved. For detailed specifications and ordering info go to www.beha-amprobe.com
 www.beha-amprobe.com

HD110C ELECTRICAL SPECIFICATIONS

DC Volts
Ranges 200 mV, 2 V, 20 V, 200 V, 1500 V
Resolution 0.1 mV
Accuracy ±(0.1 % rdg+2 dgts)
Input Impedance 10 MΩ
OL Protection 1500 V dc/1000 V ac rms
12 kV impulse (1.2 μS/50 μS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000 V product. This product should
Transient Protection
not be used in installations where transients exceed 12 kV.

AC Volts (45 Hz to 2 kHz)

Ranges 200 mV, 2 V, 20 V, 200 V, 1000 V
Resolution 0.1 mV
200 mV to 200 V (45-500 Hz) ±(0.8 % rdg+4 dgts)
200 mV to 200 V (500 Hz-2 kHz) ±(1.5 % rdg+5 dgts)
Accuracy
1000 V (50-60 Hz) ±(0.8 % rdg+4 dgts)
1000 V (60-500 Hz) ±(1.5 % rdg+5 dgts)
Input Impedance 10 MΩ
OL Protection 1500 V dc/1000 V ac rms
12 kV impulse (1.2 μS/50 μS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000 V product. This product should
Transient Protection
not be used in installations where transients exceed 12 kV.

DC Current
Ranges 200 μA, 2 mA, 20 mA, 200 mA, 2 A
Resolution 0.1 μA
200 μA to 20 mA ±(0.5 % rdg+2 dgts)
Accuracy
200 mA to 2 A ±(1.0 % rdg+2 dgts)

DC Current (cont.)
250 mV max. (1 mV/1 μA on 200 μA Range)
(100 mV/1 mA on 2 mA Range)
Voltage Burden (10 mV/1 mA on 20 mA Range)
(1.5 mV/1 mA on 200 mA Range)
(500 mV/1 A on 2 A Range)
OL Protection A Input (F 2 A/1500 V, size 8 x 65 mm IR fast blow ceramic) (FP 700)

AC Current (45 Hz to 1 kHz)

Ranges 200 μA, 2 mA, 20 mA, 200 mA, 2 A
Resolution 0.1 μA
200 μA to 20 mA ±(0.8 % rdg+4 dgts)
Accuracy
200 mA to 2 A ±(1.2 % rdg+4 dgts)
Voltage Burden 250 mV max. (1 V on 2 A range)
OL Protection same as DC Current

©2014 Beha-Amprobe. All rights reserved. For detailed specifications and ordering info go to www.beha-amprobe.com
 www.beha-amprobe.com

ACD-23SW ELECTRICAL SPECIFICATIONS

Resistance
Ranges 200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ, 20 MΩ
Resolution 0.1 Ω
200 Ω ±(0.5 % rdg+4 dgts)
2 kΩ to 200 kΩ ±(0.3 %rdg+2 dgts)
Accuracy
2 MΩ ±(1.0 % rdg+4 dgts)
20 MΩ ±(2.0 %rdg+4 dgts
OL Protection 1500 V dc/1000 V ac rms
200 Ω range 3.0 V dc typical
Open Circuit Voltage
all other ranges 0.3 V dc typical.

Diode/Continuity Test
Test Current 1m A dc typical
Test/Open Circuit Voltage 3.0 V dc Typical
Diode Accuracy ±(1.5 % rdg+2 dgts)
Continuity Audible Threshold <50 Ω ± 25 Ω
Response Time <100 msec
OL Protection 1500 V dc/1000 V ac rms
For complete specifications please download the product datasheet and the users manual on www.beha-amprobe.com.

Beha-Amprobe®
In den Engematten 14,
79286 Glottertal, Germany
Tlf.: +49 (0) 7684 8009 - 0

©2014 Beha-Amprobe. All rights reserved. For detailed specifications and ordering info go to www.beha-amprobe.com Pub ID: 13102-eng