Scribd
Upload
373 views

Blink2 Manual English

This document provides instructions for connecting and using the bLink2 device to flash ECUs from various apps and tools. The bLink2 connects to ECUs via Bluetooth within 5 meters and requires a minimum vehicle voltage of 11.5V. It can only be linked to one ECU at a time and the flashing process takes time. The document outlines how to connect bLink2 to specific ECUs using SpeedTuning Super, RCmini5 Flash Tool, and aRacer Smart apps. It also describes bLink2 firmware updating and indicator light statuses.

Uploaded by

fairoza_gplm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
373 views

Blink2 Manual English

This document provides instructions for connecting and using the bLink2 device to flash ECUs from various apps and tools. The bLink2 connects to ECUs via Bluetooth within 5 meters and requires a minimum vehicle voltage of 11.5V. It can only be linked to one ECU at a time and the flashing process takes time. The document outlines how to connect bLink2 to specific ECUs using SpeedTuning Super, RCmini5 Flash Tool, and aRacer Smart apps. It also describes bLink2 firmware updating and indicator light statuses.

Uploaded by

fairoza_gplm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

bLink2 User Manual Note：

• Suggest the connection distance between bLink and


ECU < 5M
• Minimum voltage of vehicle >11.5V
• Special ECU model need to wait 5 sec to link.
• Use bLink to flash ECU, the process will take much time.
• bLink and iLink can not link with ECU at the same time.

1. System Descriptions Speed Tuning Super


& RCmini5 Flash Tool

aRacer APP
2. Connect to RC Super ECU by blink2
2.1 Open SpeedTuning Super and Click to search
bLink module
2.2 Double click bLink module to link. 3. Connect to RCmini5 ECU by blink2
Default paired number：0000
3.1 Open RCmini5 Flash Tool and Click to
search bLink module

2.3 SpeedTuning Super linked with RC super ECU

3.2 Double click bLink module to link.


Default paired number：0000
3.3 RCmini5 Flash Tool linked with RCmini5 ECU 4.2 Open ① the main menu and click ② Settings

①
②

4.3 Click ③ the Scan of devices button. Select ④ the


4. aRacer Smart bLink module and ⑤ Fill in the default pair number
4.1 Download aRacer Smart from Google Play (0000) and ⑥ click OK .
Store or Apple APP Store and install aRacer Smart.

③
⑥

④
⑦ click the back button then ⑧ aRacer Smart 5. bLink Indicator Light Descriptions
linked with RCmini5.

⑧ ECU link status indicator


(Red)

Bluetooth status indicator


(Blue)

5.1 Bluetooth status indicator ：


Flash：Unlink
Double flash：Link

5.2 ECU link status indicator：


Red light on：ECU and bLink2 link
⑦ Red Light flash quickly(5Hz)：ECU (RC Super、RCmini
Plus2、RCmini5) and bLink2 unlink

Red Light flash slowly(2Hz)：ECU (RC1、RCmini Plus、


RCmini 4C) and bLink2 unlink
6. bLink Firmware Update 6.4 Check the ④ Device Name and put new PIN Code
6.1 Download the bLink Flash Tool from aRacer (XXXX) of bLink module. Select ⑤ Target ECU and
Speedtek website. (http://www.aracer-speedtek.com) click ⑥
And install the bLink Flash Tool.

6.2 Open bLink Flash tool. Click ① download the


firmware and click ② to search bLink module
④

② ⑤

①
6.5 Click ⑦ to flash bLink module
6.3 Select the ③ bLink module

③ ⑦

You might also like