Scribd
Upload
486 views

Breakout Strength

The document provides design data for checking the concrete breakout strength of anchors in tension. It gives the material properties of concrete, dimensions of the pedestal, plate size, bolt details, maximum tension values, and calculations for determining the concrete breakout strength for a corner anchor and four corner anchors based on code provisions. For a single corner anchor, the calculated breakout strength of 479.22 kN is less than the maximum tension of 93.75 kN, indicating it is adequate. However, for four corner anchors, the calculated breakout strength of 725.91 kN exceeds the maximum total tension of 750 kN, meaning it is not adequate.

Uploaded by

waquarstr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
486 views

Breakout Strength

The document provides design data for checking the concrete breakout strength of anchors in tension. It gives the material properties of concrete, dimensions of the pedestal, plate size, bolt details, maximum tension values, and calculations for determining the concrete breakout strength for a corner anchor and four corner anchors based on code provisions. For a single corner anchor, the calculated breakout strength of 479.22 kN is less than the maximum tension of 93.75 kN, indicating it is adequate. However, for four corner anchors, the calculated breakout strength of 725.91 kN exceeds the maximum total tension of 750 kN, meaning it is not adequate.

Uploaded by

waquarstr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CONCRETE BREAKOUT STRENGTH CHECK FOR ANCHOR IN TENSION

DESIGN DATA
Charactersitic Cylinder Strength of concrete = 25 N/mm2
Width of Pedestal = 650 mm
Depth of Pedestal = 650 mm
Height of Pedestal = 2900 mm
Base Plate Size = 400X 400 X 32 mm
Dia of bolt = 2.4 cm
No. of bolts = 8
Maximum Anchorage Length Provided = 650 mm
Maximum Total Tension 750 KN (Refer Tower Design Report)
Max Tension = 93.75 KN
Anchor Bolt edge distance = 650 mm
Area of Anchor Bolt = 4.58 cm2
Mini Spacing Between Anchor 300 mm

Concrete breakout strength of Corner anchor in tension

(Refer D.5.2.1,Page no-437)

433.33 hef

Anchor Bolt

Camin = 650 mm
Camax = 650 mm Φ = 0.85
hef = 433.3333 mm (Refer Appendix D,RD 5.2.3 Page no-438)
ANC = 1.69 m2
ANCO = 9 x hef² = 1.69 m2
Ѱed,N = 0.7 + 0.3 (Ca,min/1.5hef)= 1.0000
ѰcN = 1.25 (Refer Appendix D,Page no-441)
ѰcpN = 1.000 (Refer D.5.2.7 , Page no-441)
Nb = 10 ƛ (fc)^(1/2) x hef^(1.5)
ƛ = 1 (Refer 8.6.1,Page no-107)
Nb = 451.03 KN
Ncb = 563.78 KN
ΦNcb = 479.22 KN < 93.75 KN Hence ok
Concrete breakout strength of Four Corner anchor in tension

(Refer D.5.2.1,Page no-437)

433.33 hef

Anchor Bolt

hef = 433.33 mm
Camin = 650 mm Φ = 0.85
Camax = 650 mm
S1 = 300 mm
ANC = 2.56 m2
ANCO = 9 x hef²= 1.69 m2
Ѱed,N = 0.7 + 0.3 (Ca,min/1.5hef) 1.0000
ѰcN = 1.25 (Refer Appendix D,Page no-441)
ѰcpN = 1.000 (Refer D.5.2.7 , Page no-441)
Nb = 10 ƛ (fc)^(1/2) x hef^(1.5)
ƛ = 1 (Refer 8.6.1,Page no-107)
Nb = 451.03 KN
Ncb = 854.0 KN
ΦNcb = 725.91 KN > 750.00 KN Not ok

You might also like