Scribd
Upload
2K views

XPIC Tutorial

XPIC (Cross-polarization interference cancellation) technology doubles wireless capacity over the same channel by transmitting two independent signals using orthogonal polarizations. It enables separate data streams to be transmitted simultaneously via horizontal and vertical polarization. While this doubles capacity, it also causes interference between the signals. XPIC systems address this by processing the signals to filter out and cancel the cross-polarization interference, allowing both signals to be successfully received. Provigent introduced the first silicon-based XPIC solution, the PVG310, which uses advanced signal processing to implement CCDP (co-channel dual polarization) and migrate networks to the technology while maintaining compatibility. This allows operators to reduce costs by utilizing spectrum more efficiently.

Uploaded by

Nnaji Maurice
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

XPIC Tutorial

XPIC (Cross-polarization interference cancellation) technology doubles wireless capacity over the same channel by transmitting two independent signals using orthogonal polarizations. It enables separate data streams to be transmitted simultaneously via horizontal and vertical polarization. While this doubles capacity, it also causes interference between the signals. XPIC systems address this by processing the signals to filter out and cancel the cross-polarization interference, allowing both signals to be successfully received. Provigent introduced the first silicon-based XPIC solution, the PVG310, which uses advanced signal processing to implement CCDP (co-channel dual polarization) and migrate networks to the technology while maintaining compatibility. This allows operators to reduce costs by utilizing spectrum more efficiently.

Uploaded by

Nnaji Maurice
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

November 2004

Doubling Capacity in Wireless Channels

Introduction
During the last decade, service providers have adopted and introduced to the market many
services that require high capacity. Technologies like xDSL, cable modem, wireless
transmission and fiberoptic transmission have been developed to satisfy the bandwidth hunger.
In each segment, a large portion of the technology moved from big and complex systems to
simple and highly integrated silicon-based solutions. This evolution brought several
technologies to the general availability stage, making it possible for many companies to develop
and provide such solutions.

Cross-polarization interference cancellation (XPIC) technology was developed to double the


wireless capacity over the same channel. Using merchant silicon, Provigent Inc. is the first
silicon company to introduce such a solution and to make it generally available.

Advantages of wireless links


Wireless systems are commonly used for both public and private networks. These systems are
used not just in rural areas, where it is expensive or impossible to deploy wires, but also as cost-
effective alternatives to wired solutions in urban areas. In addition, wireless systems are the
technology of choice not just for mobile networks but also for the access, metropolitan and core
networks where mobility is not required.

As network capacity grows and predicting the required capacity becomes difficult, providers
prefer to deploy flexible and modular networks, and wireless systems are far more flexible than
other transmission technologies. The flexibility and easy installation of wireless systems make it
the preferred solution for public as well as private networks. For example, wireless networks
enable easy and cost-effective capacity increases, depending on the network evolvement. It also
makes it easy to remove and reinstall equipment from site to site.

XPIC Technology
XPIC technology doubles the capacity of wireless transmission, a clear advantage to the network
operator at the dense frequency bands. Microwave radio energy travels in waves, transmitting in
both horizontal and vertical directions. This physical phenomenon enables the transmission of
RF waves on both polarizations at the same time. Figure 1 illustrates single-polarization
transmission, and Figure 2 depicts co-channel dual-polarization (CCDP) transmission.

Provigent Inc. Los Altos, CA USA


www.provigent.com
November 2004

Figure 1: Single-polarization transmission

Figure 2: Co-channel dual-polarization transmission

CCDP operation provides two parallel communication channels over the same link with
orthogonal polarizations, thus doubling the link capacity. Separate and independent signals are
transmitted over the same wireless channel using single antenna. However, despite the
orthogonality of the two signals, some interference between the signals almost inevitably occurs,
due to imperfect antenna isolation and channel degradation. In order to cancel the effects of this
interference, the receiver may include an XPIC, which processes and combines the signals from
the two receiving paths to recover the original, independent signals. Figure 3 shows the high-
level block diagram of an XPIC system.

Provigent Inc. Los Altos, CA USA


www.provigent.com
November 2004

Figure 3: XPIC block diagram

Each polarization demodulator path receives a large signal from the opposite polarization,
causing cross-polarization interference. XPIC systems filter the cross-polarization interference
signal in order to successfully receive or decode the desire signal. This way, two separate data
streams can be transmitted over the same channel.

In XPIC technology, each polarization path receives both the polar signal and the cross-polar
signal. The receiver subtracts the cross-polar signal from the polar signal and cancels the cross-
polar interference.

An XPIC solution doubles the wireless link capacity and enables operators to reduce operating
expenditures in terms of their frequency license fee. For example, the FCC divides the spectrum
into 28MHz slices. In order to transmit OC-3 (155Mbps) over the 28MHz band,
a 7-bit/Hz modulation is required. Two OC-3 channels can be transmitting over the same
28MHz channel using XPIC technology.

Provigent’s PVG310 XPIC solution uses advanced signal processing techniques that allow easy
migration from traditional systems that use single polarization to CCDP operation using XPIC
technology systems.

Systems based on the PVG310


1) Can be installed using existing radio equipment, as the two receivers can be non-
synchronized. In addition, cable length differences between the horizontal ODU-IDU
and the vertical ODU-IDU are allowed;
2) Achieve improved XPD tolerance and improved notches performance.

For additional information:


[email protected]

Provigent Inc. Los Altos, CA USA


www.provigent.com

You might also like