Scribd
Upload
117 views3 pages

Advanced Engineering Materials: Material Safety Data Sheet

This document provides a material safety data sheet for aluminum doped zinc oxide (AZO). It lists the manufacturer as Advanced Engineering Materials and provides the chemical formula as Al2O3/ZnO. The physical properties listed include that it is a white to yellowish powder or pieces that is insoluble in water and odorless. Health effects of inhalation include potential fatality. Proper precautions should be taken such as wearing protective equipment and providing ventilation when handling to avoid inhalation, ingestion or skin/eye contact.

Uploaded by

Jason Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views3 pages

Advanced Engineering Materials: Material Safety Data Sheet

This document provides a material safety data sheet for aluminum doped zinc oxide (AZO). It lists the manufacturer as Advanced Engineering Materials and provides the chemical formula as Al2O3/ZnO. The physical properties listed include that it is a white to yellowish powder or pieces that is insoluble in water and odorless. Health effects of inhalation include potential fatality. Proper precautions should be taken such as wearing protective equipment and providing ventilation when handling to avoid inhalation, ingestion or skin/eye contact.

Uploaded by

Jason Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Advanced Engineering Materials

Address: Rm. 408, Building 1, No. 31, Tel: 86-0731-89578196


Yinshan Road, Yuelu District Changsha, Email: [email protected]
Hunan 410013 China Web: www.aemdeposition.com

Current Version: 1.0


Revision Date: Apr 25, 2018

Material Safety Data Sheet


Identity: AZO (Aluminum doped Zinc Oxide) Formula: Al2O3/ZnO

SECTION I - GENERAL INFORMATION


Manufacturer: ​ Advanced Engineering Materials Limited (AEM)

The information below is believed to be accurate and represents the best information available to AEM. However,
AEM makes no warranty, expressed or implied with respect to such information and assumes no liability resulting from
its use.

SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

CAS # OSHA/PEL ACGIH/TLV %


1314-13-2 /1344-28-1 15 mg/m3 10 mg/m3 N/A

SECTION III – PHYSICAL/CHEMICAL CHARACTERISTICS

Physical States: Solid

Boiling Point: N/A Vapor Pressure (vs. air or mm Hg): N/A


Melting Point: N/A Specific Gravity: (H2O=1): N/A
Evaporation Rate: N/A Flash Point: N/A
Solubility in Water: Insoluble
Appearance and odor: White to yellowish powder and pieces, odorless

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Method Used: Unknown Explosive Limits: LEL: N/A UEL: N/A


Extinguishing Media: Use suitable media for surrounding materials and type of fire.

Special Fire Fighting Procedures:


Firefighters must wear full face, self-contained breathing apparatus with full protective clothing to prevent contact with
skin and eyes. Fumes from the fire are hazardous. Isolate runoff to prevent environmental pollution.

Unusual Fire and Explosion Hazards:


-When heated to decomposition zinc oxide may emit toxic fumes of ZnO. may explode when mixed with chlorinated
rubber. violent reaction with magnesium, linseed oil. may polymerize violently (heat) with ethylene oxide. reacts violently
(flames) with chlorine trifluoride.
Advanced Engineering Materials
Address: Rm. 408, Building 1, No. 31, Tel: 86-0731-89578196
Yinshan Road, Yuelu District Changsha, Email: [email protected]
Hunan 410013 China Web: www.aemdeposition.com

SECTION V - REACTIVITY DATA

Stability: Stable
Conditions to Avoid (instability): Decomposition will not occur if used and stored according to specifications.
Incompatibility: Aluminum, hexachloroethane, chlorinated rubber, linseed oil, Magmesium acids, bases, oxidizing agents,
interhalogens, halocarbons
Hazardous Decomposition or Byproducts: Zinc Oxide, Aluminum Oxide
Hazardous Polymerization: will not occur.
Conditions to avoid (hazardous polymerization): None.

SECTION VI - HEALTH HAZARD DATA

Routes of entry: Inhalation? Fatal Skin? May cause irritation Eyes? May cause irritation
Ingestion? Fatal Other? No

Aluminum compounds have many commercial uses and are commonly found in industry. Many of these materials are
active chemically and thus exhibit dangerous toxic and reactive properties. Inhalation of fine aluminum oxide particles is
associated with shaver's disease (Sax, Dangerous Properties of Industrial Materials, eighth edition).

Zinc compounds have variable toxicity, but generally are of low toxicity. Zinc is not inherently a toxic element. However,
when heated, it evolves a fume of zinc oxide which, when inhaled fresh, can cause a disease known as "brass founders"
"ague," or "brass chills". Zinc oxide dust which is not freshly formed is virtually innocuous. There is no cumulative effect
from the inhalation of zinc fumes. (Sax, Dangerous Properties of Industrial Materials, eighth edition).

Signs and Symptoms of Overexposure:


Effects of Exposure: (To the best of our knowledge the chemical, physical and toxicological properties of aluminum
selenide have not been thoroughly investigated and recorded.)

Health Hazards (Acute and Chronic):

Inhalation: Remove person to fresh air. provide artificial respiration if breathing has stopped.
Ingestion: Seek medical attention if symptoms persist.
Skin: Wash thoroughly with soap & water.
Eye: Flush eyes with lukewarm water, lifting upper and lower eyelids, for atleast 20 mins. seek medical attention if
symptoms persist.

Target Organs:
Carcinogenicity: NTP? No IARC Monographs? No OSHA Regulated? No
Medical Conditions Aggravated by Exposure: Respiratory conditions first aid.
Advanced Engineering Materials
Address: Rm. 408, Building 1, No. 31, Tel: 86-0731-89578196
Yinshan Road, Yuelu District Changsha, Email: [email protected]
Hunan 410013 China Web: www.aemdeposition.com

Emergency and First Aid Procedures:


Inhalation: Remove to fresh air; keep warm and quiet; give oxygen if breathing is difficult and seek medical attention.
Ingestion: Provide 1-2 glass of milk or water and induce vomiting if conscious, seek immediate medical attention.
Skin: Remove contaminated clothing, brush material off skin, wash affected area with mild soap and water,
medical help will be needed if symptom persist.
Eye: Rinse eye for several minutes under running water. then consult a doctor if symptoms persists.

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

Steps to be taken in case material is released or spilled:


Wear appropriate respiratory and protective equipment. isolate spilled area and provide ventilation. vacuum up spill
area with high efficiency particulate absolute air filter and provide ventilation take care not raise dust.

Waste disposal method:


In accordance with local, state and federal regulations.

Hazard Label Information: N/A

Precaution: This safety data sheet should be used in conjunction with technical sheets. it does not replace
them. the information given is based on our knowledge of this product, at the time of publication. it is given
in good faith. the attention of the user is drawn to the possible risks incurred by using the product for any
other purpose other than that for which it was intended. this does not in any way excuse the user from
knowing and applying all the regulations governing his activity. it is the sole responsibility of the user to
take all precautions required in handling the product. the aim of the mandatory regulations mentioned is to
help the user to fulfill his obligations regarding the use of hazardous products.

Please be advised that N/A can either mean Not Applicable or No Data Has Been Established

You might also like